Industrial Comparators 2,400+

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
MAX997ESA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		2 mV	15 uA	Yes	1	CMOS		650 μA			3 V	3/5 V	Small Outline	SOP8,.25	Comparators	5.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	15 uA	4.5 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX997ESA+	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		2 mV	15 uA	Yes	1	CMOS		6.5 mA			3 V	3/5 V	Small Outline	SOP8,.25	Comparators	5.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	15 uA	4.5 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLV7211IDBVRG4	Texas Instruments	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy	0 V	18 mV		Yes	1	CMOS		14 μA	0 V		5 V	3/15 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	16 V	0.037 in (0.95 mm)	85 °C (185 °F)		10 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)	No	e4	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
AS331KTR-G1	Diodes Incorporated	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		7 mV	400 nA	Yes	1	BIPOLAR		3 mA		Tape And Reel	5 V	±1/±18/2/36 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	40 V	0.037 in (0.95 mm)	85 °C (185 °F)	400 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	3	0.057 in (1.45 mm)	0.063 in (1.6 mm)	No	e3	30 s	260 °C (500 °F)	0.115 in (2.92 mm)
LMV339DTBR2G	Onsemi	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		9 mV		Yes	4	CMOS		200 μA			2.7 V	2.7/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)		200 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	3	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
LP2901DR	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		9 mV	40 nA	Yes	4	BIPOLAR		100 μA		Tape And Reel	5 V	5 V	Small Outline	SOP14,.25	Comparators	36 V	0.05 in (1.27 mm)	85 °C (185 °F)	25 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.341 in (8.65 mm)
LT1671IS8#TRPBF	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-7 V	4 mV	350 nA	Yes	1				-5 V	Tape And Reel	5 V		Small Outline		Comparators	7 V	0.05 in (1.27 mm)	85 °C (185 °F)		85 ns		-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
LT1711IMS8#TRPBF	Analog Devices	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	-6.3 V	6 mV	10 uA	Yes	1				-5 V	Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	6.3 V	0.026 in (0.65 mm)	85 °C (185 °F)		5.5 ns		-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
LT6703CDC-2#PBF	Analog Devices	Comparator	Industrial	No Lead	3	HVSON	Square	Plastic/Epoxy			10 nA	Yes	1						5 V		Small Outline, Heat Sink/Slug, Very Thin Profile		Comparators	18.5 V	0.02 in (0.5 mm)	85 °C (185 °F)		29 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin - annealed	Dual	S-PDSO-N3	1	0.031 in (0.8 mm)	0.079 in (2 mm)	No	e3	30 s	260 °C (500 °F)	0.079 in (2 mm)
LTC1445IS#PBF	Analog Devices	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		Yes	4	CMOS			0 V		3 V		Small Outline		Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)		14 µs		-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G16	1	0.069 in (1.752 mm)	0.154 in (3.899 mm)	No	e3	30 s	260 °C (500 °F)	0.39 in (9.906 mm)
MAX975EUA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		3 mV	-400 nA	Yes	1	CMOS		500 μA			5.25 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	400 nA	28 ns		-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0		245 °C (473 °F)	0.118 in (3 mm)
MAX975EUA+	Analog Devices	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		3 mV	-400 nA	Yes	1	CMOS		500 μA			5.25 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	400 nA	28 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MCP6547T-I/MS	Microchip Technology	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		7 mV	100 pA	Yes	2	CMOS	TS 16949	2 μA		Tape And Reel	5 V	1.6/5.5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)		3 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3		260 °C (500 °F)	0.118 in (3 mm)
NCV2200SQ2T2G	Onsemi	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		8 mV		Yes	1	CMOS	AEC-Q100	17 μA		Tape And Reel	3 V	1/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	105 °C (221 °F)		1.1 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e3			0.079 in (2 mm)
TLC352IPWRG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy	0 V	7 mV	2 nA	Yes	2	CMOS		400 μA	0 V		5 V	1.5/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	85 °C (185 °F)		650 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
AD8561AN	Analog Devices	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-7 V	7 mV		No	1	BIPOLAR			-5 V		5 V	3/5/±5 V	In-Line	DIP8,.3	Comparators	7 V	0.1 in (2.54 mm)	85 °C (185 °F)		7 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T8		0.21 in (5.33 mm)	0.3 in (7.62 mm)	No	e0			0.389 in (9.88 mm)
ADCMP553BRMZ	Analog Devices	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		10 mV	10 uA	Yes	1	ECL		42 mA			3.3 V	3.3 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	5 uA		Open-Emitter	-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
LM239QT	STMicroelectronics	Comparator	Industrial	No Lead	16	HVQCCN	Square			9 mV	400 nA	Yes	4	BIPOLAR		2.5 mA		Tape And Reel	5 V	5 V	Chip Carrier, Heat Sink/Slug, Very Thin Profile	LCC16,.12SQ,20	Comparators	32 V	0.02 in (0.5 mm)	105 °C (221 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin	Quad	S-XQCC-N16	1	0.039 in (1 mm)	0.118 in (3 mm)	No	e3		260 °C (500 °F)	0.118 in (3 mm)
LM3302DRG4	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		40 mV	-1 uA	Yes	4	BIPOLAR					5 V	5 V	Small Outline	SOP14,.25	Comparators	28 V	0.05 in (1.27 mm)	85 °C (185 °F)	500 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
LMV393IDDURE4	Texas Instruments	Comparator	Industrial	Gull Wing	8	VSSOP	Rectangular	Plastic/Epoxy		9 mV	400 nA	Yes	2	BIPOLAR		250 μA			5 V	2.7/5 V	Small Outline, Very Thin Profile, Shrink Pitch	TSSOP8,.12,20	Comparators	5.5 V	0.02 in (0.5 mm)	85 °C (185 °F)	250 nA	600 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.035 in (0.9 mm)	0.079 in (2 mm)	No	e4	30 s	260 °C (500 °F)	0.091 in (2.3 mm)
LP2901DRE4	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		9 mV	40 nA	Yes	4	BIPOLAR		100 μA		Tape And Reel	5 V	5 V	Small Outline	SOP14,.25	Comparators	36 V	0.05 in (1.27 mm)	85 °C (185 °F)	25 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.341 in (8.65 mm)
LT1016IS8#TRPBF	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-7 V	3.5 mV	13 uA	Yes	1	BIPOLAR		35 mA	-5 V	Tape And Reel	5 V		Small Outline	SOP8,.24	Comparators	7 V	0.05 in (1.27 mm)	85 °C (185 °F)		10 ns		-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.752 mm)	0.154 in (3.899 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9025 mm)
LT6703HVCS5-2#TRPBF	Analog Devices	Comparator	Industrial	Gull Wing	5	VSSOP	Rectangular	Plastic/Epoxy			10 nA	Yes	1					Tape And Reel	5 V		Small Outline, Very Thin Profile, Shrink Pitch		Comparators	18.5 V	0.037 in (0.95 mm)	85 °C (185 °F)		29 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.039 in (1 mm)	0.064 in (1.625 mm)	No	e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
LT6703IDC-2#PBF	Analog Devices	Comparator	Industrial	No Lead	3	HVSON	Square	Plastic/Epoxy			10 nA	Yes	1						5 V		Small Outline, Heat Sink/Slug, Very Thin Profile		Comparators	18.5 V	0.02 in (0.5 mm)	85 °C (185 °F)		29 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin - annealed	Dual	S-PDSO-N3	1	0.031 in (0.8 mm)	0.079 in (2 mm)	No	e3	30 s	260 °C (500 °F)	0.079 in (2 mm)
MAX9203ESA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V	7.5 mV	1.5 nA	Yes	1	BIPOLAR			-5 V		5 V	±5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	5 uA	7 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX9203ESA+	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V	7.5 mV	7 uA	Yes	1	BIPOLAR			-5 V		5 V	±5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	5 uA	7 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
MCP6546T-I/LT	Microchip Technology	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		7 mV	100 pA	Yes	1	CMOS	TS 16949	1 μA		Tape And Reel	5 V	1.6/5.5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)		3 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e3	40	260 °C (500 °F)	0.079 in (2 mm)
HMC875LC3C	Analog Devices	Comparator	Industrial	No Lead	16	HQCCN	Square					Yes	1				-3 V		3.3 V		Chip Carrier, Heat Sink/Slug		Comparators	4 V	0.02 in (0.5 mm)	85 °C (185 °F)			Push-Pull	-40 °C (-40 °F)	Gold Over Nickel	Quad	S-XQCC-N16		0.052 in (1.31 mm)	0.118 in (3 mm)	No	e4			0.118 in (3 mm)
LM393BIDDFR	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		2.5 mV	25 nA	Yes	2	BIPOLAR		800 μA		Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.1		38 V	0.026 in (0.65 mm)	85 °C (185 °F)	25 nA	1 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.043 in (1.1 mm)	0.063 in (1.6 mm)		e4	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
LMC6772BIN/NOPB	Texas Instruments	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	0 V	5 mV	0.4 pA	No	2	CMOS		10 μA	0 V	Tube	5 V	2.7/15 V	In-Line	DIP8,.3	Comparators	16 V	0.1 in (2.54 mm)	85 °C (185 °F)		4 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	R-PDIP-T8	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e3			0.386 in (9.817 mm)
LT6700IDCB-1#TRMPBF	Analog Devices	Comparator	Industrial	No Lead	6	HVSON	Rectangular	Plastic/Epoxy			15 nA	Yes	2					Tape And Reel	5 V		Small Outline, Heat Sink/Slug, Very Thin Profile		Comparators	18.5 V	0.02 in (0.5 mm)	85 °C (185 °F)		29 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-N6	1	0.031 in (0.8 mm)	0.079 in (2 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
LT6703CDC-3#PBF	Analog Devices	Comparator	Industrial	No Lead	3	HVSON	Square	Plastic/Epoxy			10 nA	Yes	1						5 V		Small Outline, Heat Sink/Slug, Very Thin Profile		Comparators	18.5 V	0.02 in (0.5 mm)	85 °C (185 °F)		29 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin - annealed	Dual	S-PDSO-N3	1	0.031 in (0.8 mm)	0.079 in (2 mm)	No	e3	30 s	260 °C (500 °F)	0.079 in (2 mm)
MAX987EXK-T	Maxim Integrated	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	7 mV	10 nA	Yes	1	BIPOLAR		96 μA	0 V		2.7 V	±1.5/±2.5/3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)		210 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e0			0.079 in (2 mm)
MAX987EXK+T	Analog Devices	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	7 mV	10 nA	Yes	1			96 μA	0 V		2.7 V	±1.5/±2.5/3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	10 nA	210 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e3	30 s	260 °C (500 °F)	0.079 in (2 mm)
MCP6541UT-I/LT	Microchip Technology	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		7 mV	1 pA	Yes	1	CMOS		1 μA		Tape And Reel	5 V	1.6/5.5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)		4 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e3	40	260 °C (500 °F)	0.079 in (2 mm)
NCS2200SQ2T2G	Onsemi	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	8 mV	10 nA	Yes	1	CMOS		17 μA	0 V	Tape And Reel	3 V	1/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	105 °C (221 °F)		1.1 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e3	40	260 °C (500 °F)	0.079 in (2 mm)
NCX2202GM,115	NXP Semiconductors	Comparator	Industrial	No Lead	6	VSON	Rectangular	Plastic/Epoxy		30 mV		Yes	1			9 μA		Tape And Reel, 7 Inch	1.6 V	1.6/5.5 V	Small Outline, Very Think Profile	SOLCC6,.04,20	Comparators	7 V	0.02 in (0.5 mm)	85 °C (185 °F)		800 ns	Open-Drain	-40 °C (-40 °F)	Tin	Dual	R-PDSO-N6	1	0.02 in (0.5 mm)	0.039 in (1 mm)	No	e3	30 s	260 °C (500 °F)	0.057 in (1.45 mm)
TLC339IPWR	Texas Instruments	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		7 mV	2 nA	Yes	4	CMOS		80 μA		Tape And Reel	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	85 °C (185 °F)	2 pA	2.5 µs	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4		260 °C (500 °F)	0.197 in (5 mm)
TLC3704ID	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	-18 V	7 mV	2 nA	Yes	4	CMOS		80 μA		Tube	5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	30 pA	2.7 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.341 in (8.65 mm)
TLC3704IN	Texas Instruments	Comparator	Industrial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy	-18 V	7 mV	2 nA	No	4	CMOS		80 μA		Tube	5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	85 °C (185 °F)	30 pA	2.7 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e4			0.76 in (19.305 mm)
TLC374IDR	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		7 mV	2 nA	Yes	4	CMOS		600 μA		Tape And Reel	5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	30 pA	650 ns	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.341 in (8.65 mm)
TLV2352IPWRG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		7 mV	2 nA	Yes	2	CMOS		400 μA			3 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	8 V	0.026 in (0.65 mm)	85 °C (185 °F)	2 nA	640 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
LM211PE4	Texas Instruments	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-18 V	4 mV	150 nA	No	1	BIPOLAR		6 mA	-15 V	Tube	15 V	±15 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	85 °C (185 °F)	100 nA	115 ns	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e4			0.378 in (9.59 mm)
LMC6772AIMMX	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	0 V	8 mV		Yes	2	CMOS		25 μA	0 V		5 V	2.7/15 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	16 V	0.026 in (0.65 mm)	85 °C (185 °F)		4 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0		260 °C (500 °F)	0.118 in (3 mm)
LT1711IMS8#TR	Analog Devices	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	-6.3 V	6 mV	10 uA	Yes	1				-5 V	Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	6.3 V	0.026 in (0.65 mm)	85 °C (185 °F)		5.5 ns		-40 °C (-40 °F)	Tin/Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0			0.118 in (3 mm)
LT1719IS8#TR	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V	3.5 mV	0 uA	Yes	1	BIPOLAR			-5 V	Tape And Reel	5 V		Small Outline		Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)		7 ns	Open-Emitter	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.752 mm)	0.154 in (3.899 mm)	No	e0			0.193 in (4.9025 mm)
MAX9053BEUB+T	Maxim Integrated	Comparator	Industrial	Gull Wing	10	TSSOP	Square	Plastic/Epoxy		9 mV	25 nA	Yes	2	BIPOLAR		130 μA			5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP10,.19,20	Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)	25 nA	400 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-G10	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX9053BEUB-T	Maxim Integrated	Comparator	Industrial	Gull Wing	10	TSSOP	Square	Plastic/Epoxy		9 mV	25 nA	Yes	2	BIPOLAR		130 μA			5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP10,.19,20	Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)	25 nA	450 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G10	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0			0.118 in (3 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.