16 Comparators 511

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
MAX924EPE	Maxim Integrated	Comparator	Industrial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		No	4	CMOS		9 μA			3 V	3/5 V	In-Line	DIP16,.3	Comparators	12 V	0.1 in (2.54 mm)	85 °C (185 °F)		14 µs		-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T16	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0			0.755 in (19.175 mm)
MAX901BEPE	Maxim Integrated	Comparator	Industrial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy	-6 V	6 mV	15 uA	No	4	CMOS		25 mA	-5 V		5 V	5,5/10,GND/-5 V	In-Line	DIP16,.3	Comparators	6 V	0.1 in (2.54 mm)	85 °C (185 °F)	10 uA	10 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T16	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0		245 °C (473 °F)	0.755 in (19.175 mm)
MAX970EEE	Maxim Integrated	Comparator	Industrial	Gull Wing	16	SSOP	Rectangular	Plastic/Epoxy		10 mV	50 nA	Yes	4	CMOS		18 μA			3 V	1.5/5.5 V	Small Outline, Shrink Pitch	SSOP16,.25	Comparators	6 V	0.025 in (0.635 mm)	85 °C (185 °F)	50 nA	20 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	240 °C (464 °F)	0.193 in (4.89 mm)
MAX9687ESE	Maxim Integrated	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-6 V	7 mV	30 uA	Yes	2	BIPOLAR			-5 V		5 V	5,-5.2 V	Small Outline	SOP16,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	20 uA		Open-Emitter	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G16	1			No	e0
MAX924CSE-T	Maxim Integrated	Comparator	Commercial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		Yes	4	CMOS		9 μA			3 V	3/5 V	Small Outline	SOP16,.25	Comparators	12 V	0.05 in (1.27 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G16		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.39 in (9.9 mm)
MAX974EPE	Maxim Integrated	Comparator	Industrial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy	0 V	10 mV		No	4			8 μA	0 V		3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	85 °C (185 °F)		300 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T16	1	0.225 in (5.72 mm)	0.3 in (7.62 mm)	No	e0		245 °C (473 °F)
TA8517F	Toshiba	Comparator	Commercial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy		10 mV	6 uA	Yes	2	BIPOLAR		40 mA			5 V	5 V	Small Outline	SOP16,.25	Comparators	7 V	0.05 in (1.27 mm)	70 °C (158 °F)	6 uA	11 ns		-20 °C (-4 °F)	Tin/Lead	Dual	R-PDSO-G16		0.075 in (1.9 mm)	0.173 in (4.4 mm)	No	e0			0.394 in (10 mm)
5962-01-142-1743	Renesas Electronics	Comparator	Military	Through-Hole	16	DIP	Rectangular	Ceramic		4 mV		No		BIPOLAR	38535Q/M;38534H;883B	20 mA				5,±15 V	In-Line	DIP16,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)	75 nA	180 ns		-55 °C (-67 °F)		Dual	R-XDIP-T16				No
5962-01-130-4015	Renesas Electronics	Comparator	Commercial	Through-Hole	16	DIP	Rectangular	Ceramic		10 mV		No		BIPOLAR		20 mA				5,±15 V	In-Line	DIP16,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)	150 nA	180 ns		0 °C (32 °F)		Dual	R-XDIP-T16	1			No
EL5485CS-T7	Renesas Electronics	Comparator	Industrial	Gull Wing	16		Rectangular	Plastic/Epoxy	-6.3 V	4 mV		Yes	4			13.5 mA	-5 V	Tape And Reel	5 V				Comparators	6.3 V		85 °C (185 °F)		4 ns		-40 °C (-40 °F)		Dual	R-PDSO-G16
5962-01-086-6019	Renesas Electronics	Comparator	Military	Through-Hole	16	DIP	Rectangular	Ceramic		4 mV		No		BIPOLAR		20 mA				5,±15 V	In-Line	DIP16,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)	75 nA	180 ns		-55 °C (-67 °F)		Dual	R-XDIP-T16	1			No
5962-01-246-7083	Renesas Electronics	Comparator	Military	Through-Hole	16	DIP	Rectangular	Ceramic		8 mV		No		BIPOLAR	38535Q/M;38534H;883B	20 mA				5,±15 V	In-Line	DIP16,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)	150 nA	180 ns		-55 °C (-67 °F)		Dual	R-XDIP-T16				No
HA3-4905-5	Renesas Electronics	Comparator	Commercial Extended	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy		10 mV	300 nA	No	4				-15 V		15 V		In-Line		Comparators	33 V	0.1 in (2.54 mm)	75 °C (167 °F)		180 ns	Open-Drain	0 °C (32 °F)		Dual	R-PDIP-T16		0.21 in (5.33 mm)	0.3 in (7.62 mm)					0.755 in (19.17 mm)
ISL55141IRZ-T7	Renesas Electronics	Comparator	Industrial	No Lead	16	HQCCN	Square	Plastic/Epoxy	-0.5 V	50 mV		No	1	CMOS		12.5 mA		Tape And Reel	15 V		Chip Carrier, Heat Sink/Slug	LCC16,.16SQ,20	Comparators	18 V	0.02 in (0.5 mm)	85 °C (185 °F)	25 nA			-40 °C (-40 °F)		Quad	S-PQCC-N16		0.041 in (1.05 mm)	0.157 in (4 mm)					0.157 in (4 mm)
EL5485CS	Renesas Electronics	Comparator	Industrial	Gull Wing	16		Rectangular	Plastic/Epoxy	-6.3 V	4 mV		Yes	4			13.5 mA	-5 V		5 V				Comparators	6.3 V		85 °C (185 °F)		4 ns		-40 °C (-40 °F)		Dual	R-PDSO-G16
5962-01-231-5882	Renesas Electronics	Comparator	Military	Through-Hole	16	DIP	Rectangular	Ceramic		8 mV		No		BIPOLAR		20 mA				5,±15 V	In-Line	DIP16,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)	150 nA	180 ns		-55 °C (-67 °F)		Dual	R-XDIP-T16	1			No
EL5481CS-T7	Renesas Electronics	Comparator	Industrial	Gull Wing	16		Rectangular	Plastic/Epoxy	-6.3 V	4 mV		Yes	4			8.2 mA	-5 V	Tape And Reel, 7 Inch	5 V				Comparators	6.3 V		85 °C (185 °F)	6 uA	8 ns	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G16
5962-01-194-5683	Renesas Electronics	Comparator	Military	Through-Hole	16	DIP	Rectangular	Ceramic		8 mV		No		BIPOLAR	38535Q/M;38534H;883B	20 mA				5,±15 V	In-Line	DIP16,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)	150 nA	180 ns		-55 °C (-67 °F)		Dual	R-XDIP-T16				No
HA9P4905-5	Renesas Electronics	Comparator	Commercial Extended	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy		10 mV	300 nA	Yes	4				-15 V		15 V		Small Outline		Comparators	33 V	0.05 in (1.27 mm)	75 °C (167 °F)		180 ns	Open-Drain	0 °C (32 °F)		Dual	R-PDSO-G16		0.104 in (2.65 mm)	0.295 in (7.5 mm)					0.406 in (10.3 mm)
5962-8686001EX	Renesas Electronics	Comparator	Military	Through-Hole	16	DIP	Rectangular	Ceramic, Glass-Sealed		5 mV		No	4	BIPOLAR			-15 V		15 V		In-Line		Comparators			125 °C (257 °F)		200 ns	Totem Pole	-55 °C (-67 °F)	Tin Lead	Dual	R-GDIP-T16				Yes	e0
ISL55141IRZ-T	Renesas Electronics	Comparator	Industrial	No Lead	16	HVQCCN	Square	Plastic/Epoxy		50 mV	25 nA	Yes	1	CMOS		12.5 mA			12 V	10/18 V	Chip Carrier, Heat Sink/Slug, Very Thin Profile	LCC16,.16SQ,20	Comparators	19 V	0.02 in (0.5 mm)	85 °C (185 °F)	25 nA	9.5 ns	3-State	-40 °C (-40 °F)	Matte Tin	Quad	S-PQCC-N16	1	0.039 in (1 mm)	0.157 in (4 mm)	No	e3	30 s	260 °C (500 °F)	0.157 in (4 mm)
EL5481CS-T13	Renesas Electronics	Comparator	Industrial	Gull Wing	16		Rectangular	Plastic/Epoxy	-6.3 V	4 mV		Yes	4			8.2 mA	-5 V	Tape And Reel, 13 Inch	5 V				Comparators	6.3 V		85 °C (185 °F)	6 uA	8 ns	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G16
ISL55141IRZ-T13	Renesas Electronics	Comparator	Industrial	No Lead	16	HQCCN	Square	Plastic/Epoxy	-0.5 V	50 mV		No	1	CMOS		12.5 mA		Tape And Reel	15 V		Chip Carrier, Heat Sink/Slug	LCC16,.16SQ,20	Comparators	18 V	0.02 in (0.5 mm)	85 °C (185 °F)	25 nA			-40 °C (-40 °F)		Quad	S-PQCC-N16		0.041 in (1.05 mm)	0.157 in (4 mm)					0.157 in (4 mm)
HA1-4900-2/883	Renesas Electronics	Comparator	Military	Through-Hole	16	DIP	Rectangular	Ceramic, Metal-Sealed Cofired	-16.5 V	4 mV	150 nA	No	4	BIPOLAR	MIL-STD-883		-15 V		15 V		In-Line		Comparators	16.5 V	0.1 in (2.54 mm)	125 °C (257 °F)		180 ns	Push-Pull	-55 °C (-67 °F)		Dual	R-CDIP-T16		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No
HA1-4905-5	Renesas Electronics	Comparator	Commercial Extended	Through-Hole	16	DIP	Rectangular	Ceramic, Metal-Sealed Cofired		10 mV	300 nA	No	4				-15 V		15 V		In-Line		Comparators	33 V	0.1 in (2.54 mm)	75 °C (167 °F)		180 ns	Open-Drain	0 °C (32 °F)	Tin Lead	Dual	R-CDIP-T16		0.2 in (5.08 mm)	0.3 in (7.62 mm)		e0			0.84 in (21.34 mm)
5962-01-111-0891	Renesas Electronics	Comparator	Military	Through-Hole	16	DIP	Rectangular	Ceramic				No		BIPOLAR	MIL-STD-883 Class B (Modified)						In-Line	DIP16,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T16				No
HA1-4902-2	Renesas Electronics	Comparator	Military	Through-Hole	16	DIP	Rectangular	Ceramic, Metal-Sealed Cofired		8 mV	200 nA	No	4				-15 V	Tube	15 V		In-Line		Comparators	33 V	0.1 in (2.54 mm)	125 °C (257 °F)		180 ns	Open-Drain	-55 °C (-67 °F)	Tin Lead	Dual	R-CDIP-T16		0.2 in (5.08 mm)	0.3 in (7.62 mm)		e0			0.84 in (21.34 mm)
ISL55141IRZ	Renesas Electronics	Comparator	Industrial	No Lead	16	HVQCCN	Square	Plastic/Epoxy		50 mV	25 nA	Yes	1	CMOS		12.5 mA			12 V	10/18 V	Chip Carrier, Heat Sink/Slug, Very Thin Profile	LCC16,.16SQ,20	Comparators	19 V	0.02 in (0.5 mm)	85 °C (185 °F)	25 nA	9.5 ns	3-State	-40 °C (-40 °F)	Matte Tin	Quad	S-PQCC-N16	1	0.039 in (1 mm)	0.157 in (4 mm)	No	e3	30 s	260 °C (500 °F)	0.157 in (4 mm)
HA4902-2	Renesas Electronics	Comparator	Military	Through-Hole	16	DIP	Rectangular	Ceramic, Metal-Sealed Cofired		8 mV	200 nA	No	4	BIPOLAR					15 V		In-Line		Comparators	33 V	0.1 in (2.54 mm)	125 °C (257 °F)		180 ns		-55 °C (-67 °F)		Dual	R-CDIP-T16		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No
EL5485CS-T13	Renesas Electronics	Comparator	Industrial	Gull Wing	16		Rectangular	Plastic/Epoxy	-6.3 V	4 mV		Yes	4			13.5 mA	-5 V	Tape And Reel	5 V				Comparators	6.3 V		85 °C (185 °F)		4 ns		-40 °C (-40 °F)		Dual	R-PDSO-G16
EL5481CS	Renesas Electronics	Comparator	Industrial	Gull Wing	16		Rectangular	Plastic/Epoxy	-6.3 V	4 mV		Yes	4			8.2 mA	-5 V		5 V				Comparators	6.3 V		85 °C (185 °F)	6 uA	8 ns	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G16

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.