SOP Comparators 2,179

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Minimum Isolation Voltage Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Sub-Category Nominal Slow Rate Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Nominal Response Time Output Type Minimum Operating Temperature Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

MAX912CSE-T

Maxim Integrated

Comparator

Commercial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-7 V

3 mV

8 uA

Yes

2

BIPOLAR

10 mA

-5 V

5 V

5/±5 V

Small Outline

SOP16,.25

Comparators

7 V

0.05 in (1.27 mm)

70 °C (158 °F)

5 uA

10 ns

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

245 °C (473 °F)

0.39 in (9.9 mm)

LMX339ASD+

Maxim Integrated

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

7 mV

400 nA

Yes

4

CMOS

430 μA

2.7 V

3/5 V

Small Outline

SOP14,.25

Comparators

6 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 nA

500 ns

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

MAX909ESA

Maxim Integrated

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-7 V

3.5 mV

500 nA

Yes

1

BIPOLAR

2 mA

-5 V

5 V

5 V

Small Outline

SOP8,.25

Comparators

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

300 nA

45 ns

-40 °C (-40 °F)

Tin/Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

20 s

240 °C (464 °F)

0.193 in (4.9 mm)

MAX983ESA

Maxim Integrated

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

10 mV

Yes

2

5.8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

Small Outline

SOP8,.25

Comparators

12 V

0.05 in (1.27 mm)

85 °C (185 °F)

300 µs

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

No

e0

MAX9686BCSA

Maxim Integrated

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-6 V

3 mV

25 uA

Yes

1

BIPOLAR

-5 V

5 V

Small Outline

Comparators

6 V

0.05 in (1.27 mm)

70 °C (158 °F)

6 ns

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

e0

0.193 in (4.9 mm)

MAX9051AESA+T

Maxim Integrated

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

7 mV

10 nA

Yes

1

72 μA

5 V

2.7/5.5 V

Small Outline

SOP8,.25

Comparators

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

10 nA

400 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

0.193 in (4.9 mm)

MAX910CWG-T

Maxim Integrated

Comparator

Commercial

Gull Wing

24

SOP

Rectangular

Plastic/Epoxy

-6 V

5 mV

8 uA

Yes

1

30 mA

-5 V

5 V

Small Outline

6 V

70 °C (158 °F)

15 ns

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G24

1

No

e0

MAX994ESD

Maxim Integrated

Comparator

Industrial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

7 mV

10 nA

Yes

4

CMOS

96 μA

0 V

5 V

±1.5/±2.5/3/5 V

Small Outline

SOP14,.25

Comparators

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

10 nA

300 ns

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.341 in (8.65 mm)

MAX900ACWP+T

Maxim Integrated

Comparator

Commercial

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

-6 V

3 mV

10 uA

Yes

4

CMOS

25 mA

-5 V

5 V

5,5/10,GND/-5 V

Small Outline

SOP20,.4

Comparators

6 V

0.05 in (1.27 mm)

70 °C (158 °F)

6 uA

10 ns

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-G20

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e3

0.504 in (12.8 mm)

MAX9690CSA

Maxim Integrated

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-6 V

7 mV

30 uA

Yes

1

BIPOLAR

-5.2 V

5 V

5,-5.2 V

Small Outline

SOP8,.25

Comparators

6 V

0.05 in (1.27 mm)

70 °C (158 °F)

20 uA

2 ns

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G8

1

No

e0

20 s

240 °C (464 °F)

MAX9698BCSE+

Maxim Integrated

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-6 V

3 mV

25 uA

Yes

1

BIPOLAR

-5 V

5 V

Small Outline

Comparators

6 V

0.05 in (1.27 mm)

70 °C (158 °F)

6 ns

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

MAX9685ESE

Maxim Integrated

Comparator

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-6 V

7 mV

30 uA

Yes

1

ECL

36 mA

-5.2 V

5 V

Small Outline

Comparators

6 V

85 °C (185 °F)

1.5 ns

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G16

1

No

e0

MAX916ESE

Maxim Integrated

Comparator

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-6 V

2.5 mV

15 uA

Yes

2

CMOS

44 mA

-5 V

5 V

5/±5 V

Small Outline

SOP16,.25

Comparators

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

10 uA

6 ns

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

245 °C (473 °F)

0.39 in (9.9 mm)

MAX986ESA+

Maxim Integrated

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

7 mV

10 nA

Yes

1

CMOS

24 μA

0 V

5 V

±1.5/±2.5/3/5 V

Small Outline

SOP8,.25

Comparators

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

10 nA

300 ns

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

MAX966ESA

Maxim Integrated

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

7 mV

50 nA

Yes

2

CMOS

10 μA

3 V

1.5/5.5 V

Small Outline

SOP8,.25

Comparators

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

50 nA

20 µs

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.193 in (4.9 mm)

MAX9685CSE

Maxim Integrated

Comparator

Commercial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-6 V

7 mV

30 uA

Yes

1

ECL

36 mA

-5.2 V

5 V

5,-5.2 V

Small Outline

SOP16,.25

Comparators

6 V

0.05 in (1.27 mm)

70 °C (158 °F)

20 uA

1.5 ns

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G16

1

No

e0

MAX992ESA-T

Maxim Integrated

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

7 mV

10 nA

Yes

2

CMOS

192 μA

0 V

2.7 V

±1.5/±2.5/3/5 V

Small Outline

SOP8,.25

Comparators

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

10 nA

210 ns

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.193 in (4.9 mm)

MAX9077MSA/PR2-T

Maxim Integrated

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

8 mV

-20 nA

Yes

2

BICMOS

7.5 μA

5 V

2.1/5.5 V

Small Outline

SOP8,.25

Comparators

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

20 nA

580 ns

Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-G8

No

MAX902CSD-T

Maxim Integrated

Comparator

Commercial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

-6 V

6 mV

15 uA

Yes

2

CMOS

12 mA

-5 V

5 V

5,5/10,GND/-5 V

Small Outline

SOP14,.25

Comparators

6 V

0.05 in (1.27 mm)

70 °C (158 °F)

10 uA

10 ns

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.341 in (8.65 mm)

MAX982CUA

Maxim Integrated

Comparator

Commercial

Gull Wing

8

SOP

Square

Plastic/Epoxy

0 V

10 mV

Yes

2

5.8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

Small Outline

TSSOP8,.19

Comparators

12 V

0.025 in (0.635 mm)

70 °C (158 °F)

300 µs

Open-Drain

0 °C (32 °F)

Tin Lead

Dual

S-PDSO-G8

1

No

e0

MAX9022ASA-T

Maxim Integrated

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

8 mV

80 nA

Yes

2

10 μA

0 V

5 V

±1.25/±2.75/2.5/5.5 V

Small Outline

SOP8,.25

Comparators

6 V

0.05 in (1.27 mm)

125 °C (257 °F)

8 µs

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.193 in (4.9 mm)

MAX971CSA

Maxim Integrated

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

10 mV

Yes

1

3.8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

Small Outline

SOP8,.25

Comparators

12 V

0.05 in (1.27 mm)

70 °C (158 °F)

300 µs

Open-Drain

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G8

1

No

e0

MAX9041AESA

Maxim Integrated

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

7 mV

10 nA

Yes

1

5 V

Small Outline

Comparators

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

450 ns

Push-Pull

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.193 in (4.9 mm)

MAX994ESD-T

Maxim Integrated

Comparator

Industrial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

7 mV

10 nA

Yes

4

24 μA

0 V

5 V

±1.5/±2.5/3/5 V

Small Outline

SOP14,.25

Comparators

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

10 nA

300 ns

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.341 in (8.65 mm)

MAX900ACWP+

Maxim Integrated

Comparator

Commercial

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

-6 V

3 mV

10 uA

Yes

4

CMOS

25 mA

-5 V

5 V

5,5/10,GND/-5 V

Small Outline

SOP20,.4

Comparators

6 V

0.05 in (1.27 mm)

70 °C (158 °F)

6 uA

10 ns

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-G20

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e3

30 s

260 °C (500 °F)

0.504 in (12.8 mm)

MAX981ESA

Maxim Integrated

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

10 mV

Yes

1

3.8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

Small Outline

SOP8,.25

Comparators

12 V

0.05 in (1.27 mm)

85 °C (185 °F)

300 µs

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

No

e0

LMX339HASD

Maxim Integrated

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

7 mV

400 nA

Yes

4

CMOS

430 μA

2.7 V

3/5 V

Small Outline

SOP14,.25

Comparators

6 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 nA

500 ns

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

245 °C (473 °F)

0.341 in (8.65 mm)

MAX9051AESA-T

Maxim Integrated

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

7 mV

10 nA

Yes

1

72 μA

5 V

2.7/5.5 V

Small Outline

SOP8,.25

Comparators

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

10 nA

450 ns

Push-Pull

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.193 in (4.9 mm)

MAX901ACSE

Maxim Integrated

Comparator

Commercial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-6 V

3 mV

10 uA

Yes

4

CMOS

25 mA

-5 V

5 V

5,5/10,GND/-5 V

Small Outline

SOP16,.25

Comparators

6 V

0.05 in (1.27 mm)

70 °C (158 °F)

6 uA

10 ns

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.39 in (9.9 mm)

MAX974ESE

Maxim Integrated

Comparator

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

0 V

10 mV

Yes

4

8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

Small Outline

SOP8,.25

Comparators

12 V

0.05 in (1.27 mm)

85 °C (185 °F)

300 µs

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G16

1

No

e0

20 s

240 °C (464 °F)

MAX974CSE-T

Maxim Integrated

Comparator

Commercial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

0 V

10 mV

Yes

4

8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

Small Outline

SOP16,.25

Comparators

12 V

0.05 in (1.27 mm)

70 °C (158 °F)

300 µs

Open-Drain

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G16

No

e0

MAX911CAG

Maxim Integrated

Comparator

Commercial

Gull Wing

24

SOP

Rectangular

Plastic/Epoxy

-6 V

5 mV

8 uA

Yes

1

30 mA

-5 V

5 V

±5 V

Small Outline

SSOP24,.3

Comparators

6 V

0.025 in (0.635 mm)

70 °C (158 °F)

6 uA

8 ns

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G24

No

e0

MAX901BESE-T

Maxim Integrated

Comparator

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-6 V

6 mV

15 uA

Yes

4

CMOS

25 mA

-5 V

5 V

5,5/10,GND/-5 V

Small Outline

SOP16,.25

Comparators

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

10 uA

10 ns

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.39 in (9.9 mm)

MAX901BCSE-T

Maxim Integrated

Comparator

Commercial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-6 V

6 mV

15 uA

Yes

4

CMOS

25 mA

-5 V

5 V

5,5/10,GND/-5 V

Small Outline

SOP16,.25

Comparators

6 V

0.05 in (1.27 mm)

70 °C (158 °F)

10 uA

10 ns

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.39 in (9.9 mm)

MAX972CUA

Maxim Integrated

Comparator

Commercial

Gull Wing

8

SOP

Square

Plastic/Epoxy

0 V

10 mV

Yes

2

3.8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

Small Outline

TSSOP8,.19

Comparators

12 V

0.025 in (0.635 mm)

70 °C (158 °F)

300 µs

Open-Drain

0 °C (32 °F)

Tin Lead

Dual

S-PDSO-G8

1

No

e0

MAX974ESE-T

Maxim Integrated

Comparator

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

0 V

10 mV

Yes

4

8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

Small Outline

SOP8,.25

Comparators

12 V

0.05 in (1.27 mm)

85 °C (185 °F)

300 µs

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G16

No

e0

MAX916CSE

Maxim Integrated

Comparator

Commercial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-6 V

2.5 mV

15 uA

Yes

2

CMOS

44 mA

-5 V

5 V

5/±5 V

Small Outline

SOP16,.25

Comparators

6 V

0.05 in (1.27 mm)

70 °C (158 °F)

10 uA

6 ns

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G16

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.39 in (9.9 mm)

MXL1016CS8-C60349+

Maxim Integrated

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-7 V

3.5 mV

13 uA

Yes

1

-5 V

5 V

Small Outline

Comparators

7 V

0.05 in (1.27 mm)

85 °C (185 °F)

10 ns

Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-G8

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

0.193 in (4.9 mm)

MAX921CSA-G05

Maxim Integrated

Comparator

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

10 mV

Yes

1

4 μA

3 V

Small Outline

SOP8,.25

Comparators

12 V

0.05 in (1.27 mm)

70 °C (158 °F)

14 µs

0 °C (32 °F)

Dual

R-PDSO-G8

0.069 in (1.75 mm)

0.154 in (3.9 mm)

0.193 in (4.9 mm)

MAX971CSA-T

Maxim Integrated

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

10 mV

Yes

1

3.8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

Small Outline

SOP8,.25

Comparators

12 V

0.05 in (1.27 mm)

70 °C (158 °F)

300 µs

Open-Drain

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G8

No

e0

MAX981CUA

Maxim Integrated

Comparator

Commercial

Gull Wing

8

SOP

Square

Plastic/Epoxy

0 V

10 mV

Yes

1

3.8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

Small Outline

TSSOP8,.19

Comparators

12 V

0.025 in (0.635 mm)

70 °C (158 °F)

300 µs

Open-Drain

0 °C (32 °F)

Tin Lead

Dual

S-PDSO-G8

1

No

e0

MAX977ESD+T

Maxim Integrated

Comparator

Industrial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

3 mV

-300 nA

Yes

2

CMOS

5 μA

5.25 V

3/5 V

Small Outline

SOP14,.25

Comparators

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

300 nA

28 ns

-40 °C (-40 °F)

Tin

Dual

R-PDSO-G14

1

No

e3

MAX990ESA

Maxim Integrated

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

7 mV

10 nA

Yes

2

CMOS

48 μA

0 V

5 V

±1.5/±2.5/3/5 V

Small Outline

SOP8,.25

Comparators

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

10 nA

300 ns

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.193 in (4.9 mm)

MAX9693EEE-T

Maxim Integrated

Comparator

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-6 V

11.5 mV

30 uA

Yes

2

50 mA

-5.2 V

5 V

5,-5.2 V

Small Outline

SSOP16,.25

Comparators

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

20 uA

2 ns

Open-Emitter

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.39 in (9.9 mm)

MAX9032ASA-T

Maxim Integrated

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

5 mV

80 nA

Yes

2

110 μA

0 V

5 V

3/5 V

Small Outline

SOP8,.25

Comparators

6 V

0.05 in (1.27 mm)

125 °C (257 °F)

80 nA

Push-Pull

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.193 in (4.9 mm)

MAX986ESA+T

Maxim Integrated

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

7 mV

10 nA

Yes

1

CMOS

24 μA

0 V

5 V

±1.5/±2.5/3/5 V

Small Outline

SOP8,.25

Comparators

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

10 nA

300 ns

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

MAX9075EUK

Maxim Integrated

Comparator

Industrial

Gull Wing

5

SOP

Rectangular

Plastic/Epoxy

8 mV

-20 nA

Yes

1

BICMOS

5 V

Small Outline

Comparators

6 V

85 °C (185 °F)

580 ns

Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-G5

1

MAX968ESA-T

Maxim Integrated

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

7 mV

50 nA

Yes

2

3 V

Small Outline

Comparators

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

20 µs

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.193 in (4.9 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.