Square Comparators 1,068

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Minimum Isolation Voltage Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Sub-Category Nominal Slow Rate Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Nominal Response Time Output Type Minimum Operating Temperature Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

LM2903DGKR

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

15 mV

-500 nA

Yes

2

BIPOLAR

1 mA

Tape And Reel

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

50 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

LM2903DMR2G

Onsemi

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

15 mV

500 nA

Yes

2

BIPOLAR

2.5 mA

Tape And Reel

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

36 V

0.026 in (0.65 mm)

105 °C (221 °F)

250 nA

1.5 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LM393DGKR

Texas Instruments

Comparator

Commercial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

9 mV

-400 nA

Yes

2

BIPOLAR

1 mA

Tape And Reel

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

36 V

0.026 in (0.65 mm)

70 °C (158 °F)

50 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

TLV3202AIDGKR

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

6 mV

5 nA

Yes

2

100 μA

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

50 pA

47 ns

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LM393DMR2G

Onsemi

Comparator

Commercial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

9 mV

400 nA

Yes

2

BIPOLAR

2.5 mA

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

36 V

0.026 in (0.65 mm)

70 °C (158 °F)

250 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

TLV1702AIDGKR

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

5.5 mV

20 uA

Yes

2

BIPOLAR

150 μA

Tape And Reel

2.2/36 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

40 V

0.026 in (0.65 mm)

125 °C (257 °F)

15 nA

560 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

LM339QT

STMicroelectronics

Comparator

Commercial

No Lead

16

HVQCCN

Square

9 mV

400 nA

Yes

4

BIPOLAR

2.5 mA

Tape And Reel

5 V

5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.12SQ,20

Comparators

32 V

0.02 in (0.5 mm)

70 °C (158 °F)

250 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Quad

S-XQCC-N16

1

0.039 in (1 mm)

0.118 in (3 mm)

No

0.118 in (3 mm)

TLV3202AIDGK

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

6 mV

5 nA

Yes

2

100 μA

Tube

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

50 pA

47 ns

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

LM2903M8-13

Diodes Incorporated

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

4 mV

500 nA

Yes

2

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

1.3 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

0.043 in (1.1 mm)

0.118 in (3 mm)

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LM393ADGKR

Texas Instruments

Comparator

Commercial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

4 mV

-400 nA

Yes

2

BIPOLAR

1 mA

Tape And Reel

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

36 V

0.026 in (0.65 mm)

70 °C (158 °F)

50 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

TLV1702AQDGKRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

5.5 mV

20 nA

Yes

2

BIPOLAR

AEC-Q100

150 μA

Small Outline, Thin Profile, Shrink Pitch

Comparators

40 V

0.026 in (0.65 mm)

125 °C (257 °F)

15 nA

560 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G8

2

0.043 in (1.1 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LM293ADGKR

Texas Instruments

Comparator

Other

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

4 mV

-400 nA

Yes

2

BIPOLAR

1 mA

Tape And Reel

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

36 V

0.026 in (0.65 mm)

85 °C (185 °F)

50 nA

1.3 µs

Open-Collector

-25 °C (-13 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

LM2903DGKRG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

15 mV

-500 nA

Yes

2

BIPOLAR

1 mA

Tape And Reel

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

50 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

TLV1702AIDGK

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

5.5 mV

20 uA

Yes

2

BIPOLAR

150 μA

Tube

2.2/36 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

40 V

0.026 in (0.65 mm)

125 °C (257 °F)

15 nA

560 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

TLV7012DGKR

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

8 mV

2 pA

Yes

2

18 μA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

2 pA

5 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold Silver

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LM293DGKR

Texas Instruments

Comparator

Other

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

9 mV

-400 nA

Yes

2

BIPOLAR

1 mA

Tape And Reel

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

36 V

0.026 in (0.65 mm)

85 °C (185 °F)

50 nA

1.3 µs

Open-Collector

-25 °C (-13 °F)

Nickel/Palladium/Gold

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

MCP6567-E/MS

Microchip Technology

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

10 mV

5 nA

Yes

2

CMOS

130 μA

Tube

1.8 V

2/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

6.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 nA

56 ns

Open-Drain

-40 °C (-40 °F)

Matte Tin - annealed

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

40

260 °C (500 °F)

0.118 in (3 mm)

LMV393IDGKR

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

9 mV

400 nA

Yes

2

BIPOLAR

300 μA

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

600 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

LM293DMR2G

Onsemi

Comparator

Other

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

9 mV

400 nA

Yes

2

BIPOLAR

2.5 mA

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

36 V

0.026 in (0.65 mm)

85 °C (185 °F)

250 nA

1.3 µs

Open-Collector

-25 °C (-13 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LM393DGKRG4

Texas Instruments

Comparator

Commercial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

9 mV

-400 nA

Yes

2

BIPOLAR

1 mA

Tape And Reel

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

36 V

0.026 in (0.65 mm)

70 °C (158 °F)

50 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

MCP6562-E/MS

Microchip Technology

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

10 mV

5 nA

Yes

2

CMOS

260 μA

Tube

1.8 V

2/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

6.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

56 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin - annealed

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

40

260 °C (500 °F)

0.118 in (3 mm)

MCP6542T-I/MS

Microchip Technology

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

7 mV

100 pA

Yes

2

CMOS

2 μA

Tape And Reel

5 V

1.6/5.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

7 V

0.026 in (0.65 mm)

85 °C (185 °F)

4 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

TLV3202AQDGKRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

6 mV

5 nA

Yes

2

AEC-Q100

100 μA

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

50 pA

47 ns

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G8

2

0.043 in (1.1 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LM2901Q4T

STMicroelectronics

Comparator

Automotive

No Lead

16

HVQCCN

Square

Plastic/Epoxy

15 mV

400 nA

Yes

4

BIPOLAR

2.5 mA

Tape And Reel

5 V

5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.12SQ,20

Comparators

36 V

0.02 in (0.5 mm)

125 °C (257 °F)

250 nA

Open-Collector

-40 °C (-40 °F)

Matte Tin

Quad

S-PQCC-N16

1

0.039 in (1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LM393ADGKRG4

Texas Instruments

Comparator

Commercial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

4 mV

-400 nA

Yes

2

BIPOLAR

1 mA

Tape And Reel

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

36 V

0.026 in (0.65 mm)

70 °C (158 °F)

50 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

TLV3402IDGKR

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

2

1.28 μA

0 V

Tape And Reel

5 V

±1.35/±8/2.7/16 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

17 V

0.026 in (0.65 mm)

125 °C (257 °F)

100 pA

175 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

LMV393DMR2G

Onsemi

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

9 mV

Yes

2

CMOS

140 μA

2.7 V

2.7/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

5.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

200 ns

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LT6703IDC-3#TRMPBF

Analog Devices

Comparator

Industrial

No Lead

3

HVSON

Square

Plastic/Epoxy

10 nA

Yes

1

Tape And Reel

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

18.5 V

0.02 in (0.5 mm)

85 °C (185 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-N3

1

0.031 in (0.8 mm)

0.079 in (2 mm)

No

e3

30 s

260 °C (500 °F)

0.079 in (2 mm)

MCP6562T-E/MS

Microchip Technology

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

10 mV

5 nA

Yes

2

CMOS

260 μA

Tape And Reel

1.8 V

2/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

6.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

56 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin - annealed

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

40

260 °C (500 °F)

0.118 in (3 mm)

LMV762MMX/NOPB

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1 mV

50 pA

Yes

2

AEC-Q100

1.4 mA

Tape And Reel

2.7 V

2.7/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 pA

120 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

TLV7042DGKR

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

8 mV

2 pA

Yes

2

1.5 μA

1.8 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

2 pA

3 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

TLV3402IDGKRG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

2

1.9 μA

0 V

5 V

±1.35/±8/2.7/16 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

17 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 pA

175 µs

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LMV762MMX

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1 mV

50 pA

Yes

2

AEC-Q100

1.4 mA

Tape And Reel

5 V

2.7/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 pA

225 ns

Push-Pull

-40 °C (-40 °F)

Tin/Lead

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

260 °C (500 °F)

0.118 in (3 mm)

LM293DGKRG4

Texas Instruments

Comparator

Other

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

9 mV

-400 nA

Yes

2

BIPOLAR

1 mA

Tape And Reel

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

36 V

0.026 in (0.65 mm)

85 °C (185 °F)

50 nA

1.3 µs

Open-Collector

-25 °C (-13 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

LMV393MMX/NOPB

Texas Instruments

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

7 mV

250 nA

Yes

2

BICMOS

100 μA

0 V

Tape And Reel

2.7 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

5.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

250 nA

450 ns

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

LM293ADGKRG4

Texas Instruments

Comparator

Other

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

4 mV

-400 nA

Yes

2

BIPOLAR

1 mA

Tape And Reel

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

36 V

0.026 in (0.65 mm)

85 °C (185 °F)

50 nA

1.3 µs

Open-Collector

-25 °C (-13 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

INA300AIDGSR

Texas Instruments

Comparator

Automotive

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

500 uV

10 uA

Yes

1

100 dB

135 μA

Tape And Reel

3.3 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

10 nA

36 V

100 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

NCV2903DMR2G

Onsemi

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

15 mV

500 nA

Yes

2

BIPOLAR

AEC-Q100

2.5 mA

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

1.5 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LM2903BIDGKR

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

2.5 mV

25 nA

Yes

2

BIPOLAR

800 μA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

38 V

0.026 in (0.65 mm)

125 °C (257 °F)

25 nA

1 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

INA301A3QDGKTQ1

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

35 uV

Yes

1

100 dB

AEC-Q100

700 μA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

4 V/us

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

36 V

750 ns

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold Silver

Dual

S-PDSO-G8

2

0.043 in (1.1 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LT1711IMS8#PBF

Analog Devices

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-6.3 V

6 mV

10 uA

Yes

1

-5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

6.3 V

0.026 in (0.65 mm)

85 °C (185 °F)

5.5 ns

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LM393QT

STMicroelectronics

Comparator

Commercial

No Lead

8

HVSON

Square

Plastic/Epoxy

9 mV

400 nA

Yes

2

BIPOLAR

2.5 mA

Tape And Reel

5 V

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC8,.08,20

Comparators

36 V

0.02 in (0.5 mm)

70 °C (158 °F)

250 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Matte Tin - annealed

Dual

S-PDSO-N8

1

0.024 in (0.6 mm)

0.079 in (2 mm)

No

e3

30 s

260 °C (500 °F)

0.079 in (2 mm)

LM293QT

STMicroelectronics

Comparator

Industrial

No Lead

8

HVSON

Square

Plastic/Epoxy

9 mV

400 nA

Yes

2

BIPOLAR

2.5 mA

Tape And Reel

5 V

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC8,.08,20

Comparators

36 V

0.02 in (0.5 mm)

105 °C (221 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-N8

1

0.024 in (0.6 mm)

0.079 in (2 mm)

No

e3

30 s

260 °C (500 °F)

0.079 in (2 mm)

LTC6752IUD-3#PBF

Analog Devices

Comparator

Industrial

No Lead

12

HVQCCN

Square

Plastic/Epoxy

8.5 mV

2.1 uA

Yes

1

CMOS

2.5 mA

2.5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC12,.12SQ,20

Comparators

5.5 V

0.02 in (0.5 mm)

85 °C (185 °F)

1.25 uA

2.9 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-PQCC-N12

0.031 in (0.8 mm)

0.118 in (3 mm)

e3

0.118 in (3 mm)

LM2903QDGKRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

7 mV

-500 nA

Yes

2

BIPOLAR

AEC-Q100

1 mA

0 V

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

50 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold Silver

Dual

S-PDSO-G8

2

0.043 in (1.1 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LMV762MM/NOPB

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1 mV

50 pA

Yes

2

AEC-Q100

1.4 mA

Tape And Reel

2.7 V

2.7/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 pA

120 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LTC6752HMS8-2#PBF

Analog Devices

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

8.5 mV

2.1 uA

Yes

1

CMOS

2.5 mA

2.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

1.25 uA

2.9 ns

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

0.043 in (1.1 mm)

0.118 in (3 mm)

e3

0.118 in (3 mm)

MCP6542-E/MS

Microchip Technology

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

7 mV

5 nA

Yes

2

CMOS

1 μA

Tube

5 V

1.6/5.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

4 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.