Automotive Comparators 1,339

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Minimum Isolation Voltage Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Sub-Category Nominal Slow Rate Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Nominal Response Time Output Type Minimum Operating Temperature Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

LT6703HVHS5-2#TRPBF

Analog Devices

Comparator

Automotive

Gull Wing

5

VSSOP

Rectangular

Plastic/Epoxy

10 nA

Yes

1

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

MCP6547T-E/MSVAO

Microchip Technology

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

7 mV

5 nA

Yes

2

CMOS

AEC-Q100

2 μA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

3 µs

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

0.043 in (1.1 mm)

0.118 in (3 mm)

e3

0.118 in (3 mm)

TLC372QDRG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

10 mV

20 nA

Yes

2

CMOS

300 μA

Tape And Reel

5 V

5 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

30 pA

650 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

TLV3402IDGKG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

2

1.28 μA

0 V

Tube

5 V

±1.35/±8/2.7/16 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

17 V

0.026 in (0.65 mm)

125 °C (257 °F)

100 pA

175 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

TS3704IDT

STMicroelectronics

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

6.5 mV

600 pA

Yes

4

CMOS

100 μA

Tape And Reel

3 V

5 V

Small Outline

SOP14,.25

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

1.2 µs

Push-Pull

-40 °C (-40 °F)

Tin

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

LM2903AVQPWR

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

4 mV

-500 nA

Yes

2

BIPOLAR

1 mA

Tape And Reel

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

50 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.173 in (4.4 mm)

LT6703HDC-3#PBF

Analog Devices

Comparator

Automotive

No Lead

3

HVSON

Square

Plastic/Epoxy

10 nA

Yes

1

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

18.5 V

0.02 in (0.5 mm)

125 °C (257 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin - annealed

Dual

S-PDSO-N3

1

0.031 in (0.8 mm)

0.079 in (2 mm)

No

e3

30 s

260 °C (500 °F)

0.079 in (2 mm)

LM2901NS

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

15 mV

-500 nA

Yes

4

BIPOLAR

0 V

5 V

Small Outline

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

30 s

260 °C (500 °F)

0.402 in (10.2 mm)

LMH7322SQE/NOPB

Texas Instruments

Comparator

Automotive

No Lead

24

HVQCCN

Square

8 mV

5 uA

Yes

2

30 mA

Tape And Reel

5 V

2.7/5/12 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC24,.16SQ,20

Comparators

13.2 V

0.02 in (0.5 mm)

125 °C (257 °F)

5 uA

0.783 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N24

3

0.031 in (0.8 mm)

0.157 in (4 mm)

No

e3

30 s

260 °C (500 °F)

0.157 in (4 mm)

LT6700HS6-2#PBF

Analog Devices

Comparator

Automotive

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

50 nA

Yes

2

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin - annealed

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

TLV9032DR

Texas Instruments

Comparator

Automotive

Gull Wing

8

HSOP

Rectangular

Plastic/Epoxy

2 mV

Yes

2

70 μA

Tape And Reel, 13 Inch

5 V

Small Outline, Heat Sink/Slug

SOP8,.25

Comparators

6 V

0.05 in (1.27 mm)

125 °C (257 °F)

115 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.153 in (3.895 mm)

e4

30 s

260 °C (500 °F)

0.193 in (4.905 mm)

LM2903AVQDR

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

4 mV

-500 nA

Yes

2

BIPOLAR

1 mA

Tape And Reel

5 V

5 V

Small Outline

SOP8,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

50 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

LMH7322SQ/NOPB

Texas Instruments

Comparator

Automotive

No Lead

24

VQCCN

Square

Plastic/Epoxy

8 mV

2.9 uA

Yes

2

30 mA

Tape And Reel

5 V

2.7/5/12 V

Chip Carrier, Very Thin Profile

LCC24,.16SQ,20

Comparators

12 V

0.02 in (0.5 mm)

125 °C (257 °F)

5 uA

0.783 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-PQCC-N24

3

0.031 in (0.8 mm)

0.157 in (4 mm)

No

e3

30 s

260 °C (500 °F)

0.157 in (4 mm)

LMV339IPWRE4

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

4

BIPOLAR

400 μA

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

600 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

260 °C (500 °F)

0.197 in (5 mm)

MCP6541RT-E/OT

Microchip Technology

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

7 mV

5 nA

Yes

1

CMOS

1 μA

Tape And Reel

5 V

1.6/5.5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

7 V

0.037 in (0.95 mm)

125 °C (257 °F)

4 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin - annealed

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.061 in (1.55 mm)

No

e3

40

260 °C (500 °F)

0.114 in (2.9 mm)

NCV2250SQ2T2G

Onsemi

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

6 mV

1 nA

Yes

1

AEC-Q100

250 μA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

90 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

e3

30 s

260 °C (500 °F)

0.079 in (2 mm)

PTLV9034QPWRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

1.5 mV

5 pA

Yes

4

AEC-Q100

140 μA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

150 ns

Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-G14

0.047 in (1.2 mm)

0.173 in (4.4 mm)

0.197 in (5 mm)

TLV3701ID

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

7 mV

1.5 nA

Yes

1

CMOS

800 nA

0 V

Tube

5 V

±1.35/±8/2.7/16 V

Small Outline

SOP8,.25

Comparators

17 V

0.05 in (1.27 mm)

125 °C (257 °F)

100 pA

240 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

NCV2252SN2T1G

Onsemi

Comparator

Automotive

Gull Wing

5

TSOP

Rectangular

Plastic/Epoxy

6 mV

1 nA

Yes

1

AEC-Q100

250 μA

Tape And Reel

5 V

Small Outline, Thin Profile

TSOP5/6,.11,37

Comparators

6 V

0.037 in (0.95 mm)

125 °C (257 °F)

90 ns

Open-Drain

-40 °C (-40 °F)

Matte Tin - annealed

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.059 in (1.5 mm)

e3

0.118 in (3 mm)

TLV7041DCKT

Texas Instruments

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

8 mV

2 pA

Yes

1

900 nA

1.8 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

2 pA

3 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

2

0.043 in (1.1 mm)

0.049 in (1.25 mm)

e4

30 s

260 °C (500 °F)

0.079 in (2 mm)

PTLV9024QPWRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

1.5 mV

5 pA

Yes

4

AEC-Q100

140 μA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

150 ns

Open-Drain

-40 °C (-40 °F)

Dual

R-PDSO-G14

0.047 in (1.2 mm)

0.173 in (4.4 mm)

0.197 in (5 mm)

TS3011ILT

STMicroelectronics

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

9 mV

100 pA

Yes

1

1.1 mA

Tape And Reel

5 V

2.2/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

5.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

20 pA

16 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

MCP6566T-E/LTVAO

Microchip Technology

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

10 mV

5 nA

Yes

1

CMOS

TS 16949

130 μA

Tape And Reel

1.8 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

80 ns

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

0.043 in (1.1 mm)

0.049 in (1.25 mm)

e3

0.079 in (2 mm)

TLV7032DSGR

Texas Instruments

Comparator

Automotive

No Lead

8

Square

Plastic

8 mV

2 pA

2

1.5 μA

Small Outline, Very Think Profile

0.02 in (0.5 mm)

125 °C (257 °F)

2 pA

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

S-PDSO-N8

1

0.031 in (0.8 mm)

0.079 in (2 mm)

e4

30 s

260 °C (500 °F)

0.079 in (2 mm)

LMV393IPWR

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

2

BIPOLAR

300 μA

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

600 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.173 in (4.4 mm)

LTC6754HUD#PBF

Analog Devices

Comparator

Automotive

No Lead

12

HVQCCN

Square

Plastic/Epoxy

7.5 mV

2.3 uA

Yes

1

CMOS

2.5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

Comparators

5.5 V

0.02 in (0.5 mm)

125 °C (257 °F)

3 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-PQCC-N12

0.031 in (0.8 mm)

0.118 in (3 mm)

e3

0.118 in (3 mm)

TLV9034QPWRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

2 mV

Yes

4

AEC-Q100

140 μA

Tape And Reel, 13 Inch

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

115 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADCMP582BCPZ-R2

Analog Devices

Comparator

Automotive

No Lead

16

HVQCCN

Square

-6 V

10 mV

30 uA

Yes

1

BIPOLAR

8 mA

-5 V

Tape And Reel

5 V

±5,3.3 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.12SQ,20

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

30 uA

0.18 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N16

3

0.035 in (0.9 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

MCP6567T-E/MSVAO

Microchip Technology

Comparator

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

10 mV

5 nA

Yes

2

CMOS

TS 16949

260 μA

Tape And Reel

1.8 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

6.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

80 ns

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

0.043 in (1.1 mm)

0.118 in (3 mm)

e3

0.118 in (3 mm)

TLV7041DPWR

Texas Instruments

Comparator

Automotive

Bu

5

VBCC

Square

Plastic/Epoxy

8 mV

2 pA

Yes

1

900 nA

1.8 V

Chip Carrier, Very Thin Profile

Comparators

7 V

0.019 in (0.48 mm)

125 °C (257 °F)

2 pA

3 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Bottom

S-PBCC-B5

1

0.016 in (0.4 mm)

0.031 in (0.8 mm)

e4

0.031 in (0.8 mm)

ADCMP361WYRJZ-RL7

Analog Devices

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

5 nA

Yes

1

3.3 V

Small Outline, Low Profile, Shrink Pitch

Comparators

6 V

0.037 in (0.95 mm)

125 °C (257 °F)

8 µs

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

LM2903AVQDRG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

4 mV

-500 nA

Yes

2

BIPOLAR

1 mA

Tape And Reel

5 V

5 V

Small Outline

SOP8,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

50 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

LT1715HMS#TRPBF

Analog Devices

Comparator

Automotive

Gull Wing

10

HTSSOP

Square

Plastic/Epoxy

-7 V

4 mV

-7 uA

Yes

2

BIPOLAR

-5 V

Tape And Reel

5 V

Small Outline

Comparators

7 V

0.02 in (0.5 mm)

125 °C (257 °F)

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

PLM2903BIDGKR

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

2 mV

25 nA

Yes

2

BIPOLAR

800 μA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

38 V

0.026 in (0.65 mm)

125 °C (257 °F)

25 nA

1 µs

Open-Collector

-40 °C (-40 °F)

Dual

S-PDSO-G8

0.043 in (1.1 mm)

0.118 in (3 mm)

0.118 in (3 mm)

TLV3011AIDBVR

Texas Instruments

Comparator

Automotive

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

15 mV

Yes

1

5 μA

Tape And Reel

5 V

2/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Comparators

7 V

0.037 in (0.95 mm)

125 °C (257 °F)

12 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G6

2

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

TLV3011AIDBVT

Texas Instruments

Comparator

Automotive

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

15 mV

Yes

1

5 μA

Tape And Reel

5 V

2/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Comparators

7 V

0.037 in (0.95 mm)

125 °C (257 °F)

12 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G6

2

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

TLV3492AID

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

15 mV

10 pA

Yes

2

CMOS

2.4 μA

Tube

5 V

2/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

10 pA

12 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

TLV3492AIDRG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

15 mV

10 pA

Yes

2

CMOS

1.2 μA

5 V

2/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

10 pA

12 µs

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TLV7011DPWR

Texas Instruments

Comparator

Automotive

Bu

5

VBCC

Square

Plastic/Epoxy

8 mV

5 pA

Yes

1

10 μA

1.8 V

Chip Carrier, Very Thin Profile

Comparators

6 V

0.019 in (0.48 mm)

125 °C (257 °F)

5 pA

310 ns

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Bottom

S-PBCC-B5

1

0.016 in (0.4 mm)

0.031 in (0.8 mm)

e4

260 °C (500 °F)

0.031 in (0.8 mm)

ADCMP600BKSZ-RL

Analog Devices

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

BIPOLAR

Tape And Reel

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

5 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e3

260 °C (500 °F)

0.079 in (2 mm)

LM2901AVQPWRG4

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

2 mV

500 nA

Yes

4

BIPOLAR

2.5 mA

Tape And Reel

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

LM2903AM8-13

Diodes Incorporated

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

15 mV

500 nA

Yes

2

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

1.3 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

0.043 in (1.1 mm)

0.118 in (3 mm)

e3

10 s

260 °C (500 °F)

0.118 in (3 mm)

PLM393BIPWR

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

0 V

4 mV

50 nA

Yes

2

800 μA

0 V

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

38 V

0.026 in (0.65 mm)

125 °C (257 °F)

25 nA

1 µs

Open-Collector

-40 °C (-40 °F)

Dual

R-PDSO-G8

0.047 in (1.2 mm)

0.118 in (3 mm)

0.173 in (4.4 mm)

TLC3704QDRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

7 mV

30 pA

Yes

4

CMOS

AEC-Q100

80 μA

Tape And Reel

5 V

5 V

Small Outline

SOP14,.25

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

30 pA

1.1 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.341 in (8.65 mm)

TLV3491AIDR

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

15 mV

10 pA

Yes

1

CMOS

1.2 μA

Tape And Reel

5 V

2/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

10 pA

12 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

TS3702IDT

STMicroelectronics

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

6.5 mV

600 pA

Yes

2

CMOS

50 μA

Tape And Reel

3 V

±1.35/±8/2.7/16 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

1.5 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD8564ARZ-REEL7

Analog Devices

Comparator

Automotive

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-7 V

10 mV

9 uA

Yes

4

15.6 mA

-5 V

Tape And Reel, 7 Inch

5 V

5,5/10,GND/-5 V

Small Outline

SOP16,.25

Comparators

7 V

0.05 in (1.27 mm)

125 °C (257 °F)

400 nA

8 ns

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.39 in (9.9 mm)

ADCMP602BRMZ

Analog Devices

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

5 mV

5 uA

Yes

1

BIPOLAR

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

5 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.