Industrial Comparators 2,400+

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
LMC7215IM5X	Texas Instruments	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy	0 V	8 mV	1 nA	Yes	1	CMOS		1 μA	0 V	Tape And Reel	2.7 V	2.7/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	10 V	0.038 in (0.953 mm)	85 °C (185 °F)	0.05 pA	17 µs	Push-Pull	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G5	1	0.048 in (1.22 mm)	0.063 in (1.6 mm)	No	e0		260 °C (500 °F)	0.115 in (2.92 mm)
LMV7239M5X	Texas Instruments	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	8 mV	600 nA	Yes	1	BIPOLAR		95 μA	0 V	Tape And Reel	2.7 V	2.7/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.038 in (0.953 mm)	85 °C (185 °F)	400 nA	68 ns	Push-Pull	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G5	1	0.047 in (1.19 mm)	0.063 in (1.6 mm)	No	e0		260 °C (500 °F)	0.115 in (2.92 mm)
LTC1540IDD#TRPBF	Analog Devices	Comparator	Industrial	No Lead	8	VSON	Square	Plastic/Epoxy	0 V	15 mV		Yes	1				0 V	Tape And Reel	3 V		Small Outline, Very Think Profile		Comparators	12 V	0.02 in (0.5 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-N8	1	0.033 in (0.85 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
LMC7221BIMX/NOPB	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	18 mV	0.04 pA	Yes	1	CMOS		14 μA	0 V	Tape And Reel	5 V	2.7/15 V	Small Outline	SOP8,.25	Comparators	16 V	0.05 in (1.27 mm)	85 °C (185 °F)	0.4 pA	7 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.753 mm)	0.154 in (3.899 mm)	No	e3		260 °C (500 °F)	0.193 in (4.902 mm)
LMV7271MF/NOPB	Texas Instruments	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy	0 V	4 mV	100 nA	Yes	1	BICMOS		14 μA	0 V	Tape And Reel	1.8 V	1.8/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	85 °C (185 °F)	100 nA	1.8 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.048 in (1.22 mm)	0.063 in (1.6 mm)	No	e3		260 °C (500 °F)	0.115 in (2.92 mm)
ADCMP573BCPZ-RL7	Analog Devices	Comparator	Industrial	No Lead	16	HVQCCN	Square			5 mV		Yes	1	BIPOLAR		80 mA			3.3 V	3.3/5 V	Chip Carrier, Heat Sink/Slug, Very Thin Profile	LCC16,.12SQ,20	Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)	50 uA	0.165 ns		-40 °C (-40 °F)	Matte Tin	Quad	S-XQCC-N16	3	0.039 in (1 mm)	0.118 in (3 mm)	No	e3		260 °C (500 °F)	0.118 in (3 mm)
LMC7211BIM5X	Texas Instruments	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy	0 V	18 mV	0.4 pA	Yes	1	CMOS		12 μA	0 V	Tape And Reel	5 V	2.7/15 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	16 V	0.037 in (0.95 mm)	85 °C (185 °F)	0.4 pA	4 µs	Push-Pull	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)	No	e0		260 °C (500 °F)	0.114 in (2.9 mm)
LT1719IS6#TRM	Analog Devices	Comparator	Industrial	Gull Wing	6	VSSOP	Rectangular	Plastic/Epoxy		3.5 mV	0 uA	Yes	1	BIPOLAR				Tape And Reel	5 V		Small Outline, Very Thin Profile, Shrink Pitch		Comparators	7 V	0.037 in (0.95 mm)	85 °C (185 °F)		7 ns	Open-Collector	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G6	1	0.039 in (1 mm)	0.064 in (1.625 mm)	No	e0			0.114 in (2.9 mm)
TLC393IDRG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		5 mV	2 nA	Yes	2	CMOS		40 μA		Tape And Reel	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	2 pA	2.5 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
AD8561ARUZ-REEL	Analog Devices	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy	-7 V	8 mV		Yes	1	BIPOLAR			-5 V	Tape And Reel	5 V	3/5/±5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)		7 ns		-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
LM2901DTBR2	Onsemi	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy	0 V	15 mV	500 nA	Yes	4	BIPOLAR		2 mA	0 V		5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	36 V	0.026 in (0.65 mm)	105 °C (221 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4		260 °C (500 °F)	0.197 in (5 mm)
LT1715IMS#PBF	Analog Devices	Comparator	Industrial	Gull Wing	10	HTSSOP	Square	Plastic/Epoxy	-7 V	3.5 mV	-6 uA	Yes	2	BIPOLAR			-5 V		5 V		Small Outline		Comparators	7 V	0.02 in (0.5 mm)	85 °C (185 °F)			Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-G10	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MIC842NYC5	Microchip Technology	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy				Yes	1						1.6 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)		12 µs	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e4			0.079 in (2 mm)
NCS2220AMUT1G	Onsemi	Comparator	Industrial	No Lead	8	HVSON	Square	Plastic/Epoxy		8 mV		Yes	2	CMOS		17 μA			3 V	1/5 V	Small Outline, Heat Sink/Slug, Very Thin Profile	SOLCC8,.06,16	Comparators	6 V	0.016 in (0.4 mm)	105 °C (221 °F)		500 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-N8	1	0.022 in (0.55 mm)	0.063 in (1.6 mm)	No	e3	30 s	260 °C (500 °F)	0.063 in (1.6 mm)
NJM12903RB1	New Japan Radio	Comparator	Industrial	Gull Wing	8	VSSOP	Rectangular	Plastic/Epoxy		4 mV	200 nA	Yes	2	BIPOLAR					5 V		Small Outline, Very Thin Profile, Shrink Pitch		Comparators	15 V	0.026 in (0.65 mm)	85 °C (185 °F)		500 ns	Open-Collector	-40 °C (-40 °F)	Tin Bismuth	Dual	R-PDSO-G8		0.039 in (1 mm)	0.11 in (2.8 mm)	No	e6			0.114 in (2.9 mm)
MAX964EEE	Maxim Integrated	Comparator	Industrial	Gull Wing	16	SSOP	Rectangular	Plastic/Epoxy		2 mV	15 uA	Yes	4	CMOS		36 mA			3 V	3/5 V	Small Outline, Shrink Pitch	SSOP16,.25	Comparators	5.5 V	0.025 in (0.635 mm)	85 °C (185 °F)	15 uA	4.5 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	240 °C (464 °F)	0.193 in (4.89 mm)
MAX964EEE+	Analog Devices	Comparator	Industrial	Gull Wing	16	SSOP	Rectangular	Plastic/Epoxy		2 mV	15 uA	Yes	4	CMOS		36 mA			3 V	3/5 V	Small Outline, Shrink Pitch	SSOP16,.25	Comparators	5.5 V	0.025 in (0.635 mm)	85 °C (185 °F)	15 uA	4.5 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
MAX9691ESA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V	11.5 mV	30 uA	Yes	1			36 mA	-5.2 V		5 V	5,-5.2 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	20 uA	2 ns	Open-Emitter	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX9691ESA+T	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V	11.5 mV	30 uA	Yes	1			36 mA	-5.2 V		5 V	5,-5.2 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	20 uA	2 ns	Open-Emitter	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
NJM12903R	New Japan Radio	Comparator	Industrial	Gull Wing	8	LSSOP	Rectangular	Plastic/Epoxy		4 mV	200 nA	Yes	2	BIPOLAR		1 mA			5 V	5 V	Small Outline, Low Profile, Shrink Pitch	TSSOP8,.16	Comparators	15 V	0.026 in (0.65 mm)	85 °C (185 °F)	200 nA	500 ns	Open-Collector	-40 °C (-40 °F)	Tin Bismuth	Dual	R-PDSO-G8		0.055 in (1.4 mm)	0.11 in (2.8 mm)	No	e6			0.114 in (2.9 mm)
TLV3012AIDCKTG4	Texas Instruments	Comparator	Industrial	Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy		12 mV	10 pA	Yes	1	CMOS		5 μA			5 V	2/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)	10 pA	12 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G6	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e4	30 s	260 °C (500 °F)	0.079 in (2 mm)
LMV393MM	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		7 mV	250 nA	Yes	2	BICMOS		100 μA	0 V	Tape And Reel	2.7 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	250 nA	450 ns	Open-Collector	-40 °C (-40 °F)	Tin/Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0	40	260 °C (500 °F)	0.118 in (3 mm)
LT6703CDC-2#TRMPBF	Analog Devices	Comparator	Industrial	No Lead	3	HVSON	Square	Plastic/Epoxy			10 nA	Yes	1					Tape And Reel	5 V		Small Outline, Heat Sink/Slug, Very Thin Profile		Comparators	18.5 V	0.02 in (0.5 mm)	85 °C (185 °F)		29 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-N3	1	0.031 in (0.8 mm)	0.079 in (2 mm)	No	e3	30 s	260 °C (500 °F)	0.079 in (2 mm)
MAX921ESA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		Yes	1	CMOS		4 μA			3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)		14 µs		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	240 °C (464 °F)	0.193 in (4.9 mm)
MAX921ESA+	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		10 mV		Yes	1	CMOS		4 μA			3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)		14 µs		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1			No	e3	30 s	260 °C (500 °F)
MAX942ESA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		3 mV	400 nA	Yes	2	BIPOLAR		1.2 mA			3 V	3/5 V	Small Outline	SOP8,.25	Comparators	6.5 V	0.05 in (1.27 mm)	85 °C (185 °F)		80 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	240 °C (464 °F)	0.193 in (4.9 mm)
MAX942ESA+	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		3 mV	400 nA	Yes	2	BIPOLAR		600 μA			3 V	3/5 V	Small Outline	SOP8,.25	Comparators	6.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	400 nA	80 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLC3704IPW	Texas Instruments	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy	-18 V	7 mV	2 nA	Yes	4	CMOS		80 μA		Tube	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	85 °C (185 °F)	30 pA	2.7 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4		260 °C (500 °F)	0.197 in (5 mm)
LMV7235M5X	Texas Instruments	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	8 mV	600 nA	Yes	1	BIPOLAR		95 μA	0 V	Tape And Reel	2.7 V	2.7/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.038 in (0.953 mm)	85 °C (185 °F)	400 nA	68 ns	Open-Drain	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G5	1	0.047 in (1.19 mm)	0.063 in (1.6 mm)	No	e0		260 °C (500 °F)	0.115 in (2.92 mm)
LT1017IS8#TRPBF	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-20 V	1.4 mV	25 nA	Yes	2				0 V	Tape And Reel	4.5 V		Small Outline		Comparators	40 V	0.05 in (1.27 mm)	85 °C (185 °F)			Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.752 mm)	0.154 in (3.899 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9025 mm)
NCS2202SQ2T2G	Onsemi	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	8 mV		Yes	1	CMOS		17 μA	0 V	Tape And Reel	3 V	1/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	105 °C (221 °F)		1.1 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e3	40	260 °C (500 °F)	0.079 in (2 mm)
LM239APT	STMicroelectronics	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		4 mV	300 nA	Yes	4	BIPOLAR		2.5 mA		Tape And Reel	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	32 V	0.026 in (0.65 mm)	105 °C (221 °F)	100 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
LMV331M5X	Texas Instruments	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		7 mV	250 nA	Yes	1	BICMOS		120 μA	0 V	Tape And Reel	2.7 V	3/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	5.5 V	0.037 in (0.95 mm)	85 °C (185 °F)	250 nA	450 ns	Open-Collector	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G5	1	0.048 in (1.22 mm)	0.063 in (1.6 mm)	No	e0		260 °C (500 °F)	0.115 in (2.92 mm)
LMV393IDDURG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	VSSOP	Rectangular	Plastic/Epoxy		9 mV	400 nA	Yes	2	BIPOLAR		300 μA		Tape And Reel	5 V	3/5 V	Small Outline, Very Thin Profile, Shrink Pitch	TSSOP8,.12,20	Comparators	5.5 V	0.02 in (0.5 mm)	85 °C (185 °F)	250 nA	600 ns	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.035 in (0.9 mm)	0.079 in (2 mm)	No	e4		260 °C (500 °F)	0.091 in (2.3 mm)
AD8611AR	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	7 mV	-4 uA	Yes	1			10 mA	0 V		3 V	3/5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	85 °C (185 °F)		4.5 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0		240 °C (464 °F)	0.193 in (4.9 mm)
AD8611AR-REEL7	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	7 mV	-4 uA	Yes	1			10 mA	0 V	Tape And Reel, 7 Inch	3 V	3/5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	85 °C (185 °F)		4.5 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0		240 °C (464 °F)	0.193 in (4.9 mm)
MAX9119EXK-T	Maxim Integrated	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	10 mV	2 nA	Yes	1			1.2 μA	0 V		5 V	2/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	1 nA	40 µs	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e0		245 °C (473 °F)	0.079 in (2 mm)
MAX9119EXK+T	Analog Devices	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		10 mV	2 nA	Yes	1			1.2 μA			5 V	2/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	1 nA		Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e3	30 s	260 °C (500 °F)	0.079 in (2 mm)
MIC842HYC5-TR	Microchip Technology	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy				Yes	1	CMOS	TS 16949	3 μA		Tape And Reel	1.5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)		12 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e4			0.08 in (2.02 mm)
LMV393MUTAG	Onsemi	Comparator	Industrial	No Lead	8	VSON	Rectangular	Plastic/Epoxy		9 mV		Yes	2	CMOS		250 μA			2.7 V	2.7/5 V	Small Outline, Very Think Profile	SOLCC8,.05,16	Comparators	5.5 V	0.016 in (0.4 mm)	85 °C (185 °F)		200 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-N8	1	0.022 in (0.55 mm)	0.047 in (1.2 mm)	No	e4	30 s	260 °C (500 °F)	0.071 in (1.8 mm)
LMV7235M5	Texas Instruments	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	8 mV	600 nA	Yes	1	BIPOLAR		95 μA	0 V	Tape And Reel	2.7 V	2.7/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.038 in (0.953 mm)	85 °C (185 °F)	400 nA	68 ns	Open-Drain	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G5	1	0.047 in (1.19 mm)	0.063 in (1.6 mm)	No	e0		260 °C (500 °F)	0.115 in (2.92 mm)
LMV7235M7X/NOPB	Texas Instruments	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	8 mV	600 nA	Yes	1	BIPOLAR		95 μA	0 V	Tape And Reel	2.7 V	2.7/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	400 nA	68 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e3	30 s	260 °C (500 °F)	0.079 in (2 mm)
MAX961ESA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		2 mV	15 uA	Yes	1	CMOS		11 mA			3 V	3/5 V	Small Outline	SOP8,.25	Comparators	5.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	15 uA	4.5 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	240 °C (464 °F)	0.193 in (4.9 mm)
MAX961ESA+	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		2 mV	15 uA	Yes	1	CMOS		11 mA			3 V	3/5 V	Small Outline	SOP8,.25	Comparators	5.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	15 uA	4.5 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
MCP6541RT-I/OT	Microchip Technology	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		7 mV	100 pA	Yes	1	CMOS		1 μA		Tape And Reel	5 V	1.8/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	7 V	0.037 in (0.95 mm)	85 °C (185 °F)		4 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)	No	e3		260 °C (500 °F)	0.114 in (2.9 mm)
ADCMP572BCPZ-WP	Analog Devices	Comparator	Industrial	No Lead	16	HVQCCN	Square			5 mV		Yes	1	BIPOLAR		52 mA			3.3 V	3.3/5 V	Chip Carrier, Heat Sink/Slug, Very Thin Profile	LCC16,.12SQ,20	Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)	50 uA	0.165 ns		-40 °C (-40 °F)	Matte Tin	Quad	S-XQCC-N16	3	0.039 in (1 mm)	0.118 in (3 mm)	No	e3		260 °C (500 °F)	0.118 in (3 mm)
LMV7235M7/NOPB	Texas Instruments	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	8 mV	600 nA	Yes	1	BIPOLAR		95 μA	0 V	Tape And Reel	2.7 V	2.7/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	400 nA	68 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e3		260 °C (500 °F)	0.079 in (2 mm)
LT1715IMS#TRPBF	Analog Devices	Comparator	Industrial	Gull Wing	10	HTSSOP	Square	Plastic/Epoxy	-7 V	3.5 mV	-6 uA	Yes	2	BIPOLAR			-5 V	Tape And Reel	5 V		Small Outline		Comparators	7 V	0.02 in (0.5 mm)	85 °C (185 °F)			Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-G10	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.