Rectangular Comparators 2,400+

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
TLC3702CPWLE	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	Yes	2	CMOS		50 μA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)		2.7 µs	Push-Pull	0 °C (32 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)	No				0.173 in (4.4 mm)
NE529A	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy				No		BIPOLAR						5,±10 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T14	1			No	e0
TLV3402IP	Texas Instruments	Comparator	Automotive	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy	0 V	4.4 mV	1.5 nA	No	2			1.28 μA	0 V	Tube	5 V	±1.35/±8/2.7/16 V	In-Line	DIP8,.3	Comparators	17 V	0.1 in (2.54 mm)	125 °C (257 °F)	100 pA	175 µs	Open-Drain	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e4			0.386 in (9.81 mm)
LMC7211AIMX/NOPB	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	0 V	8 mV	1 nA	Yes	1	CMOS		12 μA	0 V	Tape And Reel	5 V	2.7/15 V	Small Outline	SOP8,.25	Comparators	16 V	0.05 in (1.27 mm)	85 °C (185 °F)	0.4 pA	4 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3		260 °C (500 °F)	0.193 in (4.9 mm)
5962R0052402V9A	Texas Instruments	Comparator	Military	No Lead	10	DIE	Rectangular	100k Rad(Si)		-30 V	4 mV	100 pA	Yes	1		MIL-PRF-38535 Class V	7 mA	-15 V		15 V		Uncased Chip		Comparators	30 V		125 °C (257 °F)			Open-Collector	-55 °C (-67 °F)		Upper	R-XUUC-N10				No
LMV339MX	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		7 mV	250 nA	Yes	4	BICMOS		350 μA			2.7 V	3/5 V	Small Outline	SOP14,.25	Comparators	5.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	250 nA	450 ns	Open-Collector	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	235 °C (455 °F)	0.341 in (8.65 mm)
TLC372MJGB	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed		10 mV	20 nA	No	2	CMOS	MIL-STD-883	300 μA		Tube	5 V	5 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	30 pA	650 ns	Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin/Lead	Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0			0.377 in (9.58 mm)
LM339AJP4	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Ceramic		4 mV		No	4	BIPOLAR		2 mA			5 V	5 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)		1.3 µs		0 °C (32 °F)		Dual	R-XDIP-T14
TLC372MP	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy		10 mV	20 nA	No	2	CMOS	MIL-STD-883	300 μA		Tape And Reel	5 V	5 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	30 pA	650 ns	Open-Collector	-55 °C (-67 °F)	Nickel/Palladium/Gold	Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e4			0.386 in (9.81 mm)
TLC339IPW	Texas Instruments	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		7 mV	2 nA	Yes	4	CMOS		80 μA		Tube	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	85 °C (185 °F)	2 pA	2.5 µs	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4		260 °C (500 °F)	0.197 in (5 mm)
TL710MJ/883B	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic				No		BIPOLAR	MIL-STD-883 Class B (Modified)						In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T14				No
5962R9452602V9A	Texas Instruments	Comparator	Military	No Lead	8	DIE	Rectangular	100k Rad(Si)		0 V	4 mV	-300 nA	Yes	2	BIPOLAR	MIL-PRF-38535 Class V	1 mA			5 V		Uncased Chip		Comparators	36 V		125 °C (257 °F)	100 nA	800 ns	Open-Collector, Open-Drain	-55 °C (-67 °F)		Upper	R-XUUC-N8	1		0.033 in (0.8382 mm)	Yes				0.034 in (0.8636 mm)
LM139MW8	Texas Instruments	Comparator	Military	No Lead	14	DIE	Rectangular			0 V	9 mV	300 nA	Yes	4	BIPOLAR	MIL-STD-883		0 V		5 V		Uncased Chip		Comparators	36 V		125 °C (257 °F)		1.3 µs	Open-Collector	-55 °C (-67 °F)		Upper	R-XUUC-N14	1			No
TLC352CPWRG4	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy	0 V	6.5 mV	600 pA	Yes	2	CMOS		400 μA	0 V		5 V	1.5/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)		650 ns	Open-Drain	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
TLC3704MJB	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic, Glass-Sealed	-18 V	10 mV	30 nA	No	4	CMOS	MIL-STD-883	80 μA		Tube	5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	30 pA	2.7 µs	Push-Pull	-55 °C (-67 °F)	Tin/Lead	Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0			0.77 in (19.56 mm)
LM529CN	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy				No		BIPOLAR						5,±10 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T14	1			No	e0
TL336IN	Texas Instruments	Comparator	Other	Through-Hole	20	DIP	Rectangular		Plastic/Epoxy				No		BIPOLAR							In-Line	DIP20,.3	Comparators		0.1 in (2.54 mm)	85 °C (185 °F)				-25 °C (-13 °F)		Dual	R-PDIP-T20				No
TL810MJ/883B	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic				No		BIPOLAR	MIL-STD-883 Class B (Modified)						In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T14				No
TLV2352Y	Texas Instruments	Comparator	Industrial	No Lead	8	DIE	Rectangular				5 mV		Yes	2	CMOS		300 μA			3 V	3/5 V	Uncased Chip	DIE OR CHIP	Comparators	8 V		85 °C (185 °F)		200 ns	Open-Drain	-40 °C (-40 °F)		Upper	R-XUUC-N8				No
TLV3494AIDG4	Texas Instruments	Comparator	Automotive	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		15 mV	10 pA	Yes	4	CMOS		1.2 μA			5 V	2/5 V	Small Outline	SOP14,.25	Comparators	5.5 V	0.05 in (1.27 mm)	125 °C (257 °F)	10 pA	12 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	2	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
LMV7239QM7	Texas Instruments	Comparator	Automotive	Gull Wing	5	TSSOP	Rectangular		Plastic/Epoxy	0 V	8 mV	600 nA	Yes	1	BIPOLAR			0 V		2.7 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)			Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.049 in (1.25 mm)					0.079 in (2 mm)
TLC3702MJG	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed		10 mV	30 nA	No	2	CMOS	MIL-STD-883	40 μA		Tube	5 V	5 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	30 pA	2.7 µs	Push-Pull	-55 °C (-67 °F)	Tin/Lead	Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0			0.377 in (9.58 mm)
TLV3601QDCKRQ1	Texas Instruments	Comparator		Gull Wing	5	TSSOP	Rectangular		Plastic/Epoxy		5 mV	5 uA	Yes	1		AEC-Q100	7 mA		Tape And Reel	2.5 V		Small Outline, Thin Profile, Shrink Pitch	TSOP5/6,.08		6 V	0.026 in (0.65 mm)	125 °C (257 °F)	5 uA	2.5 ns	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)		e4		260 °C (500 °F)	0.079 in (2 mm)
V62/03672-02YE	Texas Instruments	Comparator	Military	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy	0 V	2.5 mV	-400 nA	Yes	4	BIPOLAR		2 mA	0 V	Tape And Reel	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	36 V	0.026 in (0.65 mm)	125 °C (257 °F)	50 nA	1.3 µs	Open-Collector, Open-Drain	-55 °C (-67 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4		260 °C (500 °F)	0.197 in (5 mm)
TLV7022DDFR	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		8 mV	2 pA	Yes	2			18 μA		Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.12	Comparators	7 V	0.026 in (0.65 mm)	125 °C (257 °F)	2 pA	260 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.043 in (1.1 mm)	0.063 in (1.6 mm)		e4	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
LM360MX	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	-8 V	2 mV	20 uA	Yes	1	BIPOLAR		32 mA	-5 V	Tape And Reel	5 V	±5 V	Small Outline	SOP8,.25	Comparators	8 V	0.05 in (1.27 mm)	70 °C (158 °F)	6 uA	14 ns	Totem Pole	0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	235 °C (455 °F)	0.193 in (4.9 mm)
SN72510N	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy				No		BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T14				No
LMV339PWRLE	Texas Instruments	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		7 mV	400 nA	Yes	4						2.7 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)		400 ns		-40 °C (-40 °F)		Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No				0.197 in (5 mm)
LM2901PWG4	Texas Instruments	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		7 mV	500 nA	Yes	4	BIPOLAR		2.5 mA		Tube	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	36 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
TL514MW	Texas Instruments	Comparator	Military	Flat	14	DFP	Rectangular		Ceramic, Glass-Sealed		3 mV	15 uA	Yes	2	BIPOLAR		18 mA	-6 V		12 V		Flatpack	FL14,.3	Comparators		0.05 in (1.27 mm)	125 °C (257 °F)		30 ns	Totem Pole	-55 °C (-67 °F)		Dual	R-GDFP-F14		0.08 in (2.03 mm)	0.25 in (6.35 mm)	No				0.344 in (8.725 mm)
TLC374CD3	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		6.5 mV		Yes		CMOS		800 μA			5 V	5 V	Small Outline	SOP14,.25	Comparators		0.05 in (1.27 mm)	70 °C (158 °F)	600 pA	650 ns		0 °C (32 °F)		Dual	R-PDSO-G14
TLC393MDR	Texas Instruments	Comparator	Military	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		10 mV	30 nA	Yes	2	CMOS		90 μA			5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	30 nA	2.5 µs	Open-Drain	-55 °C (-67 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
LM311DP3	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		10 mV		Yes		BIPOLAR			-15 V		15 V	±15 V	Small Outline	SOP8,.25	Comparators		0.05 in (1.27 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDSO-G8
LMV339IPWG4	Texas Instruments	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		9 mV	400 nA	Yes	4	BIPOLAR		350 μA			5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	5.5 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	600 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
TLV7044PWR	Texas Instruments	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		8 mV	2 pA	Yes	4			3 μA		Tape And Reel	1.8 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	7 V	0.026 in (0.65 mm)	125 °C (257 °F)	2 pA	3 µs	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)		e4		260 °C (500 °F)	0.197 in (5 mm)
TLV1393IP-00	Texas Instruments	Comparator	Industrial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy		9 mV	-400 nA	No	2	BIPOLAR					3 V		In-Line			7 V	0.1 in (2.54 mm)	105 °C (221 °F)		700 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.386 in (9.81 mm)
TL432MJ	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic				No		BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T14				No
TLC339MJB	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic		10 mV		No	4	CMOS	38535Q/M;38534H;883B	175 μA			5 V	5 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)	30 nA	2.5 µs		-55 °C (-67 °F)		Dual	R-XDIP-T14				No
TL820MJB	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic				No		BIPOLAR	38535Q/M;38534H;883B						In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T14				No
TLV3404CDRG4	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy	0 V	4.4 mV	1.5 nA	Yes	4			3.8 μA	0 V		2.7 V	±1.25/±8/2.5/16 V	Small Outline	SOP14,.25	Comparators	17 V	0.05 in (1.27 mm)	70 °C (158 °F)	250 pA	175 µs	Open-Drain	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
TL811CN	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy				No		BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T14				No
TL3016Y	Texas Instruments	Comparator	Commercial	No Lead	8	DIE	Rectangular			-7 V	3 mV	10 uA	Yes	1				-5 V		5 V		Uncased Chip			7 V		70 °C (158 °F)		7.8 µs		0 °C (32 °F)		Upper	R-XUUC-N8				No
LM306N	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy				No	1	BIPOLAR						12,-3/-12 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T14				No
LM306DE4	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	-15 V	6.5 mV	40 uA	Yes	1	BIPOLAR		10 mA	-12 V		12 V	12,-3/-12 V	Small Outline	SOP8,.25	Comparators	15 V	0.05 in (1.27 mm)	70 °C (158 °F)		28 ns	Totem Pole	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLC352CDG4	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	0 V	6.5 mV	600 pA	Yes	2	CMOS		200 μA	0 V		5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)	600 pA	650 ns	Open-Drain	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
SN72710N	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy				No		BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T14				No
PLM2903BIDR	Texas Instruments	Comparator	Automotive	Gull Wing	8	HSOP	Rectangular		Plastic/Epoxy		4 mV	50 nA	Yes	2						5 V		Small Outline, Heat Sink/Slug		Comparators	38 V	0.05 in (1.27 mm)	125 °C (257 °F)		1 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.153 in (3.895 mm)					0.193 in (4.905 mm)
TL721CP3	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy				No		BIPOLAR							In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T8

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.