TSSOP Comparators 1,398

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Nominal Bandwidth (3dB)	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
INA204AIPWT	Texas Instruments	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		3.5 mV		Yes	2			2.8 mA			12 V	12 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators		0.026 in (0.65 mm)	125 °C (257 °F)	16 uA	1.3 µs		-40 °C (-40 °F)		Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	4.4 MHz				0.197 in (5 mm)
LPV7215MG	Texas Instruments	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	2.9 mV		Yes	1	BICMOS		1.2 μA	0 V		2.7 V	2/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)		15 µs	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No		e0		260 °C (500 °F)	0.079 in (2 mm)
TLV3494AIPWT	Texas Instruments	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		15 mV	10 pA	Yes	4	CMOS		4.8 μA		Tape And Reel	5 V	2/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	5.5 V	0.026 in (0.65 mm)	125 °C (257 °F)	10 pA	12 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	2	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		e4		260 °C (500 °F)	0.197 in (5 mm)
TLC3702QPWRQ1	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		5 mV	30 nA	Yes	2	CMOS	AEC-Q100	40 μA		Tape And Reel	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	125 °C (257 °F)	30 pA	4.5 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	3	0.047 in (1.2 mm)	0.118 in (3 mm)	No		e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
LMV7239QM7X/NOPB	Texas Instruments	Comparator	Automotive	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		8 mV	600 nA	Yes	1	BIPOLAR	AEC-Q100	95 μA		Tape And Reel	5 V	2.7/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	400 nA	75 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No		e3		260 °C (500 °F)	0.079 in (2 mm)
LMV762QMM	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		1 mV	50 pA	Yes	2						5 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	5.5 V	0.026 in (0.65 mm)	125 °C (257 °F)		225 ns	Push-Pull	-40 °C (-40 °F)		Dual	S-PDSO-G8		0.043 in (1.09 mm)	0.118 in (3 mm)	No					0.118 in (3 mm)
LMP7300MMX/NOPB	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		750 uV	3 nA	Yes	1			16 μA		Tape And Reel		2.7/12 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators		0.026 in (0.65 mm)	125 °C (257 °F)	3 nA	7.7 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.042 in (1.07 mm)	0.118 in (3 mm)	No		e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
TLC3704CPWG4	Texas Instruments	Comparator	Commercial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy	-18 V	6.5 mV	600 pA	Yes	4	CMOS		100 μA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)		2.7 µs	Push-Pull	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
TLC339CPWG4	Texas Instruments	Comparator	Commercial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		6.5 mV	600 pA	Yes	4	CMOS		80 μA		Tube	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)	2 pA	2.5 µs	Open-Drain	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		e4		260 °C (500 °F)	0.197 in (5 mm)
LMV393QPWR	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		9 mV	400 nA	Yes	2	BIPOLAR		140 μA			5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	5.5 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	450 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)	No					0.173 in (4.4 mm)
LMV393QDGKR	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		9 mV	400 nA	Yes	2	BIPOLAR		140 μA			5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	5.5 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	450 ns	Open-Collector	-40 °C (-40 °F)		Dual	S-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)	No					0.118 in (3 mm)
TLV2393IPW-00LE	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		9 mV	-400 nA	Yes	2	BIPOLAR					3 V		Small Outline, Thin Profile, Shrink Pitch			7 V	0.026 in (0.65 mm)	105 °C (221 °F)		450 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)	No					0.173 in (4.4 mm)
LMH7220MGX/NOPB	Texas Instruments	Comparator	Industrial	Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy		9.5 mV		Yes	1			14 mA				2.7/5/12 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08	Comparators		0.026 in (0.65 mm)	85 °C (185 °F)	500 nA			-40 °C (-40 °F)		Dual	R-PDSO-G6		0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	1.25 MHz				0.079 in (2 mm)
TLC352IPWG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy	0 V	7 mV	2 nA	Yes	2	CMOS		300 μA	0 V	Tube	5 V	1.5/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	85 °C (185 °F)	20 nA	650 ns	Open-Drain	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No		e4		260 °C (500 °F)	0.173 in (4.4 mm)
LMV339MT	Texas Instruments	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		7 mV	250 nA	Yes	4	BICMOS		300 μA	0 V	Tube	2.7 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	250 nA	450 ns	Open-Collector	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		e0	40	260 °C (500 °F)	0.197 in (5 mm)
TL3016IPW	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy	-7 V	3 mV	10 uA	Yes	1	BIPOLAR		12.5 mA	-5 V	Tube	5 V	±5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)	10 uA	7.8 µs		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No		e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
TLC374CPWG4	Texas Instruments	Comparator	Commercial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		6.5 mV	600 pA	Yes	4	CMOS		800 μA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)	600 pA	650 ns	Open-Drain	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
TLV2354IPW	Texas Instruments	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		5 mV	2 nA	Yes	4	CMOS		600 μA		Tube	3 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	8 V	0.026 in (0.65 mm)	85 °C (185 °F)	2 nA	640 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
LMV393PWR	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		7 mV		Yes	2	CMOS		250 μA				2.7/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators		0.025 in (0.635 mm)	85 °C (185 °F)	250 nA	1 µs		-40 °C (-40 °F)		Dual	R-PDSO-G8				No
TLV3702CDGKR	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	0 V	7 mV	1.5 nA	Yes	2	CMOS		1.6 μA	0 V	Tape And Reel	2.7 V	±1.25/±8/2.5/16 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	17 V	0.026 in (0.65 mm)	70 °C (158 °F)	100 pA	240 µs	Push-Pull	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No		e4		260 °C (500 °F)	0.118 in (3 mm)
TL3116IPWR	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy	-7 V	3 mV	1.5 uA	Yes	1	BIPOLAR		14.7 mA	-5 V	Tape And Reel	5 V	5/±5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)	1.1 uA	9.9 ns		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No		e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
INA209AIPWG4	Texas Instruments	Comparator	Automotive	Gull Wing	16	TSSOP	Rectangular	Plastic/Epoxy		200 uV		Yes	1					Tube	3.3 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	5.5 V	0.026 in (0.65 mm)	125 °C (257 °F)			Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G16	2	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
LMP7300MM	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		2.2 mV	4 nA	Yes	1						5 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	13.6 V	0.026 in (0.65 mm)	125 °C (257 °F)		12 µs	Open-Collector	-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G8	1	0.043 in (1.09 mm)	0.118 in (3 mm)	No		e0	40	260 °C (500 °F)	0.118 in (3 mm)
TL393IPWLE	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		9 mV	-400 nA	Yes	2	BIPOLAR		1.2 mA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	7 V	0.026 in (0.65 mm)	105 °C (221 °F)	250 nA	650 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)	No					0.173 in (4.4 mm)
TL3016CPWLE	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy	-7 V	3.5 mV	10 uA	Yes	1	BIPOLAR		12.5 mA	-5 V		5 V	5/±5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	7 V	0.026 in (0.65 mm)	70 °C (158 °F)	7.5 uA	7.8 µs		0 °C (32 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)	No					0.173 in (4.4 mm)
TLC354CPW	Texas Instruments	Comparator	Commercial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		5 mV	600 pA	Yes	4	CMOS		600 μA		Tube	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)	20 nA	650 ns	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
TLV7211IDCKR	Texas Instruments	Comparator	Industrial	Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy	0 V	18 mV	0.04 pA	Yes	1	CMOS		14 μA	0 V	Tape And Reel	5 V	3/15 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08	Comparators	16 V	0.026 in (0.65 mm)	85 °C (185 °F)	0.04 pA	10 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G6	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No		e4		260 °C (500 °F)	0.079 in (2 mm)
PTLV3604DCKT	Texas Instruments	Comparator	Automotive	Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy		5 mV	5 uA	Yes	1			17.5 mA			2.5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08		5.5 V	0.026 in (0.65 mm)	125 °C (257 °F)	5 uA	0.8 ns		-40 °C (-40 °F)		Dual	R-PDSO-G6		0.043 in (1.1 mm)	0.049 in (1.25 mm)						0.079 in (2 mm)
TLC3704QPWRQ1	Texas Instruments	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		7 mV		Yes	4	CMOS	AEC-Q100	175 μA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	125 °C (257 °F)		1.1 µs	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No					0.197 in (5 mm)
V62/18613-01XE-T	Texas Instruments	Comparator	Military	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		2.5 mV	20 nA	Yes	4	BIPOLAR							Small Outline, Thin Profile, Shrink Pitch		Comparators	40 V	0.026 in (0.65 mm)	125 °C (257 °F)	15 nA	560 ns	Open-Collector	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	2	0.047 in (1.2 mm)	0.173 in (4.4 mm)			e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
TLV3402QDGK	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	0 V	4.4 mV	1.5 nA	Yes	1				0 V		2.7 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	17 V	0.026 in (0.65 mm)	125 °C (257 °F)			Open-Drain	-40 °C (-40 °F)		Dual	S-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)	No					0.118 in (3 mm)
LP311PWLE	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy	-18 V	10 mV	150 nA	Yes	1	BIPOLAR		300 μA	-15 V		15 V	±15 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)	100 nA	1.2 µs	Open-Collector, Open-Emitter	0 °C (32 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)	No					0.173 in (4.4 mm)
LMV339QPWRQ1	Texas Instruments	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		9 mV	400 nA	Yes	2	BIPOLAR	AEC-Q100	350 μA			5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	450 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No					0.197 in (5 mm)
LMV331QDCKRQ1	Texas Instruments	Comparator	Automotive	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		9 mV	400 nA	Yes	2	BIPOLAR	AEC-Q100	150 μA			5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	450 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.049 in (1.25 mm)	No					0.079 in (2 mm)
TLV1393IPWR	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		9 mV	-400 nA	Yes	2	BIPOLAR					3 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	7 V	0.026 in (0.65 mm)	105 °C (221 °F)	250 nA	700 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)	No					0.173 in (4.4 mm)
PM2903BQDDFRQ1	Texas Instruments	Comparator		Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		4 mV	50 nA	Yes	2		AEC-Q100	800 μA		Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.11	Comparators	38 V	0.026 in (0.65 mm)	125 °C (257 °F)	25 nA	1 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.043 in (1.1 mm)	0.063 in (1.6 mm)						0.114 in (2.9 mm)
TLC372CPWG4	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		6.5 mV	600 pA	Yes	2	CMOS		400 μA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)		650 ns	Open-Drain	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No		e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
TLV3404IPWG4	Texas Instruments	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy	0 V	4.4 mV	1.5 nA	Yes	4			950 nA	0 V		5 V	±1.35/±8/2.7/16 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	17 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 pA	175 µs	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
TLV3604DCKT	Texas Instruments	Comparator	Automotive	Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy		5 mV	5 uA	Yes	1			17.5 mA			2.5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08		5.5 V	0.026 in (0.65 mm)	125 °C (257 °F)	5 uA	0.8 ns		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G6	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)			e4	30 s	260 °C (500 °F)	0.079 in (2 mm)
TL3016IPWLE	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy	-7 V	3.5 mV	10 uA	Yes	1	BIPOLAR		12.5 mA	-5 V		5 V	5/±5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)	7.5 uA	7.8 µs		-40 °C (-40 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)	No					0.173 in (4.4 mm)
SM72375MMX/NOPB	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		13 mV		Yes	2	CMOS		25 μA			2.7 V	2.7/15 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	16 V	0.026 in (0.65 mm)	125 °C (257 °F)		10 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No		e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
TLV7032DGKT	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		8 mV		Yes	1						5 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	7 V	0.026 in (0.65 mm)	125 °C (257 °F)		3 µs	Push-Pull	-40 °C (-40 °F)		Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)				30 s	260 °C (500 °F)	0.118 in (3 mm)
PLM2903BIPWR	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		4 mV	25 nA	Yes	2			2.5 mA		Tape And Reel	5 V		Small Outline, Low Profile, Shrink Pitch	TSSOP8,.25	Comparators	38 V	0.026 in (0.65 mm)	125 °C (257 °F)	25 nA	1 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)						0.173 in (4.4 mm)
TLC3702CPWLE	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		6.5 mV	600 pA	Yes	2	CMOS		50 μA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)		2.7 µs	Push-Pull	0 °C (32 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)	No					0.173 in (4.4 mm)
TLC339IPW	Texas Instruments	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		7 mV	2 nA	Yes	4	CMOS		80 μA		Tube	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	85 °C (185 °F)	2 pA	2.5 µs	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		e4		260 °C (500 °F)	0.197 in (5 mm)
TLC352CPWRG4	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy	0 V	6.5 mV	600 pA	Yes	2	CMOS		400 μA	0 V		5 V	1.5/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)		650 ns	Open-Drain	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No		e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
LMV7239QM7	Texas Instruments	Comparator	Automotive	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	8 mV	600 nA	Yes	1	BIPOLAR			0 V		2.7 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)			Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.049 in (1.25 mm)						0.079 in (2 mm)
TLV3601QDCKRQ1	Texas Instruments	Comparator		Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		5 mV	5 uA	Yes	1		AEC-Q100	7 mA		Tape And Reel	2.5 V		Small Outline, Thin Profile, Shrink Pitch	TSOP5/6,.08		6 V	0.026 in (0.65 mm)	125 °C (257 °F)	5 uA	2.5 ns	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)			e4		260 °C (500 °F)	0.079 in (2 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.