Square Comparators 1,068

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Minimum Isolation Voltage Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Sub-Category Nominal Slow Rate Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Nominal Response Time Output Type Minimum Operating Temperature Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

LTC6752IMS8-2#PBF

Analog Devices

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

8.5 mV

2.1 uA

Yes

1

CMOS

2.5 mA

2.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

5.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

1.25 uA

2.9 ns

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LM2903BQDGKRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

2.5 mV

25 nA

Yes

2

BIPOLAR

AEC-Q100

800 μA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

25 nA

1 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LM2903ITLX/NOPB

Texas Instruments

Comparator

Industrial

Ball

8

FBGA

Square

Plastic/Epoxy

0 V

15 mV

500 nA

Yes

2

BIPOLAR

1 mA

0 V

Tape And Reel

5 V

5 V

Grid Array, Fine Pitch

BGA8,3X3,20

Comparators

36 V

0.02 in (0.5 mm)

85 °C (185 °F)

250 nA

1.5 µs

Open-Collector

-40 °C (-40 °F)

Tin/Silver/Copper

Bottom

S-PBGA-B8

1

0.027 in (0.675 mm)

0.06 in (1.514 mm)

No

e1

260 °C (500 °F)

0.06 in (1.514 mm)

LTC6752HUD-3#PBF

Analog Devices

Comparator

Automotive

No Lead

12

HVQCCN

Square

Plastic/Epoxy

8.5 mV

2.1 uA

Yes

1

CMOS

2.5 mA

2.5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC12,.12SQ,20

Comparators

5.5 V

0.02 in (0.5 mm)

125 °C (257 °F)

1.25 uA

2.9 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-PQCC-N12

0.031 in (0.8 mm)

0.118 in (3 mm)

e3

0.118 in (3 mm)

AD8611ARMZ-REEL

Analog Devices

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

7 mV

-4 uA

Yes

1

10 mA

0 V

Tape And Reel

3 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

7 V

0.026 in (0.65 mm)

85 °C (185 °F)

4.5 ns

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

LT1711CMS8#PBF

Analog Devices

Comparator

Commercial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-6.3 V

6 mV

10 uA

Yes

1

-5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

6.3 V

0.026 in (0.65 mm)

70 °C (158 °F)

5.5 ns

0 °C (32 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

INA301A1QDGKTQ1

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

125 uV

Yes

1

100 dB

AEC-Q100

700 μA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

4 V/us

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

36 V

750 ns

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold Silver

Dual

S-PDSO-G8

2

0.043 in (1.1 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LM393TLX/NOPB

Texas Instruments

Comparator

Commercial

Ball

8

FBGA

Square

Plastic/Epoxy

0 V

9 mV

400 nA

Yes

2

BIPOLAR

1 mA

0 V

Tape And Reel

5 V

5 V

Grid Array, Fine Pitch

BGA8,3X3,20

Comparators

36 V

0.02 in (0.5 mm)

70 °C (158 °F)

250 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Tin/Silver/Copper

Bottom

S-PBGA-B8

1

0.027 in (0.675 mm)

0.06 in (1.514 mm)

No

e1

260 °C (500 °F)

0.06 in (1.514 mm)

LM393BIDGKR

Texas Instruments

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

2.5 mV

25 nA

Yes

2

BIPOLAR

800 μA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

38 V

0.026 in (0.65 mm)

85 °C (185 °F)

25 nA

1 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LMC6772AIMMX/NOPB

Texas Instruments

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

8 mV

0.4 pA

Yes

2

CMOS

20 μA

0 V

Tape And Reel

5 V

2.7/15 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

16 V

0.026 in (0.65 mm)

85 °C (185 °F)

0.4 pA

4 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LM393ST

STMicroelectronics

Comparator

Commercial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

9 mV

400 nA

Yes

2

BIPOLAR

2.5 mA

0 V

Tape And Reel

5 V

±1/±18/2/36 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

36 V

0.026 in (0.65 mm)

70 °C (158 °F)

250 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LT6703HDC-3#TRMPBF

Analog Devices

Comparator

Automotive

No Lead

3

HVSON

Square

Plastic/Epoxy

10 nA

Yes

1

Tape And Reel

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

18.5 V

0.02 in (0.5 mm)

125 °C (257 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-N3

1

0.031 in (0.8 mm)

0.079 in (2 mm)

No

e3

30 s

260 °C (500 °F)

0.079 in (2 mm)

LT1715HMS#PBF

Analog Devices

Comparator

Automotive

Gull Wing

10

HTSSOP

Square

Plastic/Epoxy

-7 V

4 mV

-7 uA

Yes

2

BIPOLAR

-5 V

5 V

Small Outline

Comparators

7 V

0.02 in (0.5 mm)

125 °C (257 °F)

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LT6703IDC-2#TRMPBF

Analog Devices

Comparator

Industrial

No Lead

3

HVSON

Square

Plastic/Epoxy

10 nA

Yes

1

Tape And Reel

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

18.5 V

0.02 in (0.5 mm)

85 °C (185 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-N3

1

0.031 in (0.8 mm)

0.079 in (2 mm)

No

e3

30 s

260 °C (500 °F)

0.079 in (2 mm)

TSX3702IST

STMicroelectronics

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

6 mV

1.2 nA

Yes

2

CMOS

Tape And Reel

3 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

18 V

0.026 in (0.65 mm)

125 °C (257 °F)

2.4 µs

Push-Pull

-40 °C (-40 °F)

Dual

S-PDSO-G8

0.043 in (1.1 mm)

0.118 in (3 mm)

0.118 in (3 mm)

INA300AIDGST

Texas Instruments

Comparator

Automotive

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

500 uV

10 uA

Yes

1

100 dB

135 μA

Tape And Reel

3.3 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

10 nA

36 V

100 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LM2903BIDSGR

Texas Instruments

Comparator

Automotive

No Lead

8

HVSON

Square

Plastic/Epoxy

2.5 mV

25 nA

Yes

2

800 μA

Tape And Reel

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC8,.08,20

Comparators

38 V

0.02 in (0.5 mm)

125 °C (257 °F)

25 nA

1 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

S-PDSO-N8

1

0.031 in (0.8 mm)

0.079 in (2 mm)

e4

30 s

260 °C (500 °F)

0.079 in (2 mm)

LMV393MM/NOPB

Texas Instruments

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

7 mV

250 nA

Yes

2

BICMOS

100 μA

0 V

Tape And Reel

2.7 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

5.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

250 nA

450 ns

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

LTC1540CMS8#PBF

Analog Devices

Comparator

Commercial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

16 mV

Yes

1

0 V

3 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

12 V

0.026 in (0.65 mm)

70 °C (158 °F)

70 µs

0 °C (32 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

TLV6700DSER

Texas Instruments

Comparator

Automotive

No Lead

6

VSON

Square

Plastic/Epoxy

2 mV

15 nA

Yes

2

26 μA

5 V

Small Outline, Very Think Profile

Comparators

20 V

0.02 in (0.5 mm)

125 °C (257 °F)

15 nA

29 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

S-PDSO-N6

1

0.031 in (0.8 mm)

0.059 in (1.5 mm)

e4

30 s

260 °C (500 °F)

0.059 in (1.5 mm)

MCP6562T-E/MSVAO

Microchip Technology

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

10 mV

5 nA

Yes

2

CMOS

AEC-Q100

260 μA

Tape And Reel

1.8 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

6.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

56 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

0.043 in (1.1 mm)

0.118 in (3 mm)

e3

0.118 in (3 mm)

INA300AIDSQT

Texas Instruments

Comparator

Automotive

No Lead

10

HVSON

Square

Plastic/Epoxy

500 uV

10 uA

Yes

1

100 dB

135 μA

Tape And Reel

3.3 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

6 V

0.016 in (0.4 mm)

125 °C (257 °F)

10 nA

36 V

100 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

S-PDSO-N10

2

0.031 in (0.8 mm)

0.118 in (3 mm)

e4

260 °C (500 °F)

0.118 in (3 mm)

MAX9032AUA

Maxim Integrated

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

5 mV

80 nA

Yes

2

110 μA

0 V

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

80 nA

Push-Pull

-40 °C (-40 °F)

Tin Lead

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

0.118 in (3 mm)

MAX9032AUA+

Analog Devices

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

5 mV

80 nA

Yes

2

110 μA

0 V

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

80 nA

Push-Pull

-40 °C (-40 °F)

Matte Tin - annealed

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LMC6772AIMM/NOPB

Texas Instruments

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

8 mV

0.4 pA

Yes

2

CMOS

20 μA

0 V

Tape And Reel

5 V

2.7/15 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

16 V

0.026 in (0.65 mm)

85 °C (185 °F)

0.4 pA

4 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LT6703CDC-3#TRMPBF

Analog Devices

Comparator

Industrial

No Lead

3

VSON

Square

Plastic/Epoxy

10 nA

Yes

1

Tape And Reel

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

18.5 V

0.02 in (0.5 mm)

85 °C (185 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-N3

1

0.031 in (0.8 mm)

0.079 in (2 mm)

No

e3

30 s

260 °C (500 °F)

0.079 in (2 mm)

LT6703IDC-3#PBF

Analog Devices

Comparator

Industrial

No Lead

3

HVSON

Square

Plastic/Epoxy

10 nA

Yes

1

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

18.5 V

0.02 in (0.5 mm)

85 °C (185 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin - annealed

Dual

S-PDSO-N3

1

0.031 in (0.8 mm)

0.079 in (2 mm)

No

e3

30 s

260 °C (500 °F)

0.079 in (2 mm)

MCP6542-I/MS

Microchip Technology

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

7 mV

100 pA

Yes

2

CMOS

2 μA

Tube

5 V

1.6/5.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

7 V

0.026 in (0.65 mm)

85 °C (185 °F)

4 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

40

260 °C (500 °F)

0.118 in (3 mm)

TLV3702IDGKRG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

7 mV

1.5 nA

Yes

2

CMOS

1.6 μA

0 V

Tape And Reel

5 V

±1.35/±8/2.7/16 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

17 V

0.026 in (0.65 mm)

125 °C (257 °F)

100 pA

240 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

INA301A2QDGKTQ1

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

50 uV

Yes

1

100 dB

AEC-Q100

700 μA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

4 V/us

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

36 V

750 ns

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold Silver

Dual

S-PDSO-G8

2

0.043 in (1.1 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

MCP6542T-E/MS

Microchip Technology

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

7 mV

5 nA

Yes

2

CMOS

1 μA

Tape And Reel

5 V

1.6/5.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

4 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

TS3022IST

STMicroelectronics

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

10 mV

300 nA

Yes

2

135 μA

Tape And Reel

2 V

1.8/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

160 nA

42 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

MCP6542T-E/MSVAO

Microchip Technology

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

7 mV

5 nA

Yes

2

CMOS

TS 16949

2 μA

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

4 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

0.043 in (1.1 mm)

0.118 in (3 mm)

e3

0.118 in (3 mm)

LM2903ITL/NOPB

Texas Instruments

Comparator

Industrial

Ball

8

FBGA

Square

Plastic/Epoxy

0 V

15 mV

500 nA

Yes

2

BIPOLAR

1 mA

0 V

Tape And Reel

5 V

5 V

Grid Array, Fine Pitch

BGA8,3X3,20

Comparators

36 V

0.02 in (0.5 mm)

85 °C (185 °F)

250 nA

1.5 µs

Open-Collector

-40 °C (-40 °F)

Tin/Silver/Copper

Bottom

S-PBGA-B8

1

0.027 in (0.675 mm)

0.06 in (1.514 mm)

No

e1

260 °C (500 °F)

0.06 in (1.514 mm)

LM2903YST

STMicroelectronics

Comparator

Gull Wing

8

HTSSOP

Square

Plastic/Epoxy

15 mV

400 nA

Yes

2

BIPOLAR

AEC-Q100

2.5 mA

Tape And Reel

5 V

Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch

TSOP8,.19

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Dual

S-PDSO-G8

0.043 in (1.1 mm)

0.118 in (3 mm)

0.118 in (3 mm)

TLV6700QDSERQ1

Texas Instruments

Comparator

Automotive

No Lead

6

SON

Square

Plastic/Epoxy

2 mV

15 nA

Yes

2

AEC-Q100

26 μA

Tape And Reel

5 V

Small Outline

SOLCC6,.06,20

Comparators

20 V

0.02 in (0.5 mm)

125 °C (257 °F)

15 nA

18 µs

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold Silver

Dual

S-PDSO-N6

2

0.031 in (0.8 mm)

0.059 in (1.5 mm)

e4

30 s

260 °C (500 °F)

0.059 in (1.5 mm)

INA300AQDGSRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

650 uV

10 uA

Yes

1

96 dB

AEC-Q100

135 μA

Tape And Reel

3.3 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

10 uA

36 V

100 µs

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold Silver

Dual

S-PDSO-G10

2

0.043 in (1.1 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LT1720IMS8#PBF

Analog Devices

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

4.5 mV

-6 uA

Yes

2

BIPOLAR

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

7 V

0.026 in (0.65 mm)

85 °C (185 °F)

7 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.046 in (1.17 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LM2903BWDSGRQ1

Texas Instruments

Comparator

Automotive

No Lead

8

HVSON

Square

Plastic/Epoxy

2.5 mV

50 nA

Yes

2

BIPOLAR

AEC-Q100

1.6 mA

Tape And Reel

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC8,.08,20

Comparators

36 V

0.02 in (0.5 mm)

125 °C (257 °F)

25 nA

1 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-N8

2

0.031 in (0.8 mm)

0.079 in (2 mm)

e3

30 s

260 °C (500 °F)

0.079 in (2 mm)

LM293ST

STMicroelectronics

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

9 mV

400 nA

Yes

2

BIPOLAR

2.5 mA

0 V

Tape And Reel

5 V

±1/±18/2/36 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

36 V

0.026 in (0.65 mm)

105 °C (221 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

TLV3702IDGK

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

7 mV

1.5 nA

Yes

2

CMOS

1.6 μA

0 V

Tube

5 V

±1.35/±8/2.7/16 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

17 V

0.026 in (0.65 mm)

125 °C (257 °F)

100 pA

240 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

INA301A1QDGKRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

125 uV

Yes

1

100 dB

AEC-Q100

700 μA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

4 V/us

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

36 V

750 ns

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold Silver

Dual

S-PDSO-G8

2

0.043 in (1.1 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LT1713IMS8#PBF

Analog Devices

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-6.3 V

4 mV

5 uA

Yes

1

-5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

6.3 V

0.026 in (0.65 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

TLV3702IDGKR

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

7 mV

1.5 nA

Yes

2

CMOS

1.6 μA

0 V

Tape And Reel

5 V

±1.35/±8/2.7/16 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

17 V

0.026 in (0.65 mm)

125 °C (257 °F)

100 pA

240 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

TLV4031R1YKAR

Texas Instruments

Comparator

Automotive

Ball

4

VFBGA

Square

Yes

1

5 μA

Tape And Reel

1.8 V

Grid Array, Very Thin Profile, Fine Pitch

BGA4,2X2,14

Comparators

6 V

0.014 in (0.35 mm)

125 °C (257 °F)

360 ns

Open-Drain

-40 °C (-40 °F)

Tin/Silver/Copper

Bottom

S-XBGA-B4

1

0.016 in (0.4 mm)

0.029 in (0.73 mm)

e1

260 °C (500 °F)

0.029 in (0.73 mm)

INA301A3QDGKRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

35 uV

Yes

1

100 dB

AEC-Q100

700 μA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

4 V/us

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

36 V

750 ns

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold Silver

Dual

S-PDSO-G8

2

0.043 in (1.1 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

TLV3402IDGK

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

2

1.28 μA

0 V

Tube

5 V

±1.35/±8/2.7/16 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

17 V

0.026 in (0.65 mm)

125 °C (257 °F)

100 pA

175 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

PLM393BIDGKR

Texas Instruments

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

2 mV

25 nA

Yes

2

BIPOLAR

800 μA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

38 V

0.026 in (0.65 mm)

85 °C (185 °F)

25 nA

1 µs

Open-Collector

-40 °C (-40 °F)

Dual

S-PDSO-G8

0.043 in (1.1 mm)

0.118 in (3 mm)

0.118 in (3 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.