Rectangular Comparators 2,400+

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Minimum Isolation Voltage	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
TLV9024DYYR	Texas Instruments	Comparator		Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		2 mV		Yes	4			140 μA			Tape And Reel, 13 Inch	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.12,20		6 V	0.02 in (0.5 mm)	125 °C (257 °F)		150 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.043 in (1.1 mm)	0.079 in (2 mm)				260 °C (500 °F)	0.165 in (4.2 mm)
AMC23C15QDWVRQ1	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular	Plastic/Epoxy			25 nA	Yes	2		AEC-Q100	8.6 mA			Tape And Reel	5 V		Small Outline	SOP8,.45		30 V	0.05 in (1.27 mm)	125 °C (257 °F)	25 nA	410 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	3	0.11 in (2.8 mm)	0.23 in (5.85 mm)		e4		260 °C (500 °F)	0.295 in (7.5 mm)
TLV3011BIDBVR	Texas Instruments	Comparator		Gull Wing	6	LSSOP	Rectangular	Plastic/Epoxy		9 mV	10 pA	Yes	1			3.6 μA			Tape And Reel	5 V		Small Outline, Low Profile, Shrink Pitch	TSOP6,.11,37		7 V	0.037 in (0.95 mm)	125 °C (257 °F)	10 pA	2 µs	Open-Drain	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G6	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)		e4			0.114 in (2.9 mm)
LM2901BQPWRQ1	Texas Instruments	Comparator		Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		5.5 mV	-50 nA	Yes	4	BIPOLAR	AEC-Q100	1.6 mA			Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25		38 V	0.026 in (0.65 mm)	125 °C (257 °F)	-25 nA	1 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)		e4		260 °C (500 °F)	0.197 in (5 mm)
TLV3011BQDBVRQ1	Texas Instruments	Comparator		Gull Wing	6	LSSOP	Rectangular	Plastic/Epoxy		6 mV	10 pA	Yes	1		AEC-Q100	3.6 μA			Tape And Reel	5 V		Small Outline, Low Profile, Shrink Pitch	TSOP6,.11,37		7 V	0.037 in (0.95 mm)	125 °C (257 °F)	10 pA	12 µs	Open-Drain	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G6	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)		e4			0.114 in (2.9 mm)
TLV3012BQDBVRQ1	Texas Instruments	Comparator		Gull Wing	6	LSSOP	Rectangular	Plastic/Epoxy		6 mV	10 pA	Yes	1		AEC-Q100	3.6 μA			Tape And Reel	5 V		Small Outline, Low Profile, Shrink Pitch	TSOP6,.11,37		7 V	0.037 in (0.95 mm)	125 °C (257 °F)	10 pA	2 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G6	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)		e4			0.114 in (2.9 mm)
TLV9034DYYR	Texas Instruments	Comparator		Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		2 mV		Yes	4			140 μA			Tape And Reel, 13 Inch	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.12,20		6 V	0.02 in (0.5 mm)	125 °C (257 °F)		115 ns	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.043 in (1.1 mm)	0.079 in (2 mm)				260 °C (500 °F)	0.165 in (4.2 mm)
TLV3012BQDCKRQ1	Texas Instruments	Comparator		Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy		6 mV	10 pA	Yes	1		AEC-Q100	3.6 μA			Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08		7 V	0.026 in (0.65 mm)	125 °C (257 °F)	10 pA	2 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G6	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)		e4			0.079 in (2 mm)
LM339LVDYYR	Texas Instruments	Comparator		Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		3 mV		Yes	4			200 μA			Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.12,20		6 V	0.02 in (0.5 mm)	125 °C (257 °F)		600 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.043 in (1.1 mm)	0.079 in (2 mm)		e4		260 °C (500 °F)	0.165 in (4.2 mm)
TLV3011BQDCKRQ1	Texas Instruments	Comparator		Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy		6 mV	10 pA	Yes	1		AEC-Q100	3.6 μA			Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08		7 V	0.026 in (0.65 mm)	125 °C (257 °F)	10 pA	12 µs	Open-Drain	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G6	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)		e4			0.079 in (2 mm)
AMC23C15DWVR	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular	Plastic/Epoxy			25 nA	Yes	2			8.6 mA		750 V	Tape And Reel	5 V		Small Outline	SOP8,.45		30 V	0.05 in (1.27 mm)	125 °C (257 °F)	25 nA	280 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	3	0.11 in (2.8 mm)	0.23 in (5.85 mm)		e4		260 °C (500 °F)	0.295 in (7.5 mm)
TLV3012BIDCKR	Texas Instruments	Comparator		Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy		9 mV	10 pA	Yes	1			3.6 μA			Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08		7 V	0.026 in (0.65 mm)	125 °C (257 °F)	10 pA	2 µs	Push-Pull	-40 °C (-40 °F)	Tin	Dual	R-PDSO-G6	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)		e3			0.079 in (2 mm)
LM339LVQDYYRQ1	Texas Instruments	Comparator		Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		3 mV		Yes	4		AEC-Q100	200 μA			Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.12,20		6 V	0.02 in (0.5 mm)	125 °C (257 °F)		600 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.043 in (1.1 mm)	0.079 in (2 mm)		e4		260 °C (500 °F)	0.165 in (4.2 mm)
TLV3011BIDCKR	Texas Instruments	Comparator		Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy		9 mV	10 pA	Yes	1			3.6 μA			Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08		7 V	0.026 in (0.65 mm)	125 °C (257 °F)	10 pA	2 µs	Open-Drain	-40 °C (-40 °F)	Tin	Dual	R-PDSO-G6	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)		e3			0.079 in (2 mm)
TLV9031QDCKRQ1	Texas Instruments	Comparator		Gull Wing	5	HTSSOP	Rectangular	Plastic/Epoxy		2 mV		Yes	1		AEC-Q100	35 μA			Tape And Reel, 7 Inch	5 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch	TSSOP5/6,.08		6 V	0.026 in (0.65 mm)	125 °C (257 °F)		115 ns	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.049 in (1.25 mm)					0.079 in (2 mm)
TLV3012BIDBVR	Texas Instruments	Comparator		Gull Wing	6	LSSOP	Rectangular	Plastic/Epoxy		9 mV	10 pA	Yes	1			3.6 μA			Tape And Reel	5 V		Small Outline, Low Profile, Shrink Pitch	TSOP6,.11,37		7 V	0.037 in (0.95 mm)	125 °C (257 °F)	10 pA	2 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G6	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)		e4			0.114 in (2.9 mm)
TLV9031DCKR	Texas Instruments	Comparator		Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		2 mV		Yes	1			35 μA			Tape And Reel, 7 Inch	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08		6 V	0.026 in (0.65 mm)	125 °C (257 °F)		115 ns	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.049 in (1.25 mm)					0.079 in (2 mm)
TL514MW	Texas Instruments	Comparator	Military	Flat	14	DFP	Rectangular	Ceramic, Glass-Sealed		3 mV	15 uA	Yes	2	BIPOLAR		18 mA	-6 V			12 V		Flatpack	FL14,.3	Comparators		0.05 in (1.27 mm)	125 °C (257 °F)		30 ns	Totem Pole	-55 °C (-67 °F)		Dual	R-GDFP-F14		0.08 in (2.03 mm)	0.25 in (6.35 mm)	No				0.344 in (8.725 mm)
TLC374CD3	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		6.5 mV		Yes		CMOS		800 μA				5 V	5 V	Small Outline	SOP14,.25	Comparators		0.05 in (1.27 mm)	70 °C (158 °F)	600 pA	650 ns		0 °C (32 °F)		Dual	R-PDSO-G14
TLC393MDR	Texas Instruments	Comparator	Military	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		10 mV	30 nA	Yes	2	CMOS		90 μA				5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	30 nA	2.5 µs	Open-Drain	-55 °C (-67 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
LM311DP3	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		10 mV		Yes		BIPOLAR			-15 V			15 V	±15 V	Small Outline	SOP8,.25	Comparators		0.05 in (1.27 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDSO-G8
LMV339IPWG4	Texas Instruments	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		9 mV	400 nA	Yes	4	BIPOLAR		350 μA				5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	5.5 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	600 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
TLV7044PWR	Texas Instruments	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		8 mV	2 pA	Yes	4			3 μA			Tape And Reel	1.8 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	7 V	0.026 in (0.65 mm)	125 °C (257 °F)	2 pA	3 µs	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)		e4		260 °C (500 °F)	0.197 in (5 mm)
TLV1393IP-00	Texas Instruments	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy		9 mV	-400 nA	No	2	BIPOLAR						3 V		In-Line			7 V	0.1 in (2.54 mm)	105 °C (221 °F)		700 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.386 in (9.81 mm)
TL432MJ	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular	Ceramic				No		BIPOLAR								In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T14				No
TLC339MJB	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular	Ceramic		10 mV		No	4	CMOS	38535Q/M;38534H;883B	175 μA				5 V	5 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)	30 nA	2.5 µs		-55 °C (-67 °F)		Dual	R-XDIP-T14				No
TL820MJB	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular	Ceramic				No		BIPOLAR	38535Q/M;38534H;883B							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T14				No
TLV3404CDRG4	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	0 V	4.4 mV	1.5 nA	Yes	4			3.8 μA	0 V			2.7 V	±1.25/±8/2.5/16 V	Small Outline	SOP14,.25	Comparators	17 V	0.05 in (1.27 mm)	70 °C (158 °F)	250 pA	175 µs	Open-Drain	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
TL811CN	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy				No		BIPOLAR								In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T14				No
TL3016Y	Texas Instruments	Comparator	Commercial	No Lead	8	DIE	Rectangular		-7 V	3 mV	10 uA	Yes	1				-5 V			5 V		Uncased Chip			7 V		70 °C (158 °F)		7.8 µs		0 °C (32 °F)		Upper	R-XUUC-N8				No
LM306N	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy				No	1	BIPOLAR							12,-3/-12 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T14				No
LM306DE4	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-15 V	6.5 mV	40 uA	Yes	1	BIPOLAR		10 mA	-12 V			12 V	12,-3/-12 V	Small Outline	SOP8,.25	Comparators	15 V	0.05 in (1.27 mm)	70 °C (158 °F)		28 ns	Totem Pole	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLC352CDG4	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	6.5 mV	600 pA	Yes	2	CMOS		200 μA	0 V			5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)	600 pA	650 ns	Open-Drain	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
SN72710N	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy				No		BIPOLAR								In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T14				No
PLM2903BIDR	Texas Instruments	Comparator	Automotive	Gull Wing	8	HSOP	Rectangular	Plastic/Epoxy		4 mV	50 nA	Yes	2							5 V		Small Outline, Heat Sink/Slug		Comparators	38 V	0.05 in (1.27 mm)	125 °C (257 °F)		1 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.153 in (3.895 mm)					0.193 in (4.905 mm)
TL721CP3	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy				No		BIPOLAR								In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T8
LM106J/883B	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular	Ceramic				No		BIPOLAR	MIL-STD-883 Class B (Modified)						12,-3/-12 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T14				No
TLC3704MD	Texas Instruments	Comparator	Military	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	-18 V	10 mV	30 nA	Yes	4	CMOS		80 μA			Tape And Reel	5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	30 pA	2.7 µs	Push-Pull	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
LM193MDR	Texas Instruments	Comparator	Military	No Lead		DIE	Rectangular			9 mV	-1 nA	Yes	2	CMOS	MIL-STD-883	1 mA				5 V		Uncased Chip		Comparators	36 V		125 °C (257 °F)	100 nA	5 µs	Open-Collector, Open-Drain	-55 °C (-67 °F)		Upper	R-XUUC-N	1
LM293JG	Texas Instruments	Comparator	Other	Through-Hole	8	DIP	Rectangular	Ceramic, Glass-Sealed		9 mV	400 nA	No	2	BIPOLAR		2.5 mA				5 V	5 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	85 °C (185 °F)	250 nA	1.3 µs	Open-Collector	-25 °C (-13 °F)		Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.378 in (9.6 mm)
TL510CNP3	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy				No		BIPOLAR								In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T14
LM306N3	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy				No	1	BIPOLAR							12,-3/-12 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T14
SN72810N	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy				No		BIPOLAR								In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T14				No
TLC139MJ	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular	Ceramic, Glass-Sealed		10 mV	30 nA	No	4	CMOS		175 μA				5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	30 nA	2.5 µs	Open-Drain	-55 °C (-67 °F)		Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.785 in (19.94 mm)
TLV1391CDBVR	Texas Instruments	Comparator	Commercial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		9 mV	-400 nA	Yes	1	BIPOLAR		125 μA			Tape And Reel	3 V	3/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	7 V	0.037 in (0.95 mm)	70 °C (158 °F)	250 nA	700 ns	Open-Collector	0 °C (32 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)	No	e3		260 °C (500 °F)	0.114 in (2.9 mm)
TLC354CDR	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		6.5 mV	600 pA	Yes	4	CMOS		400 μA				5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)	600 pA	650 ns	Open-Drain	0 °C (32 °F)		Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.341 in (8.65 mm)
5962-9452602VPX	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular	Ceramic, Glass-Sealed	0 V	4 mV	-1 nA	No	2	BIPOLAR	MIL-PRF-38535 Class V	2.5 mA	0 V			5 V		In-Line		Comparators	36 V	0.1 in (2.54 mm)	125 °C (257 °F)		1.3 µs	Open-Collector	-55 °C (-67 °F)		Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	Yes
TLV3704CD	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	0 V	7 mV	1.5 nA	Yes	4	CMOS		3.2 μA	0 V		Tube	2.7 V	±1.25/±8/2.5/16 V	Small Outline	SOP14,.25	Comparators	17 V	0.05 in (1.27 mm)	70 °C (158 °F)	100 pA	240 µs	Push-Pull	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.341 in (8.65 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.