TSSOP Comparators 1,398

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
MAX9013EUA+	Analog Devices	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		5.5 mV	2 uA	Yes	1	BIPOLAR					5 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Matte Tin - annealed	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX9092AUA+	Analog Devices	Comparator	Automotive	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		7 mV	400 nA	Yes	2	BICMOS		300 μA			2.7 V	1.8/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	115 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX962EUA+	Analog Devices	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		4.5 mV	30 uA	Yes	2	CMOS		18 mA			3 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	15 uA	4.5 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX988EXK+T	Analog Devices	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	7 mV	10 nA	Yes	1			96 μA	0 V		2.7 V	±1.5/±2.5/3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	10 nA	210 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e3	30 s	260 °C (500 °F)	0.079 in (2 mm)
MAX976EUA+	Analog Devices	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		3 mV	300 nA	Yes	2	CMOS		650 μA			5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	300 nA	28 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX989EUA+T	Analog Devices	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	0 V	7 mV	10 nA	Yes	2	CMOS		48 μA	0 V		5 V	±1.5/±2.5/3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	10 nA	300 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX9600EUP+T	Analog Devices	Comparator	Industrial	Gull Wing	20	TSSOP	Rectangular	Plastic/Epoxy	-6 V	9 mV	20 uA	Yes	2	BIPOLAR			-5.2 V		5 V		Small Outline, Thin Profile, Shrink Pitch			6 V	0.026 in (0.65 mm)	85 °C (185 °F)			Open-Emitter	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G20	1	0.043 in (1.1 mm)	0.173 in (4.4 mm)	No	e3	30 s	260 °C (500 °F)	0.256 in (6.5 mm)
MAX9601EUP+T	Analog Devices	Comparator	Industrial	Gull Wing	20	TSSOP	Rectangular	Plastic/Epoxy	-6 V	9 mV	20 uA	Yes	2	BIPOLAR			-5.2 V		5 V		Small Outline, Thin Profile, Shrink Pitch			6 V	0.026 in (0.65 mm)	85 °C (185 °F)			Open-Emitter	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G20	1	0.043 in (1.1 mm)	0.173 in (4.4 mm)	No	e3	30 s	260 °C (500 °F)	0.256 in (6.5 mm)
MAX9094AUD+T	Analog Devices	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		7 mV	400 nA	Yes	4	BICMOS		500 μA			2.7 V	1.8/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	115 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G14	1	0.043 in (1.1 mm)	0.173 in (4.4 mm)	No	e3	30 s	260 °C (500 °F)	0.197 in (5 mm)
MAX923CUA+	Analog Devices	Comparator	Commercial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	-0.3 V	10 mV		Yes	2	CMOS		6 μA			3 V	±1.25/±5.5/2.5/11 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	12 V	0.026 in (0.65 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)	Matte Tin - annealed	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX942AUA+	Analog Devices	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		5.5 mV	400 nA	Yes	2	BIPOLAR		600 μA			3 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	400 nA	80 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX941AUA-T	Analog Devices	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		5.5 mV	400 nA	Yes	1	BIPOLAR		700 μA			3 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	400 nA	80 ns		-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0			0.118 in (3 mm)
MAX994EUD+T	Analog Devices	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy	0 V	7 mV	10 nA	Yes	4			24 μA	0 V		5 V	±1.5/±2.5/3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	10 nA	450 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G14	1	0.043 in (1.1 mm)	0.173 in (4.4 mm)	No	e3	30 s	260 °C (500 °F)	0.197 in (5 mm)
MAX9042BEUA+T	Analog Devices	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		9 mV	25 nA	Yes	2	BIPOLAR		130 μA			5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	25 nA	400 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX992EUA+T	Analog Devices	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	0 V	7 mV	10 nA	Yes	2	CMOS		192 μA	0 V		2.7 V	±1.5/±2.5/3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	10 nA	210 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX9202EUD+	Analog Devices	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy	-6 V	7.5 mV	7 uA	Yes	2	BIPOLAR			-5 V		5 V	±5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	5 uA	7 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G14	1	0.043 in (1.1 mm)	0.173 in (4.4 mm)	No	e3	30 s	260 °C (500 °F)	0.197 in (5 mm)
MAX9093AUA+T	Analog Devices	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		9 mV		Yes	2	BICMOS		300 μA				1.8/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators		0.025 in (0.635 mm)	125 °C (257 °F)	250 nA	120 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1			No	e3	30 s	260 °C (500 °F)
MAX921CUA+	Analog Devices	Comparator	Commercial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	-0.3 V	10 mV		Yes	1	CMOS		4 μA			3 V	±1.25/±5.5/2.5/11 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	12 V	0.026 in (0.65 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)	Matte Tin - annealed	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX9021AXK+T	Analog Devices	Comparator	Automotive	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	8 mV	80 nA	Yes	1			5 μA	0 V		5 V	±1.25/±2.75/2.5/5.5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	80 nA	8 µs		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e3	30 s	260 °C (500 °F)	0.079 in (2 mm)
MAX966EUA+	Analog Devices	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		15 mV	50 nA	Yes	2	CMOS		10 μA			3 V	1.5/5.5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	50 nA	20 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX985EXK+	Analog Devices	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		7 mV	10 nA	Yes	1						5 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)		450 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)		e3	30 s	260 °C (500 °F)	0.079 in (2 mm)
MAX965EUA+T	Analog Devices	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		15 mV	50 nA	Yes	1	CMOS		12 μA			3 V	1.5/5.5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	50 nA	20 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX9030AXT+	Analog Devices	Comparator	Automotive	Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy		5 mV		Yes				55 μA				3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08	Comparators		0.025 in (0.635 mm)	125 °C (257 °F)	80 nA			-40 °C (-40 °F)	Nickel Gold Palladium	Dual	R-PDSO-G6	1			No		30 s	260 °C (500 °F)
MAX9017AEKA+	Analog Devices	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		10 mV	2 nA	Yes	2	BICMOS		2.8 μA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.1	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	1 nA	28 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
MAX9017AEKA/V+	Analog Devices	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		10 mV	2 nA	Yes	2	BICMOS	AEC-Q100	2.8 μA			5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.1	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	1 nA	28 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)		e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
MAX9021AXK+	Analog Devices	Comparator	Automotive	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	8 mV	80 nA	Yes	1			5 μA	0 V		5 V	±1.25/±2.75/2.5/5.5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	80 nA	8 µs		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e3	30 s	260 °C (500 °F)	0.079 in (2 mm)
MAX9042BEUA+	Analog Devices	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		9 mV	25 nA	Yes	2	BIPOLAR		130 μA			5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	25 nA	400 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX9052BEUA+	Analog Devices	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		9 mV	25 nA	Yes	2	BIPOLAR		130 μA			5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	25 nA	400 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX9602EUG+	Analog Devices	Comparator	Industrial	Gull Wing	24	TSSOP	Rectangular	Plastic/Epoxy	-6 V	9 mV	20 uA	Yes	4	BIPOLAR			-5.2 V		5 V		Small Outline, Thin Profile, Shrink Pitch			6 V	0.026 in (0.65 mm)	85 °C (185 °F)			Open-Emitter	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G24	1	0.043 in (1.1 mm)	0.173 in (4.4 mm)	No	e3	30 s	260 °C (500 °F)	0.307 in (7.8 mm)
MAX9602EUG+T	Analog Devices	Comparator	Industrial	Gull Wing	24	TSSOP	Rectangular	Plastic/Epoxy	-6 V	9 mV	20 uA	Yes	4	BIPOLAR			-5.2 V		5 V		Small Outline, Thin Profile, Shrink Pitch			6 V	0.026 in (0.65 mm)	85 °C (185 °F)			Open-Emitter	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G24	1	0.043 in (1.1 mm)	0.173 in (4.4 mm)	No	e3	30 s	260 °C (500 °F)	0.307 in (7.8 mm)
MAX9043AEUB+T	Analog Devices	Comparator	Industrial	Gull Wing	10	TSSOP	Square	Plastic/Epoxy		7 mV	10 nA	Yes	2	BIPOLAR		85 μA			5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP10,.19,20	Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)	10 nA	400 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	S-PDSO-G10	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX9647AXK+	Analog Devices	Comparator	Automotive	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		9 mV		Yes	1	BICMOS		170 μA				1.8/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators		0.025 in (0.635 mm)	125 °C (257 °F)	250 nA	120 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1			No	e3	30 s	260 °C (500 °F)
MAX9043BEUB+	Analog Devices	Comparator	Industrial	Gull Wing	10	TSSOP	Square	Plastic/Epoxy		9 mV	25 nA	Yes	2	BIPOLAR		130 μA			5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP10,.19,20	Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)	25 nA	400 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	S-PDSO-G10	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX993EUD+T	Analog Devices	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy	0 V	7 mV	10 nA	Yes	4			24 μA	0 V		5 V	±1.5/±2.5/3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	10 nA	450 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G14	1	0.043 in (1.1 mm)	0.173 in (4.4 mm)	No	e3	30 s	260 °C (500 °F)	0.197 in (5 mm)
MAX9077EUA+T	Analog Devices	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		8 mV	-20 nA	Yes	2			6.6 μA			5 V	2.1/5.5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	20 nA	580 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX9108EUD+T	Analog Devices	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		4 mV	350 nA	Yes	4	BIPOLAR		700 μA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	350 nA			-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G14	1	0.043 in (1.1 mm)	0.173 in (4.4 mm)	No	e3	30 s	260 °C (500 °F)	0.197 in (5 mm)
ADCMP350AKS	Analog Devices	Comparator	Automotive	Gull Wing	4	TSSOP	Rectangular	Plastic/Epoxy				Yes	1			15 μA			3.3 V	2.5/3.3 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP4/6,.08	Comparators	6 V	0.025 in (0.635 mm)	125 °C (257 °F)			Open-Drain	-40 °C (-40 °F)	Tin Lead Over Silver	Dual	R-PDSO-G4		0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e0	30 s	240 °C (464 °F)	0.079 in (2 mm)
AD8598ARU	Analog Devices	Comparator	Industrial	Gull Wing	16	TSSOP	Rectangular	Plastic/Epoxy	-7 V	8 mV		Yes	2	BIPOLAR		15 mA	-5 V		5 V	3/5/±5 V	Small Outline	TSSOP16,.25	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)	6 uA	7 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G16		0.043 in (1.1 mm)	0.173 in (4.4 mm)	No	e0			0.197 in (5 mm)
CMP401GRU	Analog Devices	Comparator	Automotive	Gull Wing	16	TSSOP	Rectangular	Plastic/Epoxy	-8 V	4 mV	4 uA	Yes	4	BICMOS			-5 V		5 V	3/5/±5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP16,.25	Comparators	8 V	0.026 in (0.65 mm)	125 °C (257 °F)	3 uA	33 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G16		0.043 in (1.1 mm)	0.173 in (4.4 mm)	No	e0			0.197 in (5 mm)
ADCMP370AKSZ-REEL7	Analog Devices	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		9 mV	50 nA	Yes	1			7 μA		Tape And Reel, 7 Inch		2.5/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)		5 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e3		260 °C (500 °F)	0.079 in (2 mm)
LTC1440IMS8#PBF	Analog Devices	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	-0.3 V	10 mV		Yes	1	CMOS			0 V		3 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	12 V	0.026 in (0.65 mm)	85 °C (185 °F)		14 µs		-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
ADCMP609BRMZ-REEL7	Analog Devices	Comparator	Automotive	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		5 mV	400 nA	Yes	1			1.1 mA		Tape And Reel, 7 Inch	2.5 V	2.5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	400 nA			-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3		260 °C (500 °F)	0.118 in (3 mm)
LT1713CMS8#TRPBF	Analog Devices	Comparator	Commercial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	-6.3 V	4 mV	5 uA	Yes	1				-5 V	Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	6.3 V	0.026 in (0.65 mm)	70 °C (158 °F)		8.5 ns		0 °C (32 °F)	Matte Tin	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
AD8564ARU-REEL	Analog Devices	Comparator	Automotive	Gull Wing	16	TSSOP	Rectangular	Plastic/Epoxy	-7 V	10 mV	9 uA	Yes	4			15.6 mA	-5 V	Tape And Reel	5 V	5,5/10,GND/-5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP16,.25	Comparators	7 V	0.026 in (0.65 mm)	125 °C (257 °F)	400 nA	8 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G16	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e0		240 °C (464 °F)	0.197 in (5 mm)
ADCMP354AKS-RL	Analog Devices	Comparator	Automotive	Gull Wing	4	TSSOP	Rectangular	Plastic/Epoxy				Yes	1	CMOS		20 μA		Tape And Reel		2.5/3.3 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP4/6,.08	Comparators		0.025 in (0.635 mm)	125 °C (257 °F)				-40 °C (-40 °F)		Dual	R-PDSO-G4				No
ADCMP356AKS	Analog Devices	Comparator	Automotive	Gull Wing	4	TSSOP	Rectangular	Plastic/Epoxy				Yes	1			15 μA			3.3 V	2.5/3.3 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP4/6,.08	Comparators	6 V	0.025 in (0.635 mm)	125 °C (257 °F)			Push-Pull	-40 °C (-40 °F)	Tin Lead Over Silver	Dual	R-PDSO-G4		0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e0	30 s	240 °C (464 °F)	0.079 in (2 mm)
ADCMP352AKS	Analog Devices	Comparator	Automotive	Gull Wing	4	TSSOP	Rectangular	Plastic/Epoxy				Yes	1			15 μA			3.3 V	2.5/3.3 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP4/6,.08	Comparators	6 V	0.025 in (0.635 mm)	125 °C (257 °F)			Push-Pull	-40 °C (-40 °F)	Tin Lead Over Silver	Dual	R-PDSO-G4		0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e0	30 s	240 °C (464 °F)	0.079 in (2 mm)
LTC1540IMS8	Analog Devices	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	0 V	16 mV		Yes	1				0 V		3 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	12 V	0.026 in (0.65 mm)	85 °C (185 °F)		70 µs		-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0			0.118 in (3 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.