TSSOP Comparators 1,398

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Nominal Unity Gain Bandwidth	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Minimum Common Mode Reject Ratio	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Maximum Common Mode Voltage	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
MAX9144EUD+	Analog Devices	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy			4.5 mV	320 nA	Yes	4		BIPOLAR		300 μA			5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	320 nA				-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G14	1	0.043 in (1.1 mm)	0.173 in (4.4 mm)	No	e3	30 s	260 °C (500 °F)	0.197 in (5 mm)
NCS2202SN1T1G	Onsemi	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		0 V	8 mV	10 nA	Yes	1		CMOS		17 μA	0 V	Tape And Reel	3 V	1/5 V	Small Outline, Thin Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	105 °C (221 °F)			1.1 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.059 in (1.5 mm)	No	e3	40	260 °C (500 °F)	0.118 in (3 mm)
NCV2901DTBR2G	Onsemi	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy			15 mV	500 nA	Yes	4		BIPOLAR	AEC-Q100	2.5 mA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	36 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA		1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
TLC393CPWRG4	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy			5 mV	600 pA	Yes	2		CMOS		40 μA		Tape And Reel	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)	2 pA		2.5 µs	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
TLV3702IDGKG4	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		0 V	7 mV	1.5 nA	Yes	2		CMOS		1.6 μA	0 V	Tube	5 V	±1.35/±8/2.7/16 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	17 V	0.026 in (0.65 mm)	125 °C (257 °F)	100 pA		240 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e4		260 °C (500 °F)	0.118 in (3 mm)
TLV9034QDYYRQ1	Texas Instruments	Comparator		Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy			2 mV		Yes	4			AEC-Q100	140 μA		Tape And Reel, 13 Inch	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.12,20		6 V	0.02 in (0.5 mm)	125 °C (257 °F)			115 ns	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.043 in (1.1 mm)	0.079 in (2 mm)				260 °C (500 °F)	0.165 in (4.2 mm)
ADCMP606BKSZ-R2	Analog Devices	Comparator	Automotive	Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy			5 mV	5 uA	Yes	1		BIPOLAR		26 mA			2.5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	5 uA		2.1 ns		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G6	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e4		260 °C (500 °F)	0.079 in (2 mm)
ADCMP606BKSZ-REEL7	Analog Devices	Comparator	Automotive	Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy			5 mV	5 uA	Yes	1		BIPOLAR		26 mA		Tape And Reel, 7 Inch	2.5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	5 uA		2.1 ns		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G6	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e4		260 °C (500 °F)	0.079 in (2 mm)
ADCMP606BKSZ-RL	Analog Devices	Comparator	Automotive	Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy			5 mV	5 uA	Yes	1		BIPOLAR		26 mA		Tape And Reel	2.5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	5 uA		2.1 ns		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G6	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e4		260 °C (500 °F)	0.079 in (2 mm)
INA209AIPWR	Texas Instruments	Comparator	Automotive	Gull Wing	16	TSSOP	Rectangular	Plastic/Epoxy	5.5 kHz		100 uV		Yes	1	120 dB			1.5 mA		Tape And Reel	3.3 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	5.5 V	0.026 in (0.65 mm)	125 °C (257 °F)		26 V		Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G16	2	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
LMV7275MG/NOPB	Texas Instruments	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		0 V	4 mV	100 nA	Yes	1		BICMOS		14 μA	0 V	Tape And Reel	1.8 V	1.8/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	100 nA		1.8 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e3		260 °C (500 °F)	0.079 in (2 mm)
LT1711CMS8#TRPBF	Analog Devices	Comparator	Commercial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		-6.3 V	6 mV	10 uA	Yes	1					-5 V	Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	6.3 V	0.026 in (0.65 mm)	70 °C (158 °F)			5.5 ns		0 °C (32 °F)	Matte Tin	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX975EUA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy			3 mV	-400 nA	Yes	1		CMOS		6 μA			5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	400 nA		28 ns		-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0			0.118 in (3 mm)
MAX975EUA+T	Analog Devices	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy			3 mV	-400 nA	Yes	1		CMOS		6 μA			5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	400 nA		28 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX985EXK-T	Maxim Integrated	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		0 V	7 mV	10 nA	Yes	1				24 μA	0 V		5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	10 nA			Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e0			0.079 in (2 mm)
MAX985EXK+T	Analog Devices	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		0 V	7 mV	10 nA	Yes	1				24 μA	0 V		5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	10 nA		450 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e3	30 s	260 °C (500 °F)	0.079 in (2 mm)
TLC374CPWR	Texas Instruments	Comparator	Commercial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy			6.5 mV	600 pA	Yes	4		CMOS		600 μA		Tape And Reel	5 V	5/10 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)	30 pA		650 ns	Open-Collector	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4		260 °C (500 °F)	0.197 in (5 mm)
TLV1704AMPWTPSEP	Texas Instruments	Comparator	Military	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy			2.5 mV	20 nA	Yes	4		BIPOLAR							Small Outline, Thin Profile, Shrink Pitch		Comparators	40 V	0.026 in (0.65 mm)	125 °C (257 °F)	15 nA		560 ns	Open-Collector	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	2	0.047 in (1.2 mm)	0.173 in (4.4 mm)		e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
TLV3603DCKR	Texas Instruments	Comparator		Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy			5 mV	5 uA	Yes	1				7.8 mA		Tape And Reel	2.5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08		6 V	0.026 in (0.65 mm)	125 °C (257 °F)	5 uA		2.5 ns	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G6	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)		e4		260 °C (500 °F)	0.079 in (2 mm)
TLV3603DCKR-ET	Texas Instruments	Comparator		Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy			10 mV	5 uA	Yes	1				7.8 mA		Tape And Reel	2.5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08		6 V	0.026 in (0.65 mm)	125 °C (257 °F)	5 uA			Push-Pull	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G6	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)		e4		260 °C (500 °F)	0.079 in (2 mm)
TS882IST	STMicroelectronics	Comparator	Automotive	Gull Wing	8	TSSOP	Square	Plastic/Epoxy			6 mV	99 pA	Yes	2				1 μA		Tape And Reel	1.2 V	1.2/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	10 pA		5.5 µs	Push-Pull	-40 °C (-40 °F)		Dual	S-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)	No				0.118 in (3 mm)
ADCMP604BKSZ-REEL7	Analog Devices	Comparator	Automotive	Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy			5 mV	5 uA	Yes	1				21 mA		Tape And Reel, 7 Inch	2.5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	5 uA		3 ns		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G6	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e4		260 °C (500 °F)	0.079 in (2 mm)
ADCMP608BKSZ-RL	Analog Devices	Comparator	Automotive	Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy			5 mV	400 nA	Yes	1		CMOS		1.3 mA		Tape And Reel	2.5 V	2.5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	400 nA		60 ns	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G6	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e4		260 °C (500 °F)	0.079 in (2 mm)
LM393PWE4	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy			9 mV	-400 nA	Yes	2		BIPOLAR		2.5 mA			5 V	5/30 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	36 V	0.026 in (0.65 mm)	70 °C (158 °F)	250 nA		1.3 µs	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
LMV7239M5	Texas Instruments	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		0 V	8 mV	600 nA	Yes	1		BIPOLAR		95 μA	0 V	Tape And Reel	2.7 V	2.7/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.038 in (0.953 mm)	85 °C (185 °F)	400 nA		68 ns	Push-Pull	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G5	1	0.047 in (1.19 mm)	0.063 in (1.6 mm)	No	e0		260 °C (500 °F)	0.115 in (2.92 mm)
LMV7271MG/NOPB	Texas Instruments	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		0 V	4 mV	100 nA	Yes	1		BICMOS		14 μA	0 V	Tape And Reel	1.8 V	1.8/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	100 nA		1.8 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e3		260 °C (500 °F)	0.079 in (2 mm)
MAX9018BEKA+	Analog Devices	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy			10 mV	2 nA	Yes	2		BICMOS		2.8 μA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.1	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	1 nA		31 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
MAX9118EXK	Maxim Integrated	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy			10 mV	2 nA	Yes	1							5 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)			45 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)		e0			0.079 in (2 mm)
MAX9118EXK+	Analog Devices	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy			10 mV	2 nA	Yes	1							5 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)			45 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)		e3	30 s	260 °C (500 °F)	0.079 in (2 mm)
MCP6542T-E/MSV02	Microchip Technology	Comparator		Gull Wing	8	TSSOP	Square	Plastic/Epoxy			7 mV	5 nA	Yes	2		CMOS		20 μA		Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	7 V	0.026 in (0.65 mm)	125 °C (257 °F)			4 µs	Push-Pull	-40 °C (-40 °F)		Dual	S-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)					0.118 in (3 mm)
NCS2201SN1T1G	Onsemi	Comparator	Industrial	Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy			8 mV	10 nA	Yes	1		CMOS		17 μA			3 V	1/5 V	Small Outline, Thin Profile, Shrink Pitch	TSOP6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	105 °C (221 °F)			1.1 µs		-40 °C (-40 °F)	Tin	Dual	R-PDSO-G6	1	0.043 in (1.1 mm)	0.059 in (1.5 mm)	No	e3		260 °C (500 °F)	0.118 in (3 mm)
PTLV7034PWR	Texas Instruments	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy			8 mV	2 pA	Yes	4				3 μA		Tape And Reel	1.8 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	7 V	0.026 in (0.65 mm)	125 °C (257 °F)			3 µs	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)					0.197 in (5 mm)
TA75W393FU(TE12L)	Toshiba	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy			5 mV		Yes	2		BIPOLAR		2 mA				±1/±18/2/36 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.16	Comparators		0.025 in (0.635 mm)	85 °C (185 °F)	250 nA		1.3 µs		-40 °C (-40 °F)		Dual	R-PDSO-G8				No
TA75W393FU(TE12L,F)	Toshiba	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy			5 mV		Yes	2		BIPOLAR		2 mA				±1/±18/2/36 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.16	Comparators		0.025 in (0.635 mm)	85 °C (185 °F)	250 nA		1.3 µs		-40 °C (-40 °F)		Dual	R-PDSO-G8				No
TLV2354IPWLE	Texas Instruments	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy			7 mV	2 nA	Yes	4		CMOS		800 μA			3 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	8 V	0.026 in (0.65 mm)	85 °C (185 °F)	2 nA		640 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No				0.197 in (5 mm)
TLV3704CPW	Texas Instruments	Comparator	Commercial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		0 V	7 mV	1.5 nA	Yes	4		CMOS		3.2 μA	0 V	Tube	2.7 V	±1.25/±8/2.5/16 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	17 V	0.026 in (0.65 mm)	70 °C (158 °F)	100 pA		240 µs	Push-Pull	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4		260 °C (500 °F)	0.197 in (5 mm)
TLV9022DGKR	Texas Instruments	Comparator		Gull Wing	8	TSSOP	Square	Plastic/Epoxy			2 mV		Yes	2				70 μA		Tape And Reel, 13 Inch	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19		6 V	0.026 in (0.65 mm)	125 °C (257 °F)			150 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)		e3		260 °C (500 °F)	0.118 in (3 mm)
TS332IST	STMicroelectronics	Comparator	Automotive	Gull Wing	8	TSSOP	Square	Plastic/Epoxy			6 mV	100 nA	Yes	2				38 μA		Tape And Reel	1.8 V	1.8/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	5.5 V	0.026 in (0.65 mm)	125 °C (257 °F)			420 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
TS3702IPT	STMicroelectronics	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy			6.5 mV	600 pA	Yes	2		CMOS		25 μA		Tape And Reel	3 V	±1.35/±8/2.7/16 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	125 °C (257 °F)			15 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
TS862IPT	STMicroelectronics	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy			18 mV	600 pA	Yes	2		BICMOS		16 μA		Tape And Reel	5 V	2.7/10 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	12 V	0.026 in (0.65 mm)	85 °C (185 °F)	300 pA		2 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4			0.173 in (4.4 mm)
ADCMP601BKSZ-RL	Analog Devices	Comparator	Automotive	Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy			5 mV	5 uA	Yes	1		BIPOLAR				Tape And Reel		3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	5 uA		5 ns	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G6	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e4		260 °C (500 °F)	0.079 in (2 mm)
ADCMP604BKSZ-RL	Analog Devices	Comparator	Automotive	Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy			5 mV	5 uA	Yes	1				21 mA		Tape And Reel	2.5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	5 uA		3 ns		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G6	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e4		260 °C (500 °F)	0.079 in (2 mm)
LM2901VQPWRQ1	Texas Instruments	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy			15 mV	-500 nA	Yes	4		BIPOLAR	AEC-Q100	2.5 mA		Tape And Reel	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	36 V	0.026 in (0.65 mm)	125 °C (257 °F)	-250 nA		1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4		260 °C (500 °F)	0.197 in (5 mm)
LM2903QPWRQ1	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		0 V	7 mV	-500 nA	Yes	2		BIPOLAR	AEC-Q100	1 mA	0 V	Tape And Reel	5 V	5/30 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	36 V	0.026 in (0.65 mm)	125 °C (257 °F)	50 nA		1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
LM2903WYPT	STMicroelectronics	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy			15 mV	400 nA	Yes	2			AEC-Q100			Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	36 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA		1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)					0.173 in (4.4 mm)
LM393PWG4	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy			5 mV	-400 nA	Yes	2		BIPOLAR		1 mA		Tube	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	36 V	0.026 in (0.65 mm)	70 °C (158 °F)	50 nA		1.3 µs	Open-Collector	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4		260 °C (500 °F)	0.173 in (4.4 mm)
LM393PWLE	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy			9 mV	-400 nA	Yes	2		BIPOLAR		2.5 mA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	36 V	0.026 in (0.65 mm)	70 °C (158 °F)	25 nA		1.3 µs	Open-Collector	0 °C (32 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)	No				0.173 in (4.4 mm)
LMC6772AIMM	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		0 V	8 mV	0.4 pA	Yes	2		CMOS		20 μA	0 V	Tape And Reel	5 V	2.7/15 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	16 V	0.026 in (0.65 mm)	85 °C (185 °F)	0.4 pA		4 µs	Open-Collector	-40 °C (-40 °F)	Tin/Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0		260 °C (500 °F)	0.118 in (3 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.