Industrial Comparators 2,400+

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
MAX976ESA+T	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		3 mV	300 nA	Yes	2	CMOS		1.3 mA			3 V	3/5 V	Small Outline	SOP8,.25	Comparators		0.05 in (1.27 mm)	85 °C (185 °F)	300 nA	28 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1			No	e3	30 s	260 °C (500 °F)
MAX995ESD-T	Maxim Integrated	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	0 V	7 mV	10 nA	Yes	4			96 μA	0 V		2.7 V	±1.5/±2.5/3/5 V	Small Outline	SOP14,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	10 nA	210 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.341 in (8.65 mm)
MAX995ESD+T	Analog Devices	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	0 V	7 mV	10 nA	Yes	4			96 μA	0 V		2.7 V	±1.5/±2.5/3/5 V	Small Outline	SOP14,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	10 nA	210 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
MCP6541-I/MS	Microchip Technology	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		7 mV	100 pA	Yes	1	CMOS		1 μA		Tube	5 V	1.6/5.5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)		4 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	40	260 °C (500 °F)	0.118 in (3 mm)
MCP6546-I/MS	Microchip Technology	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		7 mV	100 pA	Yes	1	CMOS	TS 16949	1 μA		Tube	5 V	1.6/5.5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)		3 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	40	260 °C (500 °F)	0.118 in (3 mm)
MCP6546T-I/OT	Microchip Technology	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		7 mV	100 pA	Yes	1	CMOS	TS 16949	1 μA		Tape And Reel	5 V	1.6/5.5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	7 V	0.037 in (0.95 mm)	85 °C (185 °F)		3 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.059 in (1.5 mm)	No	e3		260 °C (500 °F)	0.114 in (2.9 mm)
NCS2200SQ2T2GH	Onsemi	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		8 mV		Yes	1	CMOS		17 μA		Tape And Reel	3 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	105 °C (221 °F)		1.1 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)		e3	30 s	260 °C (500 °F)	0.079 in (2 mm)
TC75W56FU,LF(T	Toshiba	Comparator	Industrial	Gull Wing	8	LSSOP	Rectangular	Plastic/Epoxy		7 mV		Yes	2	CMOS		40 μA			3 V		Small Outline, Low Profile, Shrink Pitch	SOP8,.16,51	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)		30 ns	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.051 in (1.3 mm)	0.11 in (2.8 mm)					0.114 in (2.9 mm)
TC75W56FULF(T	Toshiba	Comparator	Industrial	Gull Wing	8	LSSOP	Rectangular	Plastic/Epoxy		7 mV		Yes	2	CMOS		40 μA			3 V		Small Outline, Low Profile, Shrink Pitch	SOP8,.16,51	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)		30 ns	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.051 in (1.3 mm)	0.11 in (2.8 mm)					0.114 in (2.9 mm)
TL3016ID	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-7 V	3 mV	10 uA	Yes	1	BIPOLAR		12.5 mA	-5 V	Tube	5 V	5/±5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	85 °C (185 °F)	10 uA	7.8 µs		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLC3702IPWG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		7 mV	2 nA	Yes	2	CMOS		65 μA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	85 °C (185 °F)		2.7 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
TLC393IPW	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		5 mV	2 nA	Yes	2	CMOS		40 μA		Tube	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	85 °C (185 °F)	2 pA	2.5 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
TLV2352IPWR	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		5 mV	2 nA	Yes	2	CMOS		300 μA		Tape And Reel	3 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	8 V	0.026 in (0.65 mm)	85 °C (185 °F)	2 nA	640 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
TLV7211AIDBVR	Texas Instruments	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy	0 V	8 mV	0.04 pA	Yes	1	CMOS		14 μA	0 V	Tape And Reel	5 V	3/15 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	16 V	0.037 in (0.95 mm)	85 °C (185 °F)	0.04 pA	10 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)	No	e4	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
TLV7256IDDUR	Texas Instruments	Comparator	Industrial	Gull Wing	8	VSSOP	Rectangular	Plastic/Epoxy		7 mV	4 pA	Yes	2	CMOS		120 μA		Tape And Reel	1.8 V	1.8/5 V	Small Outline, Very Thin Profile, Shrink Pitch	TSSOP8,.12,20	Comparators	7 V	0.02 in (0.5 mm)	85 °C (185 °F)	4 pA	30 ns	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.035 in (0.9 mm)	0.079 in (2 mm)	No	e4	30 s	260 °C (500 °F)	0.091 in (2.3 mm)
UPC271G2-A	Renesas Electronics	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-18 V	7.5 mV	250 nA	Yes	1	BIPOLAR			-15 V		15 V		Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)		200 ns	Open-Collector	-40 °C (-40 °F)	Tin Bismuth	Dual	R-PDSO-G8		0.071 in (1.8 mm)	0.173 in (4.4 mm)		e6	10 s	260 °C (500 °F)	0.205 in (5.2 mm)
AS393MTR-G1	Diodes Incorporated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		7 mV	400 nA	Yes	2	BIPOLAR		3 mA		Tape And Reel	5 V	±1/±18/2/36 V	Small Outline	SOP8,.25	Comparators	40 V	0.05 in (1.27 mm)	85 °C (185 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	3	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
BA10339F-E2	ROHM	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		5 mV	250 nA	Yes	4	BIPOLAR		2 mA			5 V	±1.5/±18/3/36 V	Small Outline	SOP14,.25	Comparators	36 V	0.05 in (1.27 mm)	85 °C (185 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Tin Copper	Dual	R-PDSO-G14		0.063 in (1.6 mm)	0.173 in (4.4 mm)	No	e2	10 s	260 °C (500 °F)	0.343 in (8.7 mm)
LMV393IPWE4	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		9 mV	400 nA	Yes	2	BIPOLAR		250 μA			5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	250 nA	600 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
LMV7239M7	Texas Instruments	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	8 mV	600 nA	Yes	1	BIPOLAR		95 μA	0 V	Tape And Reel	2.7 V	2.7/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	400 nA	68 ns	Push-Pull	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e0		260 °C (500 °F)	0.079 in (2 mm)
LMV7271MG	Texas Instruments	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	4 mV	100 nA	Yes	1	BICMOS		14 μA	0 V	Tape And Reel	1.8 V	1.8/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	100 nA	1.8 µs	Push-Pull	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e0		260 °C (500 °F)	0.079 in (2 mm)
LTC6752ISC6-1#TRPBF	Analog Devices	Comparator	Industrial	Gull Wing	6	VSSOP	Rectangular	Plastic/Epoxy		8.5 mV	2.1 uA	Yes	1	CMOS		5.9 mA		Tape And Reel	2.5 V		Small Outline, Very Thin Profile, Shrink Pitch	TSSOP6,.08	Comparators	3.6 V	0.026 in (0.65 mm)	85 °C (185 °F)	1.25 uA	2.9 ns		-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G6	1	0.039 in (1 mm)	0.049 in (1.25 mm)		e3	30 s	260 °C (500 °F)	0.079 in (2 mm)
MAX9027EBT-T	Maxim Integrated	Comparator	Industrial	Ball	6	VFBGA	Rectangular	Plastic/Epoxy		10 mV	2 nA	Yes	1	BICMOS		1.25 μA			5 V	5 V	Grid Array, Very Thin Profile, Fine Pitch	BGA6,2X3,20	Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)	1 nA	40 µs	Push-Pull	-40 °C (-40 °F)	Tin Lead	Bottom	R-PBGA-B6	1	0.026 in (0.67 mm)	0.046 in (1.16 mm)	No	e0			0.062 in (1.57 mm)
MAX9027EBT+T	Analog Devices	Comparator	Industrial	Ball	6	VFBGA	Rectangular	Plastic/Epoxy		10 mV	2 nA	Yes	1	BICMOS		1.25 μA		Tape And Reel	5 V	5 V	Grid Array, Very Thin Profile, Fine Pitch	BGA6,2X3,20	Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)	1 nA	40 µs	Push-Pull	-40 °C (-40 °F)	Tin Silver Copper	Bottom	R-PBGA-B6	1	0.026 in (0.67 mm)	0.046 in (1.16 mm)	No	e1	30 s	260 °C (500 °F)	0.062 in (1.57 mm)
MAX9064EUK+T	Analog Devices	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy			15 nA	Yes	1	BICMOS		1.1 μA			3.3 V	3.3 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	85 °C (185 °F)		15 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
MAX963ESD	Maxim Integrated	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		2 mV	15 uA	Yes	2	CMOS		22 mA			3 V	3/5 V	Small Outline	SOP14,.25	Comparators	5.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	15 uA	4.5 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.341 in (8.65 mm)
MAX963ESD+	Analog Devices	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		2 mV	15 uA	Yes	2	CMOS		22 mA			3 V	3/5 V	Small Outline	SOP14,.25	Comparators	5.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	15 uA	4.5 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
MAX963ESD-T	Maxim Integrated	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		2 mV	15 uA	Yes	2	CMOS		22 mA			3 V	3/5 V	Small Outline	SOP14,.25	Comparators	5.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	15 uA	4.5 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.341 in (8.65 mm)
MAX963ESD+T	Analog Devices	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		2 mV	15 uA	Yes	2	CMOS		22 mA			3 V	3/5 V	Small Outline	SOP14,.25	Comparators	5.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	15 uA	4.5 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
MAX976ESA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		3 mV	300 nA	Yes	2	CMOS		1.3 mA			5 V	3/5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 nA	28 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	240 °C (464 °F)	0.193 in (4.9 mm)
MAX976ESA+	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		3 mV	300 nA	Yes	2	CMOS		650 μA			5 V	3/5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 nA	28 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
MAX985EUK-T	Maxim Integrated	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy	0 V	7 mV	10 nA	Yes	1			24 μA	0 V		5 V	±1.5/±2.5/3/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	85 °C (185 °F)	10 nA	300 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e0	20 s	240 °C (464 °F)	0.114 in (2.9 mm)
MAX985EUK+T	Analog Devices	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy	0 V	7 mV	10 nA	Yes	1			24 μA	0 V		5 V	±1.5/±2.5/3/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	85 °C (185 °F)	10 nA	300 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
MIC841LBC5TR	Micrel	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy				Yes	1					Tape And Reel	1.6 V		Small Outline, Thin Profile, Shrink Pitch			7 V	0.026 in (0.65 mm)	85 °C (185 °F)		12 µs	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.049 in (1.25 mm)	No				0.079 in (2 mm)
NCX2200GW	NXP Semiconductors	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		30 mV		Yes	1						3 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)		800 ns		-40 °C (-40 °F)	Tin	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e3	30 s	260 °C (500 °F)	0.081 in (2.05 mm)
TL3116IDR	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-7 V	3 mV	1.5 uA	Yes	1	BIPOLAR		14.7 mA	-5 V	Tape And Reel	5 V	5/±5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	85 °C (185 °F)	1.1 uA	9.9 ns		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLC354IDR	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		7 mV	2 nA	Yes	4	CMOS		400 μA			5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	2 nA	650 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.341 in (8.65 mm)
TLC354IDRG4	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		7 mV	2 nA	Yes	4	CMOS		400 μA			5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	2 nA	650 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.341 in (8.65 mm)
TLC3704IDG4	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	-18 V	7 mV	2 nA	Yes	4	CMOS		80 μA		Tube	5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	30 pA	2.7 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.341 in (8.65 mm)
TLV7211IDR	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	18 mV	0.04 pA	Yes	1	CMOS		14 μA	0 V	Tape And Reel	5 V	3/15 V	Small Outline	SOP8,.25	Comparators	16 V	0.05 in (1.27 mm)	85 °C (185 °F)	0.04 pA	10 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.193 in (4.9 mm)
LMC6772BIMX/NOPB	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	18 mV	0.4 pA	Yes	2	CMOS		20 μA	0 V	Tape And Reel	5 V	2.7/15 V	Small Outline	SOP8,.25	Comparators	16 V	0.05 in (1.27 mm)	85 °C (185 °F)	0.4 pA	4 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3		260 °C (500 °F)	0.193 in (4.9 mm)
LMC7215IM/NOPB	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	8 mV	1 nA	Yes	1	CMOS		1 μA	0 V	Tube	2.7 V	2.7/5 V	Small Outline	SOP8,.25	Comparators	10 V	0.05 in (1.27 mm)	85 °C (185 °F)	0.05 pA	17 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.753 mm)	0.154 in (3.899 mm)	No	e3		260 °C (500 °F)	0.193 in (4.902 mm)
LMC7215IMX/NOPB	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	8 mV	1 nA	Yes	1	CMOS		1 μA	0 V	Tape And Reel	2.7 V	2.7/5 V	Small Outline	SOP8,.25	Comparators	10 V	0.05 in (1.27 mm)	85 °C (185 °F)	0.05 pA	17 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.753 mm)	0.154 in (3.899 mm)	No	e3		260 °C (500 °F)	0.193 in (4.902 mm)
LT1018IS8#PBF	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-20 V	1.4 mV	100 nA	Yes	2				0 V		4.5 V		Small Outline		Comparators	40 V	0.05 in (1.27 mm)	85 °C (185 °F)			Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.752 mm)	0.154 in (3.899 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9025 mm)
MAX908ESD	Maxim Integrated	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		3.5 mV	500 nA	Yes	4	BIPOLAR		1.2 mA			5 V	5 V	Small Outline	SOP14,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 nA	45 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	240 °C (464 °F)	0.341 in (8.65 mm)
MAX908ESD+	Analog Devices	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		3.5 mV	500 nA	Yes	4	BIPOLAR		1 mA			5 V	5 V	Small Outline	SOP14,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 nA	45 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
MAX908ESD-T	Maxim Integrated	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		3.5 mV	500 nA	Yes	4	BIPOLAR		1 mA			5 V	5 V	Small Outline	SOP14,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 nA	45 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.341 in (8.65 mm)
MAX908ESD+T	Analog Devices	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		3 mV	500 nA	Yes	4	BIPOLAR		1 mA			5 V	5 V	Small Outline	SOP14,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 nA	45 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.341 in (8.65 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.