Industrial Comparators 2,400+

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
MAX919ESA+	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		10 mV	2 nA	Yes	1		1.6 μA			5 V	2/5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	1 nA	95 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
MAX995EUD+T	Analog Devices	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy	0 V	7 mV	10 nA	Yes	4		96 μA	0 V		2.7 V	±1.5/±2.5/3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	10 nA	210 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G14	1	0.043 in (1.1 mm)	0.173 in (4.4 mm)	No	e3	30 s	260 °C (500 °F)	0.197 in (5 mm)
MAX9644EBS+G45	Analog Devices	Comparator	Industrial	Ball	4	VFBGA	Square	Plastic/Epoxy			15 nA	Yes	1	BICMOS	1.1 μA			3.3 V	3.3 V	Grid Array, Very Thin Profile, Fine Pitch	BGA4,2X2,20	Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)	15 nA	15 µs	Open-Drain	-40 °C (-40 °F)	Tin Silver Copper Nickel	Bottom	S-PBGA-B4	1	0.023 in (0.59 mm)	0.039 in (1 mm)	No	e2	30 s	260 °C (500 °F)	0.039 in (1 mm)
MAX9101EUK+	Analog Devices	Comparator	Industrial	Gull Wing	5	SOP	Rectangular	Plastic/Epoxy		20 mV	30 nA	Yes	1	BICMOS				1.2 V		Small Outline		Comparators	6 V		85 °C (185 °F)		4.5 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1				e3	30 s	260 °C (500 °F)
MAX962EUA+T	Analog Devices	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		4.5 mV	30 uA	Yes	2	CMOS	18 mA			3 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	15 uA	4.5 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX9120EXK+	Analog Devices	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		10 mV	2 nA	Yes	1					5 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)		45 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)		e3	30 s	260 °C (500 °F)	0.079 in (2 mm)
MAX967EUA+	Analog Devices	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		15 mV	50 nA	Yes	2	CMOS	16 μA			3 V	1.5/5.5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	50 nA	20 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX9202ESD+	Analog Devices	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	-6 V	7.5 mV	7 uA	Yes	2	BIPOLAR		-5 V		5 V	±5 V	Small Outline	SOP14,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	5 uA	7 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
MAX992ESA+	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	7 mV	10 nA	Yes	2	CMOS	192 μA	0 V		2.7 V	±1.5/±2.5/3/5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	10 nA	210 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
MAX9060EUK+	Analog Devices	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		9 mV	100 nA	Yes	1	BICMOS				1.8 V	1.8 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	85 °C (185 °F)			Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
MAX9020EKA+T	Analog Devices	Comparator	Industrial	Gull Wing	8	LSSOP	Rectangular	Plastic/Epoxy		10 mV	2 nA	Yes	2	BICMOS	2 μA			5 V	5 V	Small Outline, Low Profile, Shrink Pitch	TSSOP8,.1	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	1 nA	31 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
MAX9013EUA+T	Analog Devices	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		5.5 mV	2 uA	Yes	1	BIPOLAR				5 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Matte Tin - annealed	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX907ESA+T	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		3 mV	500 nA	Yes	2	BIPOLAR	1 mA			5 V	5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 nA	45 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
MAX9018AEKA+T	Analog Devices	Comparator	Industrial	Gull Wing	8	LSSOP	Rectangular	Plastic/Epoxy		10 mV	2 nA	Yes	2	BICMOS	2.8 μA			5 V	5 V	Small Outline, Low Profile, Shrink Pitch	TSSOP8,.1	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	1 nA	31 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
MAX924ESE+	Analog Devices	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy		10 mV		Yes	4	CMOS	8.5 μA			3 V	3/5 V	Small Outline	SOP16,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)		14 µs		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G16	1			No	e3	30 s	260 °C (500 °F)
MAX9117EXK+T	Analog Devices	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	10 mV	2 nA	Yes	1		1.3 μA	0 V		5 V	2/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	1 nA	40 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e3	30 s	260 °C (500 °F)	0.079 in (2 mm)
MAX9027EBT+	Analog Devices	Comparator	Industrial	Ball	6	VFBGA	Rectangular	Plastic/Epoxy		10 mV	2 nA	Yes	1	BICMOS				5 V		Grid Array, Very Thin Profile, Fine Pitch		Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)		40 µs	Push-Pull	-40 °C (-40 °F)	Tin Silver Copper	Bottom	R-PBGA-B6	1	0.026 in (0.67 mm)	0.039 in (1 mm)		e1	30 s	260 °C (500 °F)	0.06 in (1.52 mm)
MAX989EKA+T	Analog Devices	Comparator	Industrial	Gull Wing	8	LSSOP	Rectangular	Plastic/Epoxy	0 V	7 mV	10 nA	Yes	2		24 μA	0 V		5 V	±1.5/±2.5/3/5 V	Small Outline, Low Profile, Shrink Pitch	TSSOP8,.1	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	10 nA	450 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
MAX992EKA+T	Analog Devices	Comparator	Industrial	Gull Wing	8	LSSOP	Rectangular	Plastic/Epoxy	0 V	7 mV	10 nA	Yes	2		96 μA	0 V		2.7 V	±1.5/±2.5/3/5 V	Small Outline, Low Profile, Shrink Pitch	TSSOP8,.1	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	10 nA	210 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
MAX9646EBS+TG45	Analog Devices	Comparator	Industrial	Ball	4	VFBGA	Square	Plastic/Epoxy			15 nA	Yes	1	BICMOS				3.3 V		Grid Array, Very Thin Profile, Fine Pitch		Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)		15 µs	Push-Pull	-40 °C (-40 °F)	Tin Silver Copper Nickel	Bottom	S-PBGA-B4	1	0.026 in (0.67 mm)	0.039 in (1 mm)		e2	30 s	260 °C (500 °F)	0.039 in (1 mm)
MAX971ESA+	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	10 mV		Yes	1		3.8 μA	0 V		3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)		300 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1			No	e3	30 s	260 °C (500 °F)
MAX9051BEUT+T	Analog Devices	Comparator	Industrial	Gull Wing	6	LSSOP	Rectangular	Plastic/Epoxy		9 mV	25 nA	Yes	1	CMOS				5 V		Small Outline, Low Profile, Shrink Pitch		Comparators	6 V	0.037 in (0.95 mm)	85 °C (185 °F)		450 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G6		0.057 in (1.45 mm)	0.064 in (1.625 mm)					2.083 in (52.9 mm)
MAX919EUK/V+T	Analog Devices	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		10 mV	2 nA	Yes	1		1.2 μA			5 V	2/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	85 °C (185 °F)	1 nA	95 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
MAX9691EUA+T	Analog Devices	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	-6 V	11.5 mV	30 uA	Yes	1		36 mA	-5.2 V		5 V	5,-5.2 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	20 uA	2 ns	Open-Emitter	-40 °C (-40 °F)	Matte Tin - annealed	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX9692EUB+	Analog Devices	Comparator	Industrial	Gull Wing	10	TSSOP	Square	Plastic/Epoxy	-6 V	11.5 mV	30 uA	Yes	1		36 mA	-5.2 V		5 V	5,-5.2 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP10,.19,20	Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)	20 uA	2 ns	Open-Emitter	-40 °C (-40 °F)	Matte Tin - annealed	Dual	S-PDSO-G10	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX964ESE+	Analog Devices	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy		2 mV	15 uA	Yes	4	CMOS	36 mA			3 V	3/5 V	Small Outline	SOP16,.25	Comparators	5.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	15 uA	4.5 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.39 in (9.9 mm)
MAX988EUK+T	Analog Devices	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy	0 V	7 mV	10 nA	Yes	1		96 μA	0 V		2.7 V	±1.5/±2.5/3/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	85 °C (185 °F)	10 nA	210 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
MAX944ESD+	Analog Devices	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		3 mV	400 nA	Yes	4	BIPOLAR	600 μA			3 V	3/5 V	Small Outline	SOP14,.25	Comparators	6.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	400 nA	80 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
MAX516AENG-T	Analog Devices	Comparator	Industrial	Through-Hole	24	DIP	Rectangular	Plastic/Epoxy			400 nA	No	4	CMOS	10 mA			4.75 V		In-Line			17 V	0.1 in (2.54 mm)	85 °C (185 °F)		800 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T24		0.225 in (5.72 mm)	0.3 in (7.62 mm)	No	e0
MAX9065EBS+G45	Analog Devices	Comparator	Industrial	Ball	4	VFBGA	Square	Plastic/Epoxy				Yes	1	BICMOS	1.35 μA			3.3 V		Grid Array, Very Thin Profile, Fine Pitch	BGA4,2X2,20	Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)		25 µs	Push-Pull	-40 °C (-40 °F)	Tin Silver Copper Nickel	Bottom	S-PBGA-B4	1	0.026 in (0.67 mm)	0.039 in (1 mm)		e2	30 s	260 °C (500 °F)	0.039 in (1 mm)
MAX984ESE+T	Analog Devices	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	0 V	10 mV		Yes	4		8 μA	0 V		3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)		300 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G16	1			No	e3	30 s	260 °C (500 °F)
NCS2301SN2T1	Onsemi	Comparator	Industrial	Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy		7 mV	10 nA	Yes	1	CMOS				6 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSOP6,.11,37	Comparators	12 V	0.037 in (0.95 mm)	105 °C (221 °F)	10 nA	1.75 µs		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G6		0.043 in (1.1 mm)	0.059 in (1.5 mm)	No	e0			0.118 in (3 mm)
NCS2202SQ1T2G	Onsemi	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	8 mV		Yes	1	CMOS	17 μA	0 V	Tape And Reel	3 V	1/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	105 °C (221 °F)		1.1 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e3	40	260 °C (500 °F)	0.079 in (2 mm)
NCS2202SQ2T2	Onsemi	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	8 mV		Yes	1	CMOS		0 V		3 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	6 V	0.026 in (0.65 mm)	105 °C (221 °F)		1.1 µs	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.049 in (1.25 mm)	No				0.079 in (2 mm)
MC3302DG	Onsemi	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		40 mV	1 uA	Yes	4	BIPOLAR	2.5 mA			5 V	5 V	Small Outline	SOP14,.25	Comparators	30 V	0.05 in (1.27 mm)	85 °C (185 °F)	500 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Tin	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	40	260 °C (500 °F)	0.341 in (8.65 mm)
LA6311M	Onsemi	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		7.5 mV		Yes	1	BIPOLAR	5 mA	-15 V		15 V	±15 V	Small Outline	SOP8,.25	Comparators		0.05 in (1.27 mm)	85 °C (185 °F)	220 nA	100 ns		-40 °C (-40 °F)		Dual	R-PDSO-G8				No
NCS2201SN2T1G	Onsemi	Comparator	Industrial	Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy		8 mV	10 nA	Yes	1	CMOS	17 μA			3 V	1/5 V	Small Outline, Thin Profile, Shrink Pitch	TSOP6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	105 °C (221 °F)		1.1 µs		-40 °C (-40 °F)	Tin	Dual	R-PDSO-G6	1	0.043 in (1.1 mm)	0.059 in (1.5 mm)	No	e3		260 °C (500 °F)	0.118 in (3 mm)
KA2901D	Onsemi	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		15 mV	500 nA	Yes	4		2.5 mA			5 V		Small Outline	SOP14,.24	Comparators	36 V	0.05 in (1.27 mm)	85 °C (185 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.071 in (1.8 mm)	0.156 in (3.975 mm)					0.337 in (8.56 mm)
NCS2200SQLT1G	Onsemi	Comparator	Industrial	No Lead	6	VSON	Rectangular		0 V	8 mV	10 nA	Yes	1	CMOS	17 μA	0 V	Tape And Reel	3 V	1/5 V	Small Outline, Very Think Profile	SOLCC6,.08,25	Comparators	6 V	0.026 in (0.65 mm)	105 °C (221 °F)		1.1 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-XDSO-N6	1	0.039 in (1 mm)	0.079 in (2 mm)	No	e3	40	260 °C (500 °F)	0.087 in (2.2 mm)
LM2901SNG	Onsemi	Comparator	Industrial	Pin/Peg	14	DIP	Rectangular	Plastic/Epoxy		7 mV	250 nA	No	4	BIPOLAR	2.5 mA			5 V	5 V	In-Line	DIP14,.3	Comparators	36 V	0.1 in (2.54 mm)	105 °C (221 °F)	250 nA	1 µs	Open-Collector	-40 °C (-40 °F)	Tin	Dual	R-PDIP-P14		0.21 in (5.33 mm)	0.3 in (7.62 mm)	No	e3			0.755 in (19.18 mm)
NCS2203SN2T1	Onsemi	Comparator	Industrial	Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy		8 mV	10 nA	Yes	1	CMOS				3 V	1/5 V	Small Outline, Thin Profile, Shrink Pitch	TSOP6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	105 °C (221 °F)	10 nA	1.1 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G6	1	0.043 in (1.1 mm)	0.059 in (1.5 mm)	No	e0		235 °C (455 °F)	0.118 in (3 mm)
NCS2203SN2T1G	Onsemi	Comparator	Industrial	Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy		8 mV	10 nA	Yes	1	CMOS	17 μA			3 V	1/5 V	Small Outline, Thin Profile, Shrink Pitch	TSOP6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	105 °C (221 °F)		1.1 µs	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G6		0.043 in (1.1 mm)	0.059 in (1.5 mm)	No				0.118 in (3 mm)
NCS2300SN2T1	Onsemi	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		7 mV	10 nA	Yes	1	CMOS				6 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	12 V	0.037 in (0.95 mm)	105 °C (221 °F)	10 nA	1.75 µs		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.059 in (1.5 mm)	No	e0			0.118 in (3 mm)
KA2903DTF	Onsemi	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-18 V	15 mV	500 nA	Yes	2	BIPOLAR	2.5 mA		Tape And Reel	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	250 nA	1.5 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
LM2903AN	Onsemi	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy		15 mV	500 nA	No	1		2.5 mA		Reel	5 V		In-Line	DIP8,.3		36 V	0.1 in (2.54 mm)	105 °C (221 °F)	250 nA	1.5 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDIP-T8		0.21 in (5.33 mm)	0.3 in (7.62 mm)					0.386 in (9.805 mm)
NCS2202SN1T1	Onsemi	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	8 mV	10 nA	Yes	1	CMOS		0 V		3 V	1/5 V	Small Outline, Thin Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	105 °C (221 °F)	10 nA	1.1 µs	Open-Drain	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.059 in (1.5 mm)	No	e0	30 s	235 °C (455 °F)	0.118 in (3 mm)
LMV331MU3TBG	Onsemi	Comparator	Industrial	Butt	8	VFLGA	Square			9 mV		Yes	1	CMOS	150 μA				2.7/5 V	Grid Array, Very Thin Profile, Fine Pitch	LCC8,.06SQ,20	Comparators	5.5 V	0.02 in (0.5 mm)	85 °C (185 °F)		800 ns	Open-Drain	-40 °C (-40 °F)		Bottom	S-XBGA-B8		0.016 in (0.4 mm)	0.059 in (1.5 mm)	No				0.059 in (1.5 mm)
LM2903DMR2	Onsemi	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	0 V	15 mV	500 nA	Yes	2	BIPOLAR	2.5 mA	0 V		5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	36 V	0.026 in (0.65 mm)	105 °C (221 °F)	250 nA	1.5 µs	Open-Collector	-40 °C (-40 °F)	Tin/Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0	30 s	235 °C (455 °F)	0.118 in (3 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.