Rectangular Comparators 2,400+

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Nominal Bandwidth (3dB)	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
LM193DIE	Texas Instruments	Comparator	Military	No Lead	8	DIE	Rectangular			0 V	9 mV	-300 nA	Yes	2	BIPOLAR			0 V		5 V		Uncased Chip		Comparators	36 V		125 °C (257 °F)		1.3 µs	Open-Collector	-55 °C (-67 °F)		Upper	R-XUUC-N8				No
TLC374QD	Texas Instruments	Comparator	Automotive	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		5 mV	20 nA	Yes	4	CMOS		800 μA			5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	20 nA	650 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No					0.341 in (8.65 mm)
TL811MU/883B	Texas Instruments	Comparator	Military	Flat	10	DFP	Rectangular		Ceramic				Yes		BIPOLAR	MIL-STD-883 Class B (Modified)						Flatpack	FL10,.3	Comparators		0.05 in (1.27 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDFP-F10				No
TL712CDE4	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		5 mV		Yes	1	BIPOLAR		20 mA			5 V	5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	70 °C (158 °F)		25 ns	3-State	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
V62/03638-02XE	Texas Instruments	Comparator	Military	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	-18 V	3 mV	150 nA	Yes	1	BIPOLAR		6 mA	-15 V	Tape And Reel	15 V	±15 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	100 nA	115 ns	Open-Collector, Open-Drain	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
5962R9673802VDX	Texas Instruments	Comparator	Military	Flat	14	DFP	Rectangular	100k Rad(Si)	Ceramic, Glass-Sealed	0 V	4 mV	-1 nA	Yes	4	BIPOLAR	MIL-PRF-38535 Class V		0 V		5 V		Flatpack		Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)			Open-Collector	-55 °C (-67 °F)	Tin Lead	Dual	R-GDFP-F14		0.08 in (2.02 mm)	0.25 in (6.35 mm)	Yes		e0
LM139W	Texas Instruments	Comparator	Military	Flat	14	DFP	Rectangular		Ceramic, Glass-Sealed		9 mV	-300 nA	Yes	4	BIPOLAR		2 mA		Tube	5 V	5 V	Flatpack	FL14,.3	Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	100 nA	1.3 µs	Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin Lead	Dual	R-GDFP-F14		0.08 in (2.03 mm)	0.247 in (6.285 mm)	No		e0			0.363 in (9.21 mm)
LM2903PWG4	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy	0 V	15 mV	-500 nA	Yes	2	BIPOLAR		2.5 mA	0 V		5 V	5/30 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	36 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No		e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
TL432CN	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy				No		BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T14				No
TL3116CPWLE	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy	-7 V	3.5 mV	1.2 uA	Yes	1	BIPOLAR		15 mA	-5 V		5 V	5/±5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	7 V	0.026 in (0.65 mm)	70 °C (158 °F)	1.1 uA	9.9 ns		0 °C (32 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)	No					0.173 in (4.4 mm)
LPV7215MGX	Texas Instruments	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular		Plastic/Epoxy	0 V	2.9 mV		Yes	1	BICMOS			0 V		2.7 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)		15 µs	Push-Pull	-40 °C (-40 °F)	Tin	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No		e3			0.079 in (2 mm)
5962-9555001NXDR	Texas Instruments	Comparator	Military	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		10 mV	30 nA	Yes	4	CMOS	MIL-STD-883	80 μA			5 V		Small Outline		Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	30 pA	2.5 µs	Open-Collector, Open-Drain	-55 °C (-67 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4		260 °C (500 °F)	0.341 in (8.65 mm)
5962-9096901MCA	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic, Glass-Sealed	-18 V	10 mV	30 nA	No	4	CMOS	MIL-STD-883	80 μA		Tube	5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	30 pA	2.7 µs	Push-Pull	-55 °C (-67 °F)	Tin/Lead	Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	Yes		e0			0.77 in (19.56 mm)
TLV7044QPWRQ1	Texas Instruments	Comparator		Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		8 mV		Yes	4		AEC-Q100	3 μA		Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25		7 V	0.026 in (0.65 mm)	125 °C (257 °F)	2 pA	3 µs	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)			e4		260 °C (500 °F)	0.197 in (5 mm)
JL111SZA	Texas Instruments	Comparator	Military	Gull Wing	10	SOP	Rectangular		Ceramic, Glass-Sealed	-30 V	3 mV	100 pA	Yes	1	BIPOLAR	MIL-STD-883		-15 V		15 V		Small Outline		Comparators	30 V	0.05 in (1.27 mm)	125 °C (257 °F)		640 ns	Open-Collector	-55 °C (-67 °F)		Dual	R-GDSO-G10		0.092 in (2.33 mm)	0.241 in (6.12 mm)						0.27 in (6.86 mm)
TLC339CN	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	No	4	CMOS		80 μA		Tube	5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)	2 pA	2.5 µs	Open-Collector	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No		e4			0.76 in (19.305 mm)
5962-01-420-0945	Texas Instruments	Comparator	Industrial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy		15 mV		No		BIPOLAR		2.5 mA				5/30 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	85 °C (185 °F)	250 nA	1.3 µs		-40 °C (-40 °F)		Dual	R-PDIP-T8				No
LMC7225IM5	Texas Instruments	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular		Plastic/Epoxy	0 V	8 mV	1 nA	Yes	1	CMOS		1 μA	0 V	Tape And Reel	2.7 V	2.7/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	10 V	0.038 in (0.953 mm)	85 °C (185 °F)	0.05 pA	22 µs	Open-Drain	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G5	1	0.048 in (1.22 mm)	0.063 in (1.6 mm)	No		e0		260 °C (500 °F)	0.115 in (2.92 mm)
LMC7221BIM5	Texas Instruments	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular		Plastic/Epoxy	0 V	18 mV	0.04 pA	Yes	1	CMOS		14 μA	0 V	Tape And Reel	5 V	2.7/15 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	16 V	0.038 in (0.953 mm)	85 °C (185 °F)	0.4 pA	7 µs	Open-Drain	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G5	1	0.048 in (1.22 mm)	0.063 in (1.6 mm)	No		e0		260 °C (500 °F)	0.115 in (2.92 mm)
LM2903VQDRG4	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		15 mV	-500 nA	Yes	2	BIPOLAR		1 mA		Tape And Reel	5 V	5 V	Small Outline	SOP8,.25	Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	50 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4		260 °C (500 °F)	0.193 in (4.9 mm)
LM393APSE4	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	0 V	4 mV	-400 nA	Yes	2	BIPOLAR			0 V		5 V		Small Outline		Comparators	36 V	0.05 in (1.27 mm)	70 °C (158 °F)		1.3 µs	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.079 in (2 mm)	0.209 in (5.3 mm)	No		e4	30 s	260 °C (500 °F)	0.244 in (6.2 mm)
TLV7211AIDG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	0 V	8 mV		Yes	1	CMOS		14 μA	0 V		5 V	3/15 V	Small Outline	SOP8,.25	Comparators	16 V	0.05 in (1.27 mm)	85 °C (185 °F)		10 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
V62/03672-02XE	Texas Instruments	Comparator	Military	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy	0 V	2.5 mV	-400 nA	Yes	4	BIPOLAR		2 mA	0 V	Tape And Reel	5 V	5 V	Small Outline	SOP14,.25	Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	50 nA	1.3 µs	Open-Collector, Open-Drain	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
LMV339IDG4	Texas Instruments	Comparator	Automotive	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		9 mV	400 nA	Yes	4	BIPOLAR		350 μA			5 V	3/5 V	Small Outline	SOP14,.25	Comparators	5.5 V	0.05 in (1.27 mm)	125 °C (257 °F)	250 nA	600 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
LM311JG4	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed		10 mV	300 nA	No	1	BIPOLAR		7.5 mA	-15 V		15 V	±15 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)		115 ns	Open-Collector, Open-Emitter	0 °C (32 °F)		Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No					0.378 in (9.6 mm)
TLV1391IDBV	Texas Instruments	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular		Plastic/Epoxy		9 mV	-400 nA	Yes	1	BIPOLAR		150 μA			3 V	3/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	7 V	0.037 in (0.95 mm)	85 °C (185 °F)	250 nA	700 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.063 in (1.6 mm)	No					0.114 in (2.9 mm)
TLC371IP	Texas Instruments	Comparator	Industrial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy		7 mV	2 nA	No	1	CMOS		200 μA			5 V	5 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	85 °C (185 °F)	2 nA	650 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No					0.386 in (9.81 mm)
LM339AJ4	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Ceramic		4 mV		No	4	BIPOLAR		2 mA			5 V	5 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)		1.3 µs		0 °C (32 °F)		Dual	R-XDIP-T14
LT1011ACP	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy	-18 V	1.5 mV	50 nA	No	1	BIPOLAR		4 mA	-15 V		15 V	±15 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)	25 nA	150 ns		0 °C (32 °F)		Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No					0.386 in (9.81 mm)
5962-8773901CA	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic, Glass-Sealed		2 mV	25 nA	No	4	BIPOLAR	MIL-STD-883	2 mA		Tube	5 V	5/30 V	In-Line	DIP14,.3	Comparators	36 V	0.1 in (2.54 mm)	125 °C (257 °F)	25 nA	1.3 µs	Open-Collector	-55 °C (-67 °F)	Tin Lead	Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.263 in (6.67 mm)	Yes		e0			0.77 in (19.56 mm)
LM139AN	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		4 mV	-300 nA	No	4	BIPOLAR		2 mA			5 V	5 V	In-Line	DIP14,.3	Comparators	36 V	0.1 in (2.54 mm)	125 °C (257 °F)		1.3 µs	Open-Collector	-55 °C (-67 °F)		Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No					0.76 in (19.305 mm)
TLC374CJ4	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Ceramic		6.5 mV		No		CMOS		800 μA			5 V	5 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)	600 pA	650 ns		0 °C (32 °F)		Dual	R-XDIP-T14
TLC372CPP3	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy				No		CMOS					5 V	5 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T8
INA204AIPWT	Texas Instruments	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		3.5 mV		Yes	2			2.8 mA			12 V	12 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators		0.026 in (0.65 mm)	125 °C (257 °F)	16 uA	1.3 µs		-40 °C (-40 °F)		Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	4.4 MHz				0.197 in (5 mm)
LPV7215MG	Texas Instruments	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular		Plastic/Epoxy	0 V	2.9 mV		Yes	1	BICMOS		1.2 μA	0 V		2.7 V	2/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)		15 µs	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No		e0		260 °C (500 °F)	0.079 in (2 mm)
5962-01-289-9696	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic				No		BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T14				No
LP365AN	Texas Instruments	Comparator	Commercial	Through-Hole	16	DIP	Rectangular		Plastic/Epoxy	-18 V	6 mV	500 nA	No	4	BIPOLAR			-15 V		15 V		In-Line		Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)		1 µs	Open-Collector	0 °C (32 °F)		Dual	R-PDIP-T16		0.2 in (5.08 mm)	0.3 in (7.62 mm)						0.856 in (21.755 mm)
TLC3704CNE4	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy	-18 V	6.5 mV	600 pA	No	4	CMOS		100 μA			5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)	600 pA	2.7 µs	Push-Pull	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No		e4			0.76 in (19.305 mm)
LM3302N	Texas Instruments	Comparator	Industrial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		40 mV	-1 uA	No	4	BIPOLAR		2 mA		Tube	5 V	5 V	In-Line	DIP14,.3	Comparators	28 V	0.1 in (2.54 mm)	85 °C (185 °F)	500 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No		e4			0.76 in (19.305 mm)
UA711MU	Texas Instruments	Comparator	Military	Flat	10	DFP	Rectangular		Ceramic				Yes		BIPOLAR						12,-6 V	Flatpack	FL10,.3	Comparators		0.05 in (1.27 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDFP-F10				No
JM38510/11202BPA	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed		9 mV	-300 nA	No	2	BIPOLAR	MIL-M-38510 Class B	2.5 mA		Tube	5 V	5 V	In-Line	DIP8,.3	Comparators	36 V	0.1 in (2.54 mm)	125 °C (257 °F)	100 nA	1.3 µs	Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin/Lead	Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No		e0			0.377 in (9.58 mm)
TLC339CDR	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	Yes	4	CMOS		80 μA		Tape And Reel	5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)	2 pA	2.5 µs	Open-Collector	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4		260 °C (500 °F)	0.341 in (8.65 mm)
TLC3704CJ	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Ceramic, Glass-Sealed		6.5 mV	600 pA	No	4	CMOS		100 μA			5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)		1.1 µs	Totem Pole	0 °C (32 °F)		Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No					0.77 in (19.56 mm)
TLV3494AIPWT	Texas Instruments	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		15 mV	10 pA	Yes	4	CMOS		4.8 μA		Tape And Reel	5 V	2/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	5.5 V	0.026 in (0.65 mm)	125 °C (257 °F)	10 pA	12 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	2	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		e4		260 °C (500 °F)	0.197 in (5 mm)
TLC339INE4	Texas Instruments	Comparator	Industrial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		7 mV	2 nA	No	4	CMOS		125 μA			5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	85 °C (185 °F)	2 nA	2.5 µs	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No		e4			0.76 in (19.305 mm)
TLC3702QPWRQ1	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		5 mV	30 nA	Yes	2	CMOS	AEC-Q100	40 μA		Tape And Reel	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	125 °C (257 °F)	30 pA	4.5 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	3	0.047 in (1.2 mm)	0.118 in (3 mm)	No		e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
TL714CD	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		10 mV	600 uA	Yes	1	BIPOLAR		12 mA		Tube	5 V	5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	70 °C (158 °F)	600 uA	6 ns	Push-Pull	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TL3116CDG4	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	-7 V	3.5 mV	1.2 uA	Yes	1	BIPOLAR		15 mA	-5 V		5 V	5/±5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	70 °C (158 °F)	1.1 uA	9.9 ns		0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.