Rectangular Comparators 2,400+

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Nominal Unity Gain Bandwidth	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Minimum Common Mode Reject Ratio	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Maximum Common Mode Voltage	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Nominal Bandwidth (3dB)	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
TLV3401ID	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		0 V	4.4 mV	1.5 nA	Yes	1				640 nA	0 V	Tube	5 V	±1.35/±8/2.7/16 V	Small Outline	SOP8,.25	Comparators	17 V	0.05 in (1.27 mm)	125 °C (257 °F)	100 pA		175 µs	Open-Drain	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4		260 °C (500 °F)	0.193 in (4.9 mm)
LT1016CD	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		-7 V	3.5 mV	13 uA	Yes	1		BIPOLAR		35 mA	-5 V		5 V	±5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	70 °C (158 °F)	10 uA		10 ns		0 °C (32 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No					0.193 in (4.9 mm)
INA209AIPW	Texas Instruments	Comparator	Automotive	Gull Wing	16	TSSOP	Rectangular		Plastic/Epoxy	5.5 kHz		100 uV		Yes	1	120 dB			1.5 mA		Tube	3.3 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	5.5 V	0.026 in (0.65 mm)	125 °C (257 °F)		26 V		Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G16	2	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
LM2903PS	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		0 V	15 mV	-500 nA	Yes	2		BIPOLAR		2.5 mA	0 V		5 V	5 V	Small Outline	SOP8,.3	Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	250 nA		1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.079 in (2 mm)	0.209 in (5.3 mm)	No		e4	30 s	260 °C (500 °F)	0.244 in (6.2 mm)
LM239AN	Texas Instruments	Comparator	Other	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy			4 mV	-400 nA	No	4		BIPOLAR		2 mA			5 V	5 V	In-Line	DIP14,.3	Comparators	36 V	0.1 in (2.54 mm)	85 °C (185 °F)			1.3 µs	Open-Collector	-25 °C (-13 °F)		Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No					0.76 in (19.305 mm)
TL3116ID	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		-7 V	3 mV	1.5 uA	Yes	1		BIPOLAR		14.7 mA	-5 V	Tube	5 V	5/±5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	85 °C (185 °F)	1.1 uA		9.9 ns		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
LMV331DBVRLR	Texas Instruments	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular		Plastic/Epoxy			7 mV	400 nA	Yes	1							2.7 V		Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37		5.5 V	0.037 in (0.95 mm)	85 °C (185 °F)			400 ns		-40 °C (-40 °F)		Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.063 in (1.6 mm)	No					0.114 in (2.9 mm)
TLC339CN10	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy			6.5 mV	600 pA	No	4		CMOS		100 μA			5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)			2.5 µs	Open-Drain	0 °C (32 °F)		Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No					0.76 in (19.305 mm)
TLV1393IP	Texas Instruments	Comparator	Industrial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy			9 mV	-400 nA	No	2		BIPOLAR		350 μA			3 V	3/5 V	In-Line	DIP8,.3	Comparators	7 V	0.1 in (2.54 mm)	105 °C (221 °F)	250 nA		700 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No					0.386 in (9.81 mm)
TLC139MJB	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic, Glass-Sealed			10 mV	30 nA	No	4		CMOS	38535Q/M;38534H;883B	80 μA		Tube	5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	30 pA		2.5 µs	Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin/Lead	Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No		e0			0.785 in (19.94 mm)
TLV3704QDRQ1	Texas Instruments	Comparator	Automotive	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy			7 mV	2 nA	Yes	4			AEC-Q100				5 V	±1.35/±8/2.7/16 V	Small Outline	SOP14,.25	Comparators	17 V	0.05 in (1.27 mm)	125 °C (257 °F)	250 pA		240 µs	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No					0.39 in (9.9 mm)
5962R9679802VHA	Texas Instruments	Comparator	Military	Flat		DFP	Rectangular	100k Rad(Si)	Ceramic, Glass-Sealed		-18 V	6.8 mV	950 nA	Yes	2		BIPOLAR	MIL-PRF-38535 Class V	11 mA	-15 V		15 V		Flatpack		Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	500 nA		80 ns	Open-Collector	-55 °C (-67 °F)	Tin/Lead	Dual	R-GDFP-F10	1	0.08 in (2.032 mm)	0.241 in (6.12 mm)	Yes		e0			0.27 in (6.858 mm)
LM139J-N	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic			9 mV		No	4		BIPOLAR		2.5 mA			5 V	5 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)	100 nA		1.3 µs		-55 °C (-67 °F)		Dual	R-XDIP-T14				No
LM2903DBLE	Texas Instruments	Comparator	Automotive	Gull Wing	8	SSOP	Rectangular		Plastic/Epoxy			15 mV	-500 nA	Yes	2		BIPOLAR		2.5 mA			5 V		Small Outline, Shrink Pitch		Comparators	36 V	0.026 in (0.65 mm)	125 °C (257 °F)			1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.079 in (2 mm)	0.118 in (3 mm)	No					0.209 in (5.3 mm)
TL811CJ4	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Ceramic					No			BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)					0 °C (32 °F)		Dual	R-XDIP-T14
TLC3702IPE4	Texas Instruments	Comparator	Industrial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy			7 mV	2 nA	No	2		CMOS		40 μA		Tube	5 V	5 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	85 °C (185 °F)	30 pA		2.7 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No		e4			0.386 in (9.81 mm)
TLV3494AMDREP	Texas Instruments	Comparator	Military	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy			25 mV	1.6 nA	Yes	1		CMOS		8.4 μA			5 V	2/5 V	Small Outline	SOP14,.25	Comparators	5.5 V	0.05 in (1.27 mm)	125 °C (257 °F)	50 pA		1.2 µs	Push-Pull	-55 °C (-67 °F)		Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No					0.193 in (4.9 mm)
LMV339DR	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy			7 mV	400 nA	Yes	4				350 μA			2.7 V	2.7/5 V	Small Outline	SOP14,.25	Comparators	5.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	250 nA		400 ns		-40 °C (-40 °F)		Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No					0.341 in (8.65 mm)
LMV331QDCKR	Texas Instruments	Comparator	Automotive	Gull Wing	5	TSSOP	Rectangular		Plastic/Epoxy			9 mV	400 nA	Yes	1		BIPOLAR		100 μA			5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	5.5 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA		450 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.049 in (1.25 mm)	No					0.079 in (2 mm)
LM193D	Texas Instruments	Comparator	Military	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		0 V	9 mV	-300 nA	Yes	2		BIPOLAR		2.5 mA	0 V		5 V	5/30 V	Small Outline	SOP8,.25	Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	100 nA		1.3 µs	Open-Collector	-55 °C (-67 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No					0.193 in (4.9 mm)
TL3116CDR	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		-7 V	3 mV	1.2 uA	Yes	1		BIPOLAR		14.7 mA	-5 V	Tape And Reel	5 V	5/±5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	70 °C (158 °F)	1.1 uA		9.9 ns		0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
LM293JG4	Texas Instruments	Comparator	Other	Through-Hole	8	DIP	Rectangular		Ceramic			9 mV		No			BIPOLAR		2.5 mA			5 V	5 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	85 °C (185 °F)	250 nA		1.3 µs		-25 °C (-13 °F)		Dual	R-XDIP-T8
TLV3702IDRG4	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		0 V	7 mV	1.5 nA	Yes	2		CMOS		2 μA	0 V		5 V	±1.35/±8/2.7/16 V	Small Outline	SOP8,.25	Comparators	17 V	0.05 in (1.27 mm)	125 °C (257 °F)	250 pA		240 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLV3704CPWRG4	Texas Instruments	Comparator	Commercial	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy			7 mV		Yes			CMOS		4 μA				±1.25/±8/2.5/16 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators		0.026 in (0.65 mm)	70 °C (158 °F)	250 pA		240 µs		0 °C (32 °F)		Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	4.4 MHz				0.197 in (5 mm)
TLC372QDR	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy			10 mV	20 nA	Yes	2		CMOS		300 μA		Tape And Reel	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	30 pA		650 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLC3704CDR	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		-18 V	6.5 mV	600 pA	Yes	4		CMOS		80 μA		Tape And Reel	5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)	30 pA		2.7 µs	Push-Pull	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4		260 °C (500 °F)	0.341 in (8.65 mm)
LM319N3	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy			10 mV		No			BIPOLAR			-15 V		15 V	±15 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)					0 °C (32 °F)		Dual	R-PDIP-T14
SN52811Z	Texas Instruments	Comparator	Military	Flat	14	DFP	Rectangular		Ceramic					Yes			BIPOLAR							Flatpack	FL14,.3	Comparators		0.05 in (1.27 mm)	125 °C (257 °F)					-55 °C (-67 °F)		Dual	R-XDFP-F14				No
5962-01-041-7282	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy			10 mV		No			BIPOLAR			-15 V		15 V	±15 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)					0 °C (32 °F)		Dual	R-PDIP-T14				No
TL721JG	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed		-7 V	1 mV		No	1		BIPOLAR		17 mA	-5.2 V				In-Line				0.1 in (2.54 mm)	70 °C (158 °F)				Open-Emitter	0 °C (32 °F)		Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No					0.378 in (9.6 mm)
TLV4062DRYR	Texas Instruments	Comparator	Automotive	No Lead	6	HVSON	Rectangular		Plastic/Epoxy			6 mV	15 nA	Yes	2				12 μA		Tape And Reel	3.3 V		Small Outline, Heat Sink/Slug, Very Thin Profile	SOLCC6,.03,20	Comparators	7 V	0.02 in (0.5 mm)	125 °C (257 °F)	15 nA		5.5 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold Silver	Dual	R-PDSO-G6	1	0.026 in (0.65 mm)	0.039 in (1 mm)			e4	30 s	260 °C (500 °F)	0.057 in (1.45 mm)
LM139AJ/NOPB	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic, Glass-Sealed		0 V	4 mV	300 nA	No	4		BIPOLAR			0 V		5 V		In-Line		Comparators	36 V	0.1 in (2.54 mm)	125 °C (257 °F)			1.3 µs	Open-Collector	-55 °C (-67 °F)		Dual	R-GDIP-T14	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)	No			30 s	260 °C (500 °F)	0.765 in (19.43 mm)
5962-01-246-9682	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic			10 mV		No			CMOS	MIL-STD-883 Class B (Modified)	800 μA			5 V	5 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)	20 nA		650 ns		-55 °C (-67 °F)		Dual	R-XDIP-T14				No
TLC354CDBR	Texas Instruments	Comparator	Commercial	Gull Wing	14	SSOP	Rectangular		Plastic/Epoxy		0 V	6.5 mV		Yes	4		CMOS			0 V		5 V		Small Outline, Shrink Pitch		Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)			650 ns	Open-Drain	0 °C (32 °F)		Dual	R-PDSO-G14		0.079 in (2 mm)	0.209 in (5.3 mm)	No					0.244 in (6.2 mm)
TLC339QDR	Texas Instruments	Comparator	Automotive	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy			10 mV	30 nA	Yes	4		CMOS		125 μA			5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)			2.5 µs	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No					0.341 in (8.65 mm)
PLM2903BQPWRQ1	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		0 V	4 mV	50 nA	Yes	2		BIPOLAR	AEC-Q100	2.5 mA	0 V	Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	38 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA		1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)						0.173 in (4.4 mm)
TLV3401CDG4	Texas Instruments	Comparator	Commercial	Gull Wing	5	LSSOP	Rectangular		Plastic/Epoxy		0 V	4.4 mV	1.5 nA	Yes	1				950 nA	0 V		2.7 V	±1.25/±8/2.5/16 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	17 V	0.037 in (0.95 mm)	70 °C (158 °F)	250 pA		175 µs	Open-Drain	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)	No		e4	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
LM339D3	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy			9 mV		Yes			BIPOLAR		2 mA			5 V	5 V	Small Outline	SOP14,.25	Comparators		0.05 in (1.27 mm)	70 °C (158 °F)			1.3 µs		0 °C (32 °F)		Dual	R-PDSO-G14
TLV3701CDG4	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		0 V	7 mV	1.5 nA	Yes	1		CMOS		1 μA	0 V		2.7 V	±1.25/±8/2.5/16 V	Small Outline	SOP8,.25	Comparators	17 V	0.05 in (1.27 mm)	70 °C (158 °F)	250 pA		240 µs	Push-Pull	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLV3404CPWR	Texas Instruments	Comparator	Commercial	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		0 V	4.4 mV	1.5 nA	Yes	4				2.56 μA	0 V	Tape And Reel	2.7 V	±1.25/±8/2.5/16 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	17 V	0.026 in (0.65 mm)	70 °C (158 °F)	100 pA		175 µs	Open-Drain	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		e4		260 °C (500 °F)	0.197 in (5 mm)
TLV7012DDFR	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy			8 mV	2 pA	Yes	2				18 μA		Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.12	Comparators	7 V	0.026 in (0.65 mm)	125 °C (257 °F)	2 pA		260 ns	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.043 in (1.1 mm)	0.063 in (1.6 mm)			e4	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
TLC3704CNSRG4	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		-18 V	6.5 mV	600 pA	Yes	4		CMOS		100 μA			5 V	5 V	Small Outline	SOP14,.3	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)			2.7 µs	Push-Pull	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.079 in (2 mm)	0.209 in (5.3 mm)	No		e4	30 s	260 °C (500 °F)	0.402 in (10.2 mm)
LMC7221AIM	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		0 V	8 mV	0.04 pA	Yes	1		CMOS		18 μA	0 V		5 V	2.7/15 V	Small Outline	SOP8,.25	Comparators	16 V	0.05 in (1.27 mm)	85 °C (185 °F)			7 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.753 mm)	0.154 in (3.899 mm)	No		e0	20 s	235 °C (455 °F)	0.193 in (4.902 mm)
SN72711J	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Ceramic					No	2		BIPOLAR						12,-6 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)					0 °C (32 °F)		Dual	R-XDIP-T14				No
TL811MU	Texas Instruments	Comparator	Military	Flat	10	DFP	Rectangular		Ceramic					Yes			BIPOLAR							Flatpack	FL10,.3	Comparators		0.05 in (1.27 mm)	125 °C (257 °F)					-55 °C (-67 °F)		Dual	R-XDFP-F10				No
LM319N-N	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy			10 mV		No	2		BIPOLAR		12.5 mA	-15 V		15 V	±15 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)	1 uA		80 ns		0 °C (32 °F)		Dual	R-PDIP-T14				No
TL3016IPWG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		-7 V	3.5 mV	10 uA	Yes	1		BIPOLAR		12.5 mA	-5 V		5 V	±5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)	10 uA		7.8 µs		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No		e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
LH2111D/883	Texas Instruments	Comparator	Military	Through-Hole	16	DIP	Rectangular		Ceramic			3 mV		No	2		BIPOLAR	38535Q/M;38534H;883B	6 mA	-15 V		15 V	±15 V	In-Line	DIP16,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)	100 nA		200 ns		-55 °C (-67 °F)		Dual	R-XDIP-T16				No

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.