Automotive Comparators 1,339

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Minimum Isolation Voltage Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Sub-Category Nominal Slow Rate Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Nominal Response Time Output Type Minimum Operating Temperature Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

LMH7322SQX

Texas Instruments

Comparator

Automotive

No Lead

24

VQCCN

Square

Plastic/Epoxy

8 mV

2.9 uA

Yes

1

5 V

Chip Carrier, Very Thin Profile

Comparators

12 V

0.02 in (0.5 mm)

125 °C (257 °F)

0.783 ns

-40 °C (-40 °F)

Tin Lead

Quad

S-PQCC-N24

2

0.031 in (0.8 mm)

0.157 in (4 mm)

No

e0

30 s

235 °C (455 °F)

0.157 in (4 mm)

TLV3401QDBVR

Texas Instruments

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

1

0 V

2.7 V

Small Outline, Low Profile, Shrink Pitch

Comparators

17 V

0.037 in (0.95 mm)

125 °C (257 °F)

Open-Drain

-40 °C (-40 °F)

Dual

R-PDSO-G5

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

0.114 in (2.9 mm)

SM72375MMX/NOPB

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

13 mV

Yes

2

CMOS

25 μA

2.7 V

2.7/15 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

16 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 µs

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LM2901IDR

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

15 mV

-500 nA

Yes

4

BIPOLAR

2.5 mA

5 V

Small Outline

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

1.3 µs

Open-Collector

-40 °C (-40 °F)

Dual

R-PDSO-G14

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

0.341 in (8.65 mm)

LM2903DB

Texas Instruments

Comparator

Automotive

Gull Wing

8

SSOP

Rectangular

Plastic/Epoxy

15 mV

250 nA

Yes

2

1 mA

5 V

Small Outline, Shrink Pitch

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

1.3 µs

Open-Collector

-40 °C (-40 °F)

Dual

R-PDSO-G8

0.079 in (2 mm)

0.118 in (3 mm)

No

0.209 in (5.3 mm)

TLV7032DGKT

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

8 mV

Yes

1

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

3 µs

Push-Pull

-40 °C (-40 °F)

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

30 s

260 °C (500 °F)

0.118 in (3 mm)

LMV7231SQX

Texas Instruments

Comparator

Automotive

No Lead

24

HVQCCN

Square

15 nA

Yes

1

3.3 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

500 ns

Open-Drain

-40 °C (-40 °F)

Quad

S-XQCC-N24

0.031 in (0.8 mm)

0.157 in (4 mm)

No

0.157 in (4 mm)

PLM2903BIPWR

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

4 mV

25 nA

Yes

2

2.5 mA

Tape And Reel

5 V

Small Outline, Low Profile, Shrink Pitch

TSSOP8,.25

Comparators

38 V

0.026 in (0.65 mm)

125 °C (257 °F)

25 nA

1 µs

Open-Collector

-40 °C (-40 °F)

Dual

R-PDSO-G8

0.047 in (1.2 mm)

0.118 in (3 mm)

0.173 in (4.4 mm)

PLM339LVPWR

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSOP

Rectangular

Plastic/Epoxy

2 mV

5 pA

Yes

4

200 μA

Tape And Reel

Small Outline, Thin Profile

TSOP14,.25,25

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

600 ns

Open-Drain

-40 °C (-40 °F)

Dual

R-PDSO-G14

0.047 in (1.2 mm)

0.173 in (4.4 mm)

0.197 in (5 mm)

TLV3402IP

Texas Instruments

Comparator

Automotive

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

No

2

1.28 μA

0 V

Tube

5 V

±1.35/±8/2.7/16 V

In-Line

DIP8,.3

Comparators

17 V

0.1 in (2.54 mm)

125 °C (257 °F)

100 pA

175 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDIP-T8

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

e4

0.386 in (9.81 mm)

TLV3494AIDG4

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

15 mV

10 pA

Yes

4

CMOS

1.2 μA

5 V

2/5 V

Small Outline

SOP14,.25

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

10 pA

12 µs

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

LMV7239QM7

Texas Instruments

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

0 V

8 mV

600 nA

Yes

1

BIPOLAR

0 V

2.7 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-G5

0.043 in (1.1 mm)

0.049 in (1.25 mm)

0.079 in (2 mm)

TLV7022DDFR

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

8 mV

2 pA

Yes

2

18 μA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.12

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

2 pA

260 ns

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.043 in (1.1 mm)

0.063 in (1.6 mm)

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

LM2901PWG4

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

7 mV

500 nA

Yes

4

BIPOLAR

2.5 mA

Tube

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

LMV339IPWG4

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

4

BIPOLAR

350 μA

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

600 ns

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

TLV7044PWR

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

8 mV

2 pA

Yes

4

3 μA

Tape And Reel

1.8 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

2 pA

3 µs

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e4

260 °C (500 °F)

0.197 in (5 mm)

PLM2903BIDR

Texas Instruments

Comparator

Automotive

Gull Wing

8

HSOP

Rectangular

Plastic/Epoxy

4 mV

50 nA

Yes

2

5 V

Small Outline, Heat Sink/Slug

Comparators

38 V

0.05 in (1.27 mm)

125 °C (257 °F)

1 µs

Open-Collector

-40 °C (-40 °F)

Dual

R-PDSO-G8

0.069 in (1.75 mm)

0.153 in (3.895 mm)

0.193 in (4.905 mm)

LM2901VQDRG4Q1

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

15 mV

-500 nA

Yes

4

BIPOLAR

AEC-Q100

2.5 mA

Tape And Reel

5 V

5 V

Small Outline

SOP14,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

-250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.341 in (8.65 mm)

LM239AQDRG4Q1

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

2.5 mV

400 nA

Yes

4

BIPOLAR

AEC-Q100

2 mA

0 V

Tape And Reel

5 V

5 V

Small Outline

SOP14,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

50 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

LM239AQDRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

2.5 mV

-400 nA

Yes

4

BIPOLAR

AEC-Q100

2 mA

0 V

Tape And Reel

5 V

5 V

Small Outline

SOP14,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

50 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

LM2901DBLE

Texas Instruments

Comparator

Automotive

Gull Wing

14

SSOP

Rectangular

Plastic/Epoxy

15 mV

-500 nA

Yes

4

BIPOLAR

2.5 mA

5 V

5 V

Small Outline, Shrink Pitch

SSOP14,.3

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Dual

R-PDSO-G14

0.079 in (2 mm)

0.209 in (5.3 mm)

No

0.244 in (6.2 mm)

V62/03638-01XE

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

3 mV

150 nA

Yes

1

BIPOLAR

6 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

100 nA

115 ns

Open-Collector, Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TLV3494AIPWTG4

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

15 mV

10 pA

Yes

4

CMOS

1.2 μA

5 V

2/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

12 µs

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

TLV3401QDBV

Texas Instruments

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

1

0 V

2.7 V

Small Outline, Low Profile, Shrink Pitch

Comparators

17 V

0.037 in (0.95 mm)

125 °C (257 °F)

Open-Drain

-40 °C (-40 °F)

Dual

R-PDSO-G5

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

0.114 in (2.9 mm)

LM339LVPWR

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

3 mV

Yes

4

200 μA

Tape And Reel, 13 Inch

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

600 ns

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

TLV3401QD

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

1

0 V

2.7 V

Small Outline

Comparators

17 V

0.05 in (1.27 mm)

125 °C (257 °F)

Open-Drain

-40 °C (-40 °F)

Dual

R-PDSO-G8

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

0.193 in (4.9 mm)

TLC393QDRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

5 mV

30 pA

Yes

2

CMOS

AEC-Q100

40 μA

Tape And Reel

5 V

5 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

30 pA

2.5 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TLC372QD

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

10 mV

20 nA

Yes

2

CMOS

300 μA

Tube

5 V

5 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

30 pA

650 ns

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LMV331QDBVR

Texas Instruments

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

1

BIPOLAR

100 μA

5 V

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

5.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

250 nA

450 ns

Open-Collector

-40 °C (-40 °F)

Dual

R-PDSO-G5

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

0.114 in (2.9 mm)

INA301A2QDGKRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

50 uV

Yes

1

100 dB

AEC-Q100

700 μA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

4 V/us

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

36 V

750 ns

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold Silver

Dual

S-PDSO-G8

2

0.043 in (1.1 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

TLV7021DBVR

Texas Instruments

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

8 mV

5 pA

Yes

1

10 μA

1.8 V

Small Outline, Low Profile, Shrink Pitch

Comparators

6 V

0.037 in (0.95 mm)

125 °C (257 °F)

5 pA

310 ns

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

e4

260 °C (500 °F)

0.114 in (2.9 mm)

LM2903VQDR

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

15 mV

-500 nA

Yes

2

BIPOLAR

1 mA

Tape And Reel

5 V

5 V

Small Outline

SOP8,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

50 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

TLV3701QDRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

7 mV

2 nA

Yes

1

AEC-Q100

5 V

±1.35/±8/2.7/16 V

Small Outline

SOP8,.25

Comparators

17 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 pA

240 µs

Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-G8

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

0.193 in (4.9 mm)

LMV7231SQE

Texas Instruments

Comparator

Automotive

No Lead

24

HVQCCN

Square

15 nA

Yes

1

3.3 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

500 ns

Open-Drain

-40 °C (-40 °F)

Quad

S-XQCC-N24

0.031 in (0.8 mm)

0.157 in (4 mm)

No

0.157 in (4 mm)

TLV7034PWR

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

8 mV

2 pA

Yes

4

3 μA

Tape And Reel

1.8 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

2 pA

3 µs

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e4

260 °C (500 °F)

0.197 in (5 mm)

LMV339QDRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

2

BIPOLAR

AEC-Q100

350 μA

5 V

3/5 V

Small Outline

SOP14,.25

Comparators

6 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 nA

450 ns

Open-Collector

-40 °C (-40 °F)

Dual

R-PDSO-G14

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

0.341 in (8.65 mm)

PLM2903BIDDFR

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

2 mV

25 nA

Yes

2

BIPOLAR

800 μA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.1

38 V

0.026 in (0.65 mm)

125 °C (257 °F)

25 nA

1 µs

Open-Collector

-40 °C (-40 °F)

Dual

R-PDSO-G8

0.043 in (1.1 mm)

0.063 in (1.6 mm)

0.114 in (2.9 mm)

TLV3404QDR

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

1

0 V

2.7 V

Small Outline

Comparators

17 V

0.05 in (1.27 mm)

125 °C (257 °F)

Open-Drain

-40 °C (-40 °F)

Dual

R-PDSO-G14

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

0.341 in (8.65 mm)

TLV4011QDCKRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

9 mV

25 nA

Yes

1

AEC-Q100

4 μA

1.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

25 nA

5 µs

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold Silver

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

e4

30 s

260 °C (500 °F)

0.079 in (2 mm)

TLV3702QDRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

7 mV

2 nA

Yes

2

AEC-Q100

1.6 μA

Tape And Reel

5 V

±1.35/±8/2.7/16 V

Small Outline

SOP8,.25

Comparators

17 V

0.05 in (1.27 mm)

125 °C (257 °F)

100 pA

240 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

TLV7022DSGR

Texas Instruments

Comparator

Automotive

No Lead

8

HVSON

Square

Plastic/Epoxy

8 mV

2 pA

Yes

2

18 μA

Tape And Reel

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC8,.08,20

Comparators

7 V

0.02 in (0.5 mm)

125 °C (257 °F)

2 pA

260 ns

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

S-PDSO-N8

1

0.031 in (0.8 mm)

0.079 in (2 mm)

e4

30 s

260 °C (500 °F)

0.079 in (2 mm)

PLV1805QDBVRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

6.5 mV

500 pA

Yes

1

AEC-Q100

12 V

Small Outline, Low Profile, Shrink Pitch

Comparators

42 V

0.037 in (0.95 mm)

125 °C (257 °F)

1 µs

Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-G6

0.057 in (1.45 mm)

0.063 in (1.6 mm)

0.114 in (2.9 mm)

TLV4082QDBVRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

6 mV

15 nA

Yes

2

AEC-Q100

12 μA

Tape And Reel

3.3 V

Small Outline, Low Profile, Shrink Pitch

SOP6,.11,38

Comparators

7 V

0.037 in (0.95 mm)

125 °C (257 °F)

15 nA

5.5 µs

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

2

0.057 in (1.45 mm)

0.063 in (1.6 mm)

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

LMH7324SQ

Texas Instruments

Comparator

Automotive

No Lead

32

HVQCCN

Square

9.5 mV

Yes

1

5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

Comparators

13.2 V

0.02 in (0.5 mm)

125 °C (257 °F)

0.74 ns

Open-Emitter

-40 °C (-40 °F)

Tin Lead

Quad

S-XQCC-N32

1

0.031 in (0.8 mm)

0.197 in (5 mm)

No

e0

40

260 °C (500 °F)

0.197 in (5 mm)

PLV7031QDCKRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

8 mV

2 pA

Yes

1

AEC-Q100

900 nA

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

3 ns

Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-G5

0.043 in (1.1 mm)

0.049 in (1.25 mm)

0.079 in (2 mm)

LM2903JG

Texas Instruments

Comparator

Automotive

Through-Hole

8

DIP

Rectangular

Ceramic, Glass-Sealed

15 mV

500 nA

No

2

BIPOLAR

2.5 mA

5 V

5 V

In-Line

DIP8,.3

Comparators

0.1 in (2.54 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Dual

R-GDIP-T8

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

0.378 in (9.6 mm)

TLV3501DBV

Texas Instruments

Comparator

Automotive

Gull Wing

6

SOP

Rectangular

Plastic/Epoxy

6.5 mV

10 pA

Yes

1

5 mA

5 V

3/5 V

Small Outline

TSOP6,.11,37

Comparators

5.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

10 pA

7.5 ns

Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-G6

No

TLV3404IDRG4

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

4

3.8 μA

0 V

5 V

±1.35/±8/2.7/16 V

Small Outline

SOP14,.25

Comparators

17 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 pA

175 µs

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.