Square Comparators 1,068

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Minimum Isolation Voltage Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Sub-Category Nominal Slow Rate Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Nominal Response Time Output Type Minimum Operating Temperature Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

ADCMP607BCPZ-R2

Analog Devices

Comparator

Automotive

No Lead

12

HVQCCN

Square

5 mV

5 uA

Yes

1

BIPOLAR

1.5 mA

Tape And Reel

2.5 V

3/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC12,.12SQ,20

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

5 uA

2.1 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N12

3

0.039 in (1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

LT1711CMS8#TRPBF

Analog Devices

Comparator

Commercial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-6.3 V

6 mV

10 uA

Yes

1

-5 V

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

6.3 V

0.026 in (0.65 mm)

70 °C (158 °F)

5.5 ns

0 °C (32 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

MAX975EUA-T

Maxim Integrated

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

3 mV

-400 nA

Yes

1

CMOS

6 μA

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

400 nA

28 ns

-40 °C (-40 °F)

Tin Lead

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

0.118 in (3 mm)

MAX975EUA+T

Analog Devices

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

3 mV

-400 nA

Yes

1

CMOS

6 μA

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

400 nA

28 ns

-40 °C (-40 °F)

Matte Tin - annealed

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

TLV6703QDSERQ1

Texas Instruments

Comparator

No Lead

6

VSON

Square

Plastic/Epoxy

2 mV

Yes

1

AEC-Q100

13 μA

Tape And Reel

5 V

Small Outline, Very Think Profile

SOLCC6,.06,20

Comparators

20 V

0.02 in (0.5 mm)

125 °C (257 °F)

25 nA

29 µs

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold Silver

Dual

S-PDSO-N6

2

0.031 in (0.8 mm)

0.059 in (1.5 mm)

e4

30 s

260 °C (500 °F)

0.059 in (1.5 mm)

TS882IST

STMicroelectronics

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

6 mV

99 pA

Yes

2

1 μA

Tape And Reel

1.2 V

1.2/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

5.5 µs

Push-Pull

-40 °C (-40 °F)

Dual

S-PDSO-G8

0.043 in (1.1 mm)

0.118 in (3 mm)

No

0.118 in (3 mm)

LMH7322SQX/NOPB

Texas Instruments

Comparator

Automotive

No Lead

24

HVQCCN

Square

8 mV

Yes

2

5 V

2.7/5/12 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC24,.16SQ,20

Comparators

13.2 V

0.02 in (0.5 mm)

125 °C (257 °F)

0.783 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N24

3

0.031 in (0.8 mm)

0.157 in (4 mm)

No

e3

30 s

260 °C (500 °F)

0.157 in (4 mm)

MAX9963BGCCQ-TD

Maxim Integrated

Comparator

Commercial

Gull Wing

100

HTFQFP

Square

Plastic/Epoxy

-7 V

100 mV

25 uA

Yes

4

BIPOLAR

-5.25 V

9.75 V

Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch

Comparators

11.5 V

0.02 in (0.5 mm)

70 °C (158 °F)

2.2 ns

Open-Collector

0 °C (32 °F)

Tin Lead

Quad

S-PQFP-G100

3

0.047 in (1.2 mm)

0.551 in (14 mm)

No

e0

0.551 in (14 mm)

MAX9963BGCCQ+TD

Analog Devices

Comparator

Commercial

Gull Wing

100

HTFQFP

Square

Plastic/Epoxy

-7 V

100 mV

25 uA

Yes

4

BIPOLAR

-5.25 V

9.75 V

Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch

Comparators

11.5 V

0.02 in (0.5 mm)

70 °C (158 °F)

2.2 ns

Open-Collector

0 °C (32 °F)

Matte Tin - annealed

Quad

S-PQFP-G100

3

0.047 in (1.2 mm)

0.551 in (14 mm)

No

e3

30 s

260 °C (500 °F)

0.551 in (14 mm)

MCP6542T-E/MSV02

Microchip Technology

Comparator

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

7 mV

5 nA

Yes

2

CMOS

20 μA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

4 µs

Push-Pull

-40 °C (-40 °F)

Dual

S-PDSO-G8

0.043 in (1.1 mm)

0.118 in (3 mm)

0.118 in (3 mm)

PTLV7011DPWR

Texas Instruments

Comparator

Automotive

Butt

5

HVBCC

Square

Plastic/Epoxy

800 uV

5 pA

Yes

1

Chip Carrier, Heat Sink/Slug, Very Thin Profile

Comparators

5 V

125 °C (257 °F)

350 ns

-40 °C (-40 °F)

Bottom

S-PBCC-B5

0.016 in (0.4 mm)

0.031 in (0.8 mm)

0.031 in (0.8 mm)

TLV4021R2YKAR

Texas Instruments

Comparator

Automotive

Ball

4

VFBGA

Square

Yes

1

5 μA

Tape And Reel

1.8 V

Grid Array, Very Thin Profile, Fine Pitch

BGA4,2X2,14

Comparators

6 V

0.014 in (0.35 mm)

125 °C (257 °F)

360 ns

Open-Drain

-40 °C (-40 °F)

Tin/Silver/Copper

Bottom

S-XBGA-B4

1

0.016 in (0.4 mm)

0.029 in (0.73 mm)

e1

260 °C (500 °F)

0.029 in (0.73 mm)

TLV7031DPWR

Texas Instruments

Comparator

Automotive

Bu

5

VBCC

Square

Plastic/Epoxy

8 mV

2 pA

Yes

1

900 nA

1.8 V

Chip Carrier, Very Thin Profile

Comparators

7 V

0.019 in (0.48 mm)

125 °C (257 °F)

2 pA

4.5 ns

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Bottom

S-PBCC-B5

1

0.016 in (0.4 mm)

0.031 in (0.8 mm)

e4

0.031 in (0.8 mm)

TLV9022DGKR

Texas Instruments

Comparator

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

2 mV

Yes

2

70 μA

Tape And Reel, 13 Inch

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

150 ns

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

e3

260 °C (500 °F)

0.118 in (3 mm)

TS332IST

STMicroelectronics

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

6 mV

100 nA

Yes

2

38 μA

Tape And Reel

1.8 V

1.8/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

420 ns

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LM2903Q2T

STMicroelectronics

Comparator

No Lead

8

HVSON

Square

15 mV

400 nA

Yes

2

BIPOLAR

2.5 mA

Tape And Reel

5 V

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC8,.08,20

Comparators

36 V

0.02 in (0.5 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin - annealed

Dual

S-XDSO-N8

1

0.024 in (0.6 mm)

0.079 in (2 mm)

No

e3

30 s

260 °C (500 °F)

0.079 in (2 mm)

LMC6772AIMM

Texas Instruments

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

8 mV

0.4 pA

Yes

2

CMOS

20 μA

0 V

Tape And Reel

5 V

2.7/15 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

16 V

0.026 in (0.65 mm)

85 °C (185 °F)

0.4 pA

4 µs

Open-Collector

-40 °C (-40 °F)

Tin/Lead

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

260 °C (500 °F)

0.118 in (3 mm)

LMC6772QMM

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

13 mV

Yes

2

CMOS

0 V

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

16 V

0.026 in (0.65 mm)

125 °C (257 °F)

4 µs

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

S-PDSO-G8

1

0.043 in (1.09 mm)

0.118 in (3 mm)

No

e0

40

260 °C (500 °F)

0.118 in (3 mm)

LMC6772QMMX

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

13 mV

Yes

2

CMOS

0 V

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

16 V

0.026 in (0.65 mm)

125 °C (257 °F)

4 µs

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

S-PDSO-G8

1

0.043 in (1.09 mm)

0.118 in (3 mm)

No

e0

40

260 °C (500 °F)

0.118 in (3 mm)

LT6703CDC-2#TRPBF

Analog Devices

Comparator

Industrial

No Lead

3

HVSON

Square

Plastic/Epoxy

10 nA

Yes

1

Tape And Reel

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

18.5 V

0.02 in (0.5 mm)

85 °C (185 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-N3

1

0.031 in (0.8 mm)

0.079 in (2 mm)

No

e3

30 s

260 °C (500 °F)

0.079 in (2 mm)

LT6703HDC-2#PBF

Analog Devices

Comparator

Automotive

No Lead

3

HVSON

Square

Plastic/Epoxy

10 nA

Yes

1

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

18.5 V

0.02 in (0.5 mm)

125 °C (257 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin - annealed

Dual

S-PDSO-N3

1

0.031 in (0.8 mm)

0.079 in (2 mm)

No

e3

30 s

260 °C (500 °F)

0.079 in (2 mm)

LT6703IDC-3#TRPBF

Analog Devices

Comparator

Industrial

No Lead

3

HVSON

Square

Plastic/Epoxy

10 nA

Yes

1

Tape And Reel

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

18.5 V

0.02 in (0.5 mm)

85 °C (185 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-N3

1

0.031 in (0.8 mm)

0.079 in (2 mm)

No

e3

30 s

260 °C (500 °F)

0.079 in (2 mm)

LTC6702IDC#TRMPBF

Analog Devices

Comparator

Industrial

No Lead

8

HVSON

Square

Plastic/Epoxy

5 mV

Yes

2

Tape And Reel

3 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

6 V

0.018 in (0.45 mm)

85 °C (185 °F)

500 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-N8

1

0.031 in (0.8 mm)

0.079 in (2 mm)

No

e3

30 s

260 °C (500 °F)

0.079 in (2 mm)

MAX9963BGCCQ

Maxim Integrated

Comparator

Commercial

Gull Wing

100

HTFQFP

Square

Plastic/Epoxy

-7 V

100 mV

25 uA

Yes

4

BIPOLAR

-5.25 V

9.75 V

Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch

Comparators

11.5 V

0.02 in (0.5 mm)

70 °C (158 °F)

2.2 ns

Open-Collector

0 °C (32 °F)

Tin Lead

Quad

S-PQFP-G100

3

0.047 in (1.2 mm)

0.551 in (14 mm)

No

e0

0.551 in (14 mm)

MCP6541-I/MS

Microchip Technology

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

7 mV

100 pA

Yes

1

CMOS

1 μA

Tube

5 V

1.6/5.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

7 V

0.026 in (0.65 mm)

85 °C (185 °F)

4 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

40

260 °C (500 °F)

0.118 in (3 mm)

MCP6546-E/MS

Microchip Technology

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

7 mV

5 nA

Yes

1

CMOS

TS 16949

1 μA

Tube

5 V

1.6/5.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

3 µs

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

40

260 °C (500 °F)

0.118 in (3 mm)

MCP6546-I/MS

Microchip Technology

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

7 mV

100 pA

Yes

1

CMOS

TS 16949

1 μA

Tube

5 V

1.6/5.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

7 V

0.026 in (0.65 mm)

85 °C (185 °F)

3 µs

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

40

260 °C (500 °F)

0.118 in (3 mm)

TLV3691IDPFR

Texas Instruments

Comparator

Automotive

No Lead

6

VSON

Square

Plastic/Epoxy

22 mV

20 nA

Yes

1

150 nA

Tape And Reel

0.9/6.5 V

Small Outline, Very Think Profile

SOLCC6,.04,14

Comparators

7 V

0.014 in (0.35 mm)

125 °C (257 °F)

100 pA

40 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

S-PDSO-N6

1

0.016 in (0.4 mm)

0.039 in (1 mm)

No

e4

260 °C (500 °F)

0.039 in (1 mm)

TLV9022DSGR

Texas Instruments

Comparator

No Lead

8

HVSON

Square

Plastic/Epoxy

2 mV

Yes

2

70 μA

Tape And Reel, 7 Inch

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC8,.08,20

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

150 ns

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

S-PDSO-N8

1

0.031 in (0.8 mm)

0.079 in (2 mm)

e4

260 °C (500 °F)

0.079 in (2 mm)

TLV9022QDGKRQ1

Texas Instruments

Comparator

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

2 mV

Yes

2

AEC-Q100

70 μA

Tape And Reel, 13 Inch

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

150 ns

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

e4

260 °C (500 °F)

0.118 in (3 mm)

TLV9034RTER

Texas Instruments

Comparator

Automotive

No Lead

16

HVQCCN

Square

Plastic/Epoxy

2 mV

Yes

4

140 μA

Tape And Reel, 13 Inch

5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.12SQ,20

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

115 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Quad

S-PQCC-N16

1

0.031 in (0.8 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

TS391IQ2T

STMicroelectronics

Comparator

Automotive

No Lead

8

HVSON

Square

Plastic/Epoxy

9 mV

400 nA

Yes

1

BIPOLAR

1.25 mA

Tape And Reel

5 V

±1/±18/2/36 V

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC8,.08,20

Comparators

36 V

0.02 in (0.5 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin - annealed

Dual

S-PDSO-N8

1

0.024 in (0.6 mm)

0.079 in (2 mm)

No

e3

30 s

260 °C (500 °F)

0.079 in (2 mm)

ADCMP603BCPZ-WP

Analog Devices

Comparator

Automotive

No Lead

12

HVQCCN

Square

5 mV

5 uA

Yes

1

CMOS

3/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC12,.12SQ,20

Comparators

5.5 V

0.02 in (0.5 mm)

125 °C (257 °F)

5 uA

5 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N12

3

0.039 in (1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

LM2903ST

STMicroelectronics

Comparator

Gull Wing

8

HTSSOP

Square

Plastic/Epoxy

15 mV

400 nA

Yes

2

BIPOLAR

2.5 mA

Tape And Reel

5 V

Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch

TSOP8,.19

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Dual

S-PDSO-G8

0.043 in (1.1 mm)

0.118 in (3 mm)

0.118 in (3 mm)

LM2903YQ3T

STMicroelectronics

Comparator

No Lead

8

HVSON

Square

15 mV

400 nA

Yes

2

BIPOLAR

AEC-Q100

2.5 mA

Tape And Reel

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC8,.08,20

Comparators

36 V

0.02 in (0.5 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Dual

S-XDSO-N8

1

0.031 in (0.8 mm)

0.079 in (2 mm)

0.079 in (2 mm)

LT1671CMS8#TRPBF

Analog Devices

Comparator

Commercial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-7 V

4 mV

350 nA

Yes

1

-5 V

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

7 V

0.026 in (0.65 mm)

70 °C (158 °F)

85 ns

0 °C (32 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.046 in (1.17 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LMV339IRUCR

Texas Instruments

Comparator

Automotive

No Lead

14

VQCCN

Square

Plastic/Epoxy

9 mV

400 nA

Yes

4

BIPOLAR

400 μA

Tape And Reel

5 V

3/5 V

Chip Carrier, Very Thin Profile

LCC14,.08SQ,16

Comparators

5.5 V

0.016 in (0.4 mm)

125 °C (257 °F)

250 nA

600 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

Quad

S-PQCC-N14

1

0.016 in (0.4 mm)

0.079 in (2 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

ADCMP581BCPZ-RL7

Analog Devices

Comparator

Automotive

No Lead

16

HVQCCN

Square

-6 V

10 mV

30 uA

Yes

1

BIPOLAR

19 mA

-5 V

5 V

±5,3.3 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.12SQ,20

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

30 uA

0.18 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N16

3

0.035 in (0.9 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

LTC1540CDD#PBF

Analog Devices

Comparator

Commercial

No Lead

8

HVSON

Square

Plastic/Epoxy

0 V

15 mV

Yes

1

0 V

3 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

12 V

0.02 in (0.5 mm)

70 °C (158 °F)

70 µs

0 °C (32 °F)

Matte Tin

Dual

S-PDSO-N8

1

0.033 in (0.85 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LT1720CMS8#PBF

Analog Devices

Comparator

Commercial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

4.5 mV

-6 uA

Yes

2

BIPOLAR

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

7 V

0.026 in (0.65 mm)

70 °C (158 °F)

7 ns

Push-Pull

0 °C (32 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LTC1440CMS8#PBF

Analog Devices

Comparator

Commercial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-0.3 V

10 mV

Yes

1

CMOS

0 V

3 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

12 V

0.026 in (0.65 mm)

70 °C (158 °F)

14 µs

0 °C (32 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

HA4-4902/883

Intersil

Comparator

Military

No Lead

20

QCCN

Square

Ceramic

8 mV

Yes

4

BIPOLAR

38535Q/M;38534H;883B

20 mA

5,±15 V

Chip Carrier

LCC20,.35SQ

Comparators

0.05 in (1.27 mm)

125 °C (257 °F)

150 nA

180 ns

-55 °C (-67 °F)

Tin/Lead

Quad

S-XQCC-N20

No

e0

LM393FVJ-E2

ROHM

Comparator

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

5 mV

500 nA

Yes

2

1.5 mA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

36 V

0.026 in (0.65 mm)

85 °C (185 °F)

250 nA

1 µs

Open-Collector

-40 °C (-40 °F)

Dual

S-PDSO-G8

0.043 in (1.1 mm)

0.118 in (3 mm)

0.118 in (3 mm)

5962-87739012X

Texas Instruments

Comparator

Military

No Lead

20

QCCN

Square

Ceramic, Metal-Sealed Cofired

0 V

4 mV

-300 nA

Yes

4

BIPOLAR

MIL-STD-883

3 mA

0 V

5 V

Chip Carrier

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

1.3 µs

Open-Collector

-55 °C (-67 °F)

Quad

S-CQCC-N20

0.08 in (2.03 mm)

0.35 in (8.89 mm)

Yes

0.35 in (8.89 mm)

AD8465WBCPZ-WP

Analog Devices

Comparator

Automotive

No Lead

12

HVQCCN

Square

5 mV

5 uA

Yes

1

AEC-Q100

3 mA

2.5 V

3/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC12,.12SQ,20

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

5 uA

1.6 ns

Open-Collector

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N12

3

0.039 in (1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

ADCMP565BP

Analog Devices

Comparator

Industrial

J Bend

20

QCCJ

Square

Plastic/Epoxy

-6 V

6 mV

40 uA

Yes

2

BIPOLAR

-5.2 V

5 V

5,-5.2 V

Chip Carrier

LDCC20,.4SQ

Comparators

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

40 uA

0.375 ns

Open-Emitter

-40 °C (-40 °F)

Tin Lead

Quad

S-PQCC-J20

1

0.18 in (4.57 mm)

0.353 in (8.965 mm)

No

e0

225 °C (437 °F)

0.353 in (8.965 mm)

ADCMP567BCPZ

Analog Devices

Comparator

Industrial

No Lead

32

HVQCCN

Square

-6 V

5 mV

42 uA

Yes

2

20 mA

-5.2 V

5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC32,.2SQ,20

Comparators

6 V

0.02 in (0.5 mm)

85 °C (185 °F)

42 uA

0.3 ns

Open-Emitter

-40 °C (-40 °F)

Matte Tin - annealed

Quad

S-XQCC-N32

3

0.031 in (0.8 mm)

0.197 in (5 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADCMP582BCPZ-RL7

Analog Devices

Comparator

Automotive

No Lead

16

HVQCCN

Square

-6 V

10 mV

30 uA

Yes

1

BIPOLAR

8 mA

-5 V

5 V

±5,3.3 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.12SQ,20

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

30 uA

0.18 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N16

3

0.035 in (0.9 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.