Rectangular Comparators 2,400+

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
MCP6541UT-I/LT	Microchip Technology	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		7 mV	1 pA	Yes	1	CMOS		1 μA		Tape And Reel	5 V	1.6/5.5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)		4 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e3	40	260 °C (500 °F)	0.079 in (2 mm)
NCS2200SQ2T2G	Onsemi	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	8 mV	10 nA	Yes	1	CMOS		17 μA	0 V	Tape And Reel	3 V	1/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	105 °C (221 °F)		1.1 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e3	40	260 °C (500 °F)	0.079 in (2 mm)
NCX2202GM,115	NXP Semiconductors	Comparator	Industrial	No Lead	6	VSON	Rectangular	Plastic/Epoxy		30 mV		Yes	1			9 μA		Tape And Reel, 7 Inch	1.6 V	1.6/5.5 V	Small Outline, Very Think Profile	SOLCC6,.04,20	Comparators	7 V	0.02 in (0.5 mm)	85 °C (185 °F)		800 ns	Open-Drain	-40 °C (-40 °F)	Tin	Dual	R-PDSO-N6	1	0.02 in (0.5 mm)	0.039 in (1 mm)	No	e3	30 s	260 °C (500 °F)	0.057 in (1.45 mm)
TLC339IPWR	Texas Instruments	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		7 mV	2 nA	Yes	4	CMOS		80 μA		Tape And Reel	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	85 °C (185 °F)	2 pA	2.5 µs	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4		260 °C (500 °F)	0.197 in (5 mm)
TLC339MDG4	Texas Instruments	Comparator	Military	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		10 mV	30 nA	Yes	4	CMOS		80 μA		Tape And Reel	5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	2 pA	2.5 µs	Open-Collector	-55 °C (-67 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.341 in (8.65 mm)
TLC3704ID	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	-18 V	7 mV	2 nA	Yes	4	CMOS		80 μA		Tube	5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	30 pA	2.7 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.341 in (8.65 mm)
TLC3704IN	Texas Instruments	Comparator	Industrial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy	-18 V	7 mV	2 nA	No	4	CMOS		80 μA		Tube	5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	85 °C (185 °F)	30 pA	2.7 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e4			0.76 in (19.305 mm)
TLC372CPWRG4	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		6.5 mV	600 pA	Yes	2	CMOS		300 μA		Tape And Reel	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)	30 pA	650 ns	Open-Drain	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4		260 °C (500 °F)	0.173 in (4.4 mm)
TLC374IDR	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		7 mV	2 nA	Yes	4	CMOS		600 μA		Tape And Reel	5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	30 pA	650 ns	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.341 in (8.65 mm)
TLV1701AIDRLR	Texas Instruments	Comparator	Automotive	Flat	5	VSOF	Rectangular	Plastic/Epoxy		5.5 mV	20 uA	Yes	1	BIPOLAR		75 μA					Small Outline, Very Think Profile		Comparators	40 V	0.02 in (0.5 mm)	125 °C (257 °F)	15 nA	560 ns	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold/Silver	Dual	R-PDSO-F5	1	0.024 in (0.6 mm)	0.047 in (1.2 mm)		e4	30 s	260 °C (500 °F)	0.063 in (1.6 mm)
TLV2352IPWRG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		7 mV	2 nA	Yes	2	CMOS		400 μA			3 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	8 V	0.026 in (0.65 mm)	85 °C (185 °F)	2 nA	640 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
TLV9022QDRQ1	Texas Instruments	Comparator	Automotive	Gull Wing	8	HSOP	Rectangular	Plastic/Epoxy		2 mV		Yes	2		AEC-Q100	70 μA		Tape And Reel, 13 Inch	5 V		Small Outline, Heat Sink/Slug	SOP8,.25		6 V	0.05 in (1.27 mm)	125 °C (257 °F)		150 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.153 in (3.895 mm)		e4	30 s	260 °C (500 °F)	0.193 in (4.905 mm)
LM193JG	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular	Ceramic, Glass-Sealed		9 mV	-300 nA	No	2	BIPOLAR	MIL-STD-883	2.5 mA		Tube	5 V	5/30 V	In-Line	DIP8,.3	Comparators	36 V	0.1 in (2.54 mm)	125 °C (257 °F)	100 nA	1.3 µs	Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin/Lead	Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0			0.377 in (9.58 mm)
LM211PE4	Texas Instruments	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-18 V	4 mV	150 nA	No	1	BIPOLAR		6 mA	-15 V	Tube	15 V	±15 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	85 °C (185 °F)	100 nA	115 ns	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e4			0.378 in (9.59 mm)
LM2903VQPWR	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		15 mV	-500 nA	Yes	2	BIPOLAR		1 mA		Tape And Reel	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	36 V	0.026 in (0.65 mm)	125 °C (257 °F)	50 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4		260 °C (500 °F)	0.173 in (4.4 mm)
LM311PWLE	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy	-18 V	10 mV	300 nA	Yes	1	BIPOLAR			-15 V		15 V	±15 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)	250 nA	115 ns	Open-Collector, Open-Emitter	0 °C (32 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)	No				0.173 in (4.4 mm)
LM393LVQDDFRQ1	Texas Instruments	Comparator		Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		3 mV		Yes	2		AEC-Q100	100 μA		Tape And Reel, 7 Inch	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.1		6 V	0.026 in (0.65 mm)	125 °C (257 °F)		600 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.043 in (1.1 mm)	0.063 in (1.6 mm)		e4		260 °C (500 °F)	0.114 in (2.9 mm)
LMV393IPWRG4	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		9 mV	400 nA	Yes	2	BIPOLAR		300 μA		Tape And Reel	5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	5.5 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	600 ns	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4		260 °C (500 °F)	0.173 in (4.4 mm)
LP339M	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	0 V	5 mV	25 nA	Yes	4	BIPOLAR		100 μA	0 V	Tube	5 V	5 V	Small Outline	SOP14,.25	Comparators	36 V	0.05 in (1.27 mm)	70 °C (158 °F)	25 nA	8 µs	Open-Collector	0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	235 °C (455 °F)	0.341 in (8.65 mm)
LT1712CGN#TR	Analog Devices	Comparator	Commercial	Gull Wing	16	SSOP	Rectangular	Plastic/Epoxy	-6.3 V	6 mV	10 uA	Yes	2				-5 V	Tape And Reel	5 V		Small Outline, Shrink Pitch		Comparators	6.3 V	0.025 in (0.635 mm)	70 °C (158 °F)		5.5 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9116 mm)	No	e0			0.193 in (4.9 mm)
LT1719IS8#TR	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V	3.5 mV	0 uA	Yes	1	BIPOLAR			-5 V	Tape And Reel	5 V		Small Outline		Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)		7 ns	Open-Emitter	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.752 mm)	0.154 in (3.899 mm)	No	e0			0.193 in (4.9025 mm)
MAX9021AUK-T	Maxim Integrated	Comparator	Automotive	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy	0 V	8 mV	80 nA	Yes	1			5 μA	0 V		5 V	±1.25/±2.75/2.5/5.5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	125 °C (257 °F)		8 µs		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e0			0.114 in (2.9 mm)
MAX9021AUK+T	Analog Devices	Comparator	Automotive	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy	0 V	8 mV	80 nA	Yes	1			5 μA	0 V		5 V	±1.25/±2.75/2.5/5.5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	125 °C (257 °F)	80 nA	8 µs		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
MCP6541-I/P	Microchip Technology	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy		7 mV	100 pA	No	1	CMOS		1 μA		Tube	5 V	1.6/5.5 V	In-Line	DIP8,.3	Comparators	7 V	0.1 in (2.54 mm)	85 °C (185 °F)		4 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDIP-T8		0.21 in (5.334 mm)	0.3 in (7.62 mm)	No	e3			0.365 in (9.271 mm)
MIC841NYC5-T5	Microchip Technology	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy				Yes	1	CMOS	TS 16949	3 μA		Tape And Reel	1.5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)		12 µs	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)		e4		260 °C (500 °F)	0.08 in (2.02 mm)
NCS2250SQ2T2G	Onsemi	Comparator	Automotive	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		6 mV	1 nA	Yes	1			250 μA		Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)		90 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)		e3	30 s	260 °C (500 °F)	0.079 in (2 mm)
PLM393BIDDFR	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		2 mV	25 nA	Yes	2	BIPOLAR		800 μA		Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.1		38 V	0.026 in (0.65 mm)	85 °C (185 °F)	25 nA	1 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.043 in (1.1 mm)	0.063 in (1.6 mm)					0.114 in (2.9 mm)
TLC3704IPWG4	Texas Instruments	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy	-18 V	7 mV	2 nA	Yes	4	CMOS		125 μA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	85 °C (185 °F)		2.7 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
TLV3601QDBVRQ1	Texas Instruments	Comparator		Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		5 mV	5 uA	Yes	1		AEC-Q100	7 mA		Tape And Reel	2.5 V		Small Outline, Thin Profile, Shrink Pitch	TSOP5/6,.08		6 V	0.026 in (0.65 mm)	125 °C (257 °F)	5 uA	2.5 ns	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)		e4	30 s	260 °C (500 °F)	0.079 in (2 mm)
TLV3704IPWR	Texas Instruments	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy	0 V	7 mV	1.5 nA	Yes	4	CMOS		3.2 μA	0 V	Tape And Reel	5 V	±1.35/±8/2.7/16 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	17 V	0.026 in (0.65 mm)	125 °C (257 °F)	100 pA	240 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4		260 °C (500 °F)	0.197 in (5 mm)
TLV3704IPWRG4	Texas Instruments	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy	0 V	7 mV	1.5 nA	Yes	4	CMOS		3.2 μA	0 V	Tape And Reel	5 V	±1.35/±8/2.7/16 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	17 V	0.026 in (0.65 mm)	125 °C (257 °F)	100 pA	240 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4		260 °C (500 °F)	0.197 in (5 mm)
TLV7041DBVR	Texas Instruments	Comparator	Automotive	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		8 mV	2 pA	Yes	1			900 nA			5 V		Small Outline, Low Profile, Shrink Pitch		Comparators	7 V	0.037 in (0.95 mm)	125 °C (257 °F)	2 pA	3 ns	Open-Drain	-40 °C (-40 °F)	Nickel/Palladium/Gold/Silver	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)		e4		260 °C (500 °F)	0.114 in (2.9 mm)
TLV9032QDRQ1	Texas Instruments	Comparator	Automotive	Gull Wing	8	HSOP	Rectangular	Plastic/Epoxy		2 mV		Yes	2		AEC-Q100	70 μA		Tape And Reel, 13 Inch	5 V		Small Outline, Heat Sink/Slug	SOP8,.25		6 V	0.05 in (1.27 mm)	125 °C (257 °F)		115 ns	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.153 in (3.895 mm)		e4	30 s	260 °C (500 °F)	0.193 in (4.905 mm)
LMV393ID	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		9 mV	400 nA	Yes	2	BIPOLAR		300 μA		Tube	5 V	3/5 V	Small Outline	SOP8,.25	Comparators	5.5 V	0.05 in (1.27 mm)	125 °C (257 °F)	250 nA	600 ns	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.193 in (4.9 mm)
LMV7291MGX/NOPB	Texas Instruments	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	6 mV	100 nA	Yes	1	BICMOS		14 μA	0 V	Tape And Reel	1.8 V	1.8/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	100 nA	1.8 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e3		260 °C (500 °F)	0.079 in (2 mm)
TLC393IPWR	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		5 mV	2 nA	Yes	2	CMOS		40 μA		Tape And Reel	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	85 °C (185 °F)	2 pA	2.5 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
TLV6713DDCT	Texas Instruments	Comparator	Automotive	Gull Wing	6	TSOP	Rectangular	Plastic/Epoxy		2 mV	25 nA	Yes	1			11 μA			12 V		Small Outline, Thin Profile		Comparators	40 V	0.037 in (0.95 mm)	125 °C (257 °F)	25 nA	28.1 µs	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G6	2	0.043 in (1.1 mm)	0.063 in (1.6 mm)		e4	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
TLV9024QPWRQ1	Texas Instruments	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		2 mV		Yes	4		AEC-Q100	140 μA		Tape And Reel, 13 Inch	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)		150 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)		e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
TLV9032QPWRQ1	Texas Instruments	Comparator		Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		2 mV		Yes	2		AEC-Q100	70 μA			5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25		6 V	0.026 in (0.65 mm)	125 °C (257 °F)		115 ns	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)		e4		260 °C (500 °F)	0.173 in (4.4 mm)
LM119J-QMLV	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular	Ceramic, Glass-Sealed	-18 V	3.8 mV	475 nA	No	2	BIPOLAR	MIL-PRF-38535 Class V	11 mA	-15 V	Tube	15 V	±15 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	500 nA	80 ns	Open-Collector	-55 °C (-67 °F)	Tin/Lead	Dual	R-GDIP-T14	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0			0.765 in (19.43 mm)
LM239AMPWREP	Texas Instruments	Comparator	Military	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy	0 V	2.5 mV	-400 nA	Yes	4	BIPOLAR		2 mA	0 V	Tape And Reel	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	36 V	0.026 in (0.65 mm)	125 °C (257 °F)	50 nA	1.3 µs	Open-Collector, Open-Drain	-55 °C (-67 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4		260 °C (500 °F)	0.197 in (5 mm)
LM239DRE4	Texas Instruments	Comparator	Other	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		9 mV	400 nA	Yes	4	BIPOLAR		2 mA			5 V	5 V	Small Outline	SOP14,.25	Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)		1.3 µs	Open-Collector	-25 °C (-13 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
LM2901ND	Motorola	Comparator	Industrial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy		15 mV		No		BIPOLAR		2.5 mA			5 V	5 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	85 °C (185 °F)		1.3 µs		-40 °C (-40 °F)	Tin/Lead	Dual	R-PDIP-T14					e0
LM2903QD	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		15 mV	-500 nA	Yes	2	BIPOLAR		1 mA		Tape And Reel	5 V	5/30 V	Small Outline	SOP8,.25	Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	50 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.193 in (4.9 mm)
LM339BIPWR	Texas Instruments	Comparator		Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		3.5 mV	50 nA	Yes	4	BIPOLAR		1.6 mA		Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25		38 V	0.026 in (0.65 mm)	70 °C (158 °F)	25 nA	1 µs	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)		e4		260 °C (500 °F)	0.197 in (5 mm)
MAX9019EKA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	LSSOP	Rectangular	Plastic/Epoxy		10 mV	2 nA	Yes	2	BICMOS		2 μA			5 V	5 V	Small Outline, Low Profile, Shrink Pitch	TSSOP8,.1	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	1 nA	28 µs	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e0	20 s	240 °C (464 °F)	0.114 in (2.9 mm)
MAX9019EKA+T	Analog Devices	Comparator	Industrial	Gull Wing	8	LSSOP	Rectangular	Plastic/Epoxy		10 mV	2 nA	Yes	2	BICMOS		2 μA			5 V	5 V	Small Outline, Low Profile, Shrink Pitch	TSSOP8,.1	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	1 nA	28 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
MAX975ESA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		3 mV	-300 nA	Yes	1	CMOS		500 μA			5 V	3/5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 nA	28 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	240 °C (464 °F)	0.193 in (4.9 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.