Industrial Comparators 2,400+

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
MAX999EUK	Maxim Integrated	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		4.5 mV	30 uA	Yes	1			6.5 mA			3 V	3/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	5.5 V	0.037 in (0.95 mm)	85 °C (185 °F)	30 uA	4.5 ns		-40 °C (-40 °F)		Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No		20 s	240 °C (464 °F)	0.114 in (2.9 mm)
MAX999EUK+	Analog Devices	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		4.5 mV	30 uA	Yes	1			6.5 mA			3 V	3/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	5.5 V	0.037 in (0.95 mm)	85 °C (185 °F)	30 uA	4.5 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
MCP6549-I/ST	Microchip Technology	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		7 mV	100 pA	Yes	4	CMOS	TS 16949	4 μA		Tube	5 V	1.6/5.5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)		3 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e3	40	260 °C (500 °F)	0.197 in (5 mm)
MIC841NYC5-TR	Microchip Technology	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy				Yes	1	CMOS	TS 16949	3 μA		Tape And Reel	1.5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)		12 µs	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e4		260 °C (500 °F)	0.08 in (2.02 mm)
TL3016IDRG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-7 V	3 mV	10 uA	Yes	1	BIPOLAR		12.5 mA	-5 V	Tape And Reel	5 V	5/±5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	85 °C (185 °F)	10 uA	7.8 µs		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
LM211PWE4	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy	-18 V	4 mV	150 nA	Yes	1	BIPOLAR		7.5 mA	-15 V		15 V	±15 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	85 °C (185 °F)	100 nA	115 ns	Open-Collector, Open-Emitter	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
LM211PWG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy	-18 V	4 mV	150 nA	Yes	1	BIPOLAR		7.5 mA	-15 V		15 V	±15 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	85 °C (185 °F)	100 nA	115 ns	Open-Collector, Open-Emitter	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
LMC7225IM5X/NOPB	Texas Instruments	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy	0 V	8 mV	1 nA	Yes	1	CMOS		1 μA	0 V	Tape And Reel	2.7 V	2.7/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	10 V	0.038 in (0.953 mm)	85 °C (185 °F)	0.05 pA	22 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.048 in (1.22 mm)	0.063 in (1.6 mm)	No	e3		260 °C (500 °F)	0.115 in (2.92 mm)
LP2901DRG4	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		9 mV	40 nA	Yes	4	BIPOLAR		100 μA		Tape And Reel	5 V	5 V	Small Outline	SOP14,.25	Comparators	36 V	0.05 in (1.27 mm)	85 °C (185 °F)	25 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.341 in (8.65 mm)
LT1011AIS8#TR	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-18 V	1 mV	25 nA	Yes	1	BIPOLAR			-15 V	Tape And Reel	15 V		Small Outline		Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)		150 ns	Open-Collector	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MIC7211YM5-TR	Microchip Technology	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		10 mV		Yes	1	CMOS		14 μA		Tape And Reel	2.7 V		Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	12 V	0.037 in (0.95 mm)	85 °C (185 °F)		75 ns	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)	No	e4	40	260 °C (500 °F)	0.114 in (2.9 mm)
TLC352IPWR	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy	0 V	5 mV	2 nA	Yes	2	CMOS		300 μA	0 V	Tape And Reel	5 V	1.5/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	85 °C (185 °F)	20 nA	650 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
LMV7275MF/NOPB	Texas Instruments	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy	0 V	4 mV	100 nA	Yes	1	BICMOS		14 μA	0 V	Tape And Reel	1.8 V	1.8/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	5.5 V	0.037 in (0.95 mm)	85 °C (185 °F)	100 nA	1.8 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.048 in (1.22 mm)	0.063 in (1.6 mm)	No	e3		260 °C (500 °F)	0.115 in (2.92 mm)
TLC3704IPWRG4	Texas Instruments	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy	-18 V	7 mV	2 nA	Yes	4	CMOS		125 μA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	85 °C (185 °F)		2.7 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
MCP6549-I/SL	Microchip Technology	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		7 mV	100 pA	Yes	4	CMOS	TS 16949	4 μA		Tube	5 V	1.6/5.5 V	Small Outline	SOP14,.25	Comparators	7 V	0.05 in (1.27 mm)	85 °C (185 °F)		3 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	40	260 °C (500 °F)	0.341 in (8.65 mm)
MIC842LYC5-TR	Microchip Technology	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy				Yes	1	CMOS	TS 16949	3 μA		Tape And Reel	1.5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)		12 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e4	40	260 °C (500 °F)	0.08 in (2.02 mm)
AD8611AR-REEL	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	7 mV	-4 uA	Yes	1			10 mA	0 V	Tape And Reel	3 V	3/5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	85 °C (185 °F)		4.5 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0		240 °C (464 °F)	0.193 in (4.9 mm)
LT1716CS5#TRM	Analog Devices	Comparator	Industrial	Gull Wing	5	VSSOP	Rectangular	Plastic/Epoxy	-22 V	2.4 mV	1.4 mA	Yes	1	BIPOLAR			-15 V	Tape And Reel	15 V		Small Outline, Very Thin Profile, Shrink Pitch		Comparators	22 V	0.037 in (0.95 mm)	85 °C (185 °F)		5.5 µs	Open-Collector	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G5	1	0.039 in (1 mm)	0.064 in (1.625 mm)	No	e0			0.114 in (2.9 mm)
TL3016IPWRG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy	-7 V	3 mV	10 uA	Yes	1	BIPOLAR		12.5 mA	-5 V	Tape And Reel	5 V	±5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)	10 uA	7.8 µs		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
TL331KDBVTG4	Texas Instruments	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		9 mV	-400 nA	Yes	1	BIPOLAR		700 μA			5 V	5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	36 V	0.037 in (0.95 mm)	105 °C (221 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)	No	e4	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
TS862IDT	STMicroelectronics	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		18 mV	600 pA	Yes	2	BICMOS		16 μA		Tape And Reel	5 V	2.7/10 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 pA	2 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4			0.193 in (4.9 mm)
LT1671IS8#PBF	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-7 V	4 mV	350 nA	Yes	1				-5 V		5 V		Small Outline		Comparators	7 V	0.05 in (1.27 mm)	85 °C (185 °F)		85 ns		-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
LT1716CS5#TR	Analog Devices	Comparator	Industrial	Gull Wing	5	VSSOP	Rectangular	Plastic/Epoxy	-22 V	2.4 mV	1.4 mA	Yes	1	BIPOLAR			-15 V	Tape And Reel	15 V		Small Outline, Very Thin Profile, Shrink Pitch		Comparators	22 V	0.037 in (0.95 mm)	85 °C (185 °F)		5.5 µs	Open-Collector	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G5	1	0.039 in (1 mm)	0.064 in (1.625 mm)	No	e0			0.114 in (2.9 mm)
LT6700IS6-3#TRMPBF	Analog Devices	Comparator	Industrial	Gull Wing	6	VSSOP	Rectangular	Plastic/Epoxy			15 nA	Yes	2					Tape And Reel	5 V		Small Outline, Very Thin Profile, Shrink Pitch		Comparators	18.5 V	0.037 in (0.95 mm)	85 °C (185 °F)		29 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G6	1	0.039 in (1 mm)	0.064 in (1.625 mm)	No	e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
LTC1540IDD#PBF	Analog Devices	Comparator	Industrial	No Lead	8	HVSON	Square	Plastic/Epoxy	0 V	15 mV		Yes	1	CMOS			0 V		3 V		Small Outline, Heat Sink/Slug, Very Thin Profile		Comparators	12 V	0.02 in (0.5 mm)	85 °C (185 °F)		70 µs		-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-N8	1	0.033 in (0.85 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX912ESE-T	Maxim Integrated	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-7 V	3 mV	8 uA	Yes	2	BIPOLAR		10 mA	-5 V		5 V	5/±5 V	Small Outline	SOP16,.25	Comparators	7 V	0.05 in (1.27 mm)	85 °C (185 °F)	5 uA	10 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.39 in (9.9 mm)
MAX912ESE+T	Analog Devices	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-7 V	3 mV	8 uA	Yes	2	BIPOLAR		10 mA	-5 V		5 V	5/±5 V	Small Outline	SOP16,.25	Comparators	7 V	0.05 in (1.27 mm)	85 °C (185 °F)	5 uA	10 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.39 in (9.9 mm)
MAX9601EUP	Maxim Integrated	Comparator	Industrial	Gull Wing	20	TSSOP	Rectangular	Plastic/Epoxy	-6 V	9 mV	20 uA	Yes	2	BIPOLAR			-5.2 V		5 V	5,-5.2 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP20,.25	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	20 uA	0.5 ns	Open-Emitter	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G20	1	0.043 in (1.1 mm)	0.173 in (4.4 mm)	No	e0			0.256 in (6.5 mm)
MAX9601EUP+	Analog Devices	Comparator	Industrial	Gull Wing	20	TSSOP	Rectangular	Plastic/Epoxy	-6 V	9 mV	20 uA	Yes	2	BIPOLAR			-5.2 V		5 V		Small Outline, Thin Profile, Shrink Pitch			6 V	0.026 in (0.65 mm)	85 °C (185 °F)			Open-Emitter	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G20	1	0.043 in (1.1 mm)	0.173 in (4.4 mm)	No	e3	30 s	260 °C (500 °F)	0.256 in (6.5 mm)
MCP6546-I/SN	Microchip Technology	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		7 mV	100 pA	Yes	1	CMOS	TS 16949	1 μA		Tube	5 V	1.6/5.5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	85 °C (185 °F)		3 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
NCX2220DP,125	NXP Semiconductors	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		30 mV		Yes	2			7 μA		Tape And Reel, 7 Inch		1.6/5.5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.16	Comparators		0.025 in (0.635 mm)	85 °C (185 °F)				-40 °C (-40 °F)		Dual	R-PDSO-G8	1			No		30 s	260 °C (500 °F)
TLC3702IPW	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		7 mV	2 nA	Yes	2	CMOS		40 μA		Tube	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	85 °C (185 °F)	30 pA	2.7 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4		260 °C (500 °F)	0.173 in (4.4 mm)
NCS2200SN1T1G	Onsemi	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	8 mV	10 nA	Yes	1	CMOS		17 μA	0 V	Tape And Reel	3 V	1/5 V	Small Outline, Thin Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	105 °C (221 °F)		1.1 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.059 in (1.5 mm)	No	e3	40	260 °C (500 °F)	0.118 in (3 mm)
AD8611ARM-R2	Analog Devices	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy	0 V	7 mV	-4 uA	Yes	1			10 mA	0 V		3 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)		4.5 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0		240 °C (464 °F)	0.118 in (3 mm)
AD8611ARM-REEL	Analog Devices	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	0 V	7 mV	-4 uA	Yes	1			10 mA	0 V	Tape And Reel	3 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)		4.5 ns		-40 °C (-40 °F)	Tin/Lead (Sn85Pb15)	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0		240 °C (464 °F)	0.118 in (3 mm)
LMV339MX/NOPB	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		7 mV	250 nA	Yes	4	BICMOS		300 μA	0 V	Tape And Reel	2.7 V	3/5 V	Small Outline	SOP14,.25	Comparators	5.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	250 nA	450 ns	Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3		260 °C (500 °F)	0.341 in (8.65 mm)
LMV393MMX	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		7 mV	250 nA	Yes	2	BICMOS		250 μA	0 V		2.7 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	250 nA	450 ns	Open-Collector	-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0		260 °C (500 °F)	0.118 in (3 mm)
LMV393MX	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		7 mV	250 nA	Yes	2	BICMOS		100 μA	0 V	Tape And Reel	2.7 V	3/5 V	Small Outline	SOP8,.25	Comparators	5.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	250 nA	450 ns	Open-Collector	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0		235 °C (455 °F)	0.193 in (4.9 mm)
LMV7272TL/NOPB	Texas Instruments	Comparator	Industrial	Ball	8	VFBGA	Square	Plastic/Epoxy	0 V	4 mV	100 nA	Yes	1	BICMOS		28 μA	0 V	Tape And Reel	1.8 V	1.8/5 V	Grid Array, Very Thin Profile, Fine Pitch	BGA8,3X3,20	Comparators	5.5 V	0.02 in (0.5 mm)	85 °C (185 °F)	100 nA	1.8 µs	Push-Pull	-40 °C (-40 °F)	Tin/Silver/Copper	Bottom	S-PBGA-B8	1	0.024 in (0.6 mm)	0.06 in (1.514 mm)	No	e1		260 °C (500 °F)	0.06 in (1.514 mm)
LT6700IDCB-3#TRMPBF	Analog Devices	Comparator	Industrial	No Lead	6	HVSON	Rectangular	Plastic/Epoxy			15 nA	Yes	2					Tape And Reel	5 V		Small Outline, Heat Sink/Slug, Very Thin Profile		Comparators	18.5 V	0.02 in (0.5 mm)	85 °C (185 °F)		29 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-N6	1	0.031 in (0.8 mm)	0.079 in (2 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
NCV2200SN2T1G	Onsemi	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		8 mV		Yes	1	CMOS	AEC-Q100	17 μA		Tape And Reel	3 V	1/5 V	Small Outline, Thin Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	105 °C (221 °F)		1.1 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.059 in (1.5 mm)	No	e3			0.118 in (3 mm)
LMC6762AIM/NOPB	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	5 mV	1 pA	Yes	2	CMOS		20 μA	0 V	Tube	5 V	2.7/15 V	Small Outline	SOP8,.25	Comparators	16 V	0.05 in (1.27 mm)	85 °C (185 °F)	0.4 pA	4 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
LMC7215QIM5X/NOPB	Texas Instruments	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		8 mV	0.05 pA	Yes	1	CMOS	AEC-Q100	1 μA		Tape And Reel	5 V	2.7/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	10 V	0.037 in (0.95 mm)	85 °C (185 °F)	0.05 pA	12.2 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)	No	e3		260 °C (500 °F)	0.114 in (2.9 mm)
LMV7235M7X	Texas Instruments	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	8 mV	600 nA	Yes	1	BIPOLAR		110 μA	0 V		2.7 V	2.7/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	600 nA	68 ns	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e0		260 °C (500 °F)	0.079 in (2 mm)
LT1712IGN	Analog Devices	Comparator	Industrial	Gull Wing	16	SSOP	Rectangular	Plastic/Epoxy	-6.3 V	6 mV	10 uA	Yes	2				-5 V		5 V		Small Outline, Shrink Pitch		Comparators	6.3 V	0.025 in (0.635 mm)	85 °C (185 °F)		5.5 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G16	1	0.068 in (1.727 mm)	0.154 in (3.899 mm)	No	e0			0.193 in (4.8895 mm)
LT1719IS6	Analog Devices	Comparator	Industrial	Gull Wing	6	LSSOP	Rectangular	Plastic/Epoxy	0 V	3.5 mV	0 uA	Yes	1	BIPOLAR			0 V		5 V		Small Outline, Low Profile, Shrink Pitch		Comparators	6 V	0.037 in (0.95 mm)	85 °C (185 °F)		7 ns	Open-Emitter	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G6	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e0			0.116 in (2.95 mm)
LT1719IS6#TR	Analog Devices	Comparator	Industrial	Gull Wing	6	VSSOP	Rectangular	Plastic/Epoxy		3.5 mV	0 uA	Yes	1	BIPOLAR				Tape And Reel	5 V		Small Outline, Very Thin Profile, Shrink Pitch		Comparators	7 V	0.037 in (0.95 mm)	85 °C (185 °F)		7 ns	Open-Collector	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G6	1	0.039 in (1 mm)	0.064 in (1.625 mm)	No	e0			0.114 in (2.9 mm)
LT6700IS6-1#TR	Analog Devices	Comparator	Industrial	Gull Wing	6	VSSOP	Rectangular	Plastic/Epoxy			15 nA	Yes	2					Tape And Reel	5 V		Small Outline, Very Thin Profile, Shrink Pitch		Comparators	18.5 V	0.037 in (0.95 mm)	85 °C (185 °F)		29 µs	Open-Collector	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G6	1	0.039 in (1 mm)	0.064 in (1.625 mm)	No	e0	20 s	235 °C (455 °F)	0.114 in (2.9 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.