Rectangular Comparators 2,400+

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Minimum Isolation Voltage Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Sub-Category Nominal Slow Rate Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Nominal Response Time Output Type Minimum Operating Temperature Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

LMV762MA

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1 mV

50 pA

Yes

2

AEC-Q100

1.4 mA

Tube

5 V

2.7/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

5 pA

225 ns

Push-Pull

-40 °C (-40 °F)

Tin/Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

235 °C (455 °F)

0.193 in (4.9 mm)

LT6700HS6-2#TRMPBF

Analog Devices

Comparator

Automotive

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

50 nA

Yes

2

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

AP331AWRG-7

Diodes Incorporated

Comparator

Commercial

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

9 mV

500 nA

Yes

1

BIPOLAR

2.5 mA

Tape And Reel, 7 Inch

5 V

±1/±18/2/36 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

40 V

0.037 in (0.95 mm)

70 °C (158 °F)

400 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LM139AWG/883

Texas Instruments

Comparator

Military

Gull Wing

14

SOP

Rectangular

Ceramic, Glass-Sealed

0 V

2 mV

-1 nA

Yes

4

BIPOLAR

MIL-STD-883

2 mA

0 V

5 V

5 V

Small Outline

SOP14,.4

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

100 nA

1 µs

Open-Collector, Open-Drain

-55 °C (-67 °F)

Tin Lead

Dual

R-GDSO-G14

1

0.092 in (2.33 mm)

0.25 in (6.35 mm)

No

e0

0.39 in (9.906 mm)

LM239PWRG4

Texas Instruments

Comparator

Other

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

5 mV

400 nA

Yes

4

BIPOLAR

2 mA

Tape And Reel

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

36 V

0.026 in (0.65 mm)

85 °C (185 °F)

250 nA

1.3 µs

Open-Collector

-25 °C (-13 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

LM339ADE4

Texas Instruments

Comparator

Commercial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

3 mV

400 nA

Yes

4

BIPOLAR

2 mA

Tube

5 V

5 V

Small Outline

SOP14,.24

Comparators

36 V

0.05 in (1.27 mm)

70 °C (158 °F)

250 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

LMC7211AIM5

Texas Instruments

Comparator

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

-8 V

8 mV

0.4 pA

Yes

1

CMOS

12 μA

Tape And Reel

5 V

2.7/15 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

8 V

0.038 in (0.953 mm)

85 °C (185 °F)

0.4 pA

4 µs

Push-Pull

-40 °C (-40 °F)

Tin/Lead

Dual

R-PDSO-G5

1

0.047 in (1.19 mm)

0.063 in (1.6 mm)

No

e0

260 °C (500 °F)

0.115 in (2.92 mm)

LMV762MA/NOPB

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1 mV

50 pA

Yes

2

AEC-Q100

1.4 mA

Tube

2.7 V

2.7/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

5 pA

120 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LT1719CS8#TRMPBF

Analog Devices

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-6 V

3.5 mV

0 uA

Yes

1

BIPOLAR

-5 V

Tape And Reel

5 V

Small Outline

Comparators

6 V

0.05 in (1.27 mm)

70 °C (158 °F)

7 ns

Open-Emitter

0 °C (32 °F)

Matte Tin - annealed

Dual

R-PDSO-G8

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

e3

30 s

260 °C (500 °F)

0.193 in (4.9025 mm)

ADCMP600BKSZ-R2

Analog Devices

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

BIPOLAR

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

5 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

LM161J/883B

National Semiconductor

Comparator

Military

Through-Hole

14

DIP

Rectangular

Ceramic, Glass-Sealed

3 mV

20 uA

No

1

BIPOLAR

38535Q/M;38534H;883B

10 mA

-10 V

10 V

5,±10 V

In-Line

DIP14,.3

Comparators

0.1 in (2.54 mm)

125 °C (257 °F)

20 pA

14 ns

Totem Pole

-55 °C (-67 °F)

Tin/Lead

Dual

R-GDIP-T14

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

e0

0.765 in (19.43 mm)

LM2901VDR2G

Onsemi

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

15 mV

500 nA

Yes

4

BIPOLAR

2.5 mA

5 V

5 V

Small Outline

SOP14,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

LM311N/P3

Texas Instruments

Comparator

Commercial

Through-Hole

14

DIP

Rectangular

Plastic/Epoxy

10 mV

No

BIPOLAR

-15 V

15 V

±15 V

In-Line

DIP14,.3

Comparators

0.1 in (2.54 mm)

70 °C (158 °F)

0 °C (32 °F)

Dual

R-PDIP-T14

AD8561ARU-REEL

Analog Devices

Comparator

Industrial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

-7 V

8 mV

Yes

1

BIPOLAR

-5 V

Tape And Reel

5 V

3/5/±5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

7 V

0.026 in (0.65 mm)

85 °C (185 °F)

7 ns

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

240 °C (464 °F)

0.173 in (4.4 mm)

LM139AJ

Texas Instruments

Comparator

Military

Through-Hole

14

DIP

Rectangular

Ceramic, Glass-Sealed

2 mV

25 nA

No

4

BIPOLAR

2 mA

Tube

5 V

5 V

In-Line

DIP14,.3

Comparators

36 V

0.1 in (2.54 mm)

125 °C (257 °F)

25 nA

1.3 µs

Open-Collector

-55 °C (-67 °F)

Tin Lead

Dual

R-GDIP-T14

0.2 in (5.08 mm)

0.263 in (6.67 mm)

No

e0

0.77 in (19.56 mm)

LMV393M/NOPB

Texas Instruments

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

7 mV

250 nA

Yes

2

BICMOS

100 μA

0 V

Tube

2.7 V

3/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

85 °C (185 °F)

250 nA

450 ns

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

260 °C (500 °F)

0.193 in (4.9 mm)

LT1721IGN

Analog Devices

Comparator

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

4.5 mV

-6 uA

Yes

4

BIPOLAR

5 V

Small Outline, Shrink Pitch

Comparators

7 V

0.025 in (0.635 mm)

85 °C (185 °F)

7 ns

Push-Pull

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G16

0.069 in (1.75 mm)

0.154 in (3.9116 mm)

No

e0

0.193 in (4.9 mm)

TL331VSN4T3G

Onsemi

Comparator

Automotive

Gull Wing

5

TSOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

1

AEC-Q100

1.25 mA

Tape And Reel

5 V

Small Outline, Thin Profile

TSOP5/6,.11,37

Comparators

36 V

0.037 in (0.95 mm)

125 °C (257 °F)

250 nA

850 ns

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.059 in (1.5 mm)

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LM2903VQDRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

7 mV

-500 nA

Yes

2

BIPOLAR

AEC-Q100

1 mA

0 V

Tape And Reel

5 V

5/32 V

Small Outline

SOP8,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

50 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LM393PWRE4

Texas Instruments

Comparator

Commercial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

9 mV

-400 nA

Yes

2

BIPOLAR

2.5 mA

5 V

5/30 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

36 V

0.026 in (0.65 mm)

70 °C (158 °F)

250 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.173 in (4.4 mm)

LT6700HS6-1

Analog Devices

Comparator

Automotive

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

50 nA

Yes

2

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e0

20 s

235 °C (455 °F)

0.114 in (2.9 mm)

MAX912ESE

Maxim Integrated

Comparator

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-7 V

3 mV

8 uA

Yes

2

BIPOLAR

-5 V

5 V

5/±5 V

Small Outline

SOP16,.25

Comparators

7 V

0.05 in (1.27 mm)

85 °C (185 °F)

5 uA

10 ns

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.39 in (9.9 mm)

MAX912ESE+

Analog Devices

Comparator

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-7 V

3 mV

8 uA

Yes

2

BIPOLAR

10 mA

-5 V

5 V

5/±5 V

Small Outline

SOP16,.25

Comparators

7 V

0.05 in (1.27 mm)

85 °C (185 °F)

5 uA

10 ns

-40 °C (-40 °F)

Matte Tin - annealed

Dual

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.39 in (9.9 mm)

TL3016IPWR

Texas Instruments

Comparator

Industrial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

-7 V

3 mV

10 uA

Yes

1

BIPOLAR

12.5 mA

-5 V

Tape And Reel

5 V

±5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

7 V

0.026 in (0.65 mm)

85 °C (185 °F)

10 uA

7.8 µs

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.173 in (4.4 mm)

TLV3492AIDCNTG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

LSSOP

Rectangular

Plastic/Epoxy

15 mV

10 pA

Yes

2

CMOS

1.2 μA

5 V

2/5 V

Small Outline, Low Profile, Shrink Pitch

TSSOP8,.1

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

12 µs

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

TLV7031QDBVRQ1

Texas Instruments

Comparator

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

8 mV

Yes

1

AEC-Q100

900 nA

Tape And Reel

5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

7 V

0.037 in (0.95 mm)

125 °C (257 °F)

2 pA

3 µs

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

e4

260 °C (500 °F)

0.114 in (2.9 mm)

TS881ICT

STMicroelectronics

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

6 mV

100 pA

Yes

1

1.35 μA

Tape And Reel

1.2 V

1.2/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

6 µs

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

30 s

260 °C (500 °F)

0.079 in (2 mm)

LMV331SE-7

Diodes Incorporated

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

1

BICMOS

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

300 ns

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.051 in (1.3 mm)

e3

30 s

260 °C (500 °F)

0.085 in (2.15 mm)

TLC3704IDRG4

Texas Instruments

Comparator

Industrial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

-18 V

7 mV

2 nA

Yes

4

CMOS

125 μA

5 V

5 V

Small Outline

SOP14,.25

Comparators

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

2 nA

2.7 µs

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

TS3021HIYLT

STMicroelectronics

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

7 mV

300 nA

Yes

1

AEC-Q100

Tape And Reel

3.3 V

Small Outline, Low Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

5.5 V

0.037 in (0.95 mm)

150 °C (302 °F)

160 nA

50 ns

Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-G5

0.057 in (1.45 mm)

0.063 in (1.6 mm)

0.114 in (2.9 mm)

AD8561AR-REEL

Analog Devices

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-7 V

8 mV

Yes

1

BIPOLAR

-5 V

Tape And Reel

5 V

3/5/±5 V

Small Outline

SOP8,.45

Comparators

7 V

0.05 in (1.27 mm)

85 °C (185 °F)

7 ns

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

240 °C (464 °F)

0.193 in (4.9 mm)

LM2903VQPWRG4Q1

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

0 V

7 mV

-500 nA

Yes

2

BIPOLAR

AEC-Q100

1 mA

0 V

Tape And Reel

5 V

5/32 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

50 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.173 in (4.4 mm)

LM339PW

Texas Instruments

Comparator

Commercial

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

5 mV

400 nA

Yes

4

BIPOLAR

2 mA

Tube

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

36 V

0.026 in (0.65 mm)

70 °C (158 °F)

250 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

LMC6762BIM/NOPB

Texas Instruments

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

5 mV

1 pA

Yes

2

CMOS

20 μA

0 V

Tube

5 V

2.7/15 V

Small Outline

SOP8,.25

Comparators

16 V

0.05 in (1.27 mm)

85 °C (185 °F)

0.4 pA

4 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LT1011CS8#TRPBF

Analog Devices

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

3 mV

50 nA

Yes

1

BIPOLAR

-15 V

Tape And Reel

15 V

Small Outline

Comparators

18 V

0.05 in (1.27 mm)

70 °C (158 °F)

150 ns

Open-Collector

0 °C (32 °F)

Matte Tin - annealed

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

MCP6561RT-E/OT

Microchip Technology

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

10 mV

5 nA

Yes

1

CMOS

130 μA

Tape And Reel

1.8 V

2/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Comparators

6.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

56 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin - annealed

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.1 in (2.55 mm)

No

e3

40

260 °C (500 °F)

0.114 in (2.9 mm)

TLC3702CPWRG4

Texas Instruments

Comparator

Commercial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

6.5 mV

600 pA

Yes

2

CMOS

50 μA

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

18 V

0.026 in (0.65 mm)

70 °C (158 °F)

2.7 µs

Push-Pull

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.173 in (4.4 mm)

TLC3704IPWR

Texas Instruments

Comparator

Industrial

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

-18 V

7 mV

2 nA

Yes

4

CMOS

80 μA

Tape And Reel

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

30 pA

2.7 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

260 °C (500 °F)

0.197 in (5 mm)

TLV7211IDBVR

Texas Instruments

Comparator

Industrial

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

0 V

18 mV

0.04 pA

Yes

1

CMOS

14 μA

0 V

Tape And Reel

5 V

3/15 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

16 V

0.037 in (0.95 mm)

85 °C (185 °F)

0.04 pA

10 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

LM2901DE4

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

7 mV

500 nA

Yes

4

BIPOLAR

2.5 mA

Tube

5 V

5 V

Small Outline

SOP14,.24

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

LM393LVQDRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

3 mV

Yes

2

AEC-Q100

100 μA

Tape And Reel, 13 Inch

5 V

Small Outline

SOP8,.25

Comparators

6 V

0.05 in (1.27 mm)

125 °C (257 °F)

600 ns

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.153 in (3.895 mm)

e4

30 s

260 °C (500 °F)

0.193 in (4.905 mm)

PTLV3601DCKT

Texas Instruments

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

8 mA

3.3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5,.08

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

2.5 ns

Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-G5

0.043 in (1.1 mm)

0.049 in (1.25 mm)

0.079 in (2 mm)

TLV3601DCKT

Texas Instruments

Comparator

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

7 mA

Tape And Reel

2.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

2.5 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

e4

260 °C (500 °F)

0.079 in (2 mm)

TLV3701IP

Texas Instruments

Comparator

Automotive

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

0 V

7 mV

1.5 nA

No

1

CMOS

800 nA

0 V

Tube

5 V

±1.35/±8/2.7/16 V

In-Line

DIP8,.3

Comparators

17 V

0.1 in (2.54 mm)

125 °C (257 °F)

100 pA

240 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDIP-T8

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

e4

0.386 in (9.81 mm)

TLV9022DR

Texas Instruments

Comparator

Automotive

Gull Wing

8

HSOP

Rectangular

Plastic/Epoxy

2 mV

Yes

2

70 μA

Tape And Reel, 13 Inch

5 V

Small Outline, Heat Sink/Slug

SOP8,.25

Comparators

6 V

0.05 in (1.27 mm)

125 °C (257 °F)

150 ns

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.153 in (3.895 mm)

e4

30 s

260 °C (500 °F)

0.193 in (4.905 mm)

TS3021IYLT

STMicroelectronics

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

7 mV

300 nA

Yes

1

AEC-Q100

135 μA

Tape And Reel

3.3 V

1.8/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

5.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

160 nA

39 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

LM139AJ/883B

Texas Instruments

Comparator

Military

Through-Hole

14

DIP

Rectangular

Ceramic, Glass-Sealed

4 mV

300 nA

No

4

BIPOLAR

MIL-STD-883 Class B

2 mA

5 V

5 V

In-Line

DIP14,.3

Comparators

36 V

0.1 in (2.54 mm)

125 °C (257 °F)

1.3 µs

Open-Collector

-55 °C (-67 °F)

Tin Lead

Dual

R-GDIP-T14

1

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

e0

0.785 in (19.94 mm)

LM2901AVQDRG4Q1

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

4 mV

-500 nA

Yes

4

BIPOLAR

AEC-Q100

2.5 mA

Tape And Reel

5 V

5 V

Small Outline

SOP14,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

-250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.341 in (8.65 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.