Automotive Comparators 1,339

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Minimum Isolation Voltage Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Sub-Category Nominal Slow Rate Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Nominal Response Time Output Type Minimum Operating Temperature Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

LMV393QDRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

2

BIPOLAR

AEC-Q100

300 μA

Tape And Reel

5 V

3/5 V

Small Outline

SOP8,.25

Comparators

6 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 nA

450 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

LMV762MM

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1 mV

50 pA

Yes

2

1.4 mA

5 V

2.7/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

50 pA

225 ns

Push-Pull

-40 °C (-40 °F)

Tin Lead

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

260 °C (500 °F)

0.118 in (3 mm)

MCP6546T-E/OTVAO

Microchip Technology

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

7 mV

5 nA

Yes

1

CMOS

AEC-Q100

1 μA

Tape And Reel

5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

7 V

0.037 in (0.95 mm)

125 °C (257 °F)

3 µs

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

0.057 in (1.45 mm)

0.059 in (1.5 mm)

e3

0.114 in (2.9 mm)

TLV7021DCKR

Texas Instruments

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

8 mV

5 pA

Yes

1

10 μA

1.8 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 pA

310 ns

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

2

0.043 in (1.1 mm)

0.049 in (1.25 mm)

e4

260 °C (500 °F)

0.079 in (2 mm)

TS332IQ2T

STMicroelectronics

Comparator

Automotive

No Lead

8

HVSON

Square

Plastic/Epoxy

6 mV

100 nA

Yes

2

Tape And Reel

1.8 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

5.5 V

0.02 in (0.5 mm)

125 °C (257 °F)

420 ns

Open-Drain

-40 °C (-40 °F)

Dual

S-PDSO-N8

0.024 in (0.6 mm)

0.079 in (2 mm)

0.079 in (2 mm)

ADCMP604BKSZ-R2

Analog Devices

Comparator

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

21 mA

2.5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

3 ns

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

LMV762QMAX/NOPB

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1 mV

5 pA

Yes

2

AEC-Q100

1.4 mA

Tape And Reel

2.7/5 V

Small Outline

SOP8,.25

Comparators

0.05 in (1.27 mm)

125 °C (257 °F)

5 pA

120 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.91 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LT6700HS6-1#TR

Analog Devices

Comparator

Automotive

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

50 nA

Yes

2

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Tin/Lead

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e0

0.114 in (2.9 mm)

NCV2901DTBR2G

Onsemi

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

15 mV

500 nA

Yes

4

BIPOLAR

AEC-Q100

2.5 mA

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

TLV3492AIDG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

15 mV

10 pA

Yes

2

CMOS

1.2 μA

5 V

2/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

10 pA

12 µs

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TLV3702IDGKG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

7 mV

1.5 nA

Yes

2

CMOS

1.6 μA

0 V

Tube

5 V

±1.35/±8/2.7/16 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

17 V

0.026 in (0.65 mm)

125 °C (257 °F)

100 pA

240 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

TLV3702IDR

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

7 mV

1.5 nA

Yes

2

CMOS

1.6 μA

0 V

Tape And Reel

5 V

±1.35/±8/2.7/16 V

Small Outline

SOP8,.25

Comparators

17 V

0.05 in (1.27 mm)

125 °C (257 °F)

100 pA

240 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

ADCMP606BKSZ-R2

Analog Devices

Comparator

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

BIPOLAR

26 mA

2.5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

2.1 ns

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

ADCMP606BKSZ-REEL7

Analog Devices

Comparator

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

BIPOLAR

26 mA

Tape And Reel, 7 Inch

2.5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

2.1 ns

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

ADCMP606BKSZ-RL

Analog Devices

Comparator

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

BIPOLAR

26 mA

Tape And Reel

2.5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

2.1 ns

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

ADCMP607BCPZ-R2

Analog Devices

Comparator

Automotive

No Lead

12

HVQCCN

Square

5 mV

5 uA

Yes

1

BIPOLAR

1.5 mA

Tape And Reel

2.5 V

3/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC12,.12SQ,20

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

5 uA

2.1 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N12

3

0.039 in (1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

INA209AIPWR

Texas Instruments

Comparator

Automotive

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

5.5 kHz

100 uV

Yes

1

120 dB

1.5 mA

Tape And Reel

3.3 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

26 V

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G16

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

LMV761MA/NOPB

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1 mV

50 pA

Yes

1

AEC-Q100

700 μA

Tube

2.7 V

2.7/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

5 pA

120 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

MCP6541-E/SN

Microchip Technology

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

7 mV

5 nA

Yes

1

CMOS

1 μA

Tube

5 V

1.6/5.5 V

Small Outline

SOP8,.25

Comparators

7 V

0.05 in (1.27 mm)

125 °C (257 °F)

4 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

MCP6542T-E/SN

Microchip Technology

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

7 mV

5 nA

Yes

2

CMOS

1 μA

Tape And Reel

5 V

1.6/5.5 V

Small Outline

SOP8,.25

Comparators

7 V

0.05 in (1.27 mm)

125 °C (257 °F)

4 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

MCP6542T-E/SNVAO

Microchip Technology

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

7 mV

5 nA

Yes

2

CMOS

AEC-Q100; TS 16949

2 μA

Tape And Reel

5 V

Small Outline

SOP8,.25

Comparators

7 V

0.05 in (1.27 mm)

125 °C (257 °F)

4 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

0.069 in (1.75 mm)

0.154 in (3.9 mm)

e3

0.193 in (4.9 mm)

PLM393LVDR

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

2.5 mV

50 pA

Yes

2

70 mA

Tape And Reel

5 V

Small Outline

SOP8,.25

6 V

0.05 in (1.27 mm)

125 °C (257 °F)

600 ns

Open-Drain

-40 °C (-40 °F)

Dual

R-PDSO-G8

0.069 in (1.75 mm)

0.153 in (3.895 mm)

0.193 in (4.905 mm)

TLV3491AIDRG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

15 mV

10 pA

Yes

1

CMOS

1.2 μA

5 V

2/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

10 pA

12 µs

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TLV3702ID

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

7 mV

1.5 nA

Yes

2

CMOS

1.6 μA

0 V

Tube

5 V

±1.35/±8/2.7/16 V

Small Outline

SOP8,.25

Comparators

17 V

0.05 in (1.27 mm)

125 °C (257 °F)

100 pA

240 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

TLV6703DSER

Texas Instruments

Comparator

Automotive

No Lead

6

VSON

Rectangular

Plastic/Epoxy

2 mV

25 nA

Yes

1

13 μA

5 V

Small Outline, Very Think Profile

Comparators

20 V

0.02 in (0.5 mm)

125 °C (257 °F)

25 nA

29 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-N6

1

0.031 in (0.8 mm)

0.059 in (1.5 mm)

e4

30 s

260 °C (500 °F)

0.059 in (1.5 mm)

TS3022IDT

STMicroelectronics

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

10 mV

300 nA

Yes

2

135 μA

Tape And Reel

2 V

1.8/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

160 nA

42 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TS393IDT

STMicroelectronics

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

6.5 mV

600 pA

Yes

2

CMOS

50 μA

0 V

Tape And Reel

3 V

5 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

1.5 µs

Open-Drain

-40 °C (-40 °F)

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

260 °C (500 °F)

0.193 in (4.9 mm)

TS882IST

STMicroelectronics

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

6 mV

99 pA

Yes

2

1 μA

Tape And Reel

1.2 V

1.2/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

5.5 µs

Push-Pull

-40 °C (-40 °F)

Dual

S-PDSO-G8

0.043 in (1.1 mm)

0.118 in (3 mm)

No

0.118 in (3 mm)

ADCMP341YRJZ-REEL7

Analog Devices

Comparator

Automotive

Gull Wing

8

LSSOP

Rectangular

Plastic/Epoxy

5 nA

Yes

2

10 μA

Tape And Reel, 7 Inch

3.3 V

1.7/5 V

Small Outline, Low Profile, Shrink Pitch

TSSOP8,.1

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 nA

8 µs

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

ADCMP604BKSZ-REEL7

Analog Devices

Comparator

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

21 mA

Tape And Reel, 7 Inch

2.5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

3 ns

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

ADCMP608BKSZ-RL

Analog Devices

Comparator

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

5 mV

400 nA

Yes

1

CMOS

1.3 mA

Tape And Reel

2.5 V

2.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

400 nA

60 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

LM2901VDG

Onsemi

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

15 mV

500 nA

Yes

4

BIPOLAR

2.5 mA

5 V

5 V

Small Outline

SOP14,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Tin

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

260 °C (500 °F)

0.341 in (8.65 mm)

LMH7322SQX/NOPB

Texas Instruments

Comparator

Automotive

No Lead

24

HVQCCN

Square

8 mV

Yes

2

5 V

2.7/5/12 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC24,.16SQ,20

Comparators

13.2 V

0.02 in (0.5 mm)

125 °C (257 °F)

0.783 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N24

3

0.031 in (0.8 mm)

0.157 in (4 mm)

No

e3

30 s

260 °C (500 °F)

0.157 in (4 mm)

LMV393S-13

Diodes Incorporated

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

2

BICMOS

5 V

Small Outline

Comparators

5.5 V

125 °C (257 °F)

300 ns

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

e3

260 °C (500 °F)

MCP6548-E/P

Microchip Technology

Comparator

Automotive

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

7 mV

5 nA

No

1

CMOS

TS 16949

1 μA

Tube

5 V

1.6/5.5 V

In-Line

DIP8,.3

Comparators

7 V

0.1 in (2.54 mm)

125 °C (257 °F)

3 µs

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

R-PDIP-T8

0.21 in (5.334 mm)

0.3 in (7.62 mm)

No

e3

0.365 in (9.271 mm)

MCP6567T-E/SN

Microchip Technology

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

10 mV

5 nA

Yes

2

CMOS

130 μA

Tape And Reel

1.8 V

2/5 V

Small Outline

SOP8,.25

Comparators

6.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

5 nA

56 ns

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

3

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

40

260 °C (500 °F)

0.193 in (4.9 mm)

PTLV7011DPWR

Texas Instruments

Comparator

Automotive

Butt

5

HVBCC

Square

Plastic/Epoxy

800 uV

5 pA

Yes

1

Chip Carrier, Heat Sink/Slug, Very Thin Profile

Comparators

5 V

125 °C (257 °F)

350 ns

-40 °C (-40 °F)

Bottom

S-PBCC-B5

0.016 in (0.4 mm)

0.031 in (0.8 mm)

0.031 in (0.8 mm)

PTLV7034PWR

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

8 mV

2 pA

Yes

4

3 μA

Tape And Reel

1.8 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

3 µs

Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-G14

0.047 in (1.2 mm)

0.173 in (4.4 mm)

0.197 in (5 mm)

TLV3401IDR

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

1

640 nA

0 V

Tape And Reel

5 V

±1.35/±8/2.7/16 V

Small Outline

SOP8,.25

Comparators

17 V

0.05 in (1.27 mm)

125 °C (257 °F)

100 pA

175 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

TLV4021R2YKAR

Texas Instruments

Comparator

Automotive

Ball

4

VFBGA

Square

Yes

1

5 μA

Tape And Reel

1.8 V

Grid Array, Very Thin Profile, Fine Pitch

BGA4,2X2,14

Comparators

6 V

0.014 in (0.35 mm)

125 °C (257 °F)

360 ns

Open-Drain

-40 °C (-40 °F)

Tin/Silver/Copper

Bottom

S-XBGA-B4

1

0.016 in (0.4 mm)

0.029 in (0.73 mm)

e1

260 °C (500 °F)

0.029 in (0.73 mm)

TLV6703DDCT

Texas Instruments

Comparator

Automotive

Gull Wing

6

TSOP

Rectangular

Plastic/Epoxy

3 mV

25 nA

Yes

1

13 μA

5 V

Small Outline, Thin Profile

Comparators

20 V

0.037 in (0.95 mm)

125 °C (257 °F)

25 nA

29 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G6

2

0.043 in (1.1 mm)

0.063 in (1.6 mm)

e4

260 °C (500 °F)

0.114 in (2.9 mm)

TLV7031DPWR

Texas Instruments

Comparator

Automotive

Bu

5

VBCC

Square

Plastic/Epoxy

8 mV

2 pA

Yes

1

900 nA

1.8 V

Chip Carrier, Very Thin Profile

Comparators

7 V

0.019 in (0.48 mm)

125 °C (257 °F)

2 pA

4.5 ns

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Bottom

S-PBCC-B5

1

0.016 in (0.4 mm)

0.031 in (0.8 mm)

e4

0.031 in (0.8 mm)

TLV7042DSGR

Texas Instruments

Comparator

Automotive

8 mV

2 pA

2

1.5 μA

125 °C (257 °F)

2 pA

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

1

e4

30 s

260 °C (500 °F)

TS332IST

STMicroelectronics

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

6 mV

100 nA

Yes

2

38 μA

Tape And Reel

1.8 V

1.8/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

420 ns

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

TS3702IPT

STMicroelectronics

Comparator

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

6.5 mV

600 pA

Yes

2

CMOS

25 μA

Tape And Reel

3 V

±1.35/±8/2.7/16 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

18 V

0.026 in (0.65 mm)

125 °C (257 °F)

15 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.173 in (4.4 mm)

ADCMP391ARZ

Analog Devices

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

5 mV

80 nA

Yes

1

5 V

Small Outline

Comparators

6 V

0.05 in (1.27 mm)

125 °C (257 °F)

4.9 µs

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

ADCMP601BKSZ-RL

Analog Devices

Comparator

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

BIPOLAR

Tape And Reel

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

5 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

ADCMP604BKSZ-RL

Analog Devices

Comparator

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

21 mA

Tape And Reel

2.5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

3 ns

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.