Wurth Elektronik - 74279244

The Wurth Elektronik 744822120 Data Line Filter has a rated voltage of 250V, inductance of 20000uH, and max operating temperature of 125°C. It is UL approved with 2 functions and suitable for applications requiring noise suppression in data lines.

Murata Manufacturing's BLM18BD182SN1D is a chip bead data line filter with 2 terminals, rated current of 0.05A, and output impedance of 1800 ohm. It operates b/w -55 to 125 °C and has dimensions of L1.6XB0.8XH0.8 (mm). Ideal for surface mount applications in filtering frequencies from 100 MHz with max DC resistance of 1.5 ohm.

BLM18PG471SH1D by Murata is a chip bead data line filter with AEC-Q200 screening. It has 2 terminals, measures 1.6x0.8x0.8mm, and offers an output impedance of 470 ohm at a rated current of 1A. Ideal for surface mount applications, it operates b/w -55 to 125°C and is designed for frequencies ranging from 100 MHz with max DC resistance of 0.2 ohm.

TDK's ACT1210-510-2P-TL00 is a Data Line Filter with 2 functions, 10 Mohm min. insulation resistance, and 80V rated voltage. AEC-Q200 screened, it operates b/w -40 to 150 °C and has an inductance of 51uH. Ideal for applications requiring noise suppression in automotive electronics.

DATA LINE FILTER; Maximum DC Resistance: .05 ohm; Rated Current: 1.5 A; No. of Functions: 2; Maximum Operating Temperature: 85 Cel; Height: 1.9 mm;

Murata Manufacturing's NFE61HT332Z2A9L is a DATA LINE FILTER with 100V rated voltage, 3300uF capacitance, and 2A rated current. It is used in automotive applications due to AEC-Q200 screening level and operates b/w -55°C to 125°C temperature range.

Taiyo Yuden's FBMH3216HM221NT8 is a Ferrite Chip Data Line Filter with 2 terminals, rated for 4A current. It offers an output impedance of 220 ohms, operates b/w -40°C to 125°C, and has a max DC resistance of 0.02 ohm. Ideal for surface mount applications requiring noise suppression in data lines.

Wurth Elektronik 742792602 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with dimensions of L1.6xB0.8xH0.8 mm and output impedance of 60 ohm at frequencies ranging from 100 MHz to 600 MHz.

Wurth Elektronik 742792042 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C and has a DC resistance of 0.5 ohm. With dimensions of L2.0XB1.2XH0.9 (mm), it offers an output impedance of 600 OHM at frequencies ranging from 100 MHz to 180 MHz.

DATA LINE FILTER MODULE; Maximum DC Resistance: .014 ohm; Rated Current: 10 A; No. of Functions: 1; Height: 11.7 mm; Width (mm): 27.9;

Vicor's MQPI-18LP-01 is a 28V data line filter with 10 terminals, rated for 7A current. With a temperature range of -55 to 125°C, it offers an output impedance of 50Ω. Ideal for surface mount applications, this compact filter measures L24.867xB12.421xH3.353mm and is suitable for various electronic devices requiring noise suppression in data lines.

Wurth Elektronik 74279224551 is a FERRITE CHIP data line filter with 2 terminals. It operates b/w -55 to 125 °C, has a DC resistance of 0.035 ohm, and an output impedance of 550 OHM. Ideal for surface mount applications, it measures L5.59xB5.08xH1.8 mm and can handle a rated current of 4 A.

Murata Manufacturing's BLM21PG600SN1D is an 0805 chip bead filter with 2 terminals, operating b/w -55°C to 125°C. With a width of 1.25mm and length of 2mm, it offers a max DC resistance of 0.025 ohm and output impedance of 60 ohm at frequencies ranging from 100 MHz. Ideal for data line filtering applications, this surface mount component has a rated current of 3A and uses ferrite material for effective noise suppression.

FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .08 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 1.5 A;

BLM31PG601SN1K by Murata is a chip bead data line filter with 2 terminals, rated for 1.5A current and 600 ohm output impedance. It operates b/w -55°C to 125°C, suitable for applications requiring noise suppression in circuits up to 100MHz frequency range. This ferrite chip filter comes in a compact 1206 case size for surface mounting method.

DATA LINE FILTER; Maximum DC Resistance: .001 ohm; Rated Current: 20 A; Terminal Finish: Tin (Sn); JESD-609 Code: e3; Packing Method: TAPE AND REEL;

Taiyo Yuden's BK1005HS102-TV is a FERRITE CHIP filter with 2 terminals, rated at 0.3A current. With dimensions of 1mm length, 0.5mm width, and 0.5mm height, it offers an output impedance of 1000Ω. Ideal for data line filtering applications with operating temperatures ranging from -55°C to 125°C.

HI1812V101R-10 by Laird Technologies is a chip bead data line filter with 2 terminals. It operates b/w -40 to 125 °C and has a DC resistance of 0.007 ohm. With dimensions of L4.5XB3.2XH1.4 (mm), it's ideal for applications requiring filtering in the frequency range of 25-1000 MHz at an output impedance of 125 OHM.

Vishay Intertechnology's ILBB-0805ER301V is a 2-terminal data line filter with FERRITE CHIP construction. With dimensions of L2.0XB1.25XH0.9 (mm), it operates b/w -55 to 125 °C and has a max DC resistance of 0.2 ohm, suitable for surface mount applications in electronic devices requiring noise suppression up to 100 MHz frequency range.

Wurth Elektronik 7427521 is a FERRITE BEAD Data Line Filter with 4 terminals. It has a max operating temp of 85°C and min of -40°C. With dimensions L8.5xB5.6xH3.2 (mm), it's ideal for applications requiring an output impedance of 211Ω and rated current of 5A in surface mount setups.