14 Comparators 1,628

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
TLC339CNSRG4	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	Yes	4	CMOS		100 μA			5 V	5 V	Small Outline	SOP14,.3	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)		2.5 µs	Open-Drain	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.079 in (2 mm)	0.209 in (5.3 mm)	No	e4	30 s	260 °C (500 °F)	0.402 in (10.2 mm)
LM339Y	Texas Instruments	Comparator	Commercial	No Lead	14	DIE					9 mV	-400 nA	Yes	4	BIPOLAR					5 V		Uncased Chip		Comparators	36 V		70 °C (158 °F)		1.3 µs	Open-Collector	0 °C (32 °F)		Upper	X-XUUC-N				No
LMV339PWRLR	Texas Instruments	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		7 mV	400 nA	Yes	4						2.7 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)		400 ns		-40 °C (-40 °F)		Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No				0.197 in (5 mm)
5962-8687801CA	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic, Glass-Sealed	-7 V	2 mV	15 uA	No	2		MIL-STD-883		-6 V		12 V		In-Line		Comparators	14 V		125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-GDIP-T14				No
LM339DBLE	Texas Instruments	Comparator	Commercial	Gull Wing	14	SSOP	Rectangular		Plastic/Epoxy		9 mV	-400 nA	Yes	4	BIPOLAR		2 mA			5 V	5 V	Small Outline, Shrink Pitch	SSOP14,.3	Comparators	36 V	0.026 in (0.65 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)		Dual	R-PDSO-G14		0.079 in (2 mm)	0.209 in (5.3 mm)	No				0.244 in (6.2 mm)
TLC3704MDRG4	Texas Instruments	Comparator	Military	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy	-18 V	10 mV	30 nA	Yes	4	CMOS		175 μA			5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)		2.7 µs	Push-Pull	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
LM339N3	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		9 mV		No		BIPOLAR		2 mA			5 V	5 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)		1.3 µs		0 °C (32 °F)		Dual	R-PDIP-T14
TLV3404CDR	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy	0 V	4.4 mV	1.5 nA	Yes	4			2.56 μA	0 V	Tape And Reel	2.7 V	±1.25/±8/2.5/16 V	Small Outline	SOP14,.25	Comparators	17 V	0.05 in (1.27 mm)	70 °C (158 °F)	100 pA	175 µs	Open-Drain	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.341 in (8.65 mm)
TLC354CPWRG4	Texas Instruments	Comparator	Commercial	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	Yes	4	CMOS		600 μA		Tape And Reel	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)	20 nA	650 ns	Open-Drain	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4		260 °C (500 °F)	0.197 in (5 mm)
5962R9679801VCX	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic, Glass-Sealed	-18 V	4 mV	500 nA	No	2	BIPOLAR	MIL-STD-883	11.5 mA	-15 V		15 V		In-Line		Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)		80 ns	Open-Collector	-55 °C (-67 °F)		Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	Yes				0.765 in (19.43 mm)
V62/04743-01	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		7 mV	250 nA	Yes	4	BIPOLAR					5 V		Small Outline		Comparators	36 V	0.05 in (1.27 mm)	85 °C (185 °F)		1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.91 mm)					0.34 in (8.64 mm)
LP239J	Texas Instruments	Comparator	Other	Through-Hole	14	DIP	Rectangular		Ceramic, Glass-Sealed		9 mV	-40 nA	No	4	BIPOLAR		100 μA			5 V	5 V	In-Line	DIP14,.3	Comparators	36 V	0.1 in (2.54 mm)	85 °C (185 °F)	25 nA	1.3 µs	Open-Collector	-25 °C (-13 °F)		Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.77 in (19.56 mm)
TL710CN	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy				No		BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T14				No
TL820CN3	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy				No		BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T14
LMV339PWR	Texas Instruments	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		7 mV	400 nA	Yes	4	CMOS		350 μA			2.7 V	2.7/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	250 nA	400 ns		-40 °C (-40 °F)		Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No				0.197 in (5 mm)
LM239PW	Texas Instruments	Comparator	Other	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		5 mV	400 nA	Yes	4	BIPOLAR		2 mA		Tube	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	36 V	0.026 in (0.65 mm)	85 °C (185 °F)	250 nA	1.3 µs	Open-Collector	-25 °C (-13 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
5962-8773901CX	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic, Glass-Sealed	0 V	4 mV	-300 nA	No	4	BIPOLAR	MIL-STD-883	3 mA	0 V		5 V		In-Line		Comparators	36 V	0.1 in (2.54 mm)	125 °C (257 °F)		1.3 µs	Open-Collector	-55 °C (-67 °F)	Tin Lead	Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	Yes	e0			0.77 in (19.56 mm)
LM319JP4	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Ceramic		10 mV		No		BIPOLAR			-15 V		15 V	±15 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T14
TLV3704CDG4	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy	0 V	7 mV	1.5 nA	Yes	4	CMOS		1 μA	0 V		2.7 V	±1.25/±8/2.5/16 V	Small Outline	SOP14,.25	Comparators	17 V	0.05 in (1.27 mm)	70 °C (158 °F)	250 pA	240 µs	Push-Pull	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
TLC139MD	Texas Instruments	Comparator	Military	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		10 mV	30 nA	Yes	4	CMOS		175 μA			5 V		Small Outline			18 V	0.05 in (1.27 mm)	125 °C (257 °F)		2.5 µs	Open-Drain	-55 °C (-67 °F)		Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.341 in (8.65 mm)
TLC354IDG4	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		7 mV	2 nA	Yes	4	CMOS		400 μA			5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	2 nA	650 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
M38510/11201SCX	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic, Metal-Sealed Cofired	-18 V	7 mV	1 nA	No	4						15 V		In-Line		Comparators	18 V		125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-CDIP-T14				No
LM139AWG-SMD	Texas Instruments	Comparator	Military	Gull Wing	14	SOP	Rectangular		Ceramic, Glass-Sealed	0 V	2 mV	-1 nA	Yes	4	BIPOLAR	MIL-STD-883	2 mA	0 V		5 V	5 V	Small Outline	SOP14,.4	Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	100 nA	5 µs	Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin Lead	Dual	R-GDSO-G14	1	0.092 in (2.33 mm)	0.25 in (6.35 mm)	No	e0			0.39 in (9.906 mm)
LM339PWG4	Texas Instruments	Comparator	Commercial	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		5 mV	400 nA	Yes	4	BIPOLAR		2 mA		Tube	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	36 V	0.026 in (0.65 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
SN72820N	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy				No		BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T14				No
LM139AWGRLQMLV	Texas Instruments	Comparator	Military	Gull Wing	14	SOP	Rectangular	100k Rad(Si)	Ceramic, Glass-Sealed	0 V	2 mV	-1 nA	Yes	4	BIPOLAR	MIL-PRF-38535 Class V	2 mA	0 V		5 V	5 V	Small Outline	SOP14,.4	Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	100 nA	700 ns	Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin Lead	Dual	R-GDSO-G14	1	0.092 in (2.33 mm)	0.25 in (6.35 mm)	No	e0			0.39 in (9.906 mm)
LP339N/PB	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		9 mV	40 nA	No	4	BIPOLAR					5 V		In-Line		Comparators	36 V	0.1 in (2.54 mm)	70 °C (158 °F)		8 µs	Open-Drain	0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T14	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)		e0			0.755 in (19.18 mm)
LP339NE4	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		9 mV	40 nA	No	4	BIPOLAR		100 μA			5 V	5 V	In-Line	DIP14,.3	Comparators	36 V	0.1 in (2.54 mm)	70 °C (158 °F)	25 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e4			0.76 in (19.305 mm)
LP2901IDRQ1	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		5 mV	-40 nA	Yes	4	BIPOLAR	AEC-Q100	100 μA		Tape And Reel	5 V	5 V	Small Outline	SOP14,.25	Comparators	36 V	0.05 in (1.27 mm)	85 °C (185 °F)	25 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
TL432CJ	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Ceramic				No		BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T14				No
5962-9471102NXD	Texas Instruments	Comparator	Industrial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		4 mV	100 nA	No	4		MIL-STD-883				15 V		In-Line		Comparators	36 V	0.1 in (2.54 mm)	85 °C (185 °F)				-40 °C (-40 °F)		Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)					0.785 in (19.94 mm)
TLV7034PWR	Texas Instruments	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		8 mV	2 pA	Yes	4			3 μA		Tape And Reel	1.8 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	7 V	0.026 in (0.65 mm)	125 °C (257 °F)	2 pA	3 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)		e4		260 °C (500 °F)	0.197 in (5 mm)
TLC354CD	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		5 mV	600 pA	Yes	4	CMOS		600 μA		Tube	5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)	20 nA	650 ns	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
LM3302DE4	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		40 mV	-1 uA	Yes	4	BIPOLAR					5 V	5 V	Small Outline	SOP14,.25	Comparators	28 V	0.05 in (1.27 mm)	85 °C (185 °F)		1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
LMV339MTX	Texas Instruments	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		7 mV	250 nA	Yes	4	BICMOS		300 μA	0 V	Tape And Reel	2.7 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	250 nA	450 ns	Open-Collector	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e0	40	260 °C (500 °F)	0.197 in (5 mm)
5962-01-358-3483	Texas Instruments	Comparator	Other	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		9 mV		No		BIPOLAR		2 mA			5 V	5 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	85 °C (185 °F)		1.3 µs		-25 °C (-13 °F)		Dual	R-PDIP-T14				No
LM106J	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic				No		BIPOLAR						12,-3/-12 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T14				No
LMV339QDRQ1	Texas Instruments	Comparator	Automotive	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		9 mV	400 nA	Yes	2	BIPOLAR	AEC-Q100	350 μA			5 V	3/5 V	Small Outline	SOP14,.25	Comparators	6 V	0.05 in (1.27 mm)	125 °C (257 °F)	250 nA	450 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.341 in (8.65 mm)
TLV3404QDR	Texas Instruments	Comparator	Automotive	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy	0 V	4.4 mV	1.5 nA	Yes	1				0 V		2.7 V		Small Outline		Comparators	17 V	0.05 in (1.27 mm)	125 °C (257 °F)			Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.341 in (8.65 mm)
TLC339MDRG4	Texas Instruments	Comparator	Military	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		10 mV	30 nA	Yes	4	CMOS		80 μA		Tape And Reel	5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	2 pA	2.5 µs	Open-Collector	-55 °C (-67 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.341 in (8.65 mm)
LP2901N	Texas Instruments	Comparator	Industrial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		9 mV	40 nA	No	4	BIPOLAR		100 μA		Tube	5 V	5 V	In-Line	DIP14,.3	Comparators	36 V	0.1 in (2.54 mm)	85 °C (185 °F)	25 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e4			0.76 in (19.305 mm)
5962-01-107-5776	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		9 mV		No		BIPOLAR		2 mA			5 V	5 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)		1.3 µs		0 °C (32 °F)		Dual	R-PDIP-T14				No
LM139AW	Texas Instruments	Comparator	Military	Flat	14	DFP	Rectangular		Ceramic, Glass-Sealed		2 mV	25 nA	Yes	4	BIPOLAR		2 mA		Tube	5 V	5 V	Flatpack	FL14,.3	Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	25 nA	1.3 µs	Open-Collector	-55 °C (-67 °F)	Tin Lead	Dual	R-GDFP-F14		0.08 in (2.03 mm)	0.235 in (5.97 mm)	No	e0			0.363 in (9.21 mm)
LM339ADP3	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		4 mV		Yes		BIPOLAR		2 mA			5 V	5 V	Small Outline	SOP14,.25	Comparators		0.05 in (1.27 mm)	70 °C (158 °F)		1.3 µs		0 °C (32 °F)		Dual	R-PDSO-G14
LM339W	Texas Instruments	Comparator	Commercial	Flat	14	DFP	Rectangular		Ceramic		9 mV		Yes	4	BIPOLAR		2 mA			5 V	5 V	Flatpack	FL14,.3	Comparators		0.05 in (1.27 mm)	70 °C (158 °F)		1.3 µs		0 °C (32 °F)		Dual	R-XDFP-F14				No
TLV1704AMPWPSEP	Texas Instruments	Comparator	Military	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		2.5 mV	20 nA	Yes	4	BIPOLAR							Small Outline, Thin Profile, Shrink Pitch		Comparators	40 V	0.026 in (0.65 mm)	125 °C (257 °F)	15 nA	560 ns	Open-Collector	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	2	0.047 in (1.2 mm)	0.173 in (4.4 mm)		e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
LM119J/NOPB	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic, Glass-Sealed	-18 V	7 mV	1 uA	No	2	BIPOLAR			-15 V		15 V		In-Line		Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)		80 ns	Open-Collector	-55 °C (-67 °F)		Dual	R-GDIP-T14	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.76 in (19.304 mm)
LM339AN3	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		4 mV		No		BIPOLAR		2 mA			5 V	5 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)		1.3 µs		0 °C (32 °F)		Dual	R-PDIP-T14

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.