16 Comparators 511

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
AD8598AR-REEL	Analog Devices	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-7 V	8 mV		Yes	2	BIPOLAR		15 mA	-5 V	Tape And Reel	5 V	3/5/±5 V	Small Outline	SOP16,.25	Comparators	7 V	0.05 in (1.27 mm)	85 °C (185 °F)	6 uA	7 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G16		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.39 in (9.9 mm)
AD8598AN	Analog Devices	Comparator	Industrial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy	-7 V	8 mV		No	2	BIPOLAR		15 mA	-5 V		5 V	3/5/±5 V	In-Line	DIP16,.3	Comparators	7 V	0.1 in (2.54 mm)	85 °C (185 °F)	6 uA	7 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T16		0.21 in (5.33 mm)	0.3 in (7.62 mm)	No	e0			0.793 in (20.13 mm)
HMC674LP3E	Analog Devices	Comparator	Industrial	No Lead	16	HVQCCN	Square	Plastic/Epoxy				Yes	1				-3 V		3.3 V		Chip Carrier, Heat Sink/Slug, Very Thin Profile		Comparators	4 V	0.02 in (0.5 mm)	85 °C (185 °F)		0.085 ns		-40 °C (-40 °F)	Matte Tin - annealed	Quad	S-PQCC-N16	1	0.039 in (1 mm)	0.118 in (3 mm)	No	e3			0.118 in (3 mm)
M38510/10305BEX	Analog Devices	Comparator	Military	Through-Hole	16	DIP	Rectangular	Ceramic, Metal-Sealed Cofired	-18 V	4 mV	150 nA	No	2				-15 V		15 V		In-Line		Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)		200 ns	Open-Collector	-55 °C (-67 °F)	Tin Lead	Dual	R-CDIP-T16		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0
LTC1445CS#TRPBF	Analog Devices	Comparator	Commercial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		Yes	4				0 V	Tape And Reel	3 V		Small Outline		Comparators	12 V	0.05 in (1.27 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)	Matte Tin	Dual	R-PDSO-G16	1	0.069 in (1.752 mm)	0.154 in (3.899 mm)	No	e3	30 s	260 °C (500 °F)	0.39 in (9.906 mm)
5962-9234703VHX	Analog Devices	Comparator	Military	Flat	16	DFP	Rectangular	Ceramic, Metal-Sealed Cofired	-7 V	3 mV	110 uA	Yes	1	BIPOLAR	MIL-PRF-38535 Class V		-5 V		5 V		Flatpack			7 V		125 °C (257 °F)				-55 °C (-67 °F)	Tin Lead	Dual	R-CDFP-F16				No	e0
HMC974LC3C	Analog Devices	Comparator	Industrial	No Lead	16	HVQCCN	Square	Ceramic, Metal-Sealed Cofired	-3.3 V	10 mV	30 uA	Yes	1	BIPOLAR		79.6 mA	-3 V		3.3 V	-3,2,3.3 V	Chip Carrier, Heat Sink/Slug, Very Thin Profile	LCC16,.12SQ,20	Comparators	4 V	0.02 in (0.5 mm)	85 °C (185 °F)	30 uA	0.088 ns		-40 °C (-40 °F)	Gold Over Nickel	Quad	S-CQCC-N16	3	0.035 in (0.9 mm)	0.114 in (2.9 mm)	No	e4	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
ADCMP551BRQZ-REEL7	Analog Devices	Comparator	Industrial	Gull Wing	16	SSOP	Rectangular	Plastic/Epoxy		10 mV	5 uA	Yes	1	BIPOLAR		17 mA		Tape And Reel, 7 Inch	3.3 V	3.3 V	Small Outline, Shrink Pitch	SSOP16,.25	Comparators	6 V	0.025 in (0.64 mm)	85 °C (185 °F)	5 uA	0.5 ns	Open-Emitter	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.91 mm)	No	e3		260 °C (500 °F)	0.193 in (4.9 mm)
LTC1444CN	Analog Devices	Comparator	Commercial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		No	4	CMOS			0 V		3 V		In-Line		Comparators	12 V	0.1 in (2.54 mm)	70 °C (158 °F)		14 µs	Open-Drain	0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T16	1	0.155 in (3.937 mm)	0.3 in (7.62 mm)	No	e0
LT1714IGN#TR	Analog Devices	Comparator	Industrial	Gull Wing	16	SSOP	Rectangular	Plastic/Epoxy	-6.3 V	4 mV	5 uA	Yes	2				-5 V	Tape And Reel	5 V		Small Outline, Shrink Pitch		Comparators	6.3 V	0.025 in (0.635 mm)	85 °C (185 °F)		8.5 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9116 mm)	No	e0			0.193 in (4.9 mm)
ADCMP396ARZ-R7	Analog Devices	Comparator		Gull Wing	16	SOP	Rectangular	Plastic/Epoxy		4 mV	80 nA	Yes	4			63 μA		Tape And Reel, 7 Inch			Small Outline	SOP16,.25	Comparators	6 V	0.05 in (1.27 mm)	125 °C (257 °F)	80 nA	4.85 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G16		0.069 in (1.75 mm)	0.154 in (3.9 mm)		e3			0.39 in (9.9 mm)
LTC1445CS#PBF	Analog Devices	Comparator	Commercial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		Yes	4	CMOS			0 V		3 V		Small Outline		Comparators	12 V	0.05 in (1.27 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)	Matte Tin	Dual	R-PDSO-G16	1	0.069 in (1.752 mm)	0.154 in (3.899 mm)	No	e3	30 s	260 °C (500 °F)	0.39 in (9.906 mm)
LTC1443IS#PBF	Analog Devices	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		Yes	4	CMOS			0 V		3 V		Small Outline		Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)		14 µs		-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G16	1	0.069 in (1.752 mm)	0.154 in (3.899 mm)	No	e3	30 s	260 °C (500 °F)	0.39 in (9.906 mm)
HMC675LC3CRTR	Analog Devices	Comparator	Industrial	No Lead	16	QCCN	Square	Ceramic				Yes	1					Tape And Reel		-3,3.3 V	Chip Carrier	LCC16,.12SQ,20	Comparators		0.02 in (0.5 mm)	85 °C (185 °F)		0.1 ns		-40 °C (-40 °F)		Quad	S-XQCC-N16				No
LTC1443CS#TR	Analog Devices	Comparator	Commercial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		Yes	4	CMOS			0 V	Tape And Reel	3 V		Small Outline		Comparators	12 V	0.05 in (1.27 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G16	1	0.069 in (1.752 mm)	0.154 in (3.899 mm)	No	e0			0.39 in (9.906 mm)
LTC1444IS#PBF	Analog Devices	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		Yes	4	CMOS			0 V		3 V		Small Outline		Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)		14 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G16	1	0.069 in (1.752 mm)	0.154 in (3.899 mm)	No	e3	30 s	260 °C (500 °F)	0.39 in (9.906 mm)
AD9685TD	Analog Devices	Comparator	Military	Through-Hole	16	DIP	Rectangular	Ceramic		7 mV		No		BIPOLAR		34 mA				5,-5.2 V	In-Line	DIP16,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)	15 uA	2.7 ns		-55 °C (-67 °F)	Tin Lead	Dual	R-XDIP-T16				No	e0
AD96687TQ	Analog Devices	Comparator	Military	Through-Hole	16	DIP	Rectangular	Ceramic, Glass-Sealed	-6.5 V	3 mV	16 uA	No	2	BIPOLAR		36 mA	-5.2 V		5 V	5,-5.2 V	In-Line	DIP16,.3	Comparators	6.5 V	0.1 in (2.54 mm)	125 °C (257 °F)	10 uA	2.5 ns	Open-Emitter	-55 °C (-67 °F)	Tin Lead	Dual	R-GDIP-T16		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0
LT1017CSW#PBF	Analog Devices	Comparator	Commercial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-20 V	1.4 mV	25 nA	Yes	2				0 V		4.5 V		Small Outline		Comparators	40 V	0.05 in (1.27 mm)	70 °C (158 °F)			Open-Collector	0 °C (32 °F)	Matte Tin	Dual	R-PDSO-G16	1	0.104 in (2.642 mm)	0.295 in (7.493 mm)	No	e3	30 s	260 °C (500 °F)	0.406 in (10.3 mm)
AD96687BQ	Analog Devices	Comparator	Other	Through-Hole	16	DIP	Rectangular	Ceramic, Glass-Sealed	-6.5 V	3 mV	13 uA	No	2	BIPOLAR		36 mA	-5.2 V		5 V	5,-5.2 V	In-Line	DIP16,.3	Comparators	6.5 V	0.1 in (2.54 mm)	85 °C (185 °F)	10 uA	2.5 ns	Open-Emitter	-25 °C (-13 °F)	Tin Lead	Dual	R-GDIP-T16		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0			0.75 in (19.05 mm)
AD8564AR-REEL	Analog Devices	Comparator	Automotive	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-7 V	10 mV	9 uA	Yes	4			15.6 mA	-5 V	Tape And Reel	5 V	5,5/10,GND/-5 V	Small Outline	SOP16,.25	Comparators	7 V	0.05 in (1.27 mm)	125 °C (257 °F)	400 nA	8 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0		240 °C (464 °F)	0.39 in (9.9 mm)
MAX9693ESE+T	Analog Devices	Comparator	Industrial	Gull Wing	16	HSSOP	Rectangular	Plastic/Epoxy	-6 V	11.5 mV	30 uA	Yes	2			50 mA	-5.2 V		5 V	5,-5.2 V	Small Outline, Heat Sink/Slug, Shrink Pitch	SOP16,.25	Comparators	6 V	0.025 in (0.635 mm)	85 °C (185 °F)	20 uA	2 ns	Open-Emitter	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G16	1	0.068 in (1.73 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.89 mm)
MAX9201EUE+	Analog Devices	Comparator	Industrial	Gull Wing	16	TSSOP	Rectangular	Plastic/Epoxy	-6 V	7.5 mV	7 uA	Yes	4	BIPOLAR			-5 V		5 V	±5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP16,.25	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	5 uA	7 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G16	1	0.043 in (1.1 mm)	0.173 in (4.4 mm)	No	e3	30 s	260 °C (500 °F)	0.197 in (5 mm)
MAX901AESE+T	Analog Devices	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-6 V	3 mV	10 uA	Yes	4	CMOS		25 mA	-5 V		5 V	5,5/10,GND/-5 V	Small Outline	SOP16,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	6 uA	10 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.39 in (9.9 mm)
MAX901ACWE	Analog Devices	Comparator	Commercial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy		2 mV		Yes				25 mA				5,5/10,GND/-5 V	Small Outline	SOP16,.4	Comparators		0.05 in (1.27 mm)	70 °C (158 °F)	6 uA	10 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G16				No	e0
MAX970EEE+	Analog Devices	Comparator	Industrial	Gull Wing	16	SSOP	Rectangular	Plastic/Epoxy		10 mV	50 nA	Yes	4	CMOS		18 μA			3 V	1.5/5.5 V	Small Outline, Shrink Pitch	SSOP16,.25	Comparators	6 V	0.025 in (0.635 mm)	85 °C (185 °F)	50 nA	20 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.89 mm)
MAX912CSE+T	Analog Devices	Comparator	Commercial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-7 V	3 mV	8 uA	Yes	2	BIPOLAR		10 mA	-5 V		5 V	5/±5 V	Small Outline	SOP16,.25	Comparators	7 V	0.05 in (1.27 mm)	70 °C (158 °F)	5 uA	10 ns		0 °C (32 °F)	Matte Tin - annealed	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.39 in (9.9 mm)
MAX9201ESE+T	Analog Devices	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-6 V	7.5 mV	7 uA	Yes	4	BIPOLAR			-5 V		5 V	±5 V	Small Outline	SOP16,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	5 uA	7 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.39 in (9.9 mm)
MAX978EEE+T	Analog Devices	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy		3 mV	300 nA	Yes	4	CMOS		2.6 mA			3 V	3/5 V	Small Outline	SSOP16,.25	Comparators		0.025 in (0.635 mm)	85 °C (185 °F)	300 nA	28 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G16	1			No	e3	30 s	260 °C (500 °F)
MAX901AESE+	Analog Devices	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-6 V	3 mV	10 uA	Yes	4	CMOS		25 mA	-5 V		5 V	5,5/10,GND/-5 V	Small Outline	SOP16,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	6 uA	10 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.39 in (9.9 mm)
MAX901ACSE+	Analog Devices	Comparator	Commercial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-6 V	3 mV	10 uA	Yes	4	CMOS		25 mA	-5 V		5 V	5,5/10,GND/-5 V	Small Outline	SOP16,.25	Comparators	6 V	0.05 in (1.27 mm)	70 °C (158 °F)	6 uA	10 ns		0 °C (32 °F)	Matte Tin - annealed	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.39 in (9.9 mm)
MAX978ESE+	Analog Devices	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy		3 mV	300 nA	Yes	4	CMOS		650 μA			5 V	3/5 V	Small Outline	SOP16,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 nA	28 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3			0.39 in (9.9 mm)
MAX901BESE+	Analog Devices	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-6 V	6 mV	15 uA	Yes	4	CMOS		25 mA	-5 V		5 V	5,5/10,GND/-5 V	Small Outline	SOP16,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	10 uA	10 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.39 in (9.9 mm)
MAX984ESE+	Analog Devices	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	0 V	10 mV		Yes	4			8 μA	0 V		3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)		300 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G16	1			No	e3	30 s	260 °C (500 °F)
MAX906ESE	Analog Devices	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-6 V	3.5 mV	10 uA	Yes	1			48 mA	-5 V		5 V	5/GND,-5/-5.2 V	Small Outline	SOP16,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	10 uA	2 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G16				No	e0
MAX901BCSE+	Analog Devices	Comparator	Commercial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-6 V	6 mV	15 uA	Yes	4	CMOS		25 mA	-5 V		5 V	5,5/10,GND/-5 V	Small Outline	SOP16,.25	Comparators	6 V	0.05 in (1.27 mm)	70 °C (158 °F)	10 uA	10 ns		0 °C (32 °F)	Matte Tin - annealed	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.39 in (9.9 mm)
MAX906MJE	Analog Devices	Comparator	Automotive	Through-Hole	16	DIP	Rectangular	Ceramic, Glass-Sealed				No	2	ECL							In-Line		Comparators			125 °C (257 °F)				-40 °C (-40 °F)	Tin Lead	Dual	R-GDIP-T16				No	e0
MAX9201EUE+T	Analog Devices	Comparator	Industrial	Gull Wing	16	TSSOP	Rectangular	Plastic/Epoxy	-6 V	7.5 mV	7 uA	Yes	4	BIPOLAR			-5 V		5 V	±5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP16,.25	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	5 uA	7 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G16	1	0.043 in (1.1 mm)	0.173 in (4.4 mm)	No	e3	30 s	260 °C (500 °F)	0.197 in (5 mm)
MAX974CSE+	Analog Devices	Comparator	Commercial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	0 V	10 mV		Yes	4			8 μA	0 V		3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP16,.25	Comparators	12 V	0.05 in (1.27 mm)	70 °C (158 °F)		300 µs	Open-Drain	0 °C (32 °F)	Matte Tin - annealed	Dual	R-PDSO-G16	1			No	e3	30 s	260 °C (500 °F)
MAX9201ESE+	Analog Devices	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-6 V	7.5 mV	7 uA	Yes	4	BIPOLAR			-5 V		5 V	±5 V	Small Outline	SOP16,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	5 uA	7 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.39 in (9.9 mm)
MAX969ESE+T	Analog Devices	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy		10 mV	5 nA	Yes	4	CMOS		22 μA			3 V	1.5/5.5 V	Small Outline	SOP16,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	50 nA	20 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G16	1			No	e3	30 s	260 °C (500 °F)
MAX978ESE+T	Analog Devices	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy		3 mV	300 nA	Yes	4	CMOS		2.6 mA			3 V	3/5 V	Small Outline	SOP16,.25	Comparators		0.05 in (1.27 mm)	85 °C (185 °F)	300 nA	28 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G16	1			No	e3
MAX9687EPE	Analog Devices	Comparator	Industrial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy	-6 V	7 mV	30 uA	No	2	BIPOLAR			-5 V		5 V		In-Line			6 V	0.1 in (2.54 mm)	85 °C (185 °F)			Open-Emitter	-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T16		0.225 in (5.72 mm)	0.3 in (7.62 mm)	No	e0
MAX9692ESE+	Analog Devices	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-6 V	11.5 mV	30 uA	Yes	1			36 mA	-5.2 V		5 V	5,-5.2 V	Small Outline	SOP16,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	20 uA	2 ns	Open-Emitter	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.39 in (9.9 mm)
MAX9687MJE-4	Analog Devices	Comparator	Military	Through-Hole	16	DIP	Rectangular	Ceramic		8 mV		No		BIPOLAR						5,-5.2 V	In-Line	DIP16,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)	20 uA			-55 °C (-67 °F)	Tin Lead	Dual	R-XDIP-T16				No	e0
MAX978EEE+	Analog Devices	Comparator	Industrial	Gull Wing	16	SSOP	Rectangular	Plastic/Epoxy		3 mV	300 nA	Yes	4	CMOS		650 μA			5 V	3/5 V	Small Outline, Shrink Pitch	SSOP16,.25	Comparators	6 V	0.025 in (0.635 mm)	85 °C (185 °F)	300 nA	28 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.89 mm)
MAX9692ESE+T	Analog Devices	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-6 V	11.5 mV	30 uA	Yes	1			36 mA	-5.2 V		5 V	5,-5.2 V	Small Outline	SOP16,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	20 uA	2 ns	Open-Emitter	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3			0.39 in (9.9 mm)
MAX924MSE/PR	Analog Devices	Comparator	Military	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		Yes	4			11 μA			3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP16,.25	Comparators	12 V	0.05 in (1.27 mm)	125 °C (257 °F)		14 µs		-55 °C (-67 °F)		Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.39 in (9.9 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.