Rectangular Comparators 2,400+

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
TLV3401QD	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	0 V	4.4 mV	1.5 nA	Yes	1				0 V		2.7 V		Small Outline		Comparators	17 V	0.05 in (1.27 mm)	125 °C (257 °F)			Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
TLC393QDRQ1	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		5 mV	30 pA	Yes	2	CMOS	AEC-Q100	40 μA		Tape And Reel	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	30 pA	2.5 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
LMV339PWRLR	Texas Instruments	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		7 mV	400 nA	Yes	4						2.7 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)		400 ns		-40 °C (-40 °F)		Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No				0.197 in (5 mm)
5962-8687801CA	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic, Glass-Sealed	-7 V	2 mV	15 uA	No	2		MIL-STD-883		-6 V		12 V		In-Line		Comparators	14 V		125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-GDIP-T14				No
TLV2352IPWG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		7 mV	2 nA	Yes	2	CMOS		300 μA		Tube	3 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	8 V	0.026 in (0.65 mm)	85 °C (185 °F)	2 nA	640 ns	Open-Drain	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4		260 °C (500 °F)	0.173 in (4.4 mm)
TL710CPP3	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy				No		BIPOLAR							In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T8
LM339DBLE	Texas Instruments	Comparator	Commercial	Gull Wing	14	SSOP	Rectangular		Plastic/Epoxy		9 mV	-400 nA	Yes	4	BIPOLAR		2 mA			5 V	5 V	Small Outline, Shrink Pitch	SSOP14,.3	Comparators	36 V	0.026 in (0.65 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)		Dual	R-PDSO-G14		0.079 in (2 mm)	0.209 in (5.3 mm)	No				0.244 in (6.2 mm)
TLC372QD	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		10 mV	20 nA	Yes	2	CMOS		300 μA		Tube	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	30 pA	650 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLC3704MDRG4	Texas Instruments	Comparator	Military	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy	-18 V	10 mV	30 nA	Yes	4	CMOS		175 μA			5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)		2.7 µs	Push-Pull	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
V62/07646-01XE	Texas Instruments	Comparator	Military	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		5 mV	-400 nA	Yes	2	BIPOLAR		1 mA		Tape And Reel	5 V		Small Outline		Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	50 nA	1.3 µs	Open-Collector	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
LM339N3	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		9 mV		No		BIPOLAR		2 mA			5 V	5 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)		1.3 µs		0 °C (32 °F)		Dual	R-PDIP-T14
TL710MJG	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic				No		BIPOLAR							In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T8				No
TLV3404CDR	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy	0 V	4.4 mV	1.5 nA	Yes	4			2.56 μA	0 V	Tape And Reel	2.7 V	±1.25/±8/2.5/16 V	Small Outline	SOP14,.25	Comparators	17 V	0.05 in (1.27 mm)	70 °C (158 °F)	100 pA	175 µs	Open-Drain	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.341 in (8.65 mm)
5962-9153202QPX	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic, Metal-Sealed Cofired		10 mV	30 nA	No	2	CMOS	MIL-PRF-38535 Class Q	90 μA			5 V		In-Line		Comparators	18 V		125 °C (257 °F)			Push-Pull	-55 °C (-67 °F)	Tin Lead	Dual	R-CDIP-T8				Yes	e0
LM393DB	Texas Instruments	Comparator	Commercial	Gull Wing	8	SSOP	Rectangular		Plastic/Epoxy		9 mV	250 nA	Yes	2			1 mA			5 V		Small Outline, Shrink Pitch		Comparators	36 V	0.026 in (0.65 mm)	70 °C (158 °F)		1.3 µs	Open-Collector	0 °C (32 °F)		Dual	R-PDSO-G8		0.079 in (2 mm)	0.118 in (3 mm)	No				0.209 in (5.3 mm)
TL710MU/883B	Texas Instruments	Comparator	Military	Flat	10	DFP	Rectangular		Ceramic				Yes		BIPOLAR	MIL-STD-883 Class B (Modified)						Flatpack	FL10,.3	Comparators		0.05 in (1.27 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDFP-F10				No
TL712CPWG4	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		1 mV		Yes	1	BIPOLAR		20 mA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	7 V	0.026 in (0.65 mm)	70 °C (158 °F)		25 ns	3-State	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
LM2903JGP4	Texas Instruments	Comparator	Industrial	Through-Hole	8	DIP	Rectangular		Ceramic		15 mV		No		BIPOLAR					5 V	5 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	85 °C (185 °F)				-40 °C (-40 °F)		Dual	R-XDIP-T8
TLC354CPWRG4	Texas Instruments	Comparator	Commercial	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	Yes	4	CMOS		600 μA		Tape And Reel	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)	20 nA	650 ns	Open-Drain	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4		260 °C (500 °F)	0.197 in (5 mm)
TL712CPP3	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy				No		BIPOLAR		20 mA			5 V	5 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T8
TL3116CPWR	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy	-7 V	3 mV	1.2 uA	Yes	1	BIPOLAR		14.7 mA	-5 V	Tape And Reel	5 V	5/±5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	7 V	0.026 in (0.65 mm)	70 °C (158 °F)	1.1 uA	9.9 ns		0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
LMV331QDBVR	Texas Instruments	Comparator	Automotive	Gull Wing	5	LSSOP	Rectangular		Plastic/Epoxy		9 mV	400 nA	Yes	1	BIPOLAR		100 μA			5 V	3/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	5.5 V	0.037 in (0.95 mm)	125 °C (257 °F)	250 nA	450 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.063 in (1.6 mm)	No				0.114 in (2.9 mm)
5962R9679801VCX	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic, Glass-Sealed	-18 V	4 mV	500 nA	No	2	BIPOLAR	MIL-STD-883	11.5 mA	-15 V		15 V		In-Line		Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)		80 ns	Open-Collector	-55 °C (-67 °F)		Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	Yes				0.765 in (19.43 mm)
5962-9554901NXDR	Texas Instruments	Comparator	Military	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		10 mV	20 nA	Yes	2	CMOS	MIL-PRF-38535 Class N	300 μA			5 V		Small Outline		Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	30 pA	650 ns	Open-Collector, Open-Drain	-55 °C (-67 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.193 in (4.9 mm)
V62/04743-01	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		7 mV	250 nA	Yes	4	BIPOLAR					5 V		Small Outline		Comparators	36 V	0.05 in (1.27 mm)	85 °C (185 °F)		1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.91 mm)					0.34 in (8.64 mm)
LM311DE4	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	-18 V	10 mV	300 nA	Yes	1	BIPOLAR		7.5 mA	-15 V	Tube	15 V	±15 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)	250 nA	115 ns	Open-Collector	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.193 in (4.9 mm)
LP239J	Texas Instruments	Comparator	Other	Through-Hole	14	DIP	Rectangular		Ceramic, Glass-Sealed		9 mV	-40 nA	No	4	BIPOLAR		100 μA			5 V	5 V	In-Line	DIP14,.3	Comparators	36 V	0.1 in (2.54 mm)	85 °C (185 °F)	25 nA	1.3 µs	Open-Collector	-25 °C (-13 °F)		Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.77 in (19.56 mm)
TL710CN	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy				No		BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T14				No
TLC352IP	Texas Instruments	Comparator	Industrial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy	0 V	5 mV	2 nA	No	2	CMOS		300 μA	0 V	Tube	5 V	5 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	85 °C (185 °F)	20 nA	650 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e4			0.386 in (9.81 mm)
TLV7021DBVR	Texas Instruments	Comparator	Automotive	Gull Wing	5	LSSOP	Rectangular		Plastic/Epoxy		8 mV	5 pA	Yes	1			10 μA			1.8 V		Small Outline, Low Profile, Shrink Pitch		Comparators	6 V	0.037 in (0.95 mm)	125 °C (257 °F)	5 pA	310 ns	Open-Drain	-40 °C (-40 °F)	Nickel/Palladium/Gold/Silver	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)		e4		260 °C (500 °F)	0.114 in (2.9 mm)
TL820CN3	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy				No		BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T14
LMV339PWR	Texas Instruments	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		7 mV	400 nA	Yes	4	CMOS		350 μA			2.7 V	2.7/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	250 nA	400 ns		-40 °C (-40 °F)		Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No				0.197 in (5 mm)
LM111WGLQMLV	Texas Instruments	Comparator	Military	Gull Wing	10	SOP	Rectangular	50k Rad(Si)	Ceramic, Glass-Sealed	-18 V	4 mV	150 nA	Yes	1	BIPOLAR	MIL-PRF-38535 Class V	6 mA	-15 V		15 V	±15 V	Small Outline	SOP10,.45	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	100 nA	200 ns	Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin Lead	Dual	R-GDSO-G10	1	0.092 in (2.33 mm)	0.241 in (6.12 mm)	No	e0			0.27 in (6.858 mm)
TLV2352IPE4	Texas Instruments	Comparator	Industrial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy		7 mV	2 nA	No	2	CMOS		400 μA			3 V	3/5 V	In-Line	DIP8,.3	Comparators	8 V	0.1 in (2.54 mm)	85 °C (185 °F)	2 nA	640 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e4			0.386 in (9.81 mm)
LM239PW	Texas Instruments	Comparator	Other	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		5 mV	400 nA	Yes	4	BIPOLAR		2 mA		Tube	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	36 V	0.026 in (0.65 mm)	85 °C (185 °F)	250 nA	1.3 µs	Open-Collector	-25 °C (-13 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
LM193MDE	Texas Instruments	Comparator	Military	No Lead		DIE	Rectangular				9 mV	-1 nA	Yes	2	CMOS	MIL-STD-883	1 mA			5 V		Uncased Chip		Comparators	36 V		125 °C (257 °F)	100 nA	5 µs	Open-Collector, Open-Drain	-55 °C (-67 °F)		Upper	R-XUUC-N	1
LM2903VQDR	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		15 mV	-500 nA	Yes	2	BIPOLAR		1 mA		Tape And Reel	5 V	5 V	Small Outline	SOP8,.25	Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	50 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.193 in (4.9 mm)
TLV2393IP	Texas Instruments	Comparator	Industrial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy		9 mV	-400 nA	No	2	BIPOLAR		1.6 mA			3 V	3/5 V	In-Line	DIP8,.3	Comparators	7 V	0.1 in (2.54 mm)	105 °C (221 °F)	250 nA	450 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.386 in (9.81 mm)
LM393JG4	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Ceramic		9 mV		No	2	BIPOLAR					5 V	5 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T8
TLV3701QDRQ1	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		7 mV	2 nA	Yes	1		AEC-Q100				5 V	±1.35/±8/2.7/16 V	Small Outline	SOP8,.25	Comparators	17 V	0.05 in (1.27 mm)	125 °C (257 °F)	250 pA	240 µs	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
TL712CPE4	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy				No	1	BIPOLAR		20 mA			5 V	5 V	In-Line	DIP8,.3	Comparators	7 V	0.1 in (2.54 mm)	70 °C (158 °F)		25 ns	3-State	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDIP-T8	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e4			0.386 in (9.81 mm)
5962-8773901CX	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic, Glass-Sealed	0 V	4 mV	-300 nA	No	4	BIPOLAR	MIL-STD-883	3 mA	0 V		5 V		In-Line		Comparators	36 V	0.1 in (2.54 mm)	125 °C (257 °F)		1.3 µs	Open-Collector	-55 °C (-67 °F)	Tin Lead	Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	Yes	e0			0.77 in (19.56 mm)
LM319JP4	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Ceramic		10 mV		No		BIPOLAR			-15 V		15 V	±15 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T14
TLV3704CDG4	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy	0 V	7 mV	1.5 nA	Yes	4	CMOS		1 μA	0 V		2.7 V	±1.25/±8/2.5/16 V	Small Outline	SOP14,.25	Comparators	17 V	0.05 in (1.27 mm)	70 °C (158 °F)	250 pA	240 µs	Push-Pull	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
TLC139MD	Texas Instruments	Comparator	Military	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		10 mV	30 nA	Yes	4	CMOS		175 μA			5 V		Small Outline			18 V	0.05 in (1.27 mm)	125 °C (257 °F)		2.5 µs	Open-Drain	-55 °C (-67 °F)		Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.341 in (8.65 mm)
TLC354IDG4	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		7 mV	2 nA	Yes	4	CMOS		400 μA			5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	2 nA	650 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
M38510/11201SCX	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic, Metal-Sealed Cofired	-18 V	7 mV	1 nA	No	4						15 V		In-Line		Comparators	18 V		125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-CDIP-T14				No
TLC3702IDG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		7 mV	2 nA	Yes	2	CMOS		40 μA		Tube	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	30 pA	2.7 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.193 in (4.9 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.