Industrial Comparators 2,400+

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
TS7221BIYLT	STMicroelectronics	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		18 mV	600 pA	Yes	1	BICMOS		16 μA			5 V	2.7/10 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	12 V	0.037 in (0.95 mm)	85 °C (185 °F)	300 pA	2 µs	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.063 in (1.6 mm)	No				0.114 in (2.9 mm)
TS864ID	STMicroelectronics	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		18 mV	600 pA	Yes	4	BICMOS					5 V	2.7/10 V	Small Outline	SOP14,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 pA	2 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	40	260 °C (500 °F)	0.341 in (8.65 mm)
TS862IAD	STMicroelectronics	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		10 mV	600 pA	Yes	2	BICMOS					5 V		Small Outline		Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)		2 µs	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
TS862AIYDT	STMicroelectronics	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		10 mV	600 pA	Yes	2	BICMOS	AEC-Q100	32 μA			5 V	2.7/10 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 pA	2 µs	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
TS861IYLT	STMicroelectronics	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		18 mV	600 pA	Yes	1	BICMOS	AEC-Q100	16 μA			5 V	2.7/10 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	12 V	0.037 in (0.95 mm)	85 °C (185 °F)	300 pA	2 µs	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.063 in (1.6 mm)	No				0.114 in (2.9 mm)
LM293YDT	STMicroelectronics	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	9 mV	400 nA	Yes	2	BIPOLAR	AEC-Q100	2.5 mA	0 V		5 V	5 V	Small Outline	SOP8,.25	Comparators	36 V	0.05 in (1.27 mm)	105 °C (221 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	40	260 °C (500 °F)	0.193 in (4.9 mm)
TS864AIN	STMicroelectronics	Comparator	Industrial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy		10 mV	600 pA	No	4	BICMOS					5 V	2.7/10 V	In-Line	DIP14,.3	Comparators	12 V	0.1 in (2.54 mm)	85 °C (185 °F)	300 pA	2 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDIP-T14		0.201 in (5.1 mm)	0.3 in (7.62 mm)	No	e3
LM293WYPT	STMicroelectronics	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy	0 V	9 mV	400 nA	Yes	2	BIPOLAR	AEC-Q100	2.5 mA	0 V		5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	36 V	0.026 in (0.65 mm)	105 °C (221 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)	No				0.173 in (4.4 mm)
LMV393IST	STMicroelectronics	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		7 mV	400 nA	Yes	2			150 μA		Tape And Reel	2.7 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	400 nA	550 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
LM293WYDT	STMicroelectronics	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	9 mV	400 nA	Yes	2	BIPOLAR	AEC-Q100	2.5 mA	0 V		5 V	5 V	Small Outline	SOP8,.25	Comparators	36 V	0.05 in (1.27 mm)	105 °C (221 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
TS862AID	STMicroelectronics	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		10 mV	600 pA	Yes	2	BICMOS					5 V	2.7/10 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 pA	2 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4			0.193 in (4.9 mm)
TSM109D	STMicroelectronics	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	9 mV	400 nA	Yes	2			2.5 mA	0 V		5 V	2/36 V	Small Outline	SOP8,.25	Comparators	36 V	0.05 in (1.27 mm)	105 °C (221 °F)	250 nA	1.3 µs		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4			0.193 in (4.9 mm)
TS7221AYILT	STMicroelectronics	Comparator	Industrial	Gull Wing	5	TSOP	Rectangular	Plastic/Epoxy		10 mV		Yes	1	BICMOS		16 μA				2.7/10 V	Small Outline, Thin Profile	TSOP5/6,.11,37	Comparators		0.037 in (0.95 mm)	85 °C (185 °F)	300 pA	4 µs		-40 °C (-40 °F)		Dual	R-PDSO-G5				No
TS7221AIYLT	STMicroelectronics	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		18 mV	600 pA	Yes	1	BICMOS		16 μA			5 V	2.7/10 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	12 V	0.037 in (0.95 mm)	85 °C (185 °F)	300 pA	2 µs	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.063 in (1.6 mm)	No				0.114 in (2.9 mm)
LMV339IPT	STMicroelectronics	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		7 mV	400 nA	Yes	4			150 μA		Tape And Reel	2.7 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	400 nA	550 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
TS862IADT	STMicroelectronics	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		10 mV	600 pA	Yes	2	BICMOS					5 V		Small Outline		Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)		2 µs	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
TSM109IN	STMicroelectronics	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	0 V	9 mV	400 nA	No	2				0 V		5 V		In-Line		Comparators	36 V	0.1 in (2.54 mm)	105 °C (221 °F)		1.3 µs		-40 °C (-40 °F)		Dual	R-PDIP-T8		0.189 in (4.8 mm)	0.3 in (7.62 mm)	No
TSM109N	STMicroelectronics	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	0 V	9 mV	400 nA	No	2			2.5 mA	0 V		5 V	2/36 V	In-Line	DIP8,.3	Comparators	36 V	0.1 in (2.54 mm)	105 °C (221 °F)	250 nA	1.3 µs		-40 °C (-40 °F)	Matte Tin	Dual	R-PDIP-T8		0.189 in (4.8 mm)	0.3 in (7.62 mm)	No	e3
SA5105D	NXP Semiconductors	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-18 V	1.2 mV	1.8 uA	Yes	1			22 mA	-5 V		5 V		Small Outline		Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)		40 ns		-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
NCX2220DP	NXP Semiconductors	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		30 mV		Yes	2						3 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)		800 ns	Push-Pull	-40 °C (-40 °F)		Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)					0.118 in (3 mm)
NCX2222GT	NXP Semiconductors	Comparator	Industrial	Butt	8	VBCC	Rectangular	Plastic/Epoxy		30 mV		Yes	2						3 V		Chip Carrier, Very Thin Profile		Comparators	7 V	0.02 in (0.5 mm)	85 °C (185 °F)		800 ns	Open-Drain	-40 °C (-40 °F)	Tin	Bottom	R-PBCC-B8	1	0.02 in (0.5 mm)	0.039 in (1 mm)		e3			0.079 in (2 mm)
SA5105AD	NXP Semiconductors	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-18 V	750 uV	1.5 uA	Yes	1			19 mA	-5 V		5 V		Small Outline		Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)		40 ns		-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
NCX2200GF3,132	NXP Semiconductors	Comparator	Industrial	No Lead	6	VSON	Square	Plastic/Epoxy		30 mV		Yes	1			9 μA		Tape And Reel, 7 Inch	1.6 V	1.6/5.5 V	Small Outline, Very Think Profile	SOLCC8,.04,14	Comparators	7 V	0.014 in (0.35 mm)	85 °C (185 °F)		800 ns	Push-Pull	-40 °C (-40 °F)	Tin	Dual	S-PDSO-N6	1	0.02 in (0.5 mm)	0.039 in (1 mm)	No	e3	30 s	260 °C (500 °F)	0.039 in (1 mm)
MC3302F	NXP Semiconductors	Comparator	Industrial	Through-Hole	14	DIP	Rectangular	Ceramic, Glass-Sealed		40 mV	1 uA	No	4	BIPOLAR		1.8 mA			5 V		In-Line		Comparators	36 V	0.1 in (2.54 mm)	85 °C (185 °F)		1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.769 in (19.535 mm)
NCX2222GMH	NXP Semiconductors	Comparator	Industrial	No Lead	8	QCCN	Square	Plastic/Epoxy		30 mV		Yes	2			14 μA				1.6/5.5 V	Chip Carrier	LCC8,.06SQ,20	Comparators		0.02 in (0.5 mm)	85 °C (185 °F)				-40 °C (-40 °F)		Quad	S-PQCC-N8	1			No			260 °C (500 °F)
935294081115	NXP Semiconductors	Comparator	Industrial	No Lead	8	VSON	Rectangular	Plastic/Epoxy		30 mV		Yes	1				0 V		3 V		Small Outline, Very Think Profile		Comparators	7 V	0.014 in (0.35 mm)	85 °C (185 °F)		10 ns		-40 °C (-40 °F)	Tin	Dual	R-PDSO-N8		0.02 in (0.5 mm)	0.039 in (1 mm)		e3			0.053 in (1.35 mm)
NCX2200GF3	NXP Semiconductors	Comparator	Industrial	No Lead	6	VSON	Square	Plastic/Epoxy		30 mV		Yes	1						3 V		Small Outline, Very Think Profile		Comparators	7 V	0.014 in (0.35 mm)	85 °C (185 °F)		800 ns		-40 °C (-40 °F)	Pure Tin	Dual	S-PDSO-N6	1	0.02 in (0.5 mm)	0.039 in (1 mm)	No				0.039 in (1 mm)
MC3302D-T	NXP Semiconductors	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	0 V	40 mV	1 uA	Yes	4	BIPOLAR			0 V		5 V		Small Outline			32 V	0.05 in (1.27 mm)	85 °C (185 °F)		1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.341 in (8.65 mm)
NCX2222DP	NXP Semiconductors	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		30 mV		Yes	2						3 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)		800 ns	Open-Drain	-40 °C (-40 °F)		Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)					0.118 in (3 mm)
935294078115	NXP Semiconductors	Comparator	Industrial	No Lead	8	VSON	Rectangular	Plastic/Epoxy		30 mV		Yes	1				0 V		3 V		Small Outline, Very Think Profile		Comparators	7 V	0.02 in (0.5 mm)	85 °C (185 °F)		10 ns		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-N8	1	0.02 in (0.5 mm)	0.039 in (1 mm)		e4	30 s	260 °C (500 °F)	0.077 in (1.95 mm)
NCX2220GM	NXP Semiconductors	Comparator	Industrial	Butt	8	BCC	Square	Plastic/Epoxy		30 mV		Yes	1				0 V		3 V		Chip Carrier			7 V	0.022 in (0.55 mm)	85 °C (185 °F)		10 ns		-40 °C (-40 °F)		Bottom	S-PBCC-B8	1	0.02 in (0.5 mm)	0.063 in (1.6 mm)	No				0.063 in (1.6 mm)
NCX2200GS	NXP Semiconductors	Comparator	Industrial	Butt	6	BCC	Square			30 mV		Yes	1						3 V		Chip Carrier		Comparators	7 V	0.014 in (0.35 mm)	85 °C (185 °F)		800 ns	Push-Pull	-40 °C (-40 °F)		Bottom	S-XBCC-B6		0.014 in (0.35 mm)	0.039 in (1 mm)					0.039 in (1 mm)
SA5105N	NXP Semiconductors	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-18 V	1.2 mV	1.8 uA	No	1			22 mA	-5 V		5 V		In-Line		Comparators	6 V	0.1 in (2.54 mm)	85 °C (185 °F)		40 ns		-40 °C (-40 °F)		Dual	R-PDIP-T8		0.16 in (4.06 mm)	0.3 in (7.62 mm)	No				0.371 in (9.425 mm)
NCX2220GF,115	NXP Semiconductors	Comparator	Industrial	No Lead	8	VSON	Rectangular	Plastic/Epoxy		30 mV		Yes	1			7 μA	0 V		3 V	1.6/5.5 V	Small Outline, Very Think Profile	SOLCC6,.04,14	Comparators	7 V	0.014 in (0.35 mm)	85 °C (185 °F)		10 ns		-40 °C (-40 °F)	Tin	Dual	R-PDSO-N8	1	0.02 in (0.5 mm)	0.039 in (1 mm)	No	e3	30 s	260 °C (500 °F)	0.053 in (1.35 mm)
935294898115	NXP Semiconductors	Comparator	Industrial	No Lead	6	VSON	Rectangular	Plastic/Epoxy		30 mV		Yes	1						1.6 V		Small Outline, Very Think Profile		Comparators	7 V	0.02 in (0.5 mm)	85 °C (185 °F)		800 ns	Open-Drain	-40 °C (-40 °F)	Tin	Dual	R-PDSO-N6		0.02 in (0.5 mm)	0.039 in (1 mm)		e3			0.057 in (1.45 mm)
NCX2220GM,125	NXP Semiconductors	Comparator	Industrial	No Lead	8	SON	Rectangular	Plastic/Epoxy		30 mV		Yes	2			7 μA		Tape And Reel, 7 Inch		1.6/5.5 V	Small Outline	SOLCC8,.05,16	Comparators		0.016 in (0.4 mm)	85 °C (185 °F)				-40 °C (-40 °F)		Dual	R-PDSO-N8	1			No		30 s	260 °C (500 °F)
NCX2220GU,115	NXP Semiconductors	Comparator	Industrial	No Lead	8	HVSON	Rectangular	Plastic/Epoxy		30 mV		Yes	1			7 μA	0 V	Tape And Reel, 7 Inch	3 V	1.6/5.5 V	Small Outline, Heat Sink/Slug, Very Thin Profile	LCC8,.06SQ,20	Comparators	7 V	0.016 in (0.4 mm)	85 °C (185 °F)		10 ns		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-N8	1	0.02 in (0.5 mm)	0.053 in (1.35 mm)	No	e4	30 s	260 °C (500 °F)	0.067 in (1.7 mm)
NCX2200GM	NXP Semiconductors	Comparator	Industrial	No Lead	6	VSON	Rectangular	Plastic/Epoxy		30 mV		Yes	1						3 V		Small Outline, Very Think Profile		Comparators	7 V	0.02 in (0.5 mm)	85 °C (185 °F)		800 ns		-40 °C (-40 °F)	Pure Tin	Dual	R-PDSO-N6	1	0.02 in (0.5 mm)	0.039 in (1 mm)	No				0.057 in (1.45 mm)
933738280623	NXP Semiconductors	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		40 mV	1 uA	Yes	4	BIPOLAR					5 V		Small Outline			36 V	0.05 in (1.27 mm)	85 °C (185 °F)		1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4			0.341 in (8.65 mm)
NCX2220GF	NXP Semiconductors	Comparator	Industrial	No Lead	8	VSON	Rectangular	Plastic/Epoxy		30 mV		Yes	1				0 V		3 V		Small Outline, Very Think Profile		Comparators	7 V	0.014 in (0.35 mm)	85 °C (185 °F)		10 ns		-40 °C (-40 °F)	Tin	Dual	R-PDSO-N8	1	0.02 in (0.5 mm)	0.039 in (1 mm)	No	e3			0.053 in (1.35 mm)
935294048115	NXP Semiconductors	Comparator	Industrial	No Lead	6	VSON	Rectangular	Plastic/Epoxy		30 mV		Yes	1						3 V		Small Outline, Very Think Profile		Comparators	7 V	0.02 in (0.5 mm)	85 °C (185 °F)		800 ns		-40 °C (-40 °F)	Tin	Dual	R-PDSO-N6		0.02 in (0.5 mm)	0.039 in (1 mm)		e3			0.057 in (1.45 mm)
935294077125	NXP Semiconductors	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		30 mV		Yes	1						3 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)		800 ns		-40 °C (-40 °F)	Tin	Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.049 in (1.25 mm)		e3			0.081 in (2.05 mm)
933298950602	NXP Semiconductors	Comparator	Industrial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy		40 mV	1 uA	No	4	BIPOLAR					5 V		In-Line			36 V	0.1 in (2.54 mm)	85 °C (185 °F)		1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDIP-T14		0.165 in (4.2 mm)	0.3 in (7.62 mm)	No		40	245 °C (473 °F)	0.749 in (19.025 mm)
935296527125	NXP Semiconductors	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		30 mV		Yes	1						1.6 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)		800 ns	Open-Drain	-40 °C (-40 °F)	Tin	Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.049 in (1.25 mm)		e3			0.081 in (2.05 mm)
NCX2220GT,115	NXP Semiconductors	Comparator	Industrial	No Lead	8	VSON	Rectangular	Plastic/Epoxy		30 mV		Yes	1			7 μA	0 V		3 V	1.6/5.5 V	Small Outline, Very Think Profile	SOLCC8,.04,20	Comparators	7 V	0.02 in (0.5 mm)	85 °C (185 °F)		10 ns		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-N8	1	0.02 in (0.5 mm)	0.039 in (1 mm)	No	e4	30 s	260 °C (500 °F)	0.077 in (1.95 mm)
NCX2200GS,125	NXP Semiconductors	Comparator	Industrial	Butt	6	BCC	Square			30 mV		Yes	1						3 V		Chip Carrier		Comparators	7 V	0.014 in (0.35 mm)	85 °C (185 °F)		800 ns	Push-Pull	-40 °C (-40 °F)		Bottom	S-XBCC-B6		0.014 in (0.35 mm)	0.039 in (1 mm)					0.039 in (1 mm)
NCX2222GUX	NXP Semiconductors	Comparator	Industrial	No Lead	8	SON	Rectangular	Plastic/Epoxy		30 mV		Yes	2			14 μA				1.6/5.5 V	Small Outline	SOLCC8,.06,16	Comparators		0.016 in (0.4 mm)	85 °C (185 °F)				-40 °C (-40 °F)		Dual	R-PDSO-N8	1			No			260 °C (500 °F)
MC3302A	NXP Semiconductors	Comparator	Industrial	Through-Hole	14		Rectangular	Plastic/Epoxy		40 mV	1 uA	No	4	BIPOLAR		1.5 mA			15 V		In-Line					85 °C (185 °F)			Open-Collector	-40 °C (-40 °F)		Dual	R-PDIP-T14				No

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.