Automotive Comparators 1,339

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Minimum Isolation Voltage Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Sub-Category Nominal Slow Rate Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Nominal Response Time Output Type Minimum Operating Temperature Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

TLV3491AIDBVR

Texas Instruments

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

15 mV

10 pA

Yes

1

CMOS

1.2 μA

Tape And Reel

5 V

2/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

5.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

10 pA

12 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

2

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

LM2901Q4T

STMicroelectronics

Comparator

Automotive

No Lead

16

HVQCCN

Square

Plastic/Epoxy

15 mV

400 nA

Yes

4

BIPOLAR

2.5 mA

Tape And Reel

5 V

5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.12SQ,20

Comparators

36 V

0.02 in (0.5 mm)

125 °C (257 °F)

250 nA

Open-Collector

-40 °C (-40 °F)

Matte Tin

Quad

S-PQCC-N16

1

0.039 in (1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

TS391IYLT

STMicroelectronics

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

1

BIPOLAR

AEC-Q100

1.25 mA

Tape And Reel

5 V

±1/±18/2/36 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

36 V

0.037 in (0.95 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Tin

Dual

R-PDSO-G5

0.057 in (1.45 mm)

0.064 in (1.625 mm)

No

e3

0.114 in (2.9 mm)

LM211QDRG4Q1

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

3 mV

100 nA

Yes

1

BIPOLAR

AEC-Q100

6 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

100 nA

115 ns

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LM2901DRE4

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

7 mV

500 nA

Yes

4

BIPOLAR

2.5 mA

Tape And Reel

5 V

5 V

Small Outline

SOP14,.24

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

MCP6566T-E/OT

Microchip Technology

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

10 mV

5 nA

Yes

1

CMOS

130 μA

Tape And Reel

1.8 V

2/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

6.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

5 nA

56 ns

Open-Drain

-40 °C (-40 °F)

Matte Tin - annealed

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.061 in (1.55 mm)

No

e3

40

260 °C (500 °F)

0.114 in (2.9 mm)

TLV7011DCKT

Texas Instruments

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

8 mV

5 pA

Yes

1

10 μA

1.8 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 pA

310 ns

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

2

0.043 in (1.1 mm)

0.049 in (1.25 mm)

e4

260 °C (500 °F)

0.079 in (2 mm)

NCV2903DR2G

Onsemi

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

15 mV

500 nA

Yes

2

BIPOLAR

AEC-Q100

2.5 mA

5 V

5 V

Small Outline

SOP8,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 nA

1.5 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TLV3401IDBVR

Texas Instruments

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

1

640 nA

0 V

Tape And Reel

5 V

±1.35/±8/2.7/16 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

17 V

0.037 in (0.95 mm)

125 °C (257 °F)

100 pA

175 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

TLV3491AIDBVRG4

Texas Instruments

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

15 mV

10 pA

Yes

1

CMOS

1.2 μA

Tape And Reel

5 V

2/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

5.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

10 pA

12 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

2

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

TLV3501AIDBV

Texas Instruments

Comparator

Automotive

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

6.5 mV

10 pA

Yes

1

5 V

Small Outline, Low Profile, Shrink Pitch

Comparators

5.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

7.5 ns

Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-G6

0.057 in (1.45 mm)

0.063 in (1.6 mm)

0.114 in (2.9 mm)

TS391RILT

STMicroelectronics

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

1

BIPOLAR

1.25 mA

Tape And Reel

5 V

±1/±18/2/36 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

36 V

0.037 in (0.95 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

TLV3402IDGKR

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

2

1.28 μA

0 V

Tape And Reel

5 V

±1.35/±8/2.7/16 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

17 V

0.026 in (0.65 mm)

125 °C (257 °F)

100 pA

175 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

LM211QDRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

3 mV

100 nA

Yes

1

BIPOLAR

AEC-Q100

6 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

100 nA

165 ns

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TLV3492AIDCNR

Texas Instruments

Comparator

Automotive

Gull Wing

8

LSSOP

Rectangular

Plastic/Epoxy

15 mV

10 pA

Yes

2

CMOS

2.4 μA

Tape And Reel

5 V

2/5 V

Small Outline, Low Profile, Shrink Pitch

TSSOP8,.1

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

12 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

LMV331IDCKR

Texas Instruments

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

1

BIPOLAR

120 μA

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

600 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

TLV3201AIDBV

Texas Instruments

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

6 mV

5 nA

Yes

1

5 V

Small Outline, Low Profile, Shrink Pitch

Comparators

7 V

0.037 in (0.95 mm)

125 °C (257 °F)

47 ns

Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-G5

0.057 in (1.45 mm)

0.063 in (1.6 mm)

0.114 in (2.9 mm)

MCP6561T-E/LT

Microchip Technology

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

10 mV

5 nA

Yes

1

CMOS

130 μA

Tape And Reel

1.8 V

2/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

56 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e3

260 °C (500 °F)

0.079 in (2 mm)

LM211QDREP

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

3 mV

150 nA

Yes

1

BIPOLAR

6 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

100 nA

115 ns

Open-Collector, Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TLV6700DDCT

Texas Instruments

Comparator

Automotive

Gull Wing

6

TSOP

Rectangular

Plastic/Epoxy

3 mV

15 nA

Yes

2

26 μA

5 V

Small Outline, Thin Profile

Comparators

20 V

0.037 in (0.95 mm)

125 °C (257 °F)

15 nA

29 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G6

2

0.043 in (1.1 mm)

0.063 in (1.6 mm)

e4

260 °C (500 °F)

0.114 in (2.9 mm)

MCP6562T-E/MS

Microchip Technology

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

10 mV

5 nA

Yes

2

CMOS

260 μA

Tape And Reel

1.8 V

2/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

6.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

56 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin - annealed

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

40

260 °C (500 °F)

0.118 in (3 mm)

TLV3501AID

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

6.5 mV

10 pA

Yes

1

5 mA

Tube

5 V

3/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

10 pA

7.5 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TLV3401IDBVT

Texas Instruments

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

1

640 nA

0 V

Tape And Reel

5 V

±1.35/±8/2.7/16 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

17 V

0.037 in (0.95 mm)

125 °C (257 °F)

100 pA

175 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

LM2901YDT

STMicroelectronics

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

15 mV

400 nA

Yes

4

BIPOLAR

AEC-Q100

2.5 mA

0 V

Tape And Reel

5 V

5 V

Small Outline

SOP14,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

3

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.341 in (8.65 mm)

MCP6541T-E/OTVAO

Microchip Technology

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

7 mV

5 nA

Yes

1

CMOS

AEC-Q100; TS 16949

1 μA

Tape And Reel

5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

7 V

0.037 in (0.95 mm)

125 °C (257 °F)

4 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

0.057 in (1.45 mm)

0.061 in (1.55 mm)

e3

0.114 in (2.9 mm)

TLV3501AZQDBVRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

6.5 mV

10 pA

Yes

1

AEC-Q100

5 mA

2.7 V

Small Outline, Low Profile, Shrink Pitch

Comparators

5.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

10 pA

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G6

3

0.057 in (1.45 mm)

0.063 in (1.6 mm)

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

MCP6541T-E/OTGVAO

Microchip Technology

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

7 mV

5 nA

Yes

1

CMOS

TS 16949

1 μA

5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

7 V

0.037 in (0.95 mm)

125 °C (257 °F)

4 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

0.057 in (1.45 mm)

0.061 in (1.55 mm)

e3

0.114 in (2.9 mm)

LM2901DG4

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

7 mV

500 nA

Yes

4

BIPOLAR

2.5 mA

Tube

5 V

5 V

Small Outline

SOP14,.24

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

TLV3501AIDG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

6.5 mV

10 pA

Yes

1

5 mA

Tube

5 V

3/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

10 pA

7.5 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LMV331IDCKT

Texas Instruments

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

1

BIPOLAR

120 μA

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

600 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

LMV762MMX/NOPB

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1 mV

50 pA

Yes

2

AEC-Q100

1.4 mA

Tape And Reel

2.7 V

2.7/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 pA

120 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LMV331IDCKRE4

Texas Instruments

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

1

BIPOLAR

120 μA

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

600 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

LM2901PT

STMicroelectronics

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

0 V

15 mV

400 nA

Yes

4

BIPOLAR

2.5 mA

0 V

Tape And Reel

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

TLV3491AIDBVTG4

Texas Instruments

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

15 mV

10 pA

Yes

1

CMOS

1.2 μA

Tape And Reel

5 V

2/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

5.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

10 pA

12 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

2

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

ADCMP608BKSZ-REEL7

Analog Devices

Comparator

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

5 mV

400 nA

Yes

1

CMOS

1.3 mA

Tape And Reel, 7 Inch

3.3 V

3.3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

2 uA

60 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

MCP6561T-E/LTVAO

Microchip Technology

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

10 mV

5 nA

Yes

1

CMOS

AEC-Q100

130 μA

Tape And Reel

1.8 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

56 ns

Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-G5

0.043 in (1.1 mm)

0.049 in (1.25 mm)

0.079 in (2 mm)

TS3021ICT

STMicroelectronics

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

10 mV

300 nA

Yes

1

135 μA

Tape And Reel

2 V

1.8/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

160 nA

42 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

30 s

260 °C (500 °F)

0.079 in (2 mm)

LMV331IDCKRG4

Texas Instruments

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

1

BIPOLAR

120 μA

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

600 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

TLV7042DGKR

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

8 mV

2 pA

Yes

2

1.5 μA

1.8 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

2 pA

3 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LT6703HVHS5-2#TRMPBF

Analog Devices

Comparator

Automotive

Gull Wing

5

VSSOP

Rectangular

Plastic/Epoxy

10 nA

Yes

1

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

NCS2250SN2T1G

Onsemi

Comparator

Automotive

Gull Wing

5

TSOP

Rectangular

Plastic/Epoxy

6 mV

1 nA

Yes

1

250 μA

Tape And Reel

5 V

Small Outline, Thin Profile

TSOP5/6,.11,37

Comparators

6 V

0.037 in (0.95 mm)

125 °C (257 °F)

90 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.059 in (1.5 mm)

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

TLV3402IDGKRG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

2

1.9 μA

0 V

5 V

±1.35/±8/2.7/16 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

17 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 pA

175 µs

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LMV762MMX

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1 mV

50 pA

Yes

2

AEC-Q100

1.4 mA

Tape And Reel

5 V

2.7/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 pA

225 ns

Push-Pull

-40 °C (-40 °F)

Tin/Lead

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

260 °C (500 °F)

0.118 in (3 mm)

TLV3401IDBVRG4

Texas Instruments

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

1

640 nA

0 V

Tape And Reel

5 V

±1.35/±8/2.7/16 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

17 V

0.037 in (0.95 mm)

125 °C (257 °F)

100 pA

175 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

TLV3201AIDCK

Texas Instruments

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

6 mV

5 nA

Yes

1

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

47 ns

Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-G5

0.043 in (1.1 mm)

0.049 in (1.25 mm)

0.079 in (2 mm)

LTC6752HSC6-4#TRMPBF

Analog Devices

Comparator

Automotive

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

8.5 mV

2.1 uA

Yes

1

CMOS

2.5 mA

Tape And Reel

2.5 V

Small Outline, Very Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

1.25 uA

2.9 ns

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.049 in (1.25 mm)

e3

0.079 in (2 mm)

ADCMP600BRJZ-REEL7

Analog Devices

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

BIPOLAR

Tape And Reel, 7 Inch

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

6 V

0.037 in (0.95 mm)

125 °C (257 °F)

5 uA

5 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e3

40

260 °C (500 °F)

0.114 in (2.9 mm)

TLV1701AIDBVR

Texas Instruments

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

5.5 mV

20 uA

Yes

1

BIPOLAR

75 μA

Small Outline, Low Profile, Shrink Pitch

Comparators

40 V

0.037 in (0.95 mm)

125 °C (257 °F)

15 nA

560 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

2

0.057 in (1.45 mm)

0.063 in (1.6 mm)

e4

260 °C (500 °F)

0.114 in (2.9 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.