14 Comparators 1,628

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Nominal Bandwidth (3dB)	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
TLC339QDR	Texas Instruments	Comparator	Automotive	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		10 mV	30 nA	Yes	4	CMOS		125 μA			5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)		2.5 µs	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No					0.341 in (8.65 mm)
LM339D3	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		9 mV		Yes		BIPOLAR		2 mA			5 V	5 V	Small Outline	SOP14,.25	Comparators		0.05 in (1.27 mm)	70 °C (158 °F)		1.3 µs		0 °C (32 °F)		Dual	R-PDSO-G14
TLV3404CPWR	Texas Instruments	Comparator	Commercial	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy	0 V	4.4 mV	1.5 nA	Yes	4			2.56 μA	0 V	Tape And Reel	2.7 V	±1.25/±8/2.5/16 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	17 V	0.026 in (0.65 mm)	70 °C (158 °F)	100 pA	175 µs	Open-Drain	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		e4		260 °C (500 °F)	0.197 in (5 mm)
TLC3704CNSRG4	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy	-18 V	6.5 mV	600 pA	Yes	4	CMOS		100 μA			5 V	5 V	Small Outline	SOP14,.3	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)		2.7 µs	Push-Pull	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.079 in (2 mm)	0.209 in (5.3 mm)	No		e4	30 s	260 °C (500 °F)	0.402 in (10.2 mm)
SN72711J	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Ceramic				No	2	BIPOLAR						12,-6 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T14				No
LM319N-N	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		10 mV		No	2	BIPOLAR		12.5 mA	-15 V		15 V	±15 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)	1 uA	80 ns		0 °C (32 °F)		Dual	R-PDIP-T14				No
TLC374QD	Texas Instruments	Comparator	Automotive	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		5 mV	20 nA	Yes	4	CMOS		800 μA			5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	20 nA	650 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No					0.341 in (8.65 mm)
5962R9673802VDX	Texas Instruments	Comparator	Military	Flat	14	DFP	Rectangular	100k Rad(Si)	Ceramic, Glass-Sealed	0 V	4 mV	-1 nA	Yes	4	BIPOLAR	MIL-PRF-38535 Class V		0 V		5 V		Flatpack		Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)			Open-Collector	-55 °C (-67 °F)	Tin Lead	Dual	R-GDFP-F14		0.08 in (2.02 mm)	0.25 in (6.35 mm)	Yes		e0
LM139W	Texas Instruments	Comparator	Military	Flat	14	DFP	Rectangular		Ceramic, Glass-Sealed		9 mV	-300 nA	Yes	4	BIPOLAR		2 mA		Tube	5 V	5 V	Flatpack	FL14,.3	Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	100 nA	1.3 µs	Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin Lead	Dual	R-GDFP-F14		0.08 in (2.03 mm)	0.247 in (6.285 mm)	No		e0			0.363 in (9.21 mm)
TL432CN	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy				No		BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T14				No
5962-9555001NXDR	Texas Instruments	Comparator	Military	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		10 mV	30 nA	Yes	4	CMOS	MIL-STD-883	80 μA			5 V		Small Outline		Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	30 pA	2.5 µs	Open-Collector, Open-Drain	-55 °C (-67 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4		260 °C (500 °F)	0.341 in (8.65 mm)
5962-9096901MCA	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic, Glass-Sealed	-18 V	10 mV	30 nA	No	4	CMOS	MIL-STD-883	80 μA		Tube	5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	30 pA	2.7 µs	Push-Pull	-55 °C (-67 °F)	Tin/Lead	Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	Yes		e0			0.77 in (19.56 mm)
TLV7044QPWRQ1	Texas Instruments	Comparator		Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		8 mV		Yes	4		AEC-Q100	3 μA		Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25		7 V	0.026 in (0.65 mm)	125 °C (257 °F)	2 pA	3 µs	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)			e4		260 °C (500 °F)	0.197 in (5 mm)
TLC339CN	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	No	4	CMOS		80 μA		Tube	5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)	2 pA	2.5 µs	Open-Collector	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No		e4			0.76 in (19.305 mm)
V62/03672-02XE	Texas Instruments	Comparator	Military	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy	0 V	2.5 mV	-400 nA	Yes	4	BIPOLAR		2 mA	0 V	Tape And Reel	5 V	5 V	Small Outline	SOP14,.25	Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	50 nA	1.3 µs	Open-Collector, Open-Drain	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
LMV339IDG4	Texas Instruments	Comparator	Automotive	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		9 mV	400 nA	Yes	4	BIPOLAR		350 μA			5 V	3/5 V	Small Outline	SOP14,.25	Comparators	5.5 V	0.05 in (1.27 mm)	125 °C (257 °F)	250 nA	600 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
LM339AJ4	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Ceramic		4 mV		No	4	BIPOLAR		2 mA			5 V	5 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)		1.3 µs		0 °C (32 °F)		Dual	R-XDIP-T14
5962-8773901CA	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic, Glass-Sealed		2 mV	25 nA	No	4	BIPOLAR	MIL-STD-883	2 mA		Tube	5 V	5/30 V	In-Line	DIP14,.3	Comparators	36 V	0.1 in (2.54 mm)	125 °C (257 °F)	25 nA	1.3 µs	Open-Collector	-55 °C (-67 °F)	Tin Lead	Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.263 in (6.67 mm)	Yes		e0			0.77 in (19.56 mm)
LM139AN	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		4 mV	-300 nA	No	4	BIPOLAR		2 mA			5 V	5 V	In-Line	DIP14,.3	Comparators	36 V	0.1 in (2.54 mm)	125 °C (257 °F)		1.3 µs	Open-Collector	-55 °C (-67 °F)		Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No					0.76 in (19.305 mm)
TLC374CJ4	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Ceramic		6.5 mV		No		CMOS		800 μA			5 V	5 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)	600 pA	650 ns		0 °C (32 °F)		Dual	R-XDIP-T14
INA204AIPWT	Texas Instruments	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		3.5 mV		Yes	2			2.8 mA			12 V	12 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators		0.026 in (0.65 mm)	125 °C (257 °F)	16 uA	1.3 µs		-40 °C (-40 °F)		Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	4.4 MHz				0.197 in (5 mm)
5962-01-289-9696	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic				No		BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T14				No
TLC3704CNE4	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy	-18 V	6.5 mV	600 pA	No	4	CMOS		100 μA			5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)	600 pA	2.7 µs	Push-Pull	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No		e4			0.76 in (19.305 mm)
LM3302N	Texas Instruments	Comparator	Industrial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		40 mV	-1 uA	No	4	BIPOLAR		2 mA		Tube	5 V	5 V	In-Line	DIP14,.3	Comparators	28 V	0.1 in (2.54 mm)	85 °C (185 °F)	500 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No		e4			0.76 in (19.305 mm)
TLC339CDR	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	Yes	4	CMOS		80 μA		Tape And Reel	5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)	2 pA	2.5 µs	Open-Collector	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4		260 °C (500 °F)	0.341 in (8.65 mm)
TLC3704CJ	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Ceramic, Glass-Sealed		6.5 mV	600 pA	No	4	CMOS		100 μA			5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)		1.1 µs	Totem Pole	0 °C (32 °F)		Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No					0.77 in (19.56 mm)
TLV3494AIPWT	Texas Instruments	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		15 mV	10 pA	Yes	4	CMOS		4.8 μA		Tape And Reel	5 V	2/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	5.5 V	0.026 in (0.65 mm)	125 °C (257 °F)	10 pA	12 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	2	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		e4		260 °C (500 °F)	0.197 in (5 mm)
TLC339INE4	Texas Instruments	Comparator	Industrial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		7 mV	2 nA	No	4	CMOS		125 μA			5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	85 °C (185 °F)	2 nA	2.5 µs	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No		e4			0.76 in (19.305 mm)
TLC339IDG4	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		7 mV	2 nA	Yes	4	CMOS		125 μA			5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)		2.5 µs	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
UA711CNP3	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy				No	2	BIPOLAR						12,-6 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T14
TLV3704CDR	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy	0 V	7 mV	1.5 nA	Yes	4	CMOS		4 μA	0 V		2.7 V	±1.25/±8/2.5/16 V	Small Outline	SOP14,.25	Comparators	17 V	0.05 in (1.27 mm)	70 °C (158 °F)	250 pA	240 µs	Push-Pull	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4			0.341 in (8.65 mm)
5962-3811201BCX	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic, Metal-Sealed Cofired	-18 V	7 mV	1 nA	No	4				0 V		15 V		In-Line		Comparators	18 V		125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-CDIP-T14				No
LM339ANSE4	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy	0 V	4 mV	-400 nA	Yes	4	BIPOLAR			0 V		5 V		Small Outline		Comparators	36 V	0.05 in (1.27 mm)	70 °C (158 °F)		1.3 µs	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.079 in (2 mm)	0.209 in (5.3 mm)	No		e4	30 s	260 °C (500 °F)	0.402 in (10.2 mm)
TLC374IDG4	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		7 mV	2 nA	Yes	4	CMOS		800 μA			5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	2 nA	650 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
LM139AWB	Texas Instruments	Comparator	Military	Flat	14	DFP	Rectangular		Ceramic, Glass-Sealed		2 mV	25 nA	Yes	4	BIPOLAR	MIL-STD-883	2 mA		Tube	5 V	5 V	Flatpack	FL14,.3	Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	25 nA	1.3 µs	Open-Collector	-55 °C (-67 °F)	Tin Lead	Dual	R-GDFP-F14		0.08 in (2.03 mm)	0.235 in (5.97 mm)	No		e0			0.363 in (9.21 mm)
MLM339P	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		5 mV	250 nA	No	4	BIPOLAR		2.5 mA			5 V	5 V	In-Line	DIP14,.3	Comparators	36 V	0.1 in (2.54 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T14	1	0.21 in (5.334 mm)	0.3 in (7.62 mm)	No		e0			0.75 in (19.05 mm)
TLC3704CPWG4	Texas Instruments	Comparator	Commercial	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy	-18 V	6.5 mV	600 pA	Yes	4	CMOS		100 μA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)		2.7 µs	Push-Pull	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
UA711CJ	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Ceramic				No	2	BIPOLAR						12,-6 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T14				No
TLC339CPWG4	Texas Instruments	Comparator	Commercial	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	Yes	4	CMOS		80 μA		Tube	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)	2 pA	2.5 µs	Open-Drain	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		e4		260 °C (500 °F)	0.197 in (5 mm)
TLC374CN-AE4	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	No	4	CMOS		800 μA			5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)	600 pA	650 ns	Open-Drain	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No		e4			0.76 in (19.305 mm)
TL810MJ	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic				No		BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T14				No
TLC3704CN	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy	-18 V	6.5 mV	600 pA	No	4	CMOS		80 μA		Tube	5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)	30 pA	2.7 µs	Push-Pull	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No		e4			0.76 in (19.305 mm)
TL720CN	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy	-7 V	10 mV	150 uA	No	2	BIPOLAR			-6 V		12 V		In-Line	DIP14,.3	Comparators	14 V	0.1 in (2.54 mm)	70 °C (158 °F)		40 ns	Open-Collector	0 °C (32 °F)		Dual	R-PDIP-T14				No
5962-01-090-1934	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic				No		BIPOLAR	MIL-STD-883 Class B (Modified)						In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T14				No
TL510MJ/883B	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic				No		BIPOLAR	MIL-STD-883 Class B (Modified)						In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T14				No
LM3302D	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		40 mV	-1 uA	Yes	4	BIPOLAR		2 mA		Tube	5 V	5 V	Small Outline	SOP14,.25	Comparators	28 V	0.05 in (1.27 mm)	85 °C (185 °F)	500 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4		260 °C (500 °F)	0.341 in (8.65 mm)
TL810CNP3	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy				No		BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T14
LM106W	Texas Instruments	Comparator	Military	Flat	14	DFP	Rectangular		Ceramic				Yes		BIPOLAR						12,-3/-12 V	Flatpack	FL14,.3	Comparators		0.05 in (1.27 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDFP-F14				No

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.