Rectangular Comparators 2,400+

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
HA1-4902/883	Renesas Electronics	Comparator	Military	Through-Hole	16	DIP	Rectangular	Ceramic, Glass-Sealed		5 mV		No	4	BIPOLAR			-15 V		15 V		In-Line		Comparators			125 °C (257 °F)		200 ns	Totem Pole	-55 °C (-67 °F)	Tin Lead	Dual	R-GDIP-T16				No	e0
HA9P4905-5Z	Renesas Electronics	Comparator	Commercial Extended	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy		10 mV	300 nA	Yes	4				-15 V	Tube	15 V		Small Outline		Comparators	33 V	0.05 in (1.27 mm)	75 °C (167 °F)		180 ns	Open-Drain	0 °C (32 °F)	Matte Tin	Dual	R-PDSO-G16	3	0.104 in (2.65 mm)	0.295 in (7.5 mm)		e3	30 s	260 °C (500 °F)	0.406 in (10.3 mm)
IR2339	Sharp Corporation	Comparator	Other	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy	-18 V	5 mV	250 nA	No	4	BIPOLAR		2 mA				±1/±18/2/36 V	In-Line	DIP14(UNSPEC)	Comparators	18 V	0.1 in (2.54 mm)	85 °C (185 °F)	50 nA	1.3 µs		-30 °C (-22 °F)		Dual	R-PDIP-T14		0.173 in (4.4 mm)	0.3 in (7.62 mm)	No				0.758 in (19.25 mm)
ISL7119RHF/PROTO	Renesas Electronics	Comparator	Military	Flat	10	DFP	Rectangular	Ceramic, Glass-Sealed		8 mV	1 uA	Yes	2						5 V		Flatpack		Comparators		0.05 in (1.27 mm)	125 °C (257 °F)			Open-Collector	-55 °C (-67 °F)	Gold	Dual	R-GDFP-F10		0.115 in (2.92 mm)	0.25 in (6.35 mm)	No	e4			0.29 in (7.37 mm)
LM111WG-SMD	Texas Instruments	Comparator	Military	Gull Wing	10	SOP	Rectangular	Ceramic, Metal-Sealed Cofired	-18 V	4 mV	100 pA	Yes	1	BIPOLAR			-15 V		15 V		Small Outline		Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)			Open-Collector	-55 °C (-67 °F)		Dual	R-CDSO-G10		0.092 in (2.33 mm)	0.241 in (6.12 mm)					0.27 in (6.86 mm)
LM211J-8	National Semiconductor	Comparator	Other	Through-Hole	8	DIP	Rectangular	Ceramic, Glass-Sealed	-18 V	4 mV	150 nA	No	1	BIPOLAR			-15 V		15 V	±15 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	85 °C (185 °F)	100 nA	200 ns	Open-Collector	-25 °C (-13 °F)	Tin Lead	Dual	R-GDIP-T8	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0	40	260 °C (500 °F)	0.38 in (9.652 mm)
LM211J8	Motorola	Comparator	Other	Through-Hole	8	DIP	Rectangular	Ceramic		4 mV		No	1	BIPOLAR			-15 V		15 V	±15 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	85 °C (185 °F)				-25 °C (-13 °F)	Tin/Lead	Dual	R-XDIP-T8				No	e0
LM2903FVT-E2	ROHM	Comparator		Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		5 mV	500 nA	Yes	2			1.5 mA		Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	36 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	1 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)					0.173 in (4.4 mm)
LM3302M96	Intersil	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	0 V	40 mV	1 uA	Yes	4	BIPOLAR			0 V		5 V	5 V	Small Outline	SOP14,.25	Comparators	36 V	0.05 in (1.27 mm)	85 °C (185 °F)		1.3 µs	Open-Collector	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.341 in (8.65 mm)
LM393FV-E2	ROHM	Comparator		Gull Wing	8	LSSOP	Rectangular	Plastic/Epoxy		5 mV	500 nA	Yes	2			1.5 mA		Tape And Reel	5 V		Small Outline, Low Profile, Shrink Pitch	SSOP8,.25	Comparators	36 V	0.026 in (0.65 mm)	85 °C (185 °F)	250 nA	1 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.053 in (1.35 mm)	0.118 in (3 mm)					0.173 in (4.4 mm)
LM393N-A	Philips Semiconductors	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy		9 mV		No	2	BIPOLAR					5 V	5 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)	Tin/Lead	Dual	R-PDIP-T8				No	e0
LM393N/A+	National Semiconductor	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy		9 mV		No	2	BIPOLAR					5 V	5 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)	Tin/Lead	Dual	R-PDIP-T8					e0
LM7211BIM5X	National Semiconductor	Comparator	Industrial	Gull Wing	5	SOP	Rectangular	Plastic/Epoxy		18 mV		Yes	1	CMOS					2.7 V		Small Outline			16 V		85 °C (185 °F)		8 µs	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G5				No
MC3302P	Onsemi	Comparator	Industrial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy	0 V	40 mV	1 uA	No	4	BIPOLAR			0 V		5 V	5 V	In-Line	DIP14,.3	Comparators	30 V	0.1 in (2.54 mm)	85 °C (185 °F)		1.3 µs	Open-Collector	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDIP-T14		0.185 in (4.69 mm)	0.3 in (7.62 mm)	No	e0	30 s	235 °C (455 °F)	0.743 in (18.86 mm)
TA75393F	Toshiba	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	5 mV	250 nA	Yes	2	BIPOLAR		2 mA	0 V		5 V	5 V	Small Outline	SOP8,.25	Comparators	36 V	0.05 in (1.27 mm)	85 °C (185 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8		0.075 in (1.9 mm)	0.173 in (4.4 mm)	No	e0			0.197 in (5 mm)
TC75S56FU(TE85L,F)	Toshiba	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		7 mV		Yes	1	CMOS		22 μA				3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators		0.025 in (0.635 mm)	85 °C (185 °F)		60 ns		-40 °C (-40 °F)		Dual	R-PDSO-G5				No
TC75S57FU(TE85L,F)	Toshiba	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		7 mV		Yes	1	CMOS		220 μA				3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators		0.025 in (0.635 mm)	85 °C (185 °F)		11 ns		-40 °C (-40 °F)		Dual	R-PDSO-G5				No		30 s	260 °C (500 °F)
TC75W59FK(TE85L,F)	Toshiba	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		7 mV		Yes	2	CMOS		440 μA				3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.12,20	Comparators		0.02 in (0.5 mm)	85 °C (185 °F)		170 ns		-40 °C (-40 °F)		Dual	R-PDSO-G8				No
TS9001-1IJ5T	Silicon Labs	Comparator	Industrial	Gull Wing	5	VSSOP	Rectangular	Plastic/Epoxy		10 mV	2 nA	Yes	1						5 V		Small Outline, Very Thin Profile, Shrink Pitch		Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)		5 µs	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.039 in (1 mm)	0.049 in (1.25 mm)					0.079 in (2 mm)
ADCMP354YKSZ-REEL7	Analog Devices	Comparator	Automotive	Gull Wing	4	TSSOP	Rectangular	Plastic/Epoxy				Yes	1			15 μA		Tape And Reel, 7 Inch	3.3 V	2.5/5 V	Small Outline, Thin Profile, Shrink Pitch	SOT-343R	Comparators	6 V		125 °C (257 °F)		30 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G4	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e3		260 °C (500 °F)	0.079 in (2 mm)
CMP01CP	Analog Devices	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-18 V	3.5 mV	900 nA	No	1	BIPOLAR		8.5 mA	-15 V		15 V	5/±15 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)	900 nA	110 ns	Totem Pole	0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T8		0.21 in (5.33 mm)	0.3 in (7.62 mm)	No	e0			0.389 in (9.88 mm)
CMP04FSZ	Analog Devices	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	0 V	2 mV	200 nA	Yes	4	BIPOLAR		3 mA	0 V		5 V	5 V	Small Outline	SOP14,.25	Comparators	36 V	0.05 in (1.27 mm)	85 °C (185 °F)	100 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3		260 °C (500 °F)	0.341 in (8.65 mm)
LTC1440IS8#TRPBF	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		Yes	1	CMOS			0 V	Tape And Reel	3 V		Small Outline		Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)		14 µs		-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.752 mm)	0.154 in (3.899 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9025 mm)
LTC1843IS8#PBF	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		10 mV		Yes	2	CMOS					3 V		Small Outline		Comparators		0.05 in (1.27 mm)	85 °C (185 °F)		5 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
MAX9140EXK-T	Maxim Integrated	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		4.5 mV	320 nA	Yes	1	BIPOLAR		300 μA			5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	320 nA			-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e0			0.079 in (2 mm)
MAX9140EXK+T	Analog Devices	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		4.5 mV	320 nA	Yes	1	BIPOLAR		300 μA			5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	320 nA			-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e3	30 s	260 °C (500 °F)	0.079 in (2 mm)
MCP6544-I/SL	Microchip Technology	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		7 mV	100 pA	Yes	4	CMOS		4 μA		Tube	5 V	1.6/5.5 V	Small Outline	SOP14,.25	Comparators	7 V	0.05 in (1.27 mm)	85 °C (185 °F)		4 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	40	260 °C (500 °F)	0.341 in (8.65 mm)
MCP6544-I/ST	Microchip Technology	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		7 mV	100 pA	Yes	4	CMOS		4 μA		Tube	5 V	1.6/5.5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)		4 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e3	40	260 °C (500 °F)	0.197 in (5 mm)
MCP6544T-I/SL	Microchip Technology	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		7 mV	100 pA	Yes	4	CMOS		4 μA		Tape And Reel	5 V	1.6/5.5 V	Small Outline	SOP14,.25	Comparators	7 V	0.05 in (1.27 mm)	85 °C (185 °F)		4 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	40	260 °C (500 °F)	0.341 in (8.65 mm)
MCP6546UT-E/OT	Microchip Technology	Comparator	Automotive	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		7 mV	5 nA	Yes	1	CMOS	TS 16949	1 μA		Tape And Reel	5 V		Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	7 V	0.037 in (0.95 mm)	125 °C (257 °F)		3 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.061 in (1.55 mm)		e3		260 °C (500 °F)	0.114 in (2.9 mm)
MCP65R46T-1202E/CHY	Microchip Technology	Comparator	Automotive	Gull Wing	6	LSSOP	Rectangular	Plastic/Epoxy		10 mV	5 nA	Yes	1	CMOS	TS 16949	4 μA		Tape And Reel	5 V	2/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP6,.11,37	Comparators	7 V	0.037 in (0.95 mm)	125 °C (257 °F)		4 µs	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G6	1	0.057 in (1.45 mm)	0.061 in (1.55 mm)	No	e4	40	260 °C (500 °F)	0.114 in (2.9 mm)
MIC833YM5-TR	Microchip Technology	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy				Yes	1			2 μA		Tape And Reel	1.6 V		Small Outline, Low Profile, Shrink Pitch	SOP5/6,.11,37	Comparators	7 V	0.037 in (0.95 mm)	85 °C (185 °F)		5 µs	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)		e4		260 °C (500 °F)	0.114 in (2.9 mm)
TL331SN4T3G	Onsemi	Comparator	Automotive	Gull Wing	5	TSOP	Rectangular	Plastic/Epoxy		9 mV	400 nA	Yes	1		AEC-Q100	1.25 mA		Tape And Reel	5 V		Small Outline, Thin Profile	TSOP5/6,.11,37	Comparators	36 V	0.037 in (0.95 mm)	125 °C (257 °F)	250 nA	850 ns	Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.059 in (1.5 mm)		e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
TLC339ID	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		7 mV	2 nA	Yes	4	CMOS		80 μA		Tube	5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	2 pA	2.5 µs	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.341 in (8.65 mm)
TLC3702MD	Texas Instruments	Comparator	Military	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		10 mV	30 nA	Yes	2	CMOS		40 μA		Tube	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	30 pA	2.7 µs	Push-Pull	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLC3702MDG4	Texas Instruments	Comparator	Military	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		10 mV	30 nA	Yes	2	CMOS		40 μA		Tube	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	30 pA	2.7 µs	Push-Pull	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLC3702MDR	Texas Instruments	Comparator	Military	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		10 mV	30 nA	Yes	2	CMOS		40 μA		Tape And Reel	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	30 pA	2.7 µs	Push-Pull	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLV3404IPW	Texas Instruments	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy	0 V	4.4 mV	1.5 nA	Yes	4			2.56 μA	0 V	Tube	5 V	±1.35/±8/2.7/16 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	17 V	0.026 in (0.65 mm)	125 °C (257 °F)	100 pA	175 µs	Open-Drain	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4		260 °C (500 °F)	0.197 in (5 mm)
TS881ILT	STMicroelectronics	Comparator	Automotive	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		6 mV	100 pA	Yes	1					Tape And Reel	1.2 V		Small Outline, Low Profile, Shrink Pitch		Comparators	5.5 V	0.037 in (0.95 mm)	125 °C (257 °F)		6 µs	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.063 in (1.6 mm)					0.114 in (2.9 mm)
UPC277G2-E1-A	Renesas Electronics	Comparator		Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		5 mV	250 nA	Yes	1	BIPOLAR		1 mA			5 V		Small Outline	SOP8,.25	Comparators	36 V	0.05 in (1.27 mm)	85 °C (185 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Tin Bismuth	Dual	R-PDSO-G8		0.071 in (1.8 mm)	0.173 in (4.4 mm)		e6			0.205 in (5.2 mm)
TLC393QDR	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		5 mV	30 nA	Yes	2	CMOS		40 μA		Tape And Reel	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	2 pA	2.5 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
LMV761MAX	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		1 mV	50 pA	Yes	1			700 μA			5 V	2.7/5 V	Small Outline	SOP8,.25	Comparators	5.5 V	0.05 in (1.27 mm)	125 °C (257 °F)	50 pA	225 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	235 °C (455 °F)	0.193 in (4.9 mm)
TLC3704MDR	Texas Instruments	Comparator	Military	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	-18 V	5 mV	30 nA	Yes	4	CMOS		80 μA		Tape And Reel	5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	30 pA	2.7 µs	Push-Pull	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
LMV339IDRG4	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		9 mV	400 nA	Yes	4	BIPOLAR		350 μA			5 V	3/5 V	Small Outline	SOP14,.25	Comparators	5.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	250 nA	600 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
TLC393CPS	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		5 mV	600 pA	Yes	2	CMOS		40 μA			5 V		Small Outline		Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)	2 pA	2.5 µs	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.079 in (2 mm)	0.209 in (5.3 mm)	No	e4	30 s	260 °C (500 °F)	0.244 in (6.2 mm)
5962-9096901MCX	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular	Ceramic, Glass-Sealed		10 mV	30 nA	No	4	CMOS	MIL-STD-883	175 μA			5 V		In-Line		Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)		2.7 µs	Push-Pull	-55 °C (-67 °F)	Tin Lead	Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	Yes	e0			0.77 in (19.56 mm)
SN72306J	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Ceramic				No	1	BIPOLAR						12,-3/-12 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T14				No
UA711CJ4	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Ceramic				No	2	BIPOLAR						12,-6 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T14

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.