Rectangular Comparators 2,400+

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
TLC3704CPWRG4	Texas Instruments	Comparator	Commercial	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy	-18 V	6.5 mV	600 pA	Yes	4	CMOS		80 μA		Tape And Reel	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)	30 pA	2.7 µs	Push-Pull	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4		260 °C (500 °F)	0.197 in (5 mm)
TLC372QP	Texas Instruments	Comparator	Automotive	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy		10 mV	20 nA	No	2	CMOS		400 μA			5 V	5 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	20 nA	650 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.386 in (9.81 mm)
TLV3502AIDCN	Texas Instruments	Comparator	Automotive	Gull Wing	8	LSSOP	Rectangular		Plastic/Epoxy		6.5 mV	10 pA	Yes	2						5 V		Small Outline, Low Profile, Shrink Pitch		Comparators	5.5 V	0.026 in (0.65 mm)	125 °C (257 °F)		7.5 ns	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.057 in (1.45 mm)	0.064 in (1.625 mm)					0.114 in (2.9 mm)
TL712CPSR	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		5 mV	600 uA	Yes	1	BIPOLAR		20 mA		Tape And Reel	5 V	5 V	Small Outline	SOP8,.3	Comparators	7 V	0.05 in (1.27 mm)	70 °C (158 °F)	600 uA	25 ns	Push-Pull	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.079 in (2 mm)	0.209 in (5.3 mm)	No	e4	30 s	260 °C (500 °F)	0.244 in (6.2 mm)
LMC6762BIN	Texas Instruments	Comparator	Industrial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy		18 mV		No	2	CMOS					5 V		In-Line		Comparators	16 V	0.1 in (2.54 mm)	85 °C (185 °F)		6 µs	Push-Pull	-40 °C (-40 °F)		Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)					0.386 in (9.817 mm)
LP2901DG4	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		9 mV	40 nA	Yes	4	BIPOLAR		100 μA			5 V	5 V	Small Outline	SOP14,.25	Comparators	36 V	0.05 in (1.27 mm)	85 °C (185 °F)	25 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
5962-9555001NXDX	Texas Instruments	Comparator	Military	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy	-18 V	10 mV	30 nA	Yes	1	CMOS	MIL-PRF-38535 Class N	175 μA			5 V		Small Outline			18 V	0.05 in (1.27 mm)	125 °C (257 °F)				-55 °C (-67 °F)	Palladium	Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4			0.341 in (8.65 mm)
LMV7255M5X	Texas Instruments	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular		Plastic/Epoxy		8 mV		Yes	1	BICMOS					2.7 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	5.5 V	0.037 in (0.95 mm)	85 °C (185 °F)		730 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.063 in (1.6 mm)					0.114 in (2.9 mm)
LM193J-MPR	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed		9 mV	300 nA	No	2	BIPOLAR					5 V		In-Line		Comparators	36 V	0.1 in (2.54 mm)	125 °C (257 °F)		1.3 µs	Open-Collector	-55 °C (-67 °F)		Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No
5962R0052402VPA	Texas Instruments	Comparator	Military	Pin/Peg	8	DIP	Rectangular	50k Rad(Si)	Ceramic, Metal-Sealed Cofired	-30 V	4 mV	1 nA	No	1	BIPOLAR	MIL-PRF-38535 Class V	6 mA	-15 V		15 V		In-Line		Comparators	30 V	0.1 in (2.54 mm)	125 °C (257 °F)	100 nA	200 ns	Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin/Lead	Dual	R-CDIP-P8	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)	Yes	e0			0.4 in (10.16 mm)
LMV393QDRG4Q1	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		9 mV	400 nA	Yes	2	BIPOLAR	AEC-Q100	140 μA			5 V	3/5 V	Small Outline	SOP8,.25	Comparators	5.5 V	0.05 in (1.27 mm)	125 °C (257 °F)	250 nA	450 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
PLM2903EPWRQ1	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy	0 V	15 mV	50 nA	Yes	2	BIPOLAR	AEC-Q100	2.5 mA	0 V	Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	36 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)					0.173 in (4.4 mm)
5962-9452602MPX	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed	0 V	4 mV	-1 nA	No	2	BIPOLAR	MIL-STD-883	2.5 mA	0 V		5 V		In-Line		Comparators	36 V	0.1 in (2.54 mm)	125 °C (257 °F)			Open-Collector	-55 °C (-67 °F)		Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	Yes
TLC352CPWR	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy	0 V	5 mV	600 pA	Yes	2	CMOS		300 μA	0 V	Tape And Reel	5 V	1.5/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)	20 nA	650 ns	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
UA711CJP4	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Ceramic				No	2	BIPOLAR						12,-6 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T14
5962R0052402VZA	Texas Instruments	Comparator	Military	Gull Wing	10	SOP	Rectangular	50k Rad(Si)	Plastic/Epoxy	-30 V	4 mV	1 nA	Yes	1	BIPOLAR	MIL-PRF-38535 Class V	6 mA	-15 V		15 V		Small Outline		Comparators	30 V	0.05 in (1.27 mm)	125 °C (257 °F)	100 nA	200 ns	Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin Lead	Dual	R-PDSO-G10	1	0.092 in (2.33 mm)	0.241 in (6.12 mm)	Yes	e0			0.27 in (6.86 mm)
TL712CPSE4	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		5 mV		Yes	1	BIPOLAR					5 V		Small Outline		Comparators	7 V	0.05 in (1.27 mm)	70 °C (158 °F)		25 ns	3-State	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.079 in (2 mm)	0.209 in (5.3 mm)	No	e4	30 s	260 °C (500 °F)	0.244 in (6.2 mm)
LM2901QDR	Texas Instruments	Comparator	Automotive	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		15 mV	-500 nA	Yes	4	BIPOLAR					5 V		Small Outline		Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)		1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.341 in (8.65 mm)
TLV1393IPWLE	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		9 mV	-400 nA	Yes	2	BIPOLAR		350 μA			5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	7 V	0.026 in (0.65 mm)	105 °C (221 °F)	250 nA	650 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)	No				0.173 in (4.4 mm)
LM306D3	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy				Yes	1	BIPOLAR						12,-3/-12 V	Small Outline	SOP8,.25	Comparators		0.05 in (1.27 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDSO-G8
TLV1704AQPWQ1	Texas Instruments	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		5.5 mV	20 nA	Yes	4	BIPOLAR	AEC-Q100	300 μA					Small Outline, Thin Profile, Shrink Pitch		Comparators	40 V	0.026 in (0.65 mm)	125 °C (257 °F)	15 nA	560 ns	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	2	0.047 in (1.2 mm)	0.173 in (4.4 mm)		e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
LT1016CP	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy	-7 V	3.5 mV	13 uA	No	1	BIPOLAR		35 mA	-5 V		5 V	±5 V	In-Line	DIP8,.3	Comparators	7 V	0.1 in (2.54 mm)	70 °C (158 °F)	10 uA	10 ns		0 °C (32 °F)		Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.386 in (9.81 mm)
SN52710S	Texas Instruments	Comparator	Military	Flat	10	DFP	Rectangular		Ceramic				Yes		BIPOLAR							Flatpack	FL10,.3	Comparators		0.05 in (1.27 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDFP-F10				No
5962-7700801VCA	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic, Glass-Sealed		2 mV	-300 nA	No	4	BIPOLAR	MIL-PRF-38535 Class V	2 mA		Tube	5 V	5 V	In-Line	DIP14,.3	Comparators	36 V	0.1 in (2.54 mm)	125 °C (257 °F)	25 nA	1.3 µs	Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin Lead	Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	Yes	e0			0.785 in (19.94 mm)
TLV3704IDR	Texas Instruments	Comparator	Automotive	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy	0 V	7 mV	1.5 nA	Yes	4	CMOS		3.2 μA	0 V	Tape And Reel	5 V	±1.35/±8/2.7/16 V	Small Outline	SOP14,.25	Comparators	17 V	0.05 in (1.27 mm)	125 °C (257 °F)	100 pA	240 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.341 in (8.65 mm)
TLV3701IPE4	Texas Instruments	Comparator	Automotive	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy	0 V	7 mV	1.5 nA	No	1	CMOS		1 μA	0 V		5 V	±1.35/±8/2.7/16 V	In-Line	DIP8,.3	Comparators	17 V	0.1 in (2.54 mm)	125 °C (257 °F)	250 pA	240 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e4			0.386 in (9.81 mm)
TLC139MN	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		10 mV	30 nA	No	4	CMOS		175 μA			5 V		In-Line			18 V	0.1 in (2.54 mm)	125 °C (257 °F)		2.5 µs	Open-Drain	-55 °C (-67 °F)		Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.76 in (19.305 mm)
TL710CN3	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy				No		BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T14
SN52106JP	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic				No		BIPOLAR						12,-3/-12 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T8				No
TLC374CJP4	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Ceramic		6.5 mV		No		CMOS		800 μA			5 V	5 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)	600 pA	650 ns		0 °C (32 °F)		Dual	R-XDIP-T14
V62/04726-01XE	Texas Instruments	Comparator	Automotive	Gull Wing	5	LSSOP	Rectangular		Plastic/Epoxy	0 V	5 mV	100 pA	Yes	1	CMOS		800 nA	0 V	Tape And Reel	5 V	±1.35/±8/2.7/16 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	17 V	0.037 in (0.95 mm)	125 °C (257 °F)	100 pA	240 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)	No	e4	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
TLV3401IDBV	Texas Instruments	Comparator	Automotive	Gull Wing	5	LSSOP	Rectangular		Plastic/Epoxy	0 V	4.4 mV	1.5 nA	Yes	1			950 nA	0 V		5 V	±1.35/±8/2.7/16 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	17 V	0.037 in (0.95 mm)	125 °C (257 °F)	250 pA	175 µs	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.063 in (1.6 mm)	No				0.114 in (2.9 mm)
TLV3704CPWG4	Texas Instruments	Comparator	Commercial	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy	0 V	7 mV	1.5 nA	Yes	4	CMOS		1 μA	0 V		2.7 V	±1.25/±8/2.5/16 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	17 V	0.026 in (0.65 mm)	70 °C (158 °F)	250 pA	240 µs	Push-Pull	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
TL810MU/883B	Texas Instruments	Comparator	Military	Flat	10	DFP	Rectangular		Ceramic				Yes		BIPOLAR	MIL-STD-883 Class B (Modified)						Flatpack	FL10,.3	Comparators		0.05 in (1.27 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDFP-F10				No
TL710CP3	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy				No		BIPOLAR							In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T8
5962-9679801VHA	Texas Instruments	Comparator	Military	Flat	10	DFP	Rectangular		Ceramic, Glass-Sealed	-18 V	6.8 mV	950 nA	Yes	2	BIPOLAR	MIL-STD-883						Flatpack		Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)			Open-Collector	-55 °C (-67 °F)		Dual	R-GDFP-F10		0.08 in (2.032 mm)	0.241 in (6.1214 mm)	No				0.27 in (6.858 mm)
LM111WLQMLV	Texas Instruments	Comparator	Military	Flat	10	DFP	Rectangular	50k Rad(Si)	Ceramic, Glass-Sealed	-18 V	4 mV	150 nA	Yes	1	BIPOLAR	MIL-PRF-38535 Class V	6 mA	-15 V	Tube	15 V	±15 V	Flatpack	FL10,.3	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	100 nA	200 ns	Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin Lead	Dual	R-GDFP-F10	1	0.08 in (2.032 mm)	0.248 in (6.3 mm)	No	e0			0.27 in (6.858 mm)
TLC371MDR	Texas Instruments	Comparator	Military	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		10 mV	20 nA	Yes	1	CMOS		200 μA			5 V		Small Outline			18 V	0.05 in (1.27 mm)	125 °C (257 °F)		650 ns	Open-Drain	-55 °C (-67 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
TLC3704MJ	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic, Glass-Sealed	-18 V	10 mV	30 nA	No	4	CMOS					5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)		2.7 µs	Push-Pull	-55 °C (-67 °F)		Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.77 in (19.56 mm)
TLC339CPWR	Texas Instruments	Comparator	Commercial	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	Yes	4	CMOS		80 μA		Tape And Reel	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)	2 pA	2.5 µs	Open-Collector	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4		260 °C (500 °F)	0.197 in (5 mm)
UA710MU/883B	Texas Instruments	Comparator	Military	Flat	10	DFP	Rectangular		Ceramic				Yes		BIPOLAR	MIL-STD-883 Class B (Modified)					12,-6 V	Flatpack	FL10,.3	Comparators		0.05 in (1.27 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDFP-F10				No
LM193U/883B	Texas Instruments	Comparator	Military	Flat	10	DFP	Rectangular		Ceramic		9 mV		Yes		BIPOLAR	MIL-STD-883 Class B (Modified)				5 V	5 V	Flatpack	FL10,.3	Comparators		0.05 in (1.27 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDFP-F10				No
LP339D	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		9 mV	40 nA	Yes	4	BIPOLAR		100 μA		Tube	5 V	5 V	Small Outline	SOP14,.25	Comparators	36 V	0.05 in (1.27 mm)	70 °C (158 °F)	25 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.341 in (8.65 mm)
LM339DP3	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		9 mV		Yes	4	BIPOLAR		2 mA			5 V	5 V	Small Outline	SOP14,.25	Comparators		0.05 in (1.27 mm)	70 °C (158 °F)		1.3 µs		0 °C (32 °F)		Dual	R-PDSO-G14
TL712CP	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy		5 mV	600 uA	No	1	BIPOLAR		20 mA		Tube	5 V	5 V	In-Line	DIP8,.3	Comparators	7 V	0.1 in (2.54 mm)	70 °C (158 °F)	600 uA	25 ns	Push-Pull	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDIP-T8	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e4			0.386 in (9.81 mm)
TLV1391IDBVRE4	Texas Instruments	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular		Plastic/Epoxy		9 mV	-400 nA	Yes	1	BIPOLAR		150 μA			3 V	3/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	7 V	0.037 in (0.95 mm)	85 °C (185 °F)	250 nA	700 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)	No	e4	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
UA711MU/883B	Texas Instruments	Comparator	Military	Flat	10	DFP	Rectangular		Ceramic				Yes		BIPOLAR	MIL-STD-883 Class B (Modified)					12,-6 V	Flatpack	FL10,.3	Comparators		0.05 in (1.27 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDFP-F10				No
LM2903QDR	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		15 mV	-500 nA	Yes	2	BIPOLAR		2.5 mA			5 V	5/30 V	Small Outline	SOP8,.25	Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.