Industrial Comparators 2,400+

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Nominal Bandwidth (3dB)	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
LMC7221AIM	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	8 mV	0.04 pA	Yes	1	CMOS	18 μA	0 V		5 V	2.7/15 V	Small Outline	SOP8,.25	Comparators	16 V	0.05 in (1.27 mm)	85 °C (185 °F)		7 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.753 mm)	0.154 in (3.899 mm)	No		e0	20 s	235 °C (455 °F)	0.193 in (4.902 mm)
TL3016IPWG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy	-7 V	3.5 mV	10 uA	Yes	1	BIPOLAR	12.5 mA	-5 V		5 V	±5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)	10 uA	7.8 µs		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No		e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
LPV7215MGX	Texas Instruments	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	2.9 mV		Yes	1	BICMOS		0 V		2.7 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)		15 µs	Push-Pull	-40 °C (-40 °F)	Tin	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No		e3			0.079 in (2 mm)
5962-01-420-0945	Texas Instruments	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy		15 mV		No		BIPOLAR	2.5 mA				5/30 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	85 °C (185 °F)	250 nA	1.3 µs		-40 °C (-40 °F)		Dual	R-PDIP-T8				No
LMC7225IM5	Texas Instruments	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy	0 V	8 mV	1 nA	Yes	1	CMOS	1 μA	0 V	Tape And Reel	2.7 V	2.7/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	10 V	0.038 in (0.953 mm)	85 °C (185 °F)	0.05 pA	22 µs	Open-Drain	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G5	1	0.048 in (1.22 mm)	0.063 in (1.6 mm)	No		e0		260 °C (500 °F)	0.115 in (2.92 mm)
LMC7221BIM5	Texas Instruments	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy	0 V	18 mV	0.04 pA	Yes	1	CMOS	14 μA	0 V	Tape And Reel	5 V	2.7/15 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	16 V	0.038 in (0.953 mm)	85 °C (185 °F)	0.4 pA	7 µs	Open-Drain	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G5	1	0.048 in (1.22 mm)	0.063 in (1.6 mm)	No		e0		260 °C (500 °F)	0.115 in (2.92 mm)
TLV7211AIDG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	8 mV		Yes	1	CMOS	14 μA	0 V		5 V	3/15 V	Small Outline	SOP8,.25	Comparators	16 V	0.05 in (1.27 mm)	85 °C (185 °F)		10 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
LMV7272TL	Texas Instruments	Comparator	Industrial	Ball	8	VFBGA	Square	Plastic/Epoxy	0 V	4 mV		Yes	1	BICMOS		0 V		1.8 V		Grid Array, Very Thin Profile, Fine Pitch		Comparators	5.5 V	0.02 in (0.5 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Tin Lead	Bottom	S-PBGA-B8	1	0.024 in (0.6 mm)	0.06 in (1.514 mm)	No		e0			0.06 in (1.514 mm)
TLV1391IDBV	Texas Instruments	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		9 mV	-400 nA	Yes	1	BIPOLAR	150 μA			3 V	3/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	7 V	0.037 in (0.95 mm)	85 °C (185 °F)	250 nA	700 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.063 in (1.6 mm)	No					0.114 in (2.9 mm)
LM3302MWA	Texas Instruments	Comparator	Industrial	No Lead		DIE			0 V	40 mV	1 uA	Yes	4	BIPOLAR		0 V		5 V		Uncased Chip		Comparators	28 V		85 °C (185 °F)		1.3 µs	Open-Collector	-40 °C (-40 °F)		Upper	X-XUUC-N				No
TLC371IP	Texas Instruments	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy		7 mV	2 nA	No	1	CMOS	200 μA			5 V	5 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	85 °C (185 °F)	2 nA	650 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No					0.386 in (9.81 mm)
LPV7215MG	Texas Instruments	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	2.9 mV		Yes	1	BICMOS	1.2 μA	0 V		2.7 V	2/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)		15 µs	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No		e0		260 °C (500 °F)	0.079 in (2 mm)
LM3302N	Texas Instruments	Comparator	Industrial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy		40 mV	-1 uA	No	4	BIPOLAR	2 mA		Tube	5 V	5 V	In-Line	DIP14,.3	Comparators	28 V	0.1 in (2.54 mm)	85 °C (185 °F)	500 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No		e4			0.76 in (19.305 mm)
TLC339INE4	Texas Instruments	Comparator	Industrial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy		7 mV	2 nA	No	4	CMOS	125 μA			5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	85 °C (185 °F)	2 nA	2.5 µs	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No		e4			0.76 in (19.305 mm)
TLC339IDG4	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		7 mV	2 nA	Yes	4	CMOS	125 μA			5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)		2.5 µs	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
TLC371IDR	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		7 mV	2 nA	Yes	1	CMOS	200 μA			5 V		Small Outline			18 V	0.05 in (1.27 mm)	85 °C (185 °F)		650 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No					0.193 in (4.9 mm)
TLC374IDG4	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		7 mV	2 nA	Yes	4	CMOS	800 μA			5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	2 nA	650 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
TLV2393IPW-00LE	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		9 mV	-400 nA	Yes	2	BIPOLAR				3 V		Small Outline, Thin Profile, Shrink Pitch			7 V	0.026 in (0.65 mm)	105 °C (221 °F)		450 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)	No					0.173 in (4.4 mm)
LMH7220MGX/NOPB	Texas Instruments	Comparator	Industrial	Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy		9.5 mV		Yes	1		14 mA				2.7/5/12 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08	Comparators		0.026 in (0.65 mm)	85 °C (185 °F)	500 nA			-40 °C (-40 °F)		Dual	R-PDSO-G6		0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	1.25 MHz				0.079 in (2 mm)
LM3302D	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		40 mV	-1 uA	Yes	4	BIPOLAR	2 mA		Tube	5 V	5 V	Small Outline	SOP14,.25	Comparators	28 V	0.05 in (1.27 mm)	85 °C (185 °F)	500 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4		260 °C (500 °F)	0.341 in (8.65 mm)
LMC7221BIM	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	18 mV	0.04 pA	Yes	1	CMOS	14 μA	0 V	Tube	5 V	2.7/15 V	Small Outline	SOP8,.25	Comparators	16 V	0.05 in (1.27 mm)	85 °C (185 °F)	0.4 pA	7 µs	Open-Drain	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G8	1	0.069 in (1.753 mm)	0.154 in (3.899 mm)	No		e0		235 °C (455 °F)	0.193 in (4.902 mm)
TLC352IPWG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy	0 V	7 mV	2 nA	Yes	2	CMOS	300 μA	0 V	Tube	5 V	1.5/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	85 °C (185 °F)	20 nA	650 ns	Open-Drain	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No		e4		260 °C (500 °F)	0.173 in (4.4 mm)
LMV7239MWC	Texas Instruments	Comparator	Industrial	No Lead		DIE			0 V	6 mV	400 nA	Yes	1	BIPOLAR		0 V		2.7 V		Uncased Chip		Comparators	5.5 V		85 °C (185 °F)		45 ns	Push-Pull	-40 °C (-40 °F)		Upper	X-XUUC-N	1			No
LMV339MT	Texas Instruments	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		7 mV	250 nA	Yes	4	BICMOS	300 μA	0 V	Tube	2.7 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	250 nA	450 ns	Open-Collector	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		e0	40	260 °C (500 °F)	0.197 in (5 mm)
TL3016IPW	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy	-7 V	3 mV	10 uA	Yes	1	BIPOLAR	12.5 mA	-5 V	Tube	5 V	±5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)	10 uA	7.8 µs		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No		e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
TLV7211AID	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	8 mV	0.04 pA	Yes	1	CMOS	14 μA	0 V	Tube	5 V	3/15 V	Small Outline	SOP8,.25	Comparators	16 V	0.05 in (1.27 mm)	85 °C (185 °F)	0.04 pA	10 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4		260 °C (500 °F)	0.193 in (4.9 mm)
TL3116IDRG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-7 V	3.5 mV	1.5 uA	Yes	1	BIPOLAR	15 mA	-5 V		5 V	5/±5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	85 °C (185 °F)	1.1 uA	9.9 ns		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLV2354IPW	Texas Instruments	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		5 mV	2 nA	Yes	4	CMOS	600 μA		Tube	3 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	8 V	0.026 in (0.65 mm)	85 °C (185 °F)	2 nA	640 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
LMV393PWR	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		7 mV		Yes	2	CMOS	250 μA				2.7/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators		0.025 in (0.635 mm)	85 °C (185 °F)	250 nA	1 µs		-40 °C (-40 °F)		Dual	R-PDSO-G8				No
TLC3704IJ	Texas Instruments	Comparator	Industrial	Through-Hole	14	DIP	Rectangular	Ceramic, Glass-Sealed		7 mV	2 nA	No	4	CMOS	125 μA			5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	85 °C (185 °F)		1.1 µs	Totem Pole	-40 °C (-40 °F)		Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No					0.77 in (19.56 mm)
LMC6772BIM	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	18 mV	0.4 pA	Yes	2	CMOS	20 μA	0 V	Tube	5 V	2.7/15 V	Small Outline	SOP8,.25	Comparators	16 V	0.05 in (1.27 mm)	85 °C (185 °F)	0.4 pA	4 µs	Open-Collector	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e0		235 °C (455 °F)	0.193 in (4.9 mm)
TL3116IPWR	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy	-7 V	3 mV	1.5 uA	Yes	1	BIPOLAR	14.7 mA	-5 V	Tape And Reel	5 V	5/±5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)	1.1 uA	9.9 ns		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No		e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
TLC372IDG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		7 mV	2 nA	Yes	2	CMOS	400 μA			5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	2 nA	650 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TL393IPWLE	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		9 mV	-400 nA	Yes	2	BIPOLAR	1.2 mA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	7 V	0.026 in (0.65 mm)	105 °C (221 °F)	250 nA	650 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)	No					0.173 in (4.4 mm)
TLV1393CD	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		9 mV	-400 nA	Yes	2	BIPOLAR	300 μA			3 V	3/5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	105 °C (221 °F)	250 nA	700 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No					0.193 in (4.9 mm)
TLV2352IDG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		7 mV	2 nA	Yes	2	CMOS	400 μA			3 V	3/5 V	Small Outline	SOP8,.25	Comparators	8 V	0.05 in (1.27 mm)	85 °C (185 °F)		640 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLC352IJG	Texas Instruments	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Ceramic, Glass-Sealed		7 mV	2 nA	No	2	CMOS	400 μA			5 V	5 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	85 °C (185 °F)	2 nA	650 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No					0.378 in (9.6 mm)
TLV7211IDCKR	Texas Instruments	Comparator	Industrial	Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy	0 V	18 mV	0.04 pA	Yes	1	CMOS	14 μA	0 V	Tape And Reel	5 V	3/15 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08	Comparators	16 V	0.026 in (0.65 mm)	85 °C (185 °F)	0.04 pA	10 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G6	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No		e4		260 °C (500 °F)	0.079 in (2 mm)
LM2901MEP/NOPB	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	0 V	7 mV	250 nA	Yes	4					5 V		Small Outline		Comparators	36 V	0.05 in (1.27 mm)	85 °C (185 °F)		1.3 µs	Open-Collector	-40 °C (-40 °F)	Tin	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e3			0.34 in (8.64 mm)
TLC374IN	Texas Instruments	Comparator	Industrial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy		7 mV	2 nA	No	4	CMOS	600 μA		Tube	5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	85 °C (185 °F)	30 pA	650 ns	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDIP-T14	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)	No		e4		260 °C (500 °F)	0.76 in (19.305 mm)
TLV2393IP-00	Texas Instruments	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy		9 mV	-400 nA	No	2	BIPOLAR				3 V		In-Line			7 V	0.1 in (2.54 mm)	105 °C (221 °F)		450 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No					0.386 in (9.81 mm)
TLC393IPE4	Texas Instruments	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy		5 mV	2 nA	No	2	CMOS	40 μA		Tube	5 V	5 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	85 °C (185 °F)	2 pA	2.5 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No		e4			0.386 in (9.81 mm)
TLV1393ID	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		9 mV	-400 nA	Yes	2	BIPOLAR	350 μA			3 V	3/5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	105 °C (221 °F)	250 nA	700 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No					0.193 in (4.9 mm)
TLV1391IDBVRG4	Texas Instruments	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		9 mV	-400 nA	Yes	1	BIPOLAR	175 μA			3 V	3/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	7 V	0.037 in (0.95 mm)	85 °C (185 °F)	250 nA	700 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)	No		e4	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
TLV7211IDG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	18 mV		Yes	1	CMOS	14 μA	0 V		5 V	3/15 V	Small Outline	SOP8,.25	Comparators	16 V	0.05 in (1.27 mm)	85 °C (185 °F)		10 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
LM6511IM/NOPB	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		5 mV	200 nA	Yes	1	BIPOLAR	3.5 mA		Tube	2.7 V	2.7 V	Small Outline	SOP8,.25	Comparators	36 V	0.05 in (1.27 mm)	85 °C (185 °F)	130 nA	180 ns	Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
LM2901JP4	Texas Instruments	Comparator	Industrial	Through-Hole	14	DIP	Rectangular	Ceramic		15 mV		No		BIPOLAR	2.5 mA			5 V	5 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	85 °C (185 °F)		1.3 µs		-40 °C (-40 °F)		Dual	R-XDIP-T14
LMV339MDC	Texas Instruments	Comparator	Industrial	No Lead		DIE				7 mV	250 nA	Yes	4	BICMOS				5 V		Uncased Chip		Comparators	5.5 V		85 °C (185 °F)		600 ns	Open-Collector	-40 °C (-40 °F)		Upper	X-XUUC-N				No

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.