Part | RoHS | Manufacturer | Amplifier Type | Temperature Grade | Terminal Form | No. of Terminals | Package Code | Package Shape | Total Dose (V) | Package Body Material | Nominal Unity Gain Bandwidth | Maximum Negative Supply Voltage Limit | Maximum Input Offset Voltage | Maximum Average Bias Current (IIB) | Surface Mount | No. of Functions | Minimum Common Mode Reject Ratio | Technology | Screening Level | Nominal Common Mode Reject Ratio | Maximum Supply Current | Nominal Negative Supply Voltage (Vsup) | Minimum Isolation Voltage | Packing Method | Nominal Supply Voltage / Vsup (V) | Power Supplies (V) | Package Style (Meter) | Package Equivalence Code | Sub-Category | Nominal Slow Rate | Maximum Supply Voltage Limit | Terminal Pitch | Maximum Operating Temperature | Maximum Bias Current (IIB) @25C | Maximum Common Mode Voltage | Nominal Response Time | Output Type | Minimum Operating Temperature | Terminal Finish | Terminal Position | JESD-30 Code | Moisture Sensitivity Level (MSL) | Maximum Seated Height | Width | Qualification | Nominal Bandwidth (3dB) | JESD-609 Code | Maximum Time At Peak Reflow Temperature (s) | Peak Reflow Temperature (C) | Length |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Analog Devices |
Comparator |
Industrial |
Gull Wing |
8 |
TSSOP |
Square |
Plastic/Epoxy |
3 mV |
-400 nA |
Yes |
1 |
CMOS |
500 μA |
5.25 V |
3/5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP8,.19 |
Comparators |
6 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
400 nA |
28 ns |
-40 °C (-40 °F) |
Matte Tin - annealed |
Dual |
S-PDSO-G8 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
e3 |
30 s |
260 °C (500 °F) |
0.118 in (3 mm) |
||||||||||||||
|
Microchip Technology |
Comparator |
Industrial |
Gull Wing |
8 |
TSSOP |
Square |
Plastic/Epoxy |
7 mV |
100 pA |
Yes |
2 |
CMOS |
TS 16949 |
2 μA |
Tape And Reel |
5 V |
1.6/5.5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP8,.19 |
Comparators |
7 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
3 µs |
Open-Drain |
-40 °C (-40 °F) |
Matte Tin |
Dual |
S-PDSO-G8 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
e3 |
260 °C (500 °F) |
0.118 in (3 mm) |
|||||||||||||
|
Microchip Technology |
Comparator |
Automotive |
Gull Wing |
8 |
TSSOP |
Square |
Plastic/Epoxy |
10 mV |
5 nA |
Yes |
2 |
CMOS |
130 μA |
Tape And Reel |
1.8 V |
2/5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP8,.19 |
Comparators |
6.5 V |
0.026 in (0.65 mm) |
125 °C (257 °F) |
5 nA |
56 ns |
Open-Drain |
-40 °C (-40 °F) |
Matte Tin - annealed |
Dual |
S-PDSO-G8 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
e3 |
40 |
260 °C (500 °F) |
0.118 in (3 mm) |
||||||||||||
|
Analog Devices |
Comparator |
Industrial |
Gull Wing |
8 |
TSSOP |
Square |
Plastic/Epoxy |
10 mV |
10 uA |
Yes |
1 |
ECL |
42 mA |
3.3 V |
3.3 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP8,.19 |
Comparators |
6 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
5 uA |
Open-Emitter |
-40 °C (-40 °F) |
Matte Tin |
Dual |
S-PDSO-G8 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
e3 |
30 s |
260 °C (500 °F) |
0.118 in (3 mm) |
||||||||||||||
|
Analog Devices |
Comparator |
Automotive |
Gull Wing |
8 |
TSSOP |
Square |
Plastic/Epoxy |
5 mV |
5 uA |
Yes |
1 |
BIPOLAR |
Tape And Reel, 7 Inch |
3/5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP8,.19 |
Comparators |
6 V |
0.026 in (0.65 mm) |
125 °C (257 °F) |
5 uA |
5 ns |
Push-Pull |
-40 °C (-40 °F) |
Matte Tin |
Dual |
S-PDSO-G8 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
e3 |
40 |
260 °C (500 °F) |
0.118 in (3 mm) |
||||||||||||||
|
STMicroelectronics |
Comparator |
Industrial |
No Lead |
16 |
HVQCCN |
Square |
9 mV |
400 nA |
Yes |
4 |
BIPOLAR |
2.5 mA |
Tape And Reel |
5 V |
5 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC16,.12SQ,20 |
Comparators |
32 V |
0.02 in (0.5 mm) |
105 °C (221 °F) |
250 nA |
1.3 µs |
Open-Collector |
-40 °C (-40 °F) |
Matte Tin |
Quad |
S-XQCC-N16 |
1 |
0.039 in (1 mm) |
0.118 in (3 mm) |
No |
e3 |
260 °C (500 °F) |
0.118 in (3 mm) |
||||||||||||||
|
Texas Instruments |
Comparator |
Automotive |
No Lead |
24 |
HVQCCN |
Square |
6 mV |
15 nA |
Yes |
6 |
60 μA |
Tape And Reel |
3.3 V |
3.3 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC24,.16SQ,20 |
Comparators |
6 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
5 nA |
5.6 µs |
Open-Drain |
-40 °C (-40 °F) |
Matte Tin |
Quad |
S-XQCC-N24 |
1 |
0.031 in (0.8 mm) |
0.157 in (4 mm) |
No |
e3 |
30 s |
260 °C (500 °F) |
0.157 in (4 mm) |
||||||||||||||
|
Analog Devices |
Comparator |
Industrial |
No Lead |
3 |
HVSON |
Square |
Plastic/Epoxy |
10 nA |
Yes |
1 |
5 V |
Small Outline, Heat Sink/Slug, Very Thin Profile |
Comparators |
18.5 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
29 µs |
Open-Collector |
-40 °C (-40 °F) |
Matte Tin - annealed |
Dual |
S-PDSO-N3 |
1 |
0.031 in (0.8 mm) |
0.079 in (2 mm) |
No |
e3 |
30 s |
260 °C (500 °F) |
0.079 in (2 mm) |
|||||||||||||||||||
|
Texas Instruments |
Comparator |
Automotive |
No Lead |
6 |
VSON |
Square |
Plastic/Epoxy |
22 mV |
20 nA |
Yes |
1 |
150 nA |
Tape And Reel |
0.9/6.5 V |
Small Outline, Very Think Profile |
SOLCC6,.04,14 |
Comparators |
7 V |
0.014 in (0.35 mm) |
125 °C (257 °F) |
100 pA |
40 µs |
Push-Pull |
-40 °C (-40 °F) |
Nickel/Palladium/Gold |
Dual |
S-PDSO-N6 |
1 |
0.016 in (0.4 mm) |
0.039 in (1 mm) |
No |
e4 |
260 °C (500 °F) |
0.039 in (1 mm) |
|||||||||||||||
Texas Instruments |
Comparator |
Military |
No Lead |
20 |
QCCN |
Square |
Ceramic, Metal-Sealed Cofired |
10 mV |
30 nA |
Yes |
4 |
CMOS |
MIL-STD-883 |
80 μA |
Tube |
5 V |
4/10 V |
Chip Carrier |
LCC20,.35SQ |
Comparators |
18 V |
0.05 in (1.27 mm) |
125 °C (257 °F) |
30 pA |
2.5 µs |
Open-Collector, Open-Drain |
-55 °C (-67 °F) |
Tin Lead |
Quad |
S-CQCC-N20 |
0.08 in (2.03 mm) |
0.35 in (8.89 mm) |
Yes |
e0 |
0.35 in (8.89 mm) |
|||||||||||||||
|
Analog Devices |
Comparator |
Automotive |
Gull Wing |
8 |
TSSOP |
Square |
Plastic/Epoxy |
5 mV |
5 uA |
Yes |
1 |
BIPOLAR |
Tape And Reel |
3/5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP8,.19 |
Comparators |
6 V |
0.026 in (0.65 mm) |
125 °C (257 °F) |
5 uA |
5 ns |
Push-Pull |
-40 °C (-40 °F) |
Matte Tin |
Dual |
S-PDSO-G8 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
e3 |
30 s |
260 °C (500 °F) |
0.118 in (3 mm) |
||||||||||||||
|
Analog Devices |
Comparator |
Industrial |
No Lead |
16 |
HQCCN |
Square |
Yes |
1 |
-3 V |
3.3 V |
Chip Carrier, Heat Sink/Slug |
Comparators |
4 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
Push-Pull |
-40 °C (-40 °F) |
Gold Over Nickel |
Quad |
S-XQCC-N16 |
0.052 in (1.31 mm) |
0.118 in (3 mm) |
No |
e4 |
0.118 in (3 mm) |
||||||||||||||||||||||||
|
Analog Devices |
Comparator |
Industrial |
No Lead |
3 |
HVSON |
Square |
Plastic/Epoxy |
10 nA |
Yes |
1 |
5 V |
Small Outline, Heat Sink/Slug, Very Thin Profile |
Comparators |
18.5 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
29 µs |
Open-Collector |
-40 °C (-40 °F) |
Matte Tin - annealed |
Dual |
S-PDSO-N3 |
1 |
0.031 in (0.8 mm) |
0.079 in (2 mm) |
No |
e3 |
30 s |
260 °C (500 °F) |
0.079 in (2 mm) |
|||||||||||||||||||
|
Analog Devices |
Comparator |
Automotive |
No Lead |
8 |
HVSON |
Square |
Plastic/Epoxy |
10 uA |
Yes |
1 |
AEC-Q100 |
3.3 V |
Small Outline, Heat Sink/Slug, Very Thin Profile |
Comparators |
3.6 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
0.27 ns |
-40 °C (-40 °F) |
Matte Tin - annealed |
Dual |
S-PDSO-N8 |
1 |
0.031 in (0.8 mm) |
0.079 in (2 mm) |
e3 |
30 s |
260 °C (500 °F) |
0.079 in (2 mm) |
||||||||||||||||||||
Texas Instruments |
Comparator |
Automotive |
Ball |
4 |
VFBGA |
Square |
Plastic/Epoxy |
5 nA |
Yes |
1 |
1.8 V |
Grid Array, Very Thin Profile, Fine Pitch |
Comparators |
6 V |
0.014 in (0.35 mm) |
125 °C (257 °F) |
450 ns |
Open-Drain |
-40 °C (-40 °F) |
Bottom |
S-PBGA-B4 |
0.016 in (0.4 mm) |
0.028 in (0.7 mm) |
0.028 in (0.7 mm) |
||||||||||||||||||||||||||
|
Texas Instruments |
Comparator |
Gull Wing |
8 |
TSSOP |
Square |
Plastic/Epoxy |
2.5 mV |
50 nA |
Yes |
2 |
AEC-Q100 |
800 μA |
Tape And Reel |
5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP8,.19 |
36 V |
0.026 in (0.65 mm) |
125 °C (257 °F) |
25 nA |
1 µs |
Open-Collector |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Dual |
S-PDSO-G8 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
e4 |
260 °C (500 °F) |
0.118 in (3 mm) |
|||||||||||||||||
Texas Instruments |
Comparator |
Industrial |
Gull Wing |
8 |
TSSOP |
Square |
Plastic/Epoxy |
0 V |
8 mV |
Yes |
2 |
CMOS |
25 μA |
0 V |
5 V |
2.7/15 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP8,.19 |
Comparators |
16 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
4 µs |
Open-Drain |
-40 °C (-40 °F) |
Tin Lead |
Dual |
S-PDSO-G8 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
e0 |
260 °C (500 °F) |
0.118 in (3 mm) |
|||||||||||||||
Analog Devices |
Comparator |
Industrial |
Gull Wing |
8 |
TSSOP |
Square |
Plastic/Epoxy |
-6.3 V |
6 mV |
10 uA |
Yes |
1 |
-5 V |
Tape And Reel |
5 V |
Small Outline, Thin Profile, Shrink Pitch |
Comparators |
6.3 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
5.5 ns |
-40 °C (-40 °F) |
Tin/Lead |
Dual |
S-PDSO-G8 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
e0 |
0.118 in (3 mm) |
|||||||||||||||||||
|
Maxim Integrated |
Comparator |
Industrial |
Gull Wing |
10 |
TSSOP |
Square |
Plastic/Epoxy |
9 mV |
25 nA |
Yes |
2 |
BIPOLAR |
130 μA |
5 V |
3/5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP10,.19,20 |
Comparators |
6 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
25 nA |
400 ns |
Push-Pull |
-40 °C (-40 °F) |
Matte Tin |
Dual |
S-PDSO-G10 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
e3 |
30 s |
260 °C (500 °F) |
0.118 in (3 mm) |
|||||||||||||
Maxim Integrated |
Comparator |
Industrial |
Gull Wing |
10 |
TSSOP |
Square |
Plastic/Epoxy |
9 mV |
25 nA |
Yes |
2 |
BIPOLAR |
130 μA |
5 V |
3/5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP10,.19,20 |
Comparators |
6 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
25 nA |
450 ns |
Push-Pull |
-40 °C (-40 °F) |
Tin Lead |
Dual |
S-PDSO-G10 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
e0 |
0.118 in (3 mm) |
||||||||||||||||
Maxim Integrated |
Comparator |
Commercial |
Gull Wing |
100 |
HTFQFP |
Square |
Plastic/Epoxy |
-7 V |
100 mV |
25 uA |
Yes |
4 |
BIPOLAR |
-5.25 V |
9.75 V |
Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch |
Comparators |
11.5 V |
0.02 in (0.5 mm) |
70 °C (158 °F) |
2.2 ns |
Open-Collector |
0 °C (32 °F) |
Tin Lead |
Quad |
S-PQFP-G100 |
3 |
0.047 in (1.2 mm) |
0.551 in (14 mm) |
No |
e0 |
0.551 in (14 mm) |
||||||||||||||||||
|
Analog Devices |
Comparator |
Commercial |
Gull Wing |
100 |
HTFQFP |
Square |
Plastic/Epoxy |
-7 V |
100 mV |
25 uA |
Yes |
4 |
BIPOLAR |
-5.25 V |
9.75 V |
Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch |
Comparators |
11.5 V |
0.02 in (0.5 mm) |
70 °C (158 °F) |
2.2 ns |
Open-Collector |
0 °C (32 °F) |
Matte Tin - annealed |
Quad |
S-PQFP-G100 |
3 |
0.047 in (1.2 mm) |
0.551 in (14 mm) |
No |
e3 |
30 s |
260 °C (500 °F) |
0.551 in (14 mm) |
|||||||||||||||
|
Microchip Technology |
Comparator |
Industrial |
Gull Wing |
8 |
TSSOP |
Square |
Plastic/Epoxy |
7 mV |
100 pA |
Yes |
2 |
CMOS |
TS 16949 |
2 μA |
Tube |
5 V |
1.6/5.5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP8,.19 |
Comparators |
7 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
3 µs |
Open-Drain |
-40 °C (-40 °F) |
Matte Tin |
Dual |
S-PDSO-G8 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
e3 |
40 |
260 °C (500 °F) |
0.118 in (3 mm) |
||||||||||||
|
Texas Instruments |
Comparator |
Military |
No Lead |
20 |
QCCN |
Square |
Ceramic, Metal-Sealed Cofired |
-18 V |
4 mV |
500 nA |
Yes |
2 |
BIPOLAR |
MIL-STD-883 |
11 mA |
-15 V |
Tube |
15 V |
±15 V |
Chip Carrier |
LCC20,.35SQ |
Comparators |
18 V |
0.05 in (1.27 mm) |
125 °C (257 °F) |
500 nA |
80 ns |
Open-Collector |
-55 °C (-67 °F) |
Quad |
S-CQCC-N20 |
1 |
0.075 in (1.905 mm) |
0.35 in (8.89 mm) |
No |
0.35 in (8.89 mm) |
|||||||||||||
Analog Devices |
Comparator |
Industrial |
Gull Wing |
8 |
TSSOP |
Square |
Plastic/Epoxy |
-6.3 V |
6 mV |
10 uA |
Yes |
1 |
-5 V |
5 V |
Small Outline, Thin Profile, Shrink Pitch |
Comparators |
6.3 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
5.5 ns |
-40 °C (-40 °F) |
Tin/Lead |
Dual |
S-PDSO-G8 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
e0 |
20 s |
235 °C (455 °F) |
0.118 in (3 mm) |
||||||||||||||||||
Texas Instruments |
Comparator |
Gull Wing |
8 |
TSSOP |
Square |
Plastic/Epoxy |
2 mV |
Yes |
2 |
AEC-Q100 |
70 μA |
Tape And Reel, 13 Inch |
5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP8,.19 |
6 V |
0.026 in (0.65 mm) |
125 °C (257 °F) |
115 ns |
Push-Pull |
-40 °C (-40 °F) |
Dual |
S-PDSO-G8 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
0.118 in (3 mm) |
||||||||||||||||||||||||
|
Texas Instruments |
Comparator |
Gull Wing |
8 |
TSSOP |
Square |
Plastic/Epoxy |
2 mV |
Yes |
2 |
70 μA |
Tape And Reel, 13 Inch |
5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP8,.19 |
Comparators |
6 V |
0.026 in (0.65 mm) |
125 °C (257 °F) |
115 ns |
Push-Pull |
-40 °C (-40 °F) |
Matte Tin |
Dual |
S-PDSO-G8 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
e3 |
260 °C (500 °F) |
0.118 in (3 mm) |
|||||||||||||||||||
|
Texas Instruments |
Comparator |
No Lead |
8 |
HVSON |
Square |
Plastic/Epoxy |
2 mV |
Yes |
2 |
70 μA |
Tape And Reel, 7 Inch |
5 V |
Small Outline, Heat Sink/Slug, Very Thin Profile |
SOLCC8,.08,20 |
6 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
115 ns |
Push-Pull |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Dual |
S-PDSO-N8 |
1 |
0.031 in (0.8 mm) |
0.079 in (2 mm) |
e4 |
260 °C (500 °F) |
0.079 in (2 mm) |
||||||||||||||||||||
|
Texas Instruments |
Comparator |
Gull Wing |
8 |
TSSOP |
Square |
Plastic/Epoxy |
2 mV |
Yes |
2 |
AEC-Q100 |
70 μA |
Tape And Reel, 13 Inch |
5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP8,.19 |
6 V |
0.026 in (0.65 mm) |
125 °C (257 °F) |
115 ns |
Push-Pull |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Dual |
S-PDSO-G8 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
e4 |
260 °C (500 °F) |
0.118 in (3 mm) |
|||||||||||||||||||
|
Analog Devices |
Comparator |
Automotive |
No Lead |
12 |
HVQCCN |
Square |
5 mV |
5 uA |
Yes |
1 |
3 mA |
Tape And Reel |
2.5 V |
3/5 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC12,.12SQ,20 |
Comparators |
6 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
5 uA |
3 ns |
-40 °C (-40 °F) |
Matte Tin |
Quad |
S-XQCC-N12 |
3 |
0.039 in (1 mm) |
0.118 in (3 mm) |
No |
e3 |
260 °C (500 °F) |
0.118 in (3 mm) |
||||||||||||||||
|
Analog Devices |
Comparator |
Industrial |
No Lead |
16 |
HQCCN |
Square |
Ceramic, Metal-Sealed Cofired |
Yes |
1 |
-3 V |
3.3 V |
Chip Carrier, Heat Sink/Slug |
Comparators |
4 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
Push-Pull |
-40 °C (-40 °F) |
Gold Over Nickel |
Quad |
S-CQCC-N16 |
0.057 in (1.45 mm) |
0.118 in (3 mm) |
No |
e4 |
0.118 in (3 mm) |
|||||||||||||||||||||||
|
Analog Devices |
Comparator |
Industrial |
No Lead |
16 |
HVQCCN |
Square |
5 mV |
Yes |
1 |
BIPOLAR |
52 mA |
3.3 V |
3.3/5 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC16,.12SQ,20 |
Comparators |
6 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
50 uA |
0.165 ns |
-40 °C (-40 °F) |
Matte Tin |
Quad |
S-XQCC-N16 |
3 |
0.039 in (1 mm) |
0.118 in (3 mm) |
No |
e3 |
260 °C (500 °F) |
0.118 in (3 mm) |
|||||||||||||||||
|
Texas Instruments |
Comparator |
Gull Wing |
8 |
TSSOP |
Square |
Plastic/Epoxy |
2.5 mV |
50 nA |
Yes |
2 |
AEC-Q100 |
800 μA |
Tape And Reel |
5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP8,.19 |
36 V |
0.026 in (0.65 mm) |
125 °C (257 °F) |
25 nA |
1 µs |
Open-Collector |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Dual |
S-PDSO-G8 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
e4 |
260 °C (500 °F) |
0.118 in (3 mm) |
|||||||||||||||||
Texas Instruments |
Comparator |
Automotive |
Gull Wing |
8 |
TSSOP |
Square |
Plastic/Epoxy |
1 mV |
50 pA |
Yes |
2 |
1.4 mA |
5 V |
2.7/5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP8,.19 |
Comparators |
5.5 V |
0.026 in (0.65 mm) |
125 °C (257 °F) |
50 pA |
225 ns |
Push-Pull |
-40 °C (-40 °F) |
Tin Lead |
Dual |
S-PDSO-G8 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
e0 |
260 °C (500 °F) |
0.118 in (3 mm) |
||||||||||||||||
|
Analog Devices |
Comparator |
Industrial |
Gull Wing |
8 |
TSSOP |
Square |
Plastic/Epoxy |
-0.3 V |
10 mV |
Yes |
1 |
CMOS |
0 V |
Tape And Reel |
3 V |
Small Outline, Thin Profile, Shrink Pitch |
Comparators |
12 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
14 µs |
-40 °C (-40 °F) |
Matte Tin |
Dual |
S-PDSO-G8 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
e3 |
30 s |
260 °C (500 °F) |
0.118 in (3 mm) |
||||||||||||||||
Maxim Integrated |
Comparator |
Industrial |
Gull Wing |
10 |
TSSOP |
Square |
Plastic/Epoxy |
7 mV |
10 nA |
Yes |
2 |
BIPOLAR |
85 μA |
5 V |
3/5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP10,.19,20 |
Comparators |
6 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
10 nA |
450 ns |
Push-Pull |
-40 °C (-40 °F) |
Tin Lead |
Dual |
S-PDSO-G10 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
e0 |
0.118 in (3 mm) |
||||||||||||||||
|
Analog Devices |
Comparator |
Industrial |
Gull Wing |
10 |
TSSOP |
Square |
Plastic/Epoxy |
7 mV |
10 nA |
Yes |
2 |
BIPOLAR |
85 μA |
5 V |
3/5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP10,.19,20 |
Comparators |
6 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
10 nA |
400 ns |
Push-Pull |
-40 °C (-40 °F) |
Matte Tin - annealed |
Dual |
S-PDSO-G10 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
e3 |
30 s |
260 °C (500 °F) |
0.118 in (3 mm) |
|||||||||||||
|
STMicroelectronics |
Comparator |
Automotive |
No Lead |
8 |
HVSON |
Square |
Plastic/Epoxy |
6 mV |
100 nA |
Yes |
2 |
Tape And Reel |
1.8 V |
Small Outline, Heat Sink/Slug, Very Thin Profile |
Comparators |
5.5 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
420 ns |
Open-Drain |
-40 °C (-40 °F) |
Dual |
S-PDSO-N8 |
0.024 in (0.6 mm) |
0.079 in (2 mm) |
0.079 in (2 mm) |
|||||||||||||||||||||||
|
Analog Devices |
Comparator |
Industrial |
No Lead |
32 |
HVQCCN |
Square |
-6 V |
900 nA |
Yes |
1 |
-5 V |
5 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
Comparators |
6 V |
0.02 in (0.5 mm) |
105 °C (221 °F) |
6 ns |
-40 °C (-40 °F) |
Matte Tin |
Quad |
S-XQCC-N32 |
3 |
0.039 in (1 mm) |
0.197 in (5 mm) |
No |
e3 |
260 °C (500 °F) |
0.197 in (5 mm) |
||||||||||||||||||||
|
Analog Devices |
Comparator |
Industrial |
No Lead |
16 |
HVQCCN |
Square |
-6 V |
10 mV |
10 uA |
Yes |
2 |
BIPOLAR |
-5.2 V |
Tape And Reel |
5 V |
5,-5.2 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC16,.12SQ,20 |
Comparators |
6 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
10 uA |
.83 ns |
Open-Emitter |
-40 °C (-40 °F) |
Matte Tin |
Quad |
S-XQCC-N16 |
3 |
0.035 in (0.9 mm) |
0.118 in (3 mm) |
No |
e3 |
260 °C (500 °F) |
0.118 in (3 mm) |
|||||||||||||
|
Analog Devices |
Comparator |
Industrial |
No Lead |
16 |
HVQCCN |
Square |
Plastic/Epoxy |
Yes |
1 |
-3 V |
3.3 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
Comparators |
4 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
0.1 ns |
-40 °C (-40 °F) |
Matte Tin - annealed |
Quad |
S-PQCC-N16 |
1 |
0.039 in (1 mm) |
0.118 in (3 mm) |
No |
e3 |
0.118 in (3 mm) |
||||||||||||||||||||||
|
Analog Devices |
Comparator |
Industrial |
No Lead |
16 |
QCCN |
Square |
Plastic/Epoxy |
Yes |
Tape And Reel |
-3,3.3 V |
Chip Carrier |
LCC16,.12SQ,20 |
Comparators |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Quad |
S-PQCC-N16 |
No |
||||||||||||||||||||||||||||||
|
Texas Instruments |
Comparator |
Industrial |
Ball |
8 |
VFBGA |
Square |
Plastic/Epoxy |
0 V |
4 mV |
100 nA |
Yes |
1 |
BICMOS |
28 μA |
0 V |
Tape And Reel |
1.8 V |
1.8/5 V |
Grid Array, Very Thin Profile, Fine Pitch |
BGA8,3X3,20 |
Comparators |
5.5 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
100 nA |
1.8 µs |
Push-Pull |
-40 °C (-40 °F) |
Tin/Silver/Copper |
Bottom |
S-PBGA-B8 |
1 |
0.024 in (0.6 mm) |
0.06 in (1.514 mm) |
No |
e1 |
260 °C (500 °F) |
0.06 in (1.514 mm) |
|||||||||||
|
Analog Devices |
Comparator |
Commercial |
Gull Wing |
10 |
HTSSOP |
Square |
Plastic/Epoxy |
-7 V |
3.5 mV |
-6 uA |
Yes |
2 |
BIPOLAR |
-5 V |
Tape And Reel |
5 V |
Small Outline |
Comparators |
7 V |
0.02 in (0.5 mm) |
70 °C (158 °F) |
Push-Pull |
0 °C (32 °F) |
Matte Tin |
Dual |
S-PDSO-G10 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
e3 |
30 s |
260 °C (500 °F) |
0.118 in (3 mm) |
|||||||||||||||
|
Analog Devices |
Comparator |
Industrial |
No Lead |
12 |
HVQCCN |
Square |
Plastic/Epoxy |
8.5 mV |
2.1 uA |
Yes |
1 |
CMOS |
2.5 mA |
Tape And Reel |
2.5 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC12,.12SQ,20 |
Comparators |
5.5 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
1.25 uA |
2.9 ns |
-40 °C (-40 °F) |
Matte Tin |
Quad |
S-PQCC-N12 |
1 |
0.031 in (0.8 mm) |
0.118 in (3 mm) |
e3 |
260 °C (500 °F) |
0.118 in (3 mm) |
||||||||||||||||
Maxim Integrated |
Comparator |
Industrial |
Gull Wing |
10 |
TSSOP |
Square |
Plastic/Epoxy |
7 mV |
10 nA |
Yes |
2 |
5 V |
Small Outline, Thin Profile, Shrink Pitch |
Comparators |
6 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
450 ns |
Push-Pull |
-40 °C (-40 °F) |
Tin Lead |
Dual |
S-PDSO-G10 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
e0 |
245 °C (473 °F) |
0.118 in (3 mm) |
||||||||||||||||||||
|
Analog Devices |
Comparator |
Industrial |
Gull Wing |
10 |
TSSOP |
Square |
Plastic/Epoxy |
7 mV |
10 nA |
Yes |
2 |
BIPOLAR |
85 μA |
5 V |
3/5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP10,.19,20 |
Comparators |
6 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
10 nA |
400 ns |
Push-Pull |
-40 °C (-40 °F) |
Matte Tin - annealed |
Dual |
S-PDSO-G10 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
e3 |
30 s |
260 °C (500 °F) |
0.118 in (3 mm) |
|||||||||||||
|
Texas Instruments |
Comparator |
Automotive |
Gull Wing |
8 |
TSSOP |
Square |
Plastic/Epoxy |
0 V |
7 mV |
1.5 nA |
Yes |
2 |
CMOS |
1.6 μA |
0 V |
Tube |
5 V |
±1.35/±8/2.7/16 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP8,.19 |
Comparators |
17 V |
0.026 in (0.65 mm) |
125 °C (257 °F) |
100 pA |
240 µs |
Push-Pull |
-40 °C (-40 °F) |
Nickel/Palladium/Gold |
Dual |
S-PDSO-G8 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
e4 |
260 °C (500 °F) |
0.118 in (3 mm) |
Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.
A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.
Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.
It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.