Rectangular Comparators 2,400+

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
LM2903VQDR	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		15 mV	-500 nA	Yes	2	BIPOLAR		1 mA		Tape And Reel	5 V	5 V	Small Outline	SOP8,.25	Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	50 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.193 in (4.9 mm)
TLV2393IP	Texas Instruments	Comparator	Industrial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy		9 mV	-400 nA	No	2	BIPOLAR		1.6 mA			3 V	3/5 V	In-Line	DIP8,.3	Comparators	7 V	0.1 in (2.54 mm)	105 °C (221 °F)	250 nA	450 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.386 in (9.81 mm)
LM393JG4	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Ceramic		9 mV		No	2	BIPOLAR					5 V	5 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T8
TLV3701QDRQ1	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		7 mV	2 nA	Yes	1		AEC-Q100				5 V	±1.35/±8/2.7/16 V	Small Outline	SOP8,.25	Comparators	17 V	0.05 in (1.27 mm)	125 °C (257 °F)	250 pA	240 µs	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
TL712CPE4	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy				No	1	BIPOLAR		20 mA			5 V	5 V	In-Line	DIP8,.3	Comparators	7 V	0.1 in (2.54 mm)	70 °C (158 °F)		25 ns	3-State	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDIP-T8	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e4			0.386 in (9.81 mm)
5962-8773901CX	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic, Glass-Sealed	0 V	4 mV	-300 nA	No	4	BIPOLAR	MIL-STD-883	3 mA	0 V		5 V		In-Line		Comparators	36 V	0.1 in (2.54 mm)	125 °C (257 °F)		1.3 µs	Open-Collector	-55 °C (-67 °F)	Tin Lead	Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	Yes	e0			0.77 in (19.56 mm)
LM319JP4	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Ceramic		10 mV		No		BIPOLAR			-15 V		15 V	±15 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T14
TLV3704CDG4	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy	0 V	7 mV	1.5 nA	Yes	4	CMOS		1 μA	0 V		2.7 V	±1.25/±8/2.5/16 V	Small Outline	SOP14,.25	Comparators	17 V	0.05 in (1.27 mm)	70 °C (158 °F)	250 pA	240 µs	Push-Pull	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
TLC139MD	Texas Instruments	Comparator	Military	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		10 mV	30 nA	Yes	4	CMOS		175 μA			5 V		Small Outline			18 V	0.05 in (1.27 mm)	125 °C (257 °F)		2.5 µs	Open-Drain	-55 °C (-67 °F)		Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.341 in (8.65 mm)
TLC354IDG4	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		7 mV	2 nA	Yes	4	CMOS		400 μA			5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	2 nA	650 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
M38510/11201SCX	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic, Metal-Sealed Cofired	-18 V	7 mV	1 nA	No	4						15 V		In-Line		Comparators	18 V		125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-CDIP-T14				No
TLC3702IDG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		7 mV	2 nA	Yes	2	CMOS		40 μA		Tube	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	30 pA	2.7 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.193 in (4.9 mm)
LM139AWG-SMD	Texas Instruments	Comparator	Military	Gull Wing	14	SOP	Rectangular		Ceramic, Glass-Sealed	0 V	2 mV	-1 nA	Yes	4	BIPOLAR	MIL-STD-883	2 mA	0 V		5 V	5 V	Small Outline	SOP14,.4	Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	100 nA	5 µs	Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin Lead	Dual	R-GDSO-G14	1	0.092 in (2.33 mm)	0.25 in (6.35 mm)	No	e0			0.39 in (9.906 mm)
LM339PWG4	Texas Instruments	Comparator	Commercial	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		5 mV	400 nA	Yes	4	BIPOLAR		2 mA		Tube	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	36 V	0.026 in (0.65 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
SN72820N	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy				No		BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T14				No
LM139AWGRLQMLV	Texas Instruments	Comparator	Military	Gull Wing	14	SOP	Rectangular	100k Rad(Si)	Ceramic, Glass-Sealed	0 V	2 mV	-1 nA	Yes	4	BIPOLAR	MIL-PRF-38535 Class V	2 mA	0 V		5 V	5 V	Small Outline	SOP14,.4	Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	100 nA	700 ns	Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin Lead	Dual	R-GDSO-G14	1	0.092 in (2.33 mm)	0.25 in (6.35 mm)	No	e0			0.39 in (9.906 mm)
LP339N/PB	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		9 mV	40 nA	No	4	BIPOLAR					5 V		In-Line		Comparators	36 V	0.1 in (2.54 mm)	70 °C (158 °F)		8 µs	Open-Drain	0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T14	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)		e0			0.755 in (19.18 mm)
LP339NE4	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		9 mV	40 nA	No	4	BIPOLAR		100 μA			5 V	5 V	In-Line	DIP14,.3	Comparators	36 V	0.1 in (2.54 mm)	70 °C (158 °F)	25 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e4			0.76 in (19.305 mm)
LP2901IDRQ1	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		5 mV	-40 nA	Yes	4	BIPOLAR	AEC-Q100	100 μA		Tape And Reel	5 V	5 V	Small Outline	SOP14,.25	Comparators	36 V	0.05 in (1.27 mm)	85 °C (185 °F)	25 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
5962-9555101NXX	Texas Instruments	Comparator	Military	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		10 mV	30 nA	Yes	2	CMOS	MIL-PRF-38535 Class N	90 μA			5 V		Small Outline		Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)				-55 °C (-67 °F)	Palladium	Dual	R-PDSO-G8		0.077 in (1.96 mm)	0.154 in (3.9 mm)	Yes	e4			0.193 in (4.9 mm)
TL432CJ	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Ceramic				No		BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T14				No
5962-9471102NXD	Texas Instruments	Comparator	Industrial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		4 mV	100 nA	No	4		MIL-STD-883				15 V		In-Line		Comparators	36 V	0.1 in (2.54 mm)	85 °C (185 °F)				-40 °C (-40 °F)		Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)					0.785 in (19.94 mm)
LM293U	Texas Instruments	Comparator	Other	Flat	10	DFP	Rectangular		Ceramic		9 mV		Yes	2	BIPOLAR					5 V	5 V	Flatpack	FL10,.3	Comparators		0.05 in (1.27 mm)	85 °C (185 °F)				-25 °C (-13 °F)		Dual	R-XDFP-F10				No
SN72710P	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy				No		BIPOLAR							In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T8				No
LMV393D	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		7 mV	400 nA	Yes	2	CMOS		250 μA			2.7 V	2.7/5 V	Small Outline	SOP8,.25	Comparators	5.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	250 nA	400 ns		-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
TL3116CDRG4	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	-7 V	3.5 mV	1.2 uA	Yes	1	BIPOLAR		14.7 mA	-5 V		5 V	5/±5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	70 °C (158 °F)	1.1 uA	9.9 ns		0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLV7034PWR	Texas Instruments	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		8 mV	2 pA	Yes	4			3 μA		Tape And Reel	1.8 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	7 V	0.026 in (0.65 mm)	125 °C (257 °F)	2 pA	3 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)		e4		260 °C (500 °F)	0.197 in (5 mm)
TLC354CD	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		5 mV	600 pA	Yes	4	CMOS		600 μA		Tube	5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)	20 nA	650 ns	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
TL710CJG4	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Ceramic				No		BIPOLAR							In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T8
LMC7225IM5/NOPB	Texas Instruments	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular		Plastic/Epoxy	0 V	8 mV	1 nA	Yes	1	CMOS		1 μA	0 V	Tape And Reel	2.7 V	2.7/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	10 V	0.038 in (0.953 mm)	85 °C (185 °F)	0.05 pA	22 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.048 in (1.22 mm)	0.063 in (1.6 mm)	No	e3		260 °C (500 °F)	0.115 in (2.92 mm)
UC161AJ	Texas Instruments	Comparator	Military	Through-Hole	16	DIP	Rectangular		Ceramic				No	4	BIPOLAR							In-Line	DIP16,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T16				No
TLC352IPW	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy	0 V	5 mV	2 nA	Yes	2	CMOS		300 μA	0 V	Tube	5 V	1.5/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	85 °C (185 °F)	20 nA	650 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
TLC352MJG	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed		10 mV	20 nA	No	2	CMOS		400 μA			5 V	5 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	20 nA	650 ns	Open-Drain	-55 °C (-67 °F)		Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.378 in (9.6 mm)
LMV7291MGX	Texas Instruments	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular		Plastic/Epoxy	0 V	6 mV		Yes	1	BICMOS		16 μA	0 V		1.8 V	1.8/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)		2.1 µs	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e0		260 °C (500 °F)	0.079 in (2 mm)
5962-8687701QZA	Texas Instruments	Comparator	Military	Gull Wing	10	SOP	Rectangular		Ceramic, Metal-Sealed Cofired	-18 V	4 mV	100 pA	Yes	1	BIPOLAR	MIL-STD-883		-15 V		15 V		Small Outline		Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)			Open-Collector	-55 °C (-67 °F)		Dual	R-CDSO-G10		0.092 in (2.33 mm)	0.241 in (6.12 mm)	No				0.27 in (6.86 mm)
LM3302DE4	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		40 mV	-1 uA	Yes	4	BIPOLAR					5 V	5 V	Small Outline	SOP14,.25	Comparators	28 V	0.05 in (1.27 mm)	85 °C (185 °F)		1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
LMV339MTX	Texas Instruments	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		7 mV	250 nA	Yes	4	BICMOS		300 μA	0 V	Tape And Reel	2.7 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	250 nA	450 ns	Open-Collector	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e0	40	260 °C (500 °F)	0.197 in (5 mm)
5962-01-358-3483	Texas Instruments	Comparator	Other	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		9 mV		No		BIPOLAR		2 mA			5 V	5 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	85 °C (185 °F)		1.3 µs		-25 °C (-13 °F)		Dual	R-PDIP-T14				No
LM106J	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic				No		BIPOLAR						12,-3/-12 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T14				No
TLC393ID	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		5 mV	2 nA	Yes	2	CMOS		40 μA		Tube	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	2 pA	2.5 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
LMV339QDRQ1	Texas Instruments	Comparator	Automotive	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		9 mV	400 nA	Yes	2	BIPOLAR	AEC-Q100	350 μA			5 V	3/5 V	Small Outline	SOP14,.25	Comparators	6 V	0.05 in (1.27 mm)	125 °C (257 °F)	250 nA	450 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.341 in (8.65 mm)
PLM2903BIDDFR	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		2 mV	25 nA	Yes	2	BIPOLAR		800 μA		Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.1		38 V	0.026 in (0.65 mm)	125 °C (257 °F)	25 nA	1 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.043 in (1.1 mm)	0.063 in (1.6 mm)					0.114 in (2.9 mm)
TLV3404QDR	Texas Instruments	Comparator	Automotive	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy	0 V	4.4 mV	1.5 nA	Yes	1				0 V		2.7 V		Small Outline		Comparators	17 V	0.05 in (1.27 mm)	125 °C (257 °F)			Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.341 in (8.65 mm)
LM106JG/883B	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic				No		BIPOLAR	MIL-STD-883 Class B (Modified)					12,-3/-12 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T8				No
TL712CDG4	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		5 mV	600 uA	Yes	1	BIPOLAR		20 mA		Tube	5 V	5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	70 °C (158 °F)	600 uA	25 ns	Push-Pull	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLV7256IDDURG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	VSSOP	Rectangular		Plastic/Epoxy		9 mV		Yes	2	CMOS		70 μA			1.8 V	1.8/5 V	Small Outline, Very Thin Profile, Shrink Pitch	TSSOP8,.12,20	Comparators	7 V	0.02 in (0.5 mm)	85 °C (185 °F)		30 ns	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.035 in (0.9 mm)	0.079 in (2 mm)	No	e4	30 s	260 °C (500 °F)	0.091 in (2.3 mm)
TLC372CPS	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	Yes	2	CMOS		300 μA			5 V		Small Outline		Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)	30 pA	650 ns	Open-Collector	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.079 in (2 mm)	0.209 in (5.3 mm)	No	e4		260 °C (500 °F)	0.244 in (6.2 mm)
TLV2393IPWR	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		9 mV	-400 nA	Yes	2	BIPOLAR					3 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	7 V	0.026 in (0.65 mm)	105 °C (221 °F)	250 nA	450 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)	No				0.173 in (4.4 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.