Rectangular Buffer Amplifiers 727

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Nominal Unity Gain Bandwidth	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Slew Rate	Sub-Category	Nominal Slow Rate	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Minimum Output Current	Nominal Bandwidth (3dB)	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
BUF07704AIPWPRG4	Texas Instruments	Buffer	Other	Gull Wing	20	HTSSOP	Rectangular	Plastic/Epoxy			20 mV	200 pA	Yes	6	Bipolar					18 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	1.6 V/us	19 V	0.026 in (0.65 mm)	85 °C (185 °F)		-25 °C (-13 °F)	Nickel PalladiumGold	Dual	R-PDSO-G20	2	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		1 MHz	e4	30 s	260 °C (500 °F)	0.256 in (6.5 mm)
BUF634AIDDAT	Texas Instruments	Buffer	Automotive	Gull Wing	8	HSOP	Rectangular	Plastic/Epoxy		-20 V	65 mV		Yes	1	Bipolar		2.3 mA	-15 V		15 V		Small Outline, Heat Sink/Slug	SOP8,.25			3750 V/us	20 V	0.05 in (1.27 mm)	125 °C (257 °F)		-40 °C (-40 °F)		Dual	R-PDSO-G8		0.067 in (1.7 mm)	0.154 in (3.9 mm)			210 MHz				0.193 in (4.9 mm)
CLC453AJE	Texas Instruments	Buffer		Gull Wing	8		Rectangular	Plastic/Epoxy		-7 V		25 uA	Yes	1	Bipolar		4 mA	-5 V		5 V				300 V/us	Buffer Amplifiers	460 V/us	7 V		85 °C (185 °F)	25 uA	-40 °C (-40 °F)		Dual	R-PDSO-G8					50 mA	70 MHz
LMH6321TS	Texas Instruments	Buffer	Automotive	Gull Wing	7	TO-263	Rectangular	Plastic/Epoxy		-18 V	52 mV	17 uA	Yes	1			20.5 mA	-15 V		15 V	±5/±15 V	Small Outline	SMSIP7H,.55,50TB		Buffer Amplifiers	2900 V/us	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	17 uA	-40 °C (-40 °F)	Tin Lead	Single	R-PSSO-G7	3	0.189 in (4.79 mm)	0.34 in (8.64 mm)	No	300 mA	110 MHz	e0	20 s	235 °C (455 °F)	0.4 in (10.16 mm)
THS7353PWG4	Texas Instruments	Buffer	Industrial	Gull Wing	20	TSSOP	Rectangular	Plastic/Epoxy				5 uA	Yes	1	CMOS					3.3 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP20,.25		Buffer Amplifiers	300 V/us	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Nickel PalladiumGold	Dual	R-PDSO-G20	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	40 mA	150 MHz	e4	30 s	260 °C (500 °F)	0.256 in (6.5 mm)
TCA4311DG4	Texas Instruments	Buffer	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy			175 mV		Yes	1						3 V		Small Outline			Buffer Amplifiers		7 V	0.05 in (1.27 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Nickel PalladiumGold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	50 mA		e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
OPA682U/2K5	Texas Instruments	Buffer	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		-6.5 V	7.5 mV		Yes	1	Bipolar		6.6 mA	-5 V		5 V	±5 V	Small Outline	SOP8,.25	570 V/us	Buffer Amplifiers	2100 V/us	6.5 V	0.05 in (1.27 mm)	85 °C (185 °F)		-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	80 mA	220 MHz				0.193 in (4.9 mm)
OPA682U	Texas Instruments	Buffer	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		-6.5 V	7.5 mV		Yes	1	Bipolar		6.6 mA	-5 V		5 V	±5 V	Small Outline	SOP8,.25	570 V/us	Buffer Amplifiers	2100 V/us	6.5 V	0.05 in (1.27 mm)	85 °C (185 °F)		-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	80 mA	220 MHz				0.193 in (4.9 mm)
BUF07703PWP	Texas Instruments	Buffer	Industrial	Gull Wing	20	HTSSOP	Rectangular	Plastic/Epoxy			15 mV		Yes	1						10 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	1 V/us	16.5 V	0.026 in (0.65 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Nickel PalladiumGold	Dual	R-PDSO-G20	2	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		800 kHz	e4	30 s	260 °C (500 °F)	0.256 in (6.5 mm)
LMC6008IM	Texas Instruments	Buffer		Gull Wing	24	SOP	Rectangular	Plastic/Epoxy			25 mV	300 nA	Yes	8			6.5 mA		Rails	14.5 V		Small Outline	SOP24,.4	1.7 V/us			16 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 nA	-40 °C (-40 °F)		Dual	R-PDSO-G24		0.104 in (2.65 mm)	0.295 in (7.5 mm)		150 mA					0.606 in (15.4 mm)
OPA2682U	Texas Instruments	Buffer	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		-6.5 V	7.5 mV		Yes	2	Bipolar		13.2 mA	-5 V		5 V	5/±5 V	Small Outline	SOP8,.25	1200 V/us	Buffer Amplifiers	2100 V/us	6.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	55 uA	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	80 mA	330 MHz				0.193 in (4.9 mm)
BUF11702PWP	Texas Instruments	Buffer	Commercial	Gull Wing	28	HTSSOP	Rectangular	Plastic/Epoxy			15 mV	200 pA	Yes	1			5.5 mA		Tube	10 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	1 V/us	16.5 V	0.026 in (0.65 mm)	70 °C (158 °F)		0 °C (32 °F)	Nickel PalladiumGold	Dual	R-PDSO-G28	2	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		1 MHz	e4	30 s	260 °C (500 °F)	0.382 in (9.7 mm)
BUF05703PWG4	Texas Instruments	Buffer	Other	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy					Yes	1								Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25		Buffer Amplifiers			0.026 in (0.65 mm)				Nickel PalladiumGold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No			e4			0.197 in (5 mm)
BUF04701AIPW	Texas Instruments	Buffer	Automotive	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		-6.6 V	7 mV	10 pA	Yes	4	CMOS			-6 V		6 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25		Buffer Amplifiers	10 V/us	6.6 V	0.026 in (0.65 mm)	125 °C (257 °F)		-40 °C (-40 °F)	Nickel PalladiumGold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		8 MHz	e4			0.197 in (5 mm)
BUF05703PW	Texas Instruments	Buffer	Industrial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy			15 mV		Yes	1						10 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25		Buffer Amplifiers	1 V/us	16.5 V	0.026 in (0.65 mm)	85 °C (185 °F)		-40 °C (-40 °F)		Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		800 kHz				0.197 in (5 mm)
BUF06704AIPWPR	Texas Instruments	Buffer	Other	Gull Wing	16	HTSSOP	Rectangular	Plastic/Epoxy			20 mV	200 pA	Yes	6	Bipolar					18 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	1.6 V/us	19 V	0.026 in (0.65 mm)	85 °C (185 °F)		-25 °C (-13 °F)		Dual	R-PDSO-G16		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		1 MHz				0.197 in (5 mm)
BUF05703PWRG4	Texas Instruments	Buffer	Other	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy					Yes	1								Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25		Buffer Amplifiers			0.026 in (0.65 mm)				Nickel PalladiumGold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No			e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
LMH6559MA/NOPB	Texas Instruments	Buffer	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	1750 MHz	-6.5 V	25 mV	14 uA	Yes	1	Bipolar		14 mA	-5 V		5 V		Small Outline	SOP8,.25		Buffer Amplifiers	4580 V/us	6.5 V	0.05 in (1.27 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.753 mm)	0.154 in (3.899 mm)	No	50 A	1050 MHz	e3		260 °C (500 °F)	0.193 in (4.902 mm)
TL32088INS	Texas Instruments	Buffer	Commercial	Gull Wing	20	SOP	Rectangular	Plastic/Epoxy					Yes	1	Bipolar		18 mA			5 V	5 V	Small Outline	SOP20,.3		Buffer Amplifiers	3 V/us	7 V	0.05 in (1.27 mm)	70 °C (158 °F)		-20 °C (-4 °F)		Dual	R-PDSO-G20		0.079 in (2 mm)	0.209 in (5.3 mm)	No						0.496 in (12.6 mm)
BUF11704AIPWPG4	Texas Instruments	Buffer	Other	Gull Wing	28	HTSSOP	Rectangular	Plastic/Epoxy			20 mV	200 pA	Yes	10	Bipolar					18 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	1.6 V/us	19 V	0.026 in (0.65 mm)	85 °C (185 °F)		-25 °C (-13 °F)	Nickel PalladiumGold	Dual	R-PDSO-G28	2	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		1 MHz	e4	30 s	260 °C (500 °F)	0.382 in (9.7 mm)
OPA682N-250	Texas Instruments	Buffer	Industrial	Gull Wing	6	LSSOP	Rectangular	Plastic/Epoxy		-6.5 V	7.5 mV		Yes	1	Bipolar		6.6 mA	-5 V		5 V	±5 V	Small Outline, Low Profile, Shrink Pitch	TSOP6,.11,37	570 V/us	Buffer Amplifiers	2100 V/us	6.5 V	0.037 in (0.95 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G6		0.057 in (1.45 mm)	0.063 in (1.6 mm)	No	80 mA	220 MHz	e0			0.114 in (2.9 mm)
LMH6560MAX	Texas Instruments	Buffer		Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		-6.5 V	25 mV	14 uA	Yes	4			63 mA	-5 V	Tape And Reel	5 V		Small Outline	SOP14,.25			3100 V/us	6.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	10 uA	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.069 in (1.753 mm)	0.154 in (3.899 mm)		40 mA					0.34 in (8.6235 mm)
LM6321N	Texas Instruments	Buffer	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy		-18 V	100 mV	7 uA	No	1				-15 V		15 V		In-Line			Buffer Amplifiers	800 V/us	18 V	0.1 in (2.54 mm)	70 °C (158 °F)		0 °C (32 °F)		Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)			50 MHz				0.386 in (9.817 mm)
BUF11705PWP	Texas Instruments	Buffer	Commercial Extended	Gull Wing	28	HTSSOP	Rectangular	Plastic/Epoxy			30 mV	200 pA	Yes	10						18 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	4.6 V/us	24 V	0.026 in (0.65 mm)	85 °C (185 °F)		-25 °C (-13 °F)		Dual	R-PDSO-G28		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		1 MHz				0.382 in (9.7 mm)
TL32088NS	Texas Instruments	Buffer	Commercial	Gull Wing	20	SOP	Rectangular	Plastic/Epoxy					Yes	2	Bipolar					5 V		Small Outline				3 V/us		0.05 in (1.27 mm)	70 °C (158 °F)		0 °C (32 °F)		Dual	R-PDSO-G20		0.077 in (1.95 mm)	0.209 in (5.3 mm)	No						0.496 in (12.6 mm)
LMH6718MA	Texas Instruments	Buffer		Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		-6.75 V	15 mV	20 uA	Yes	2			6.2 mA	-5 V	Rails	5 V		Small Outline	SOP8,.25	250 V/us	Buffer Amplifiers	400 V/us	6.75 V	0.05 in (1.27 mm)	85 °C (185 °F)	15 uA	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.753 mm)	0.154 in (3.899 mm)			130 MHz				0.193 in (4.902 mm)
LM6325N	Texas Instruments	Buffer	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy		-18 V	100 mV	7 uA	No	1								In-Line			Buffer Amplifiers	50 V/us	18 V	0.1 in (2.54 mm)	70 °C (158 °F)		0 °C (32 °F)		Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)			50 MHz				0.755 in (19.18 mm)
BUF07702PWPG4	Texas Instruments	Buffer	Other	Gull Wing	20	HTSSOP	Rectangular	Plastic/Epoxy			15 mV	200 pA	Yes	1						10 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	1 V/us	16.5 V	0.026 in (0.65 mm)	85 °C (185 °F)		0 °C (32 °F)		Dual	R-PDSO-G20		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		1 MHz				0.256 in (6.5 mm)
TCA4311DRG4	Texas Instruments	Buffer	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy			175 mV		Yes	1						3 V		Small Outline			Buffer Amplifiers		7 V	0.05 in (1.27 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Nickel PalladiumGold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	50 mA		e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
BUF634U-TR	Texas Instruments	Buffer	Automotive	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		-18 V	100 mV	20 uA	Yes	1	Bipolar			-15 V		15 V		Small Outline				2000 V/us	18 V	0.05 in (1.27 mm)	125 °C (257 °F)		-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		180 MHz				0.193 in (4.9 mm)
TL32088CNSR	Texas Instruments	Buffer	Commercial	Gull Wing	20	SOP	Rectangular	Plastic/Epoxy			7.5 mV	250 nA	Yes	2	Bipolar		25 mA			5 V	5 V	Small Outline	SOP20,.3		Buffer Amplifiers	3 V/us	7 V	0.05 in (1.27 mm)	70 °C (158 °F)		0 °C (32 °F)		Dual	R-PDSO-G20		0.079 in (2 mm)	0.209 in (5.3 mm)	No		7 MHz				0.496 in (12.6 mm)
BUF06703PWR	Texas Instruments	Buffer	Industrial	Gull Wing	16	TSSOP	Rectangular	Plastic/Epoxy			15 mV		Yes	1			3 mA		Tape And Reel	10 V		Small Outline, Thin Profile, Shrink Pitch			Buffer Amplifiers	1 V/us	16.5 V	0.026 in (0.65 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Nickel PalladiumGold	Dual	R-PDSO-G16	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		800 kHz	e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
THS7353PWR	Texas Instruments	Buffer	Industrial	Gull Wing	20	TSSOP	Rectangular	Plastic/Epoxy				5 uA	Yes	1	CMOS				Tape And Reel	3.3 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP20,.25		Buffer Amplifiers	300 V/us	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Nickel PalladiumGold	Dual	R-PDSO-G20	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	40 mA	150 MHz	e4	30 s	260 °C (500 °F)	0.256 in (6.5 mm)
CLC110AJE	Texas Instruments	Buffer	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		-7 V	8 mV	50 uA	Yes	1	Bipolar		20 mA	-5 V		5 V	±5 V	Small Outline	SOP8,.25	500 V/us	Buffer Amplifiers	800 V/us	7 V	0.05 in (1.27 mm)	85 °C (185 °F)	50 uA	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	50 mA	90 MHz	e0			0.193 in (4.9 mm)
THS7353PW	Texas Instruments	Buffer	Industrial	Gull Wing	20	TSSOP	Rectangular	Plastic/Epoxy				5 uA	Yes	1	CMOS				Tube	3.3 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP20,.25		Buffer Amplifiers	300 V/us	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Nickel PalladiumGold	Dual	R-PDSO-G20	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	40 mA	150 MHz	e4	30 s	260 °C (500 °F)	0.256 in (6.5 mm)
CLC115AJP	Texas Instruments	Buffer	Industrial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy		-7 V		20 uA	No	4			61 mA	-5 V		5 V		In-Line	DIP14,.3	2200 V/us	Buffer Amplifiers	2700 V/us	7 V	0.1 in (2.54 mm)	85 °C (185 °F)	20 uA	-40 °C (-40 °F)		Dual	R-PDIP-T14			0.3 in (7.62 mm)		48 A	700 MHz				0.72 in (18.288 mm)
THS7353PWRG4	Texas Instruments	Buffer	Industrial	Gull Wing	20	TSSOP	Rectangular	Plastic/Epoxy				5 uA	Yes	1	CMOS				Tape And Reel	3.3 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP20,.25		Buffer Amplifiers	300 V/us	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Nickel PalladiumGold	Dual	R-PDSO-G20	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	40 mA	150 MHz	e4	30 s	260 °C (500 °F)	0.256 in (6.5 mm)
BUF600AP	Texas Instruments	Buffer	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy		-6 V	30 mV	5 uA	No	1	Bipolar			-5 V		5 V		In-Line			Buffer Amplifiers	3400 V/us	6 V	0.1 in (2.54 mm)	85 °C (185 °F)		-40 °C (-40 °F)		Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No		320 MHz				0.378 in (9.59 mm)
LM6121J/883	Texas Instruments	Buffer		Through-Hole	8	DIP	Rectangular	Ceramic, Glass-Sealed		-18 V	50 mV	7 uA	No	1		MIL-STD-883		-15 V		15 V		In-Line			Buffer Amplifiers	800 V/us	18 V	0.1 in (2.54 mm)					Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)			50 MHz				0.4 in (10.16 mm)
CLC5612IMX	Texas Instruments	Buffer		Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		-7 V		17 uA	Yes	2	Bipolar		4 mA	-5 V		5 V		Small Outline	SOP8,.25	200 V/us	Buffer Amplifiers	290 V/us	7 V	0.05 in (1.27 mm)	85 °C (185 °F)	17 uA	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.753 mm)	0.154 in (3.899 mm)		50 mA	49 MHz				0.193 in (4.902 mm)
BUF11705AIPWPR	Texas Instruments	Buffer	Other	Gull Wing	28	HTSSOP	Rectangular	Plastic/Epoxy			20 mV		Yes	10	Bipolar		9 mA		Tape And Reel	18 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	1.6 V/us	24 V	0.026 in (0.65 mm)	85 °C (185 °F)		-25 °C (-13 °F)	Nickel PalladiumGold	Dual	R-PDSO-G28	2	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		1 MHz	e4	30 s	260 °C (500 °F)	0.382 in (9.7 mm)
LM310P1	Texas Instruments	Buffer	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy					No	1				-15 V		15 V	±15 V	In-Line	DIP8,.3		Buffer Amplifiers			0.1 in (2.54 mm)	70 °C (158 °F)		0 °C (32 °F)		Dual	R-PDIP-T8				No
LM310PP1	Texas Instruments	Buffer	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy					No	1				-15 V		15 V	±15 V	In-Line	DIP8,.3		Buffer Amplifiers			0.1 in (2.54 mm)	70 °C (158 °F)		0 °C (32 °F)		Dual	R-PDIP-T8				No
BUF11704AIPWPRG4	Texas Instruments	Buffer	Other	Gull Wing	28	HTSSOP	Rectangular	Plastic/Epoxy			20 mV	200 pA	Yes	10	Bipolar					18 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	1.6 V/us	19 V	0.026 in (0.65 mm)	85 °C (185 °F)		-25 °C (-13 °F)	Nickel PalladiumGold	Dual	R-PDSO-G28	2	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		1 MHz	e4	30 s	260 °C (500 °F)	0.382 in (9.7 mm)
BUF06704AIPWP	Texas Instruments	Buffer	Other	Gull Wing	16	HTSSOP	Rectangular	Plastic/Epoxy			20 mV	200 pA	Yes	6	Bipolar					18 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	1.6 V/us	19 V	0.026 in (0.65 mm)	85 °C (185 °F)		-25 °C (-13 °F)	Nickel PalladiumGold	Dual	R-PDSO-G16	2	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		1 MHz	e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
LMH6559MFX	Texas Instruments	Buffer	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		-6.5 V	25 mV	14 uA	Yes	1				-5 V		5 V		Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37		Buffer Amplifiers	4580 V/us	6.5 V	0.037 in (0.95 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5	1	0.048 in (1.22 mm)	0.063 in (1.6 mm)	No	50 mA	1050 MHz	e0		260 °C (500 °F)	0.115 in (2.92 mm)
BUF601AU	Texas Instruments	Buffer	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		-6 V	30 mV	10 uA	Yes	1	Bipolar			-5 V		5 V		Small Outline			Buffer Amplifiers	3600 V/us	6 V	0.05 in (1.27 mm)	85 °C (185 °F)		-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		320 MHz				0.193 in (4.9 mm)
CLC109AJM5	Texas Instruments	Buffer	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		-7 V	8.2 mV	8 uA	Yes	1	Bipolar		4 mA	-5 V		5 V	±5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	220 V/us	Buffer Amplifiers	350 V/us	7 V	0.037 in (0.95 mm)	85 °C (185 °F)	4 uA	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5		0.056 in (1.42 mm)	0.065 in (1.65 mm)	No	40 mA	270 MHz	e0			0.115 in (2.92 mm)

Buffer Amplifiers

Buffer amplifiers are electronic circuits that are designed to provide a high input impedance and a low output impedance. They are used to isolate one part of a circuit from another, preventing changes in one part of the circuit from affecting the other.

The primary function of a buffer amplifier is to prevent loading effects, which occur when a device with a low input impedance is connected to a device with a high output impedance. In this scenario, the high output impedance of the first device may cause a decrease in signal strength or distortion in the second device.

By using a buffer amplifier, the high output impedance of the first device is isolated from the second device, ensuring that the signal is transferred with minimal distortion. The buffer amplifier acts as a bridge between the two devices, allowing them to operate independently.

Buffer amplifiers are commonly used in audio applications, such as preamplifiers, where they can be used to isolate a sensitive input signal from a power amplifier that requires a low impedance input. They are also used in other applications, such as instrumentation, signal conditioning, and data acquisition, where signal integrity is critical.