Square Comparators 1,068

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
LM393DP	NXP Semiconductors	Comparator	Commercial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	0 V	9 mV	400 nA	Yes	2	BIPOLAR	2.5 mA	0 V		5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	32 V	0.026 in (0.65 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)		Dual	S-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)	No				0.118 in (3 mm)
NCX2200GF3	NXP Semiconductors	Comparator	Industrial	No Lead	6	VSON	Square	Plastic/Epoxy		30 mV		Yes	1					3 V		Small Outline, Very Think Profile		Comparators	7 V	0.014 in (0.35 mm)	85 °C (185 °F)		800 ns		-40 °C (-40 °F)	Pure Tin	Dual	S-PDSO-N6	1	0.02 in (0.5 mm)	0.039 in (1 mm)	No				0.039 in (1 mm)
NCX2222DP	NXP Semiconductors	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		30 mV		Yes	2					3 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)		800 ns	Open-Drain	-40 °C (-40 °F)		Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)					0.118 in (3 mm)
NCX2220GM	NXP Semiconductors	Comparator	Industrial	Butt	8	BCC	Square	Plastic/Epoxy		30 mV		Yes	1			0 V		3 V		Chip Carrier			7 V	0.022 in (0.55 mm)	85 °C (185 °F)		10 ns		-40 °C (-40 °F)		Bottom	S-PBCC-B8	1	0.02 in (0.5 mm)	0.063 in (1.6 mm)	No				0.063 in (1.6 mm)
NCX2200GS	NXP Semiconductors	Comparator	Industrial	Butt	6	BCC	Square			30 mV		Yes	1					3 V		Chip Carrier		Comparators	7 V	0.014 in (0.35 mm)	85 °C (185 °F)		800 ns	Push-Pull	-40 °C (-40 °F)		Bottom	S-XBCC-B6		0.014 in (0.35 mm)	0.039 in (1 mm)					0.039 in (1 mm)
LM2903DP	NXP Semiconductors	Comparator	Automotive	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	0 V	15 mV	500 nA	Yes	2	BIPOLAR	2.5 mA	0 V		5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	32 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	S-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)	No				0.118 in (3 mm)
NCX2200GS,125	NXP Semiconductors	Comparator	Industrial	Butt	6	BCC	Square			30 mV		Yes	1					3 V		Chip Carrier		Comparators	7 V	0.014 in (0.35 mm)	85 °C (185 °F)		800 ns	Push-Pull	-40 °C (-40 °F)		Bottom	S-XBCC-B6		0.014 in (0.35 mm)	0.039 in (1 mm)					0.039 in (1 mm)
NCX2222GM	NXP Semiconductors	Comparator	Industrial	Butt	8	VBCC	Square	Plastic/Epoxy		30 mV		Yes	2					3 V		Chip Carrier, Very Thin Profile		Comparators	7 V	0.02 in (0.5 mm)	85 °C (185 °F)		800 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Bottom	S-PBCC-B8	1	0.02 in (0.5 mm)	0.063 in (1.6 mm)		e4			0.063 in (1.6 mm)
935294508125	NXP Semiconductors	Comparator	Industrial	No Lead	8	VQCCN	Square	Plastic/Epoxy		30 mV		Yes	1			0 V		3 V		Chip Carrier, Very Thin Profile		Comparators	7 V	0.022 in (0.55 mm)	85 °C (185 °F)		10 ns		-40 °C (-40 °F)		Quad	S-PQCC-N8		0.02 in (0.5 mm)	0.063 in (1.6 mm)					0.063 in (1.6 mm)
935295655132	NXP Semiconductors	Comparator	Industrial	No Lead	6	VSON	Square	Plastic/Epoxy		30 mV		Yes	1					3 V		Small Outline, Very Think Profile		Comparators	7 V	0.014 in (0.35 mm)	85 °C (185 °F)		800 ns		-40 °C (-40 °F)	Tin	Dual	S-PDSO-N6		0.02 in (0.5 mm)	0.039 in (1 mm)		e3			0.039 in (1 mm)
AZV393MM-G1	Diodes Incorporated	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		9 mV	400 nA	Yes	2	BICMOS	250 μA			2.7 V	2.7/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	250 nA	1 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
APX393M8G-13	Diodes Incorporated	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		7 mV	400 nA	Yes	2	CMOS	250 μA			2.7 V	2.7/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	400 nA	700 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-G8	3	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
AP393AM8G-13	Diodes Incorporated	Comparator	Commercial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		9 mV	500 nA	Yes	2	BIPOLAR	2.5 mA			5 V	±1/±18/2/36 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	40 V	0.026 in (0.65 mm)	70 °C (158 °F)	400 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Matte Tin	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
AS393MM-G1	Diodes Incorporated	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		7 mV	400 nA	Yes	2	BIPOLAR	3 mA			5 V	±1/±18/2/36 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	40 V	0.026 in (0.65 mm)	85 °C (185 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	S-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)	No				0.118 in (3 mm)
AZV393MMTR-E1	Diodes Incorporated	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		9 mV	400 nA	Yes	2	BICMOS	250 μA		Tape And Reel	2.7 V	2.7/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	250 nA	1 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
AZV3002RL-7	Diodes Incorporated	Comparator	Industrial	Butt	8	VFLGA	Square			30 mV		Yes	2					3 V		Grid Array, Very Thin Profile, Fine Pitch		Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)		800 ns	Push-Pull	-40 °C (-40 °F)		Bottom	S-XBGA-B8		0.022 in (0.55 mm)	0.063 in (1.6 mm)				260 °C (500 °F)	0.063 in (1.6 mm)
LM2901M8-13	Diodes Incorporated	Comparator	Automotive	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		4 mV	500 nA	Yes	2					5 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	36 V	0.026 in (0.65 mm)	125 °C (257 °F)		1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	S-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)			30 s	260 °C (500 °F)	0.118 in (3 mm)
APX393M8G-U	Diodes Incorporated	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	0 V	9 mV	400 nA	Yes	2	CMOS	250 μA	0 V		5 V	2.7/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	400 nA	600 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	40	260 °C (500 °F)	0.118 in (3 mm)
AZV393MMTR-G1	Diodes Incorporated	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		9 mV	400 nA	Yes	2	BICMOS	250 μA		Tape And Reel	2.7 V	2.7/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	250 nA	1 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
AP393AM8G-U	Diodes Incorporated	Comparator	Commercial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		8 mV	300 nA	Yes	2	BIPOLAR	2.5 mA			5 V	±1/±18/2/36 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	40 V	0.026 in (0.65 mm)	70 °C (158 °F)	300 nA	300 ns	Open-Collector	0 °C (32 °F)	Matte Tin	Dual	S-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	40	260 °C (500 °F)	0.118 in (3 mm)
AS393MMTR-G1	Diodes Incorporated	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		7 mV	400 nA	Yes	2	BIPOLAR	3 mA		Tape And Reel	5 V	±1/±18/2/36 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	40 V	0.026 in (0.65 mm)	85 °C (185 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-G8	3	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
LM2901AM8-13	Diodes Incorporated	Comparator	Automotive	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		15 mV	500 nA	Yes	2					5 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	36 V	0.026 in (0.65 mm)	125 °C (257 °F)		1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	S-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)			30 s	260 °C (500 °F)	0.118 in (3 mm)
AZV393MM-E1	Diodes Incorporated	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		9 mV	400 nA	Yes	2	BICMOS	250 μA			2.7 V	2.7/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	250 nA	1 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX9043BEUB	Maxim Integrated	Comparator	Industrial	Gull Wing	10	TSSOP	Square	Plastic/Epoxy		9 mV	25 nA	Yes	2					5 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)		450 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G10	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0			0.118 in (3 mm)
MAX9973GCCB+TD	Maxim Integrated	Comparator	Commercial	Gull Wing	64	HTFQFP	Square	Plastic/Epoxy	-6 V	50 mV		Yes	1	BICMOS		-4.75 V		9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			11 V	0.02 in (0.5 mm)	70 °C (158 °F)		1.2 ns	Open-Collector	0 °C (32 °F)	Matte Tin	Quad	S-PQFP-G64	3	0.047 in (1.2 mm)	0.394 in (10 mm)	No	e3			0.394 in (10 mm)
MAX9967ALCCQ-TD	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	20 mV	25 uA	Yes	2	BIPOLAR		-5.25 V		9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100		0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX9053AEUA	Maxim Integrated	Comparator	Industrial	Gull Wing	10	TSSOP	Square	Plastic/Epoxy		7 mV	10 nA	Yes	2		85 μA			5 V	2.7/5.5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP10,.19,20	Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)	10 nA	450 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G10	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0			0.118 in (3 mm)
MAX913EUA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	-7 V	3 mV	8 uA	Yes	1	BIPOLAR	10 mA	-5 V		5 V	5/±5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)	5 uA	10 ns		-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0		245 °C (473 °F)	0.118 in (3 mm)
MAX973CUA	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Square	Plastic/Epoxy	0 V	10 mV		Yes	2		5.8 μA	0 V		3 V	±1.25/±5.5/2.5/11 V	Small Outline	TSSOP8,.19	Comparators	12 V	0.025 in (0.635 mm)	70 °C (158 °F)		300 µs	Open-Drain	0 °C (32 °F)	Tin Lead	Dual	S-PDSO-G8	1			No	e0
MAX913EUA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	-7 V	3 mV	8 uA	Yes	1	BIPOLAR	10 mA	-5 V		5 V	5/±5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)	5 uA	10 ns		-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0			0.118 in (3 mm)
MAX922CUA-T	Maxim Integrated	Comparator	Commercial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	-0.3 V	10 mV		Yes	2	CMOS	4 μA			3 V	±1.25/±5.5/2.5/11 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	12 V	0.026 in (0.65 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)	Tin Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0			0.118 in (3 mm)
MAX9961BLCCQ-D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	2	BIPOLAR		-5.25 V		9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX9012EUA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		5.5 mV	2 uA	Yes	2	BIPOLAR	4.2 mA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	2 uA	5.5 ns		-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0		245 °C (473 °F)	0.118 in (3 mm)
MAX9965BGCCQ+D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	4	BIPOLAR		-5.25 V		9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		1.2 ns	Open-Collector	0 °C (32 °F)	Matte Tin	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e3			0.551 in (14 mm)
MAX9967BMCCQ+TD	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	2	BIPOLAR		-5.25 V		9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Emitter	0 °C (32 °F)	Matte Tin	Quad	S-PQFP-G100		0.047 in (1.2 mm)	0.551 in (14 mm)	No	e3			0.551 in (14 mm)
MAX9052AEUA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		7 mV	10 nA	Yes	2					5 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)		450 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0			0.118 in (3 mm)
MAX9965BJCCQ+D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	4	BIPOLAR		-5.25 V		9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		1.2 ns	Open-Emitter	0 °C (32 °F)	Matte Tin	Quad	S-PQFP-G100		0.047 in (1.2 mm)	0.551 in (14 mm)	No	e3			0.551 in (14 mm)
MAX9967BRCCQ-D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	2	BIPOLAR		-5.25 V		9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX9961ADCCQ-TD	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	20 mV	25 uA	Yes	2	BIPOLAR		-5.25 V		9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100		0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX9966BGCCQ+D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	4	BIPOLAR		-5.25 V		9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		1.2 ns	Open-Collector	0 °C (32 °F)	Matte Tin	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e3			0.551 in (14 mm)
MAX9967ADCCQ-TD	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	20 mV	25 uA	Yes	2	BIPOLAR		-5.25 V		9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100		0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX9043BEUB-T	Maxim Integrated	Comparator	Industrial	Gull Wing	10	TSSOP	Square	Plastic/Epoxy		9 mV	25 nA	Yes	2	BIPOLAR	130 μA			5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP10,.19,20	Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)	25 nA	450 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G10	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0			0.118 in (3 mm)
MAX9964BGCCQ	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	4	BIPOLAR		-5.25 V		9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX942EUA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		5.5 mV	400 nA	Yes	2	BIPOLAR	1.2 mA			3 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	400 nA	80 ns		-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0		245 °C (473 °F)	0.118 in (3 mm)
MAX989EUA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	0 V	7 mV	10 nA	Yes	2	CMOS	48 μA	0 V		5 V	±1.5/±2.5/3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	10 nA	300 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0		245 °C (473 °F)	0.118 in (3 mm)
LMX393HAUA	Maxim Integrated	Comparator	Automotive	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		7 mV	400 nA	Yes	2	CMOS	300 μA			2.7 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	500 ns	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0		245 °C (473 °F)	0.118 in (3 mm)
MAX9967BGCCQ	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	2	BIPOLAR		-5.25 V		9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX9052BEUA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		9 mV	25 nA	Yes	2	BIPOLAR	130 μA			5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	25 nA	450 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0			0.118 in (3 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.