Square Comparators 1,068

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Minimum Isolation Voltage Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Sub-Category Nominal Slow Rate Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Nominal Response Time Output Type Minimum Operating Temperature Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

TLV1702AIRUGR

Texas Instruments

Comparator

Automotive

No Lead

8

VQCCN

Square

Plastic/Epoxy

5.5 mV

20 uA

Yes

2

BIPOLAR

150 μA

Chip Carrier, Very Thin Profile

Comparators

40 V

0.02 in (0.5 mm)

125 °C (257 °F)

15 nA

560 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

Quad

S-PQCC-N8

1

0.016 in (0.4 mm)

0.059 in (1.5 mm)

e4

30 s

260 °C (500 °F)

0.059 in (1.5 mm)

LM393BIDSGR

Texas Instruments

Comparator

Industrial

No Lead

8

HVSON

Square

Plastic/Epoxy

2.5 mV

25 nA

Yes

2

800 μA

Tape And Reel

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC8,.08,20

Comparators

38 V

0.02 in (0.5 mm)

85 °C (185 °F)

25 nA

1 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

S-PDSO-N8

1

0.031 in (0.8 mm)

0.079 in (2 mm)

e4

30 s

260 °C (500 °F)

0.079 in (2 mm)

LT1715CMS#PBF

Analog Devices

Comparator

Commercial

Gull Wing

10

HTSSOP

Square

Plastic/Epoxy

-7 V

3.5 mV

-6 uA

Yes

2

BIPOLAR

-5 V

5 V

Small Outline

Comparators

7 V

0.02 in (0.5 mm)

70 °C (158 °F)

Push-Pull

0 °C (32 °F)

Matte Tin

Dual

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LM2903QM8-13

Diodes Incorporated

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

15 mV

500 nA

Yes

2

AEC-Q100

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

1.3 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

0.043 in (1.1 mm)

0.118 in (3 mm)

e3

10 s

260 °C (500 °F)

0.118 in (3 mm)

LMC6772QMMX/NOPB

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

10 mV

0.4 pA

Yes

2

CMOS

AEC-Q100

20 μA

Tape And Reel

2.7 V

2.7/15 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

16 V

0.026 in (0.65 mm)

125 °C (257 °F)

0.4 pA

5 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LTC1540CMS8#TRPBF

Analog Devices

Comparator

Commercial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

16 mV

Yes

1

CMOS

0 V

Tape And Reel

3 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

12 V

0.026 in (0.65 mm)

70 °C (158 °F)

70 µs

0 °C (32 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LM2903AQM8-13

Diodes Incorporated

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

4 mV

500 nA

Yes

2

AEC-Q100

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

1.3 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

0.043 in (1.1 mm)

0.118 in (3 mm)

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LT6703HDC-2#TRMPBF

Analog Devices

Comparator

Automotive

No Lead

3

HVSON

Square

Plastic/Epoxy

10 nA

Yes

1

Tape And Reel

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

18.5 V

0.02 in (0.5 mm)

125 °C (257 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-N3

1

0.031 in (0.8 mm)

0.079 in (2 mm)

No

e3

30 s

260 °C (500 °F)

0.079 in (2 mm)

LTC1540IDD#TRPBF

Analog Devices

Comparator

Industrial

No Lead

8

VSON

Square

Plastic/Epoxy

0 V

15 mV

Yes

1

0 V

Tape And Reel

3 V

Small Outline, Very Think Profile

Comparators

12 V

0.02 in (0.5 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-N8

1

0.033 in (0.85 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LM139AFKB

Texas Instruments

Comparator

Military

No Lead

20

QCCN

Square

Ceramic, Metal-Sealed Cofired

2 mV

25 nA

Yes

4

BIPOLAR

MIL-STD-883

2 mA

Tube

5 V

5 V

Chip Carrier

LCC20,.35SQ

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

25 nA

1.3 µs

Open-Collector

-55 °C (-67 °F)

Tin Lead

Quad

S-CQCC-N20

0.08 in (2.03 mm)

0.35 in (8.89 mm)

No

e0

0.35 in (8.89 mm)

ADCMP573BCPZ-RL7

Analog Devices

Comparator

Industrial

No Lead

16

HVQCCN

Square

5 mV

Yes

1

BIPOLAR

80 mA

3.3 V

3.3/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.12SQ,20

Comparators

6 V

0.02 in (0.5 mm)

85 °C (185 °F)

50 uA

0.165 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N16

3

0.039 in (1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

INA300AIDSQR

Texas Instruments

Comparator

Automotive

No Lead

10

HVSON

Square

Plastic/Epoxy

500 uV

10 uA

Yes

1

100 dB

135 μA

Tape And Reel

3.3 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

6 V

0.016 in (0.4 mm)

125 °C (257 °F)

10 nA

36 V

100 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

S-PDSO-N10

2

0.031 in (0.8 mm)

0.118 in (3 mm)

e4

260 °C (500 °F)

0.118 in (3 mm)

TSX393IQ2T

STMicroelectronics

Comparator

Automotive

No Lead

8

VSON

Square

Plastic/Epoxy

6 mV

1.2 nA

Yes

2

CMOS

Tape And Reel

3 V

Small Outline, Very Think Profile

Comparators

18 V

0.02 in (0.5 mm)

125 °C (257 °F)

2.5 µs

Open-Drain

-40 °C (-40 °F)

Dual

S-PDSO-N8

0.031 in (0.8 mm)

0.079 in (2 mm)

0.079 in (2 mm)

LT1715IMS#PBF

Analog Devices

Comparator

Industrial

Gull Wing

10

HTSSOP

Square

Plastic/Epoxy

-7 V

3.5 mV

-6 uA

Yes

2

BIPOLAR

-5 V

5 V

Small Outline

Comparators

7 V

0.02 in (0.5 mm)

85 °C (185 °F)

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

MCP6547T-E/MS

Microchip Technology

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

7 mV

5 nA

Yes

2

CMOS

TS 16949

1 μA

Tape And Reel

5 V

1.6/5.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

3 µs

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

40

260 °C (500 °F)

0.118 in (3 mm)

NCS2220AMUT1G

Onsemi

Comparator

Industrial

No Lead

8

HVSON

Square

Plastic/Epoxy

8 mV

Yes

2

CMOS

17 μA

3 V

1/5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC8,.06,16

Comparators

6 V

0.016 in (0.4 mm)

105 °C (221 °F)

500 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-N8

1

0.022 in (0.55 mm)

0.063 in (1.6 mm)

No

e3

30 s

260 °C (500 °F)

0.063 in (1.6 mm)

LMV393MM

Texas Instruments

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

7 mV

250 nA

Yes

2

BICMOS

100 μA

0 V

Tape And Reel

2.7 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

5.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

250 nA

450 ns

Open-Collector

-40 °C (-40 °F)

Tin/Lead

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

40

260 °C (500 °F)

0.118 in (3 mm)

LT6703CDC-2#TRMPBF

Analog Devices

Comparator

Industrial

No Lead

3

HVSON

Square

Plastic/Epoxy

10 nA

Yes

1

Tape And Reel

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

18.5 V

0.02 in (0.5 mm)

85 °C (185 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-N3

1

0.031 in (0.8 mm)

0.079 in (2 mm)

No

e3

30 s

260 °C (500 °F)

0.079 in (2 mm)

TLV3402CDGKR

Texas Instruments

Comparator

Commercial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

2

1.28 μA

0 V

Tape And Reel

2.7 V

±1.25/±8/2.5/16 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

17 V

0.026 in (0.65 mm)

70 °C (158 °F)

100 pA

175 µs

Open-Drain

0 °C (32 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

LM393LVDSGR

Texas Instruments

Comparator

No Lead

8

HVSON

Square

Plastic/Epoxy

3 mV

Yes

2

100 μA

Tape And Reel, 7 Inch

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC8,.08,20

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

600 ns

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

S-PDSO-N8

1

0.031 in (0.8 mm)

0.079 in (2 mm)

e4

260 °C (500 °F)

0.079 in (2 mm)

LMV393IDGKRG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

9 mV

400 nA

Yes

2

BIPOLAR

300 μA

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

600 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

MCP6547T-E/MSVAO

Microchip Technology

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

7 mV

5 nA

Yes

2

CMOS

AEC-Q100

2 μA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

3 µs

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

0.043 in (1.1 mm)

0.118 in (3 mm)

e3

0.118 in (3 mm)

TLV3402IDGKG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

2

1.28 μA

0 V

Tube

5 V

±1.35/±8/2.7/16 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

17 V

0.026 in (0.65 mm)

125 °C (257 °F)

100 pA

175 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

LM393LVDGKR

Texas Instruments

Comparator

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

3 mV

Yes

2

100 μA

Tape And Reel, 13 Inch

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

600 ns

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

e3

260 °C (500 °F)

0.118 in (3 mm)

LT6703HDC-3#PBF

Analog Devices

Comparator

Automotive

No Lead

3

HVSON

Square

Plastic/Epoxy

10 nA

Yes

1

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

18.5 V

0.02 in (0.5 mm)

125 °C (257 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin - annealed

Dual

S-PDSO-N3

1

0.031 in (0.8 mm)

0.079 in (2 mm)

No

e3

30 s

260 °C (500 °F)

0.079 in (2 mm)

ADCMP572BCPZ-WP

Analog Devices

Comparator

Industrial

No Lead

16

HVQCCN

Square

5 mV

Yes

1

BIPOLAR

52 mA

3.3 V

3.3/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.12SQ,20

Comparators

6 V

0.02 in (0.5 mm)

85 °C (185 °F)

50 uA

0.165 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N16

3

0.039 in (1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

LM393LVQDGKRQ1

Texas Instruments

Comparator

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

3 mV

Yes

2

AEC-Q100

100 μA

Tape And Reel, 13 Inch

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

600 ns

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

e4

260 °C (500 °F)

0.118 in (3 mm)

LMH7322SQE/NOPB

Texas Instruments

Comparator

Automotive

No Lead

24

HVQCCN

Square

8 mV

5 uA

Yes

2

30 mA

Tape And Reel

5 V

2.7/5/12 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC24,.16SQ,20

Comparators

13.2 V

0.02 in (0.5 mm)

125 °C (257 °F)

5 uA

0.783 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N24

3

0.031 in (0.8 mm)

0.157 in (4 mm)

No

e3

30 s

260 °C (500 °F)

0.157 in (4 mm)

LT1715IMS#TRPBF

Analog Devices

Comparator

Industrial

Gull Wing

10

HTSSOP

Square

Plastic/Epoxy

-7 V

3.5 mV

-6 uA

Yes

2

BIPOLAR

-5 V

Tape And Reel

5 V

Small Outline

Comparators

7 V

0.02 in (0.5 mm)

85 °C (185 °F)

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LMH7322SQ/NOPB

Texas Instruments

Comparator

Automotive

No Lead

24

VQCCN

Square

Plastic/Epoxy

8 mV

2.9 uA

Yes

2

30 mA

Tape And Reel

5 V

2.7/5/12 V

Chip Carrier, Very Thin Profile

LCC24,.16SQ,20

Comparators

12 V

0.02 in (0.5 mm)

125 °C (257 °F)

5 uA

0.783 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-PQCC-N24

3

0.031 in (0.8 mm)

0.157 in (4 mm)

No

e3

30 s

260 °C (500 °F)

0.157 in (4 mm)

TLV7032DSGR

Texas Instruments

Comparator

Automotive

No Lead

8

Square

Plastic

8 mV

2 pA

2

1.5 μA

Small Outline, Very Think Profile

0.02 in (0.5 mm)

125 °C (257 °F)

2 pA

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

S-PDSO-N8

1

0.031 in (0.8 mm)

0.079 in (2 mm)

e4

30 s

260 °C (500 °F)

0.079 in (2 mm)

LM393TL/NOPB

Texas Instruments

Comparator

Commercial

Ball

8

FBGA

Square

Plastic/Epoxy

0 V

9 mV

400 nA

Yes

2

BIPOLAR

1 mA

0 V

Tape And Reel

5 V

5 V

Grid Array, Fine Pitch

BGA8,3X3,20

Comparators

36 V

0.02 in (0.5 mm)

70 °C (158 °F)

250 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Tin/Silver/Copper

Bottom

S-PBGA-B8

1

0.027 in (0.675 mm)

0.06 in (1.514 mm)

No

e1

260 °C (500 °F)

0.06 in (1.514 mm)

LTC1540IDD#PBF

Analog Devices

Comparator

Industrial

No Lead

8

HVSON

Square

Plastic/Epoxy

0 V

15 mV

Yes

1

CMOS

0 V

3 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

12 V

0.02 in (0.5 mm)

85 °C (185 °F)

70 µs

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-N8

1

0.033 in (0.85 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LTC6754HUD#PBF

Analog Devices

Comparator

Automotive

No Lead

12

HVQCCN

Square

Plastic/Epoxy

7.5 mV

2.3 uA

Yes

1

CMOS

2.5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

Comparators

5.5 V

0.02 in (0.5 mm)

125 °C (257 °F)

3 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-PQCC-N12

0.031 in (0.8 mm)

0.118 in (3 mm)

e3

0.118 in (3 mm)

ADCMP582BCPZ-R2

Analog Devices

Comparator

Automotive

No Lead

16

HVQCCN

Square

-6 V

10 mV

30 uA

Yes

1

BIPOLAR

8 mA

-5 V

Tape And Reel

5 V

±5,3.3 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.12SQ,20

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

30 uA

0.18 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N16

3

0.035 in (0.9 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

TLV7041DPWR

Texas Instruments

Comparator

Automotive

Bu

5

VBCC

Square

Plastic/Epoxy

8 mV

2 pA

Yes

1

900 nA

1.8 V

Chip Carrier, Very Thin Profile

Comparators

7 V

0.019 in (0.48 mm)

125 °C (257 °F)

2 pA

3 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Bottom

S-PBCC-B5

1

0.016 in (0.4 mm)

0.031 in (0.8 mm)

e4

0.031 in (0.8 mm)

AD8611ARM-REEL

Analog Devices

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

7 mV

-4 uA

Yes

1

10 mA

0 V

Tape And Reel

3 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

7 V

0.026 in (0.65 mm)

85 °C (185 °F)

4.5 ns

-40 °C (-40 °F)

Tin/Lead (Sn85Pb15)

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

240 °C (464 °F)

0.118 in (3 mm)

LMV393MMX

Texas Instruments

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

7 mV

250 nA

Yes

2

BICMOS

250 μA

0 V

2.7 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

5.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

250 nA

450 ns

Open-Collector

-40 °C (-40 °F)

Tin Lead

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

260 °C (500 °F)

0.118 in (3 mm)

LMV7272TL/NOPB

Texas Instruments

Comparator

Industrial

Ball

8

VFBGA

Square

Plastic/Epoxy

0 V

4 mV

100 nA

Yes

1

BICMOS

28 μA

0 V

Tape And Reel

1.8 V

1.8/5 V

Grid Array, Very Thin Profile, Fine Pitch

BGA8,3X3,20

Comparators

5.5 V

0.02 in (0.5 mm)

85 °C (185 °F)

100 nA

1.8 µs

Push-Pull

-40 °C (-40 °F)

Tin/Silver/Copper

Bottom

S-PBGA-B8

1

0.024 in (0.6 mm)

0.06 in (1.514 mm)

No

e1

260 °C (500 °F)

0.06 in (1.514 mm)

LT1715HMS#TRPBF

Analog Devices

Comparator

Automotive

Gull Wing

10

HTSSOP

Square

Plastic/Epoxy

-7 V

4 mV

-7 uA

Yes

2

BIPOLAR

-5 V

Tape And Reel

5 V

Small Outline

Comparators

7 V

0.02 in (0.5 mm)

125 °C (257 °F)

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

PLM2903BIDGKR

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

2 mV

25 nA

Yes

2

BIPOLAR

800 μA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

38 V

0.026 in (0.65 mm)

125 °C (257 °F)

25 nA

1 µs

Open-Collector

-40 °C (-40 °F)

Dual

S-PDSO-G8

0.043 in (1.1 mm)

0.118 in (3 mm)

0.118 in (3 mm)

TLV7011DPWR

Texas Instruments

Comparator

Automotive

Bu

5

VBCC

Square

Plastic/Epoxy

8 mV

5 pA

Yes

1

10 μA

1.8 V

Chip Carrier, Very Thin Profile

Comparators

6 V

0.019 in (0.48 mm)

125 °C (257 °F)

5 pA

310 ns

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Bottom

S-PBCC-B5

1

0.016 in (0.4 mm)

0.031 in (0.8 mm)

e4

260 °C (500 °F)

0.031 in (0.8 mm)

LM2903AM8-13

Diodes Incorporated

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

15 mV

500 nA

Yes

2

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

1.3 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

0.043 in (1.1 mm)

0.118 in (3 mm)

e3

10 s

260 °C (500 °F)

0.118 in (3 mm)

ADCMP602BRMZ

Analog Devices

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

5 mV

5 uA

Yes

1

BIPOLAR

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

5 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LT1711IMS8#TRPBF

Analog Devices

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-6.3 V

6 mV

10 uA

Yes

1

-5 V

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

6.3 V

0.026 in (0.65 mm)

85 °C (185 °F)

5.5 ns

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LT6703CDC-2#PBF

Analog Devices

Comparator

Industrial

No Lead

3

HVSON

Square

Plastic/Epoxy

10 nA

Yes

1

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

18.5 V

0.02 in (0.5 mm)

85 °C (185 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin - annealed

Dual

S-PDSO-N3

1

0.031 in (0.8 mm)

0.079 in (2 mm)

No

e3

30 s

260 °C (500 °F)

0.079 in (2 mm)

LTC6754HUD#TRPBF

Analog Devices

Comparator

Automotive

No Lead

12

HVQCCN

Square

Plastic/Epoxy

7.5 mV

2.3 uA

Yes

1

CMOS

Tape And Reel

2.5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

Comparators

5.5 V

0.02 in (0.5 mm)

125 °C (257 °F)

3 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-PQCC-N12

0.031 in (0.8 mm)

0.118 in (3 mm)

e3

0.118 in (3 mm)

MAX975EUA

Maxim Integrated

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

3 mV

-400 nA

Yes

1

CMOS

500 μA

5.25 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

400 nA

28 ns

-40 °C (-40 °F)

Tin Lead

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

245 °C (473 °F)

0.118 in (3 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.