Rectangular Comparators 2,400+

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Minimum Isolation Voltage	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
TLV1393IDR	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	9 mV	-400 nA	Yes	2	BIPOLAR		350 μA			3 V	3/5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	105 °C (221 °F)	250 nA	700 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
TL506CJ	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Ceramic			No		BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T14				No
PAMC23C12QDWVRQ1	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy			Yes	1		AEC-Q100	2.2 mA			3.3 V		Small Outline	SOP8,.45		6.5 V	0.05 in (1.27 mm)	125 °C (257 °F)		290 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.11 in (2.8 mm)	0.23 in (5.85 mm)					0.295 in (7.5 mm)
PAMC22C11DR	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		25 nA	Yes	1			2.2 mA		Tape And Reel	3.3 V		Small Outline	SOP8,.25		6.5 V	0.05 in (1.27 mm)	125 °C (257 °F)		240 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.153 in (3.895 mm)					0.193 in (4.905 mm)
PAMC23C11DWVR	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		25 nA	Yes	1			3.7 mA			5 V		Small Outline	SOP8,.45		30 V	0.05 in (1.27 mm)	125 °C (257 °F)		240 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.11 in (2.8 mm)	0.23 in (5.85 mm)					0.295 in (7.5 mm)
PAMC23C12DWVR	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		25 nA	Yes	1			4.3 mA			5 V		Small Outline	SOP8,.45		30 V	0.05 in (1.27 mm)	125 °C (257 °F)		280 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.11 in (2.8 mm)	0.23 in (5.85 mm)					0.295 in (7.5 mm)
5962L9673801VCA	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular	100k Rad(Si)	Ceramic, Glass-Sealed	2.5 mV	1 nA	No	4		MIL-PRF-38535 Class V	2 mA			15 V		In-Line		Comparators	36 V		125 °C (257 °F)	1 nA			-55 °C (-67 °F)		Dual	R-GDIP-T14				Yes
PAMC23C14DWVR	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		25 nA	Yes	2			2.2 mA			3.3 V		Small Outline	SOP8,.45		6.5 V	0.05 in (1.27 mm)	125 °C (257 °F)		280 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.11 in (2.8 mm)	0.23 in (5.85 mm)					0.295 in (7.5 mm)
PAMC23C10DWVR	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		25 nA	Yes	1			3.6 mA		Tape And Reel	3.3 V		Small Outline	SOP8,.45		30 V	0.05 in (1.27 mm)	125 °C (257 °F)		230 ns	Open-Drain, Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.11 in (2.8 mm)	0.23 in (5.85 mm)					0.295 in (7.5 mm)
TLV9022DDFR	Texas Instruments	Comparator		Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy	2 mV		Yes	2			70 μA		Tape And Reel, 7 Inch	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.1		6 V	0.026 in (0.65 mm)	125 °C (257 °F)		150 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.043 in (1.1 mm)	0.063 in (1.6 mm)		e4		260 °C (500 °F)	0.114 in (2.9 mm)
PAMC22C12DR	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		25 nA	Yes	1			2.2 mA		Tape And Reel	3.3 V		Small Outline	SOP8,.25		6.5 V	0.05 in (1.27 mm)	125 °C (257 °F)		280 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.153 in (3.895 mm)					0.193 in (4.905 mm)
PAMC22C12QDRQ1	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		25 nA	Yes	1		AEC-Q100	2.2 mA		Tape And Reel	3.3 V		Small Outline	SOP8,.25		6.5 V	0.05 in (1.27 mm)	125 °C (257 °F)		280 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.153 in (3.895 mm)					0.193 in (4.905 mm)
AMC23C14DWV	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		25 nA	Yes	2			2.2 mA	750 V		3.3 V		Small Outline	SOP8,.45		6.5 V	0.05 in (1.27 mm)	125 °C (257 °F)		280 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	3	0.11 in (2.8 mm)	0.23 in (5.85 mm)		e4		260 °C (500 °F)	0.295 in (7.5 mm)
AMC22C11QDRQ1	Texas Instruments	Comparator			8	SOP	Rectangular		Plastic/Epoxy		25 nA	Yes	1		AEC-Q100	2.2 mA	560 V	Tape And Reel, 13 Inch	3.3 V		Small Outline	SOP8,.25		6.5 V	0.05 in (1.27 mm)	125 °C (257 °F)		240 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	2	0.069 in (1.75 mm)	0.153 in (3.895 mm)		e4		260 °C (500 °F)	0.193 in (4.905 mm)
PAMC22C11QDRQ1	Texas Instruments	Comparator			8	SOP	Rectangular		Plastic/Epoxy		25 nA	Yes	1		AEC-Q100	2.2 mA			3.3 V		Small Outline	SOP8,.25		6.5 V	0.05 in (1.27 mm)	125 °C (257 °F)		240 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.153 in (3.895 mm)					0.193 in (4.905 mm)
AMC23C14DWVR	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		25 nA	Yes	2			2.2 mA	750 V		3.3 V		Small Outline	SOP8,.45		6.5 V	0.05 in (1.27 mm)	125 °C (257 °F)		280 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	3	0.11 in (2.8 mm)	0.23 in (5.85 mm)		e4		260 °C (500 °F)	0.295 in (7.5 mm)
TLV3012AQDBVRQ1	Texas Instruments	Comparator		Gull Wing	6	LSSOP	Rectangular		Plastic/Epoxy	6 mV	10 pA	Yes	1		AEC-Q100	7 μA		Tape And Reel	5 V		Small Outline, Low Profile, Shrink Pitch	TSOP6,.11,37		7 V	0.037 in (0.95 mm)	125 °C (257 °F)	10 pA	12 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G6	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)		e4		260 °C (500 °F)	0.114 in (2.9 mm)
LM2903BTQDRQ1	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	2.5 mV	50 nA	Yes	2		AEC-Q100	800 μA		Tape And Reel	5 V		Small Outline	SOP8,.25		36 V	0.05 in (1.27 mm)	125 °C (257 °F)	25 nA	1 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.153 in (3.895 mm)		e4		260 °C (500 °F)	0.193 in (4.905 mm)
AMC23C12DWV	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		25 nA	Yes	1			4.3 mA	750 V		5 V		Small Outline	SOP8,.45		30 V	0.05 in (1.27 mm)	125 °C (257 °F)		280 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	3	0.11 in (2.8 mm)	0.23 in (5.85 mm)		e4		260 °C (500 °F)	0.295 in (7.5 mm)
LM2903BRQDRQ1	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	2.5 mV	50 nA	Yes	2		AEC-Q100	800 μA		Tape And Reel	5 V		Small Outline	SOP8,.25		36 V	0.05 in (1.27 mm)	125 °C (257 °F)	25 nA	1 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.153 in (3.895 mm)		e4		260 °C (500 °F)	0.193 in (4.905 mm)
AMC23C12DWVR	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		25 nA	Yes	1			4.3 mA	750 V	Tape And Reel	5 V		Small Outline	SOP8,.45		30 V	0.05 in (1.27 mm)	125 °C (257 °F)		280 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	3	0.11 in (2.8 mm)	0.23 in (5.85 mm)		e4		260 °C (500 °F)	0.295 in (7.5 mm)
AMC23C12QDWVRQ1	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		25 nA	Yes	1		AEC-Q100	4.3 mA	750 V	Tape And Reel	3.3 V		Small Outline	SOP8,.45		30 V	0.05 in (1.27 mm)	125 °C (257 °F)		280 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	3	0.11 in (2.8 mm)	0.23 in (5.85 mm)		e4		260 °C (500 °F)	0.295 in (7.5 mm)
AMC23C11DWV	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		25 nA	Yes	1			3.7 mA	750 V		5 V		Small Outline	SOP8,.45		30 V	0.05 in (1.27 mm)	125 °C (257 °F)		240 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	3	0.11 in (2.8 mm)	0.23 in (5.85 mm)		e4		260 °C (500 °F)	0.295 in (7.5 mm)
AMC23C11DWVR	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		25 nA	Yes	1			3.7 mA	750 V	Tape And Reel	5 V		Small Outline	SOP8,.45		30 V	0.05 in (1.27 mm)	125 °C (257 °F)		240 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	3	0.11 in (2.8 mm)	0.23 in (5.85 mm)		e4		260 °C (500 °F)	0.295 in (7.5 mm)
LM2903BHQDRQ1	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	2.5 mV	50 nA	Yes	2		AEC-Q100	800 μA		Tape And Reel	5 V		Small Outline	SOP8,.25		36 V	0.05 in (1.27 mm)	125 °C (257 °F)	25 nA	1 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.153 in (3.895 mm)		e4		260 °C (500 °F)	0.193 in (4.905 mm)
LM2903BTQPWRQ1	Texas Instruments	Comparator		Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy	2.5 mV	50 nA	Yes	2		AEC-Q100	800 μA		Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25		38 V	0.026 in (0.65 mm)	125 °C (257 °F)	25 nA	300 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)		e4		260 °C (500 °F)	0.173 in (4.4 mm)
LM2903BRQPWRQ1	Texas Instruments	Comparator		Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy	2.5 mV	50 nA	Yes	2		AEC-Q100	800 μA		Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25		38 V	0.026 in (0.65 mm)	125 °C (257 °F)	25 nA	300 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)		e4		260 °C (500 °F)	0.173 in (4.4 mm)
LM2903BHQPWRQ1	Texas Instruments	Comparator		Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy	2.5 mV	50 nA	Yes	2		AEC-Q100	800 μA		Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25		38 V	0.026 in (0.65 mm)	125 °C (257 °F)	25 nA	300 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)		e4		260 °C (500 °F)	0.173 in (4.4 mm)
AMC22C12DR	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		25 nA	Yes	1			2.2 mA	560 V	Tape And Reel, 13 Inch	3.3 V		Small Outline	SOP8,.25		6.5 V	0.05 in (1.27 mm)	125 °C (257 °F)		280 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	2	0.069 in (1.75 mm)	0.153 in (3.895 mm)		e4	30 s	260 °C (500 °F)	0.193 in (4.905 mm)
AMC22C12QDRQ1	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		25 nA	Yes	1		AEC-Q100	2.2 mA	560 V	Tape And Reel, 13 Inch	3.3 V		Small Outline	SOP8,.25		6.5 V	0.05 in (1.27 mm)	125 °C (257 °F)		280 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	2	0.069 in (1.75 mm)	0.153 in (3.895 mm)		e4	30 s	260 °C (500 °F)	0.193 in (4.905 mm)
AMC22C11DR	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		25 nA	Yes	1			2.2 mA	560 V	Tape And Reel, 13 Inch	3.3 V		Small Outline	SOP8,.25		6.5 V	0.05 in (1.27 mm)	125 °C (257 °F)		240 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	2	0.069 in (1.75 mm)	0.153 in (3.895 mm)		e4	30 s	260 °C (500 °F)	0.193 in (4.905 mm)
PTLV1822QDRQ1	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	4 mV	1.2 nA	Yes	2		AEC-Q100	20 μA		Tape And Reel	12 V		Small Outline	SOP8,.23		42 V	0.05 in (1.27 mm)	125 °C (257 °F)		450 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.153 in (3.895 mm)					0.193 in (4.905 mm)
TLV3811YBGT	Texas Instruments	Comparator		Ball	6	VFBGA	Rectangular			5 mV	10 uA	Yes	1			23 mA		Tape And Reel	3.3 V		Grid Array, Very Thin Profile, Fine Pitch	BGA6,2X3,16		5.5 V	0.016 in (0.4 mm)	125 °C (257 °F)		0.225 ns		-40 °C (-40 °F)	Tin Silver Copper	Bottom	R-XBGA-B6	1	0.02 in (0.5 mm)	0.032 in (0.818 mm)		e1		260 °C (500 °F)	0.048 in (1.218 mm)
TLV3811YBGR	Texas Instruments	Comparator		Ball	6	VFBGA	Rectangular			5 mV	10 uA	Yes	1			23 mA		Tape And Reel	3.3 V		Grid Array, Very Thin Profile, Fine Pitch	BGA6,2X3,16		5.5 V	0.016 in (0.4 mm)	125 °C (257 °F)		0.225 ns		-40 °C (-40 °F)	Tin Silver Copper	Bottom	R-XBGA-B6	1	0.02 in (0.5 mm)	0.032 in (0.818 mm)		e1		260 °C (500 °F)	0.048 in (1.218 mm)
TLV1822DR	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	4 mV	1.2 nA	Yes	2			10 μA		Tape And Reel	12 V		Small Outline	SOP8,.25		42 V	0.05 in (1.27 mm)	125 °C (257 °F)	1.2 nA	900 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.153 in (3.895 mm)		e4		260 °C (500 °F)	0.193 in (4.905 mm)
TLV1812DR	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	4 mV	1.2 nA	Yes	2			10 μA		Tape And Reel	12 V		Small Outline	SOP8,.25		42 V	0.05 in (1.27 mm)	125 °C (257 °F)	1.2 nA	900 ns	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.153 in (3.895 mm)		e4		260 °C (500 °F)	0.193 in (4.905 mm)
TLV1821DBVR	Texas Instruments	Comparator		Gull Wing	5	LSSOP	Rectangular		Plastic/Epoxy	4 mV	1.2 nA	Yes	1			10 μA		Tape And Reel	12 V		Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37		42 V	0.037 in (0.95 mm)	125 °C (257 °F)	1.2 nA	900 ns	Open-Drain	-40 °C (-40 °F)	Tin	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.063 in (1.6 mm)		e3		260 °C (500 °F)	0.114 in (2.9 mm)
TLV1821LDBVR	Texas Instruments	Comparator		Gull Wing	5	LSSOP	Rectangular		Plastic/Epoxy	4 mV	1.2 nA	Yes	1			10 μA		Tape And Reel	12 V		Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37		42 V	0.037 in (0.95 mm)	125 °C (257 °F)	1.2 nA	900 ns	Open-Drain	-40 °C (-40 °F)	Tin	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.063 in (1.6 mm)		e3		260 °C (500 °F)	0.114 in (2.9 mm)
LM2901BIPWR	Texas Instruments	Comparator		Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy	3.5 mV	50 nA	Yes	4	BIPOLAR		1.6 mA		Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25		38 V	0.026 in (0.65 mm)	125 °C (257 °F)	25 nA	1 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)		e4		260 °C (500 °F)	0.197 in (5 mm)
TLV3811CYBGT	Texas Instruments	Comparator		Ball	6	VFBGA	Rectangular			5 mV	10 uA	Yes	1			23 mA		Tape And Reel	3.3 V		Grid Array, Very Thin Profile, Fine Pitch	BGA6,2X3,16		5.5 V	0.016 in (0.4 mm)	125 °C (257 °F)		0.225 ns		-40 °C (-40 °F)	Tin/Silver/Copper	Bottom	R-XBGA-B6	1	0.02 in (0.5 mm)	0.032 in (0.818 mm)		e1			0.048 in (1.218 mm)
TLV1822QDRQ1	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	4 mV	1.2 nA	Yes	2		AEC-Q100	20 μA		Tape And Reel	12 V		Small Outline	SOP8,.23		42 V	0.05 in (1.27 mm)	125 °C (257 °F)		450 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.153 in (3.895 mm)			30 s	260 °C (500 °F)	0.193 in (4.905 mm)
TLV1812QDRQ1	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	4 mV	1.2 nA	Yes	2		AEC-Q100	20 μA		Tape And Reel	12 V		Small Outline	SOP8,.23		42 V	0.05 in (1.27 mm)	125 °C (257 °F)		420 ns	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.153 in (3.895 mm)			30 s	260 °C (500 °F)	0.193 in (4.905 mm)
PTLV1821QDCKRQ1	Texas Instruments	Comparator		Gull Wing	5	TSSOP	Rectangular		Plastic/Epoxy	4 mV	1.2 nA	Yes	1		AEC-Q100	10 μA		Tape And Reel	12 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08		42 V	0.026 in (0.65 mm)	125 °C (257 °F)		450 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.049 in (1.25 mm)					0.079 in (2 mm)
PL2901BQPW3RQ1	Texas Instruments	Comparator		Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy	5.5 mV	-50 nA	Yes	4	BIPOLAR	AEC-Q100	1.6 mA		Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25		38 V	0.026 in (0.65 mm)	125 °C (257 °F)	-25 nA	1 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)					0.197 in (5 mm)
PTLV1811QDBVRQ1	Texas Instruments	Comparator		Gull Wing	5	LSSOP	Rectangular		Plastic/Epoxy	4 mV	1.2 nA	Yes	1		AEC-Q100	11 μA		Tape And Reel	12 V		Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37		42 V	0.037 in (0.95 mm)	125 °C (257 °F)		420 ns	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.063 in (1.6 mm)					0.114 in (2.9 mm)
TLV3811CYBGR	Texas Instruments	Comparator		Ball	6	VFBGA	Rectangular			5 mV	10 uA	Yes	1			23 mA		Tape And Reel	3.3 V		Grid Array, Very Thin Profile, Fine Pitch	BGA6,2X3,16		5.5 V	0.016 in (0.4 mm)	125 °C (257 °F)		0.225 ns		-40 °C (-40 °F)	Tin/Silver/Copper	Bottom	R-XBGA-B6	1	0.02 in (0.5 mm)	0.032 in (0.818 mm)		e1			0.048 in (1.218 mm)
TLV9030DCKR	Texas Instruments	Comparator		Gull Wing	5	TSSOP	Rectangular		Plastic/Epoxy	2 mV		Yes	1			35 μA		Tape And Reel, 7 Inch	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08		6 V	0.026 in (0.65 mm)	125 °C (257 °F)		115 ns	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)				260 °C (500 °F)	0.079 in (2 mm)
TLV9030QDCKRQ1	Texas Instruments	Comparator		Gull Wing	5	HTSSOP	Rectangular		Plastic/Epoxy	2 mV		Yes	1		AEC-Q100	35 μA		Tape And Reel, 7 Inch	5 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch	TSSOP5/6,.08		6 V	0.026 in (0.65 mm)	125 °C (257 °F)		115 ns	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)				260 °C (500 °F)	0.079 in (2 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.