Gull Wing Comparators 2,400+

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Minimum Isolation Voltage Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Sub-Category Nominal Slow Rate Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Nominal Response Time Output Type Minimum Operating Temperature Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

ADCMP600BKSZ-REEL7

Analog Devices

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

BIPOLAR

Tape And Reel, 7 Inch

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

5 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

LM239DTBR2

Onsemi

Comparator

Other

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

0 V

9 mV

400 nA

Yes

4

BIPOLAR

2 mA

0 V

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

36 V

0.026 in (0.65 mm)

85 °C (185 °F)

250 nA

1.3 µs

Open-Collector

-25 °C (-13 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

260 °C (500 °F)

0.197 in (5 mm)

LMV393IPW

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

2

BIPOLAR

300 μA

Tube

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

600 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.173 in (4.4 mm)

LMV7275MGX/NOPB

Texas Instruments

Comparator

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

0 V

4 mV

100 nA

Yes

1

BICMOS

14 μA

0 V

Tape And Reel

1.8 V

1.8/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

5.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

100 nA

1.8 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e3

260 °C (500 °F)

0.079 in (2 mm)

MAX921ESA-T

Maxim Integrated

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-0.3 V

10 mV

Yes

1

CMOS

4 μA

3 V

±1.25/±5.5/2.5/11 V

Small Outline

SOP8,.25

Comparators

12 V

0.05 in (1.27 mm)

85 °C (185 °F)

14 µs

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.193 in (4.9 mm)

MAX921ESA+T

Analog Devices

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

10 mV

Yes

1

CMOS

4 μA

3 V

±1.25/±5.5/2.5/11 V

Small Outline

SOP8,.25

Comparators

12 V

0.05 in (1.27 mm)

85 °C (185 °F)

14 µs

-40 °C (-40 °F)

Matte Tin - annealed

Dual

R-PDSO-G8

1

No

e3

30 s

260 °C (500 °F)

TLV1704AIPWR

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

5.5 mV

20 uA

Yes

4

BIPOLAR

300 μA

Small Outline, Thin Profile, Shrink Pitch

Comparators

40 V

0.026 in (0.65 mm)

125 °C (257 °F)

15 nA

560 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

LM2903VQPWRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

0 V

7 mV

-500 nA

Yes

2

BIPOLAR

AEC-Q100

1 mA

0 V

Tape And Reel

5 V

5/32 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

50 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.173 in (4.4 mm)

LMP7300MAX/NOPB

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

750 uV

3 nA

Yes

1

16 μA

Tape And Reel

2.7/12 V

Small Outline

TSSOP8,.19

Comparators

0.05 in (1.27 mm)

125 °C (257 °F)

3 nA

7.7 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.91 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LT1716HS5#TRM

Analog Devices

Comparator

Automotive

Gull Wing

5

VSSOP

Rectangular

Plastic/Epoxy

-22 V

2.9 mV

1.4 uA

Yes

1

BIPOLAR

-15 V

Tape And Reel

15 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

22 V

0.037 in (0.95 mm)

125 °C (257 °F)

5.5 µs

Open-Collector

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G5

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e0

20 s

235 °C (455 °F)

0.114 in (2.9 mm)

LT6700HS6-1#TRM

Analog Devices

Comparator

Automotive

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

50 nA

Yes

2

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Tin/Lead

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e0

0.114 in (2.9 mm)

TLV3404IPWR

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

4

2.56 μA

0 V

Tape And Reel

5 V

±1.35/±8/2.7/16 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

17 V

0.026 in (0.65 mm)

125 °C (257 °F)

100 pA

175 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

260 °C (500 °F)

0.197 in (5 mm)

LM2903PSRG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

15 mV

-500 nA

Yes

2

BIPOLAR

1 mA

Tape And Reel

5 V

5 V

Small Outline

SOP8,.3

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

50 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

260 °C (500 °F)

0.244 in (6.2 mm)

LM239PWRE4

Texas Instruments

Comparator

Other

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

5 mV

250 nA

Yes

4

BIPOLAR

2 mA

Tape And Reel

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

36 V

0.026 in (0.65 mm)

85 °C (185 °F)

250 nA

700 ns

Open-Collector

-25 °C (-13 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

LMV762MA

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1 mV

50 pA

Yes

2

AEC-Q100

1.4 mA

Tube

5 V

2.7/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

5 pA

225 ns

Push-Pull

-40 °C (-40 °F)

Tin/Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

235 °C (455 °F)

0.193 in (4.9 mm)

LT6700HS6-2#TRMPBF

Analog Devices

Comparator

Automotive

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

50 nA

Yes

2

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

AP331AWRG-7

Diodes Incorporated

Comparator

Commercial

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

9 mV

500 nA

Yes

1

BIPOLAR

2.5 mA

Tape And Reel, 7 Inch

5 V

±1/±18/2/36 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

40 V

0.037 in (0.95 mm)

70 °C (158 °F)

400 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LM139AWG/883

Texas Instruments

Comparator

Military

Gull Wing

14

SOP

Rectangular

Ceramic, Glass-Sealed

0 V

2 mV

-1 nA

Yes

4

BIPOLAR

MIL-STD-883

2 mA

0 V

5 V

5 V

Small Outline

SOP14,.4

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

100 nA

1 µs

Open-Collector, Open-Drain

-55 °C (-67 °F)

Tin Lead

Dual

R-GDSO-G14

1

0.092 in (2.33 mm)

0.25 in (6.35 mm)

No

e0

0.39 in (9.906 mm)

LM239PWRG4

Texas Instruments

Comparator

Other

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

5 mV

400 nA

Yes

4

BIPOLAR

2 mA

Tape And Reel

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

36 V

0.026 in (0.65 mm)

85 °C (185 °F)

250 nA

1.3 µs

Open-Collector

-25 °C (-13 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

LM339ADE4

Texas Instruments

Comparator

Commercial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

3 mV

400 nA

Yes

4

BIPOLAR

2 mA

Tube

5 V

5 V

Small Outline

SOP14,.24

Comparators

36 V

0.05 in (1.27 mm)

70 °C (158 °F)

250 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

LMC7211AIM5

Texas Instruments

Comparator

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

-8 V

8 mV

0.4 pA

Yes

1

CMOS

12 μA

Tape And Reel

5 V

2.7/15 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

8 V

0.038 in (0.953 mm)

85 °C (185 °F)

0.4 pA

4 µs

Push-Pull

-40 °C (-40 °F)

Tin/Lead

Dual

R-PDSO-G5

1

0.047 in (1.19 mm)

0.063 in (1.6 mm)

No

e0

260 °C (500 °F)

0.115 in (2.92 mm)

LMV762MA/NOPB

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1 mV

50 pA

Yes

2

AEC-Q100

1.4 mA

Tube

2.7 V

2.7/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

5 pA

120 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LT1719CS8#TRMPBF

Analog Devices

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-6 V

3.5 mV

0 uA

Yes

1

BIPOLAR

-5 V

Tape And Reel

5 V

Small Outline

Comparators

6 V

0.05 in (1.27 mm)

70 °C (158 °F)

7 ns

Open-Emitter

0 °C (32 °F)

Matte Tin - annealed

Dual

R-PDSO-G8

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

e3

30 s

260 °C (500 °F)

0.193 in (4.9025 mm)

ADCMP600BKSZ-R2

Analog Devices

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

BIPOLAR

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

5 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

INA301A3QDGKRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

35 uV

Yes

1

100 dB

AEC-Q100

700 μA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

4 V/us

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

36 V

750 ns

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold Silver

Dual

S-PDSO-G8

2

0.043 in (1.1 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LM2901VDR2G

Onsemi

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

15 mV

500 nA

Yes

4

BIPOLAR

2.5 mA

5 V

5 V

Small Outline

SOP14,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

TLV3402IDGK

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

2

1.28 μA

0 V

Tube

5 V

±1.35/±8/2.7/16 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

17 V

0.026 in (0.65 mm)

125 °C (257 °F)

100 pA

175 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

AD8561ARU-REEL

Analog Devices

Comparator

Industrial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

-7 V

8 mV

Yes

1

BIPOLAR

-5 V

Tape And Reel

5 V

3/5/±5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

7 V

0.026 in (0.65 mm)

85 °C (185 °F)

7 ns

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

240 °C (464 °F)

0.173 in (4.4 mm)

LMV393M/NOPB

Texas Instruments

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

7 mV

250 nA

Yes

2

BICMOS

100 μA

0 V

Tube

2.7 V

3/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

85 °C (185 °F)

250 nA

450 ns

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

260 °C (500 °F)

0.193 in (4.9 mm)

LT1721IGN

Analog Devices

Comparator

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

4.5 mV

-6 uA

Yes

4

BIPOLAR

5 V

Small Outline, Shrink Pitch

Comparators

7 V

0.025 in (0.635 mm)

85 °C (185 °F)

7 ns

Push-Pull

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G16

0.069 in (1.75 mm)

0.154 in (3.9116 mm)

No

e0

0.193 in (4.9 mm)

TL331VSN4T3G

Onsemi

Comparator

Automotive

Gull Wing

5

TSOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

1

AEC-Q100

1.25 mA

Tape And Reel

5 V

Small Outline, Thin Profile

TSOP5/6,.11,37

Comparators

36 V

0.037 in (0.95 mm)

125 °C (257 °F)

250 nA

850 ns

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.059 in (1.5 mm)

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LM2903VQDRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

7 mV

-500 nA

Yes

2

BIPOLAR

AEC-Q100

1 mA

0 V

Tape And Reel

5 V

5/32 V

Small Outline

SOP8,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

50 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LM393PWRE4

Texas Instruments

Comparator

Commercial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

9 mV

-400 nA

Yes

2

BIPOLAR

2.5 mA

5 V

5/30 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

36 V

0.026 in (0.65 mm)

70 °C (158 °F)

250 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.173 in (4.4 mm)

LT6700HS6-1

Analog Devices

Comparator

Automotive

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

50 nA

Yes

2

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e0

20 s

235 °C (455 °F)

0.114 in (2.9 mm)

MAX912ESE

Maxim Integrated

Comparator

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-7 V

3 mV

8 uA

Yes

2

BIPOLAR

-5 V

5 V

5/±5 V

Small Outline

SOP16,.25

Comparators

7 V

0.05 in (1.27 mm)

85 °C (185 °F)

5 uA

10 ns

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.39 in (9.9 mm)

MAX912ESE+

Analog Devices

Comparator

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-7 V

3 mV

8 uA

Yes

2

BIPOLAR

10 mA

-5 V

5 V

5/±5 V

Small Outline

SOP16,.25

Comparators

7 V

0.05 in (1.27 mm)

85 °C (185 °F)

5 uA

10 ns

-40 °C (-40 °F)

Matte Tin - annealed

Dual

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.39 in (9.9 mm)

TL3016IPWR

Texas Instruments

Comparator

Industrial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

-7 V

3 mV

10 uA

Yes

1

BIPOLAR

12.5 mA

-5 V

Tape And Reel

5 V

±5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

7 V

0.026 in (0.65 mm)

85 °C (185 °F)

10 uA

7.8 µs

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.173 in (4.4 mm)

TLV3492AIDCNTG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

LSSOP

Rectangular

Plastic/Epoxy

15 mV

10 pA

Yes

2

CMOS

1.2 μA

5 V

2/5 V

Small Outline, Low Profile, Shrink Pitch

TSSOP8,.1

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

12 µs

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

TLV7031QDBVRQ1

Texas Instruments

Comparator

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

8 mV

Yes

1

AEC-Q100

900 nA

Tape And Reel

5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

7 V

0.037 in (0.95 mm)

125 °C (257 °F)

2 pA

3 µs

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

e4

260 °C (500 °F)

0.114 in (2.9 mm)

TS881ICT

STMicroelectronics

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

6 mV

100 pA

Yes

1

1.35 μA

Tape And Reel

1.2 V

1.2/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

6 µs

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

30 s

260 °C (500 °F)

0.079 in (2 mm)

LMV331SE-7

Diodes Incorporated

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

1

BICMOS

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

300 ns

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.051 in (1.3 mm)

e3

30 s

260 °C (500 °F)

0.085 in (2.15 mm)

PLM393BIDGKR

Texas Instruments

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

2 mV

25 nA

Yes

2

BIPOLAR

800 μA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

38 V

0.026 in (0.65 mm)

85 °C (185 °F)

25 nA

1 µs

Open-Collector

-40 °C (-40 °F)

Dual

S-PDSO-G8

0.043 in (1.1 mm)

0.118 in (3 mm)

0.118 in (3 mm)

TLC3704IDRG4

Texas Instruments

Comparator

Industrial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

-18 V

7 mV

2 nA

Yes

4

CMOS

125 μA

5 V

5 V

Small Outline

SOP14,.25

Comparators

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

2 nA

2.7 µs

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

TS3021HIYLT

STMicroelectronics

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

7 mV

300 nA

Yes

1

AEC-Q100

Tape And Reel

3.3 V

Small Outline, Low Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

5.5 V

0.037 in (0.95 mm)

150 °C (302 °F)

160 nA

50 ns

Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-G5

0.057 in (1.45 mm)

0.063 in (1.6 mm)

0.114 in (2.9 mm)

AD8561AR-REEL

Analog Devices

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-7 V

8 mV

Yes

1

BIPOLAR

-5 V

Tape And Reel

5 V

3/5/±5 V

Small Outline

SOP8,.45

Comparators

7 V

0.05 in (1.27 mm)

85 °C (185 °F)

7 ns

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

240 °C (464 °F)

0.193 in (4.9 mm)

LM2903VQPWRG4Q1

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

0 V

7 mV

-500 nA

Yes

2

BIPOLAR

AEC-Q100

1 mA

0 V

Tape And Reel

5 V

5/32 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

50 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.173 in (4.4 mm)

LM339PW

Texas Instruments

Comparator

Commercial

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

5 mV

400 nA

Yes

4

BIPOLAR

2 mA

Tube

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

36 V

0.026 in (0.65 mm)

70 °C (158 °F)

250 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

LMC6762BIM/NOPB

Texas Instruments

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

5 mV

1 pA

Yes

2

CMOS

20 μA

0 V

Tube

5 V

2.7/15 V

Small Outline

SOP8,.25

Comparators

16 V

0.05 in (1.27 mm)

85 °C (185 °F)

0.4 pA

4 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.