Automotive Comparators 1,339

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Minimum Isolation Voltage Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Sub-Category Nominal Slow Rate Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Nominal Response Time Output Type Minimum Operating Temperature Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

TLV7042DDFR

Texas Instruments

Operational Amplifier

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

8 mV

2 pA

Yes

2

1.5 μA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.1

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

2 pA

3 µs

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.043 in (1.1 mm)

0.063 in (1.6 mm)

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

LM2903QDRG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

15 mV

-500 nA

Yes

2

BIPOLAR

1 mA

Tape And Reel

5 V

5 V

Small Outline

SOP8,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

50 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

TLC393QDRG4Q1

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

5 mV

30 pA

Yes

2

CMOS

AEC-Q100

40 μA

Tape And Reel

5 V

5 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

30 pA

2.5 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LMH7322SQE

Texas Instruments

Comparator

Automotive

No Lead

24

VQCCN

Square

Plastic/Epoxy

8 mV

2.9 uA

Yes

1

5 V

Chip Carrier, Very Thin Profile

Comparators

12 V

0.02 in (0.5 mm)

125 °C (257 °F)

0.783 ns

-40 °C (-40 °F)

Tin Lead

Quad

S-PQCC-N24

2

0.031 in (0.8 mm)

0.157 in (4 mm)

No

e0

30 s

235 °C (455 °F)

0.157 in (4 mm)

LM2901N3

Texas Instruments

Comparator

Automotive

Through-Hole

14

DIP

Rectangular

Plastic/Epoxy

15 mV

No

BIPOLAR

2.5 mA

5 V

5 V

In-Line

DIP14,.3

Comparators

0.1 in (2.54 mm)

125 °C (257 °F)

250 nA

1.3 µs

-40 °C (-40 °F)

Dual

R-PDIP-T14

TLV4062DBVR

Texas Instruments

Comparator

Automotive

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

6 mV

15 nA

Yes

2

12 μA

Tape And Reel

3.3 V

Small Outline, Low Profile, Shrink Pitch

SOP6,.11,38

Comparators

7 V

0.037 in (0.95 mm)

125 °C (257 °F)

15 nA

5.5 µs

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

TLV3404IDG4

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

4

2.56 μA

0 V

Tube

5 V

±1.35/±8/2.7/16 V

Small Outline

SOP14,.25

Comparators

17 V

0.05 in (1.27 mm)

125 °C (257 °F)

100 pA

175 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.341 in (8.65 mm)

LMV762QMA/NOPB

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1 mV

5 pA

Yes

2

AEC-Q100

1.4 mA

Tube

2.7/5 V

Small Outline

SOP8,.25

Comparators

0.05 in (1.27 mm)

125 °C (257 °F)

5 pA

120 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.91 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LM2901ID

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

15 mV

-500 nA

Yes

4

BIPOLAR

2.5 mA

5 V

Small Outline

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

1.3 µs

Open-Collector

-40 °C (-40 °F)

Dual

R-PDSO-G14

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

0.341 in (8.65 mm)

TLV4062QDBVRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

6 mV

15 nA

Yes

2

AEC-Q100

12 μA

Tape And Reel

3.3 V

Small Outline, Low Profile, Shrink Pitch

SOP6,.11,38

Comparators

7 V

0.037 in (0.95 mm)

125 °C (257 °F)

15 nA

5.5 µs

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

2

0.057 in (1.45 mm)

0.063 in (1.6 mm)

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

TLV3494AIDRG4

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

15 mV

10 pA

Yes

4

CMOS

1.2 μA

5 V

2/5 V

Small Outline

SOP14,.25

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

10 pA

12 µs

Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-G14

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

0.341 in (8.65 mm)

LM2901W

Texas Instruments

Comparator

Automotive

Flat

14

DFP

Rectangular

Ceramic

15 mV

Yes

BIPOLAR

2.5 mA

5 V

5 V

Flatpack

FL14,.3

Comparators

0.05 in (1.27 mm)

125 °C (257 °F)

250 nA

1.3 µs

-40 °C (-40 °F)

Dual

R-XDFP-F14

No

TLV1704AQPWRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

5.5 mV

20 nA

Yes

4

BIPOLAR

AEC-Q100

300 μA

Small Outline, Thin Profile, Shrink Pitch

Comparators

40 V

0.026 in (0.65 mm)

125 °C (257 °F)

15 nA

560 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

TLV4021S5YKAR

Texas Instruments

Comparator

Automotive

Ball

4

VFBGA

Square

Yes

1

5 μA

Tape And Reel

1.8 V

Grid Array, Very Thin Profile, Fine Pitch

BGA4,2X2,14

Comparators

6 V

0.014 in (0.35 mm)

125 °C (257 °F)

2 µs

Open-Drain

-40 °C (-40 °F)

Tin/Silver/Copper

Bottom

S-XBGA-B4

1

0.016 in (0.4 mm)

0.029 in (0.73 mm)

e1

260 °C (500 °F)

0.029 in (0.73 mm)

PTLV7044PWR

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

8 mV

2 pA

Yes

4

3 μA

Tape And Reel

1.8 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

3 µs

Open-Drain

-40 °C (-40 °F)

Dual

R-PDSO-G14

0.047 in (1.2 mm)

0.173 in (4.4 mm)

0.197 in (5 mm)

TLV3012AIDCK

Texas Instruments

Comparator

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

12 mV

10 pA

Yes

1

BIPOLAR

5 μA

5 V

2/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

13.5 µs

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

0.079 in (2 mm)

TLV3012AIDBV

Texas Instruments

Comparator

Automotive

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

12 mV

10 pA

Yes

1

CMOS

5 V

Small Outline, Low Profile, Shrink Pitch

Comparators

7 V

0.037 in (0.95 mm)

125 °C (257 °F)

12 µs

Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-G6

0.057 in (1.45 mm)

0.063 in (1.6 mm)

0.114 in (2.9 mm)

TLV3494AIPWRG4

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

15 mV

10 pA

Yes

4

CMOS

1.2 μA

5 V

2/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

12 µs

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

TLV7012DSGR

Texas Instruments

Comparator

Automotive

No Lead

8

HVSON

Square

Plastic/Epoxy

8 mV

2 pA

Yes

2

18 μA

Tape And Reel

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC8,.08,20

Comparators

7 V

0.02 in (0.5 mm)

125 °C (257 °F)

2 pA

260 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

S-PDSO-N8

1

0.031 in (0.8 mm)

0.079 in (2 mm)

e4

30 s

260 °C (500 °F)

0.079 in (2 mm)

TLV3702IPE4

Texas Instruments

Comparator

Automotive

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

0 V

7 mV

1.5 nA

No

2

CMOS

2 μA

0 V

5 V

±1.35/±8/2.7/16 V

In-Line

DIP8,.3

Comparators

17 V

0.1 in (2.54 mm)

125 °C (257 °F)

250 pA

240 µs

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDIP-T8

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

e4

0.386 in (9.81 mm)

LM2901J

Texas Instruments

Comparator

Automotive

Through-Hole

14

DIP

Rectangular

Ceramic

15 mV

No

BIPOLAR

2.5 mA

5 V

5 V

In-Line

DIP14,.3

Comparators

0.1 in (2.54 mm)

125 °C (257 °F)

250 nA

1.3 µs

-40 °C (-40 °F)

Dual

R-XDIP-T14

No

LMV339QPWR

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

4

BIPOLAR

200 μA

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

450 ns

Open-Collector

-40 °C (-40 °F)

Dual

R-PDSO-G14

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

0.197 in (5 mm)

LMC6772QMM/NOPB

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

10 mV

0.4 pA

Yes

2

CMOS

AEC-Q100

20 μA

Tape And Reel

2.7 V

2.7/15 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

16 V

0.026 in (0.65 mm)

125 °C (257 °F)

0.4 pA

5 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LM2901QPWRG4Q1

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

15 mV

-500 nA

Yes

4

BIPOLAR

AEC-Q100

2.5 mA

Tape And Reel

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

-250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

260 °C (500 °F)

0.197 in (5 mm)

LM2901QPWRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

15 mV

-500 nA

Yes

4

BIPOLAR

AEC-Q100

2.5 mA

Tape And Reel

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

-250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

260 °C (500 °F)

0.197 in (5 mm)

LMP7300MM/NOPB

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

750 uV

3 nA

Yes

1

16 μA

Tape And Reel

2.7/12 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

0.026 in (0.65 mm)

125 °C (257 °F)

3 nA

7.7 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.042 in (1.07 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

TLV3704IDRG4

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

7 mV

1.5 nA

Yes

4

CMOS

3.2 μA

0 V

Tape And Reel

5 V

±1.35/±8/2.7/16 V

Small Outline

SOP14,.25

Comparators

17 V

0.05 in (1.27 mm)

125 °C (257 °F)

100 pA

240 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.341 in (8.65 mm)

LM2903PW

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

0 V

15 mV

-500 nA

Yes

2

BIPOLAR

2.5 mA

0 V

5 V

5/30 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.173 in (4.4 mm)

TLV3402QDGKR

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

1

0 V

2.7 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

17 V

0.026 in (0.65 mm)

125 °C (257 °F)

Open-Drain

-40 °C (-40 °F)

Dual

S-PDSO-G8

0.043 in (1.1 mm)

0.118 in (3 mm)

No

0.118 in (3 mm)

INA300AIDSQ

Texas Instruments

Comparator

Automotive

No Lead

10

HVSON

Square

Plastic/Epoxy

10 uA

Yes

1

3.3 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

6 V

0.016 in (0.4 mm)

125 °C (257 °F)

100 µs

Open-Drain

-40 °C (-40 °F)

Dual

S-PDSO-N10

0.031 in (0.8 mm)

0.079 in (2 mm)

0.079 in (2 mm)

LMV762QMAX

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1 mV

50 pA

Yes

2

AEC-Q100

5 V

Small Outline

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

225 ns

Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-G8

0.069 in (1.75 mm)

0.154 in (3.9 mm)

0.193 in (4.9 mm)

TLV4082DRYR

Texas Instruments

Comparator

Automotive

No Lead

6

HVSON

Rectangular

Plastic/Epoxy

6 mV

15 nA

Yes

2

12 μA

Tape And Reel

3.3 V

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC6,.03,20

Comparators

7 V

0.02 in (0.5 mm)

125 °C (257 °F)

15 nA

5.5 µs

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold Silver

Dual

R-PDSO-G6

1

0.026 in (0.65 mm)

0.039 in (1 mm)

e4

30 s

260 °C (500 °F)

0.057 in (1.45 mm)

TLV3704ID

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

7 mV

1.5 nA

Yes

4

CMOS

3.2 μA

0 V

Tube

5 V

±1.35/±8/2.7/16 V

Small Outline

SOP14,.25

Comparators

17 V

0.05 in (1.27 mm)

125 °C (257 °F)

100 pA

240 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.341 in (8.65 mm)

PTLV9032QDRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1.5 mV

5 pA

Yes

2

AEC-Q100

60 μA

Tape And Reel

5 V

Small Outline

SOP8,.25

6 V

0.05 in (1.27 mm)

125 °C (257 °F)

100 ns

Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-G8

0.069 in (1.75 mm)

0.153 in (3.895 mm)

0.193 in (4.905 mm)

PLM2903BWDSGRQ1

Texas Instruments

Comparator

Automotive

No Lead

8

Square

Plastic/Epoxy

2.5 mV

25 nA

Yes

2

AEC-Q100

800 μA

Tape And Reel

5 V

Comparators

36 V

125 °C (257 °F)

25 nA

1 µs

Open-Collector

-40 °C (-40 °F)

Dual

S-PDSO-N8

TLV9034PWR

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

2 mV

Yes

4

140 μA

Tape And Reel, 13 Inch

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

115 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

TLV3494AIPWR

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

15 mV

10 pA

Yes

4

CMOS

4.8 μA

Tape And Reel

5 V

2/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

12 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

260 °C (500 °F)

0.197 in (5 mm)

TLC393QD

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

10 mV

30 nA

Yes

2

CMOS

90 μA

5 V

5 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

30 nA

2.5 µs

Open-Drain

-40 °C (-40 °F)

Dual

R-PDSO-G8

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

0.193 in (4.9 mm)

LM2901VQDRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

15 mV

-500 nA

Yes

4

BIPOLAR

AEC-Q100

2.5 mA

Tape And Reel

5 V

5 V

Small Outline

SOP14,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

-250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.341 in (8.65 mm)

TLV7021DCKT

Texas Instruments

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

8 mV

5 pA

Yes

1

10 μA

1.8 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 pA

310 ns

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

2

0.043 in (1.1 mm)

0.049 in (1.25 mm)

e4

260 °C (500 °F)

0.079 in (2 mm)

TLV3401QDBVT

Texas Instruments

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

1

0 V

2.7 V

Small Outline, Low Profile, Shrink Pitch

Comparators

17 V

0.037 in (0.95 mm)

125 °C (257 °F)

Open-Drain

-40 °C (-40 °F)

Dual

R-PDSO-G5

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

0.114 in (2.9 mm)

TLV9024RTER

Texas Instruments

Comparator

Automotive

No Lead

16

HVQCCN

Square

Plastic/Epoxy

2 mV

Yes

4

140 μA

Tape And Reel, 13 Inch

5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.12SQ,20

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

150 ns

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Quad

S-PQCC-N16

1

0.031 in (0.8 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

TLV3401IDRG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

1

950 nA

0 V

5 V

±1.35/±8/2.7/16 V

Small Outline

SOP8,.25

Comparators

17 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 pA

175 µs

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LMV762QMA

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1 mV

50 pA

Yes

2

AEC-Q100

5 V

Small Outline

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

225 ns

Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-G8

0.069 in (1.75 mm)

0.154 in (3.9 mm)

0.193 in (4.9 mm)

LMV7231SQX/NOPB

Texas Instruments

Comparator

Automotive

No Lead

24

HVQCCN

Square

6 mV

15 nA

Yes

6

60 μA

Tape And Reel

3.3 V

3.3 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC24,.16SQ,20

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

5 nA

5.6 µs

Open-Drain

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N24

1

0.031 in (0.8 mm)

0.157 in (4 mm)

No

e3

30 s

260 °C (500 °F)

0.157 in (4 mm)

SM72375MME

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

13 mV

Yes

1

CMOS

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

16 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 µs

Open-Drain

-40 °C (-40 °F)

Dual

S-PDSO-G8

0.043 in (1.09 mm)

0.118 in (3 mm)

0.118 in (3 mm)

TLC393QDREP

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

10 mV

30 nA

Yes

2

CMOS

5 V

Small Outline

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

2.5 µs

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

0.193 in (4.9 mm)

SM72375MM/NOPB

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

13 mV

Yes

2

CMOS

25 μA

2.7 V

2.7/15 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

16 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 µs

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.