Automotive Comparators 1,339

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Minimum Isolation Voltage Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Sub-Category Nominal Slow Rate Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Nominal Response Time Output Type Minimum Operating Temperature Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

LM2903BIDR

Texas Instruments

Comparator

Automotive

Gull Wing

8

HSOP

Rectangular

Plastic/Epoxy

4 mV

50 nA

Yes

2

800 μA

Tape And Reel

5 V

Small Outline, Heat Sink/Slug

SOP8,.24

Comparators

38 V

0.05 in (1.27 mm)

125 °C (257 °F)

25 nA

1 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.153 in (3.895 mm)

e4

30 s

260 °C (500 °F)

0.193 in (4.905 mm)

LMV339IDR

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

4

BIPOLAR

400 μA

Tape And Reel

5 V

3/5 V

Small Outline

SOP14,.25

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 nA

600 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.341 in (8.65 mm)

LT1716HS5#WTRPBF

Analog Devices

Comparator

Automotive

Gull Wing

5

VSSOP

Rectangular

Plastic/Epoxy

-22 V

2.9 mV

1.4 mA

Yes

1

AEC-Q100

95 μA

-15 V

Tape And Reel

15 V

Small Outline, Very Thin Profile, Shrink Pitch

TSOP5/6,.11,38

22 V

0.037 in (0.95 mm)

125 °C (257 °F)

60 nA

5.5 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.039 in (1 mm)

0.064 in (1.625 mm)

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

LM2903HYPT

STMicroelectronics

Comparator

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

15 mV

400 nA

Yes

2

AEC-Q100

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

36 V

0.026 in (0.65 mm)

150 °C (302 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

0.173 in (4.4 mm)

INA300AIDGSR

Texas Instruments

Comparator

Automotive

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

500 uV

10 uA

Yes

1

100 dB

135 μA

Tape And Reel

3.3 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

10 nA

36 V

100 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LMH7220MK/NOPB

Texas Instruments

Comparator

Automotive

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

9.5 mV

500 nA

Yes

1

10 mA

Tape And Reel

5 V

2.7/5/12 V

Small Outline, Very Thin Profile, Shrink Pitch

TSOP6,.11,37

Comparators

13.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

5 uA

3.63 ns

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.065 in (1.65 mm)

No

e3

30 s

260 °C (500 °F)

0.117 in (2.97 mm)

MCP6544-E/ST

Microchip Technology

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

7 mV

5 nA

Yes

4

CMOS

1 μA

Tube

5 V

1.6/5.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

4 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

40

260 °C (500 °F)

0.197 in (5 mm)

TLC339QD

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

10 mV

30 nA

Yes

4

CMOS

175 μA

5 V

5 V

Small Outline

SOP14,.25

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

30 nA

2.5 µs

Open-Drain

-40 °C (-40 °F)

Dual

R-PDSO-G14

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

0.341 in (8.65 mm)

TLV1701AIDBVT

Texas Instruments

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

5.5 mV

20 uA

Yes

1

BIPOLAR

75 μA

Small Outline, Low Profile, Shrink Pitch

Comparators

40 V

0.037 in (0.95 mm)

125 °C (257 °F)

15 nA

560 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

2

0.057 in (1.45 mm)

0.063 in (1.6 mm)

e4

260 °C (500 °F)

0.114 in (2.9 mm)

LM211QDRG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

4 mV

150 nA

Yes

1

BIPOLAR

6 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

100 nA

115 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

LM211QD

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

4 mV

150 nA

Yes

1

BIPOLAR

6 mA

-15 V

Tube

15 V

±15 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

100 nA

115 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

TLV3502AIDG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

6.5 mV

10 pA

Yes

2

10 mA

Tube

5 V

3/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

10 pA

7.5 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TLV1701AIDCKT

Texas Instruments

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

5.5 mV

20 uA

Yes

1

BIPOLAR

75 μA

Small Outline, Thin Profile, Shrink Pitch

Comparators

40 V

0.026 in (0.65 mm)

125 °C (257 °F)

15 nA

560 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

2

0.043 in (1.1 mm)

0.049 in (1.25 mm)

e4

30 s

260 °C (500 °F)

0.079 in (2 mm)

TLV3491AIDBVT

Texas Instruments

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

15 mV

10 pA

Yes

1

CMOS

1.2 μA

Tape And Reel

5 V

2/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

5.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

10 pA

12 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

2

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

TLV6700DDCR

Texas Instruments

Comparator

Automotive

Gull Wing

6

TSOP

Rectangular

Plastic/Epoxy

3 mV

15 nA

Yes

2

26 μA

5 V

Small Outline, Thin Profile

Comparators

20 V

0.037 in (0.95 mm)

125 °C (257 °F)

15 nA

29 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G6

2

0.043 in (1.1 mm)

0.063 in (1.6 mm)

e4

260 °C (500 °F)

0.114 in (2.9 mm)

NCV2903DMR2G

Onsemi

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

15 mV

500 nA

Yes

2

BIPOLAR

AEC-Q100

2.5 mA

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

1.5 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LM2903BIDGKR

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

2.5 mV

25 nA

Yes

2

BIPOLAR

800 μA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

38 V

0.026 in (0.65 mm)

125 °C (257 °F)

25 nA

1 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LTC6752HS5#TRMPBF

Analog Devices

Comparator

Automotive

Gull Wing

5

VSSOP

Rectangular

Plastic/Epoxy

8.5 mV

2.1 uA

Yes

1

CMOS

5.9 mA

Tape And Reel

2.5 V

Small Outline, Very Thin Profile, Shrink Pitch

TSOP5,.11,37

Comparators

3.6 V

0.037 in (0.95 mm)

125 °C (257 °F)

1.25 uA

2.9 ns

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

0.039 in (1 mm)

0.064 in (1.625 mm)

e3

0.114 in (2.9 mm)

TLV3701IDG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

7 mV

1.5 nA

Yes

1

CMOS

1 μA

0 V

5 V

±1.35/±8/2.7/16 V

Small Outline

SOP8,.25

Comparators

17 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 pA

240 µs

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TLV3701QDBVREP

Texas Instruments

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

0 V

5 mV

100 pA

Yes

1

CMOS

800 nA

0 V

Tape And Reel

5 V

±1.35/±8/2.7/16 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

17 V

0.037 in (0.95 mm)

125 °C (257 °F)

100 pA

240 µs

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

INA301A3QDGKTQ1

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

35 uV

Yes

1

100 dB

AEC-Q100

700 μA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

4 V/us

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

36 V

750 ns

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold Silver

Dual

S-PDSO-G8

2

0.043 in (1.1 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LTC6752HSC6-1#TRMPBF

Analog Devices

Comparator

Automotive

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

8.5 mV

2.1 uA

Yes

1

CMOS

5.9 mA

Tape And Reel

2.5 V

Small Outline, Very Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

3.6 V

0.026 in (0.65 mm)

125 °C (257 °F)

1.25 uA

2.9 ns

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.049 in (1.25 mm)

e3

0.079 in (2 mm)

MCP6566T-E/OTVAO

Microchip Technology

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

10 mV

5 nA

Yes

1

CMOS

AEC-Q100; TS 16949

130 μA

Tape And Reel

1.8 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

6.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

56 ns

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

0.057 in (1.45 mm)

0.061 in (1.55 mm)

e3

0.114 in (2.9 mm)

TLV7011DBVR

Texas Instruments

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

8 mV

5 pA

Yes

1

10 μA

1.8 V

Small Outline, Low Profile, Shrink Pitch

Comparators

6 V

0.037 in (0.95 mm)

125 °C (257 °F)

5 pA

310 ns

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

e4

260 °C (500 °F)

0.114 in (2.9 mm)

TLV3691IDCKR

Texas Instruments

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

22 mV

20 nA

Yes

1

150 nA

Tape And Reel

0.9/6.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

100 pA

40 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

2

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

TS331ICT

STMicroelectronics

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

6 mV

100 nA

Yes

1

68 dB

38 μA

Tape And Reel

1.8 V

1.8/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

420 ns

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

30 s

260 °C (500 °F)

0.079 in (2 mm)

LM2901QDRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

15 mV

-500 nA

Yes

4

BIPOLAR

AEC-Q100

2.5 mA

Tape And Reel

5 V

5 V

Small Outline

SOP14,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

-250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.341 in (8.65 mm)

LM2903AVQPWRG4Q1

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

0 V

7 mV

-500 nA

Yes

2

BIPOLAR

AEC-Q100

1 mA

0 V

Tape And Reel

5 V

5/32 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

50 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.173 in (4.4 mm)

NCV391SN2T1G

Onsemi

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

1

BIPOLAR

AEC-Q100

1.25 mA

5 V

2/36 V

Small Outline, Thin Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

36 V

0.037 in (0.95 mm)

125 °C (257 °F)

250 nA

850 ns

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.059 in (1.5 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

TLV1701QDBVRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

6.3 mV

20 nA

Yes

1

AEC-Q100

75 μA

Small Outline, Low Profile, Shrink Pitch

Comparators

40 V

0.037 in (0.95 mm)

125 °C (257 °F)

15 nA

560 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

2

0.057 in (1.45 mm)

0.063 in (1.6 mm)

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

LM2903QDGKRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

7 mV

-500 nA

Yes

2

BIPOLAR

AEC-Q100

1 mA

0 V

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

50 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold Silver

Dual

S-PDSO-G8

2

0.043 in (1.1 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

ADCMP361YRJZ-REEL7

Analog Devices

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

5 nA

Yes

1

10 μA

Tape And Reel, 7 Inch

3.3 V

1.7/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

6 V

0.037 in (0.95 mm)

125 °C (257 °F)

10 µs

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

LMV762MM/NOPB

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1 mV

50 pA

Yes

2

AEC-Q100

1.4 mA

Tape And Reel

2.7 V

2.7/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 pA

120 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LTC6752HMS8-2#PBF

Analog Devices

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

8.5 mV

2.1 uA

Yes

1

CMOS

2.5 mA

2.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

1.25 uA

2.9 ns

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

0.043 in (1.1 mm)

0.118 in (3 mm)

e3

0.118 in (3 mm)

MCP6542-E/MS

Microchip Technology

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

7 mV

5 nA

Yes

2

CMOS

1 μA

Tube

5 V

1.6/5.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

4 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

LT6703HVHS5-3#TRMPBF

Analog Devices

Comparator

Automotive

Gull Wing

5

VSSOP

Rectangular

Plastic/Epoxy

10 nA

Yes

1

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

TLV7031DCKR

Texas Instruments

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

8 mV

2 pA

Yes

1

900 nA

1.8 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

2 pA

3 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

2

0.043 in (1.1 mm)

0.049 in (1.25 mm)

e4

30 s

260 °C (500 °F)

0.079 in (2 mm)

LM211QDR

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

4 mV

150 nA

Yes

1

BIPOLAR

6 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

100 nA

115 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

TLV3492AIDCNRG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

LSSOP

Rectangular

Plastic/Epoxy

15 mV

10 pA

Yes

2

CMOS

1.2 μA

5 V

2/5 V

Small Outline, Low Profile, Shrink Pitch

TSSOP8,.1

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

12 µs

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

ADCMP600BRJZ-R2

Analog Devices

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

BIPOLAR

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

6 V

0.037 in (0.95 mm)

125 °C (257 °F)

5 uA

5 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e3

260 °C (500 °F)

0.114 in (2.9 mm)

MCP65R41T-2402E/CHY

Microchip Technology

Comparator

Automotive

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

10 mV

5 nA

Yes

1

CMOS

TS 16949

4 μA

Tape And Reel

5 V

2/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Comparators

7 V

0.037 in (0.95 mm)

125 °C (257 °F)

4 µs

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.057 in (1.45 mm)

0.061 in (1.55 mm)

No

e4

40

260 °C (500 °F)

0.114 in (2.9 mm)

LMV761MF

Texas Instruments

Comparator

Automotive

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

1 mV

50 pA

Yes

1

AEC-Q100

700 μA

Tape And Reel

5 V

2.7/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Comparators

5.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

5 pA

225 ns

Push-Pull

-40 °C (-40 °F)

Tin/Lead

Dual

R-PDSO-G6

1

0.048 in (1.22 mm)

0.063 in (1.6 mm)

No

e0

260 °C (500 °F)

0.115 in (2.92 mm)

LT6703HVHS5-3#TRPBF

Analog Devices

Comparator

Automotive

Gull Wing

5

VSSOP

Rectangular

Plastic/Epoxy

10 nA

Yes

1

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

LM2903BQDGKRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

2.5 mV

25 nA

Yes

2

BIPOLAR

AEC-Q100

800 μA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

25 nA

1 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LT6700HS6-1#PBF

Analog Devices

Comparator

Automotive

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

50 nA

Yes

2

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin - annealed

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

LTC6752HUD-3#PBF

Analog Devices

Comparator

Automotive

No Lead

12

HVQCCN

Square

Plastic/Epoxy

8.5 mV

2.1 uA

Yes

1

CMOS

2.5 mA

2.5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC12,.12SQ,20

Comparators

5.5 V

0.02 in (0.5 mm)

125 °C (257 °F)

1.25 uA

2.9 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-PQCC-N12

0.031 in (0.8 mm)

0.118 in (3 mm)

e3

0.118 in (3 mm)

TLV7031DBVR

Texas Instruments

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

8 mV

2 pA

Yes

1

900 nA

5 V

Small Outline, Low Profile, Shrink Pitch

Comparators

7 V

0.037 in (0.95 mm)

125 °C (257 °F)

2 pA

3 ns

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

e4

260 °C (500 °F)

0.114 in (2.9 mm)

INA301A1QDGKTQ1

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

125 uV

Yes

1

100 dB

AEC-Q100

700 μA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

4 V/us

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

36 V

750 ns

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold Silver

Dual

S-PDSO-G8

2

0.043 in (1.1 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.