VR10S3V3 by XP Power | Other Function Semiconductors

Image shown is a representation only.

Manufacturer	XP Power
Manufacturer's Part Number	VR10S3V3
Description	DC-DC REGULATED POWER SUPPLY MODULE; No. of Terminals: 3; Package Code: SIP; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Operating Temperature: 85 Cel;
Datasheet	VR10S3V3 Datasheet

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Line Regulation:	.4 %
Nominal Output Voltage:	3.3 V
Maximum Time At Peak Reflow Temperature (s):	10
Trim or Adjustable Output (V):	NO
Protection(s):	SHORT CIRCUIT
Width (mm):	8 mm
Maximum Seated Height:	10.9 mm
Maximum Output Current:	1 A
Maximum Total Power Output:	3.3 W
Surface Mount:	NO
No. of Outputs:	1
No. of Terminals:	3
Terminal Position:	SINGLE
Package Style (Meter):	IN-LINE
Maximum Load Regulation:	.6 %
Technology:	HYBRID
JESD-30 Code:	R-PSIP-T3
Package Shape:	RECTANGULAR
Terminal Form:	THROUGH-HOLE
Maximum Operating Temperature:	85 Cel
Package Code:	SIP
Minimum Output Voltage:	3.168 V
Minimum Input Voltage:	6 V
Warm-Up Time:	.02 Seconds
Maximum Input Voltage:	36 V
Maximum Output Voltage:	3.432 V
Approvals (V):	EN
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Package Equivalence Code:	SIP3,.2
Other IC type:	DC-DC REGULATED POWER SUPPLY MODULE
Length:	11.6 mm
Main Out Ripple Voltage:	.0265125 Vrms
Peak Reflow Temperature (C):	260
Terminal Pitch:	2.54 mm
Main Output Efficiency:	90 %

Popular Products

LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.

2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.

MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.

DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.

RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;