Maxim Integrated Comparators 1,031

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
MAX9967BRCCQ-D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	2	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX9961ADCCQ-TD	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	20 mV	25 uA	Yes	2	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100		0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX901BMSE/PR-T	Maxim Integrated	Comparator																			Comparators
MAX944CPD	Maxim Integrated	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy		3 mV	300 nA	No	4	BIPOLAR	2.4 mA		3 V	3/5 V	In-Line	DIP14,.3	Comparators	6.5 V	0.1 in (2.54 mm)	70 °C (158 °F)		80 ns	Push-Pull	0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T14	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0	20 s	240 °C (464 °F)	0.75 in (19.05 mm)
MAX9966BGCCQ+D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	4	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		1.2 ns	Open-Collector	0 °C (32 °F)	Matte Tin	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e3			0.551 in (14 mm)
MAX516AENG	Maxim Integrated	Comparator	Industrial	Through-Hole	24	DIP	Rectangular	Plastic/Epoxy		10 mV	400 nA	No	4	CMOS	10 mA		4.75 V	5/15 V	In-Line	DIP24,.3	Comparators	17 V	0.1 in (2.54 mm)	85 °C (185 °F)	300 nA	800 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T24	1	0.225 in (5.72 mm)	0.3 in (7.62 mm)	No	e0		245 °C (473 °F)
MAX921MJA	Maxim Integrated	Comparator	Military	Through-Hole	8	DIP	Rectangular	Ceramic, Metal-Sealed Cofired	-0.3 V	10 mV		No	1	CMOS	5 μA		3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	125 °C (257 °F)		14 µs		-55 °C (-67 °F)	Tin Lead	Dual	R-CDIP-T8	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0
MAX900BCPP+	Maxim Integrated	Comparator	Commercial	Through-Hole	20	DIP	Rectangular	Plastic/Epoxy	-6 V	6 mV	15 uA	No	4	CMOS	25 mA	-5 V	5 V	5,5/10,GND/-5 V	In-Line	DIP20,.3	Comparators	6 V	0.1 in (2.54 mm)	70 °C (158 °F)	10 uA	10 ns		0 °C (32 °F)	Matte Tin	Dual	R-PDIP-T20	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e3	30 s	260 °C (500 °F)	1.03 in (26.16 mm)
MAX9100ESA+T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		20 mV	30 nA	Yes	1	BICMOS	13 μA		5 V	1/5.5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	15 nA		Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3			0.193 in (4.9 mm)
MAX903CSA-T	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V	6 mV	15 uA	Yes	1	CMOS	6 mA	-5 V	5 V	5,5/10,GND/-5 V	Small Outline	SOP8,.3	Comparators	6 V	0.05 in (1.27 mm)	70 °C (158 °F)	10 uA	10 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX909ESA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-7 V	3.5 mV	500 nA	Yes	1	BIPOLAR	1.8 mA	-5 V	5 V	5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 nA	45 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX981CSA-T	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	10 mV		Yes	1		3.8 μA	0 V	3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	70 °C (158 °F)		300 µs	Open-Drain	0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G8				No	e0
MAX900BEPP+	Maxim Integrated	Comparator	Industrial	Through-Hole	20	DIP	Rectangular	Plastic/Epoxy	-6 V	6 mV	15 uA	No	4	CMOS	25 mA	-5 V	5 V	5,5/10,GND/-5 V	In-Line	DIP20,.3	Comparators	6 V	0.1 in (2.54 mm)	85 °C (185 °F)	10 uA	10 ns		-40 °C (-40 °F)	Matte Tin	Dual	R-PDIP-T20	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e3	30 s	260 °C (500 °F)	1.03 in (26.16 mm)
MAX907MSA/PR	Maxim Integrated	Comparator	Military	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		3.5 mV	500 nA	Yes	2	BIPOLAR	1.2 mA		5 V	5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	125 °C (257 °F)	300 nA	45 ns		-55 °C (-67 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	245 °C (473 °F)	0.193 in (4.9 mm)
MXL1016IN8	Maxim Integrated	Comparator	Other	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-7 V	3.5 mV	13 uA	No	1			-5 V	5 V		In-Line		Comparators	7 V	0.1 in (2.54 mm)	85 °C (185 °F)		10 ns	Push-Pull	-20 °C (-4 °F)		Dual	R-PDIP-T8	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No				0.369 in (9.375 mm)
MAX996EUD	Maxim Integrated	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy	0 V	7 mV	10 nA	Yes	4	BIPOLAR	96 μA	0 V	2.7 V	±1.5/±2.5/3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)		210 ns	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G14	1	0.043 in (1.1 mm)	0.173 in (4.4 mm)	No	e0		245 °C (473 °F)	0.197 in (5 mm)
MAX966ESA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		7 mV	50 nA	Yes	2	CMOS	10 μA		3 V	1.5/5.5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	50 nA	20 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
V62/09640-03XB	Maxim Integrated	Comparator	Military	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		10 mV		Yes	2		7.5 μA			±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators		0.05 in (1.27 mm)	125 °C (257 °F)		14 µs		-55 °C (-67 °F)		Dual	R-PDSO-G8				No
MAX9698BCSE+T	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V	3 mV	25 uA	Yes	1	BIPOLAR		-5 V	5 V		Small Outline		Comparators	6 V		70 °C (158 °F)		6 ns		0 °C (32 °F)		Dual	R-PDSO-G8
MAX999EUK/GH9-T	Maxim Integrated	Comparator		Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		4.5 mV	30 uA	Yes	1		6.5 mA		5 V		Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	85 °C (185 °F)	15 uA	4.5 ns	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)					0.114 in (2.9 mm)
MAX984CSE-T	Maxim Integrated	Comparator	Commercial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	0 V	10 mV		Yes	4		8 μA	0 V	3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	70 °C (158 °F)		300 µs	Open-Drain	0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G16				No	e0
MAX9967ADCCQ-TD	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	20 mV	25 uA	Yes	2	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100		0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX941CSA-T	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		3 mV	300 nA	Yes	1	BIPOLAR	700 μA		3 V	3/5 V	Small Outline	SOP8,.25	Comparators	6.5 V	0.05 in (1.27 mm)	70 °C (158 °F)	300 nA	80 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX9043BEUB-T	Maxim Integrated	Comparator	Industrial	Gull Wing	10	TSSOP	Square	Plastic/Epoxy		9 mV	25 nA	Yes	2	BIPOLAR	130 μA		5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP10,.19,20	Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)	25 nA	450 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G10	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0			0.118 in (3 mm)
MAX9015AEKA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	LSSOP	Rectangular	Plastic/Epoxy		10 mV	2 nA	Yes	1	BICMOS	2 μA		5 V	5 V	Small Outline, Low Profile, Shrink Pitch	TSSOP8,.1	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	1 nA	28 µs	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G8	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No				0.114 in (2.9 mm)
MAX900AMJP	Maxim Integrated	Comparator	Military	Through-Hole	20	DIP	Rectangular	Ceramic, Glass-Sealed	-6 V	3 mV	10 uA	No	4	CMOS	25 mA	-5 V	5 V	5,5/10,GND/-5 V	In-Line	DIP20,.3	Comparators	6 V	0.1 in (2.54 mm)	125 °C (257 °F)	6 uA	10 ns		-55 °C (-67 °F)	Tin Lead	Dual	R-GDIP-T20	1			No	e0
MAX9964BGCCQ	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	4	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX942EUA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		5.5 mV	400 nA	Yes	2	BIPOLAR	1.2 mA		3 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	400 nA	80 ns		-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0		245 °C (473 °F)	0.118 in (3 mm)
MAX923EPA	Maxim Integrated	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		No	2	CMOS	6 μA		3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	85 °C (185 °F)		14 µs		-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0			0.369 in (9.375 mm)
MAX9101EUK-T	Maxim Integrated	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		20 mV	30 nA	Yes	1	BICMOS	13 μA		5 V	1/5.5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	85 °C (185 °F)	15 nA		Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e0			0.114 in (2.9 mm)
MAX9021AXK-T	Maxim Integrated	Comparator	Automotive	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	8 mV	80 nA	Yes	1		5 μA	0 V	5 V	±1.25/±2.75/2.5/5.5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)		8 µs		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e0			0.079 in (2 mm)
MAX9109EUT	Maxim Integrated	Comparator	Industrial	Gull Wing	6	TSOP	Rectangular	Plastic/Epoxy		4 mV		Yes	1	BIPOLAR	700 μA		5 V	5 V	Small Outline, Thin Profile	TSOP6,.11,37	Comparators		0.037 in (0.95 mm)	85 °C (185 °F)	350 nA			-40 °C (-40 °F)		Dual	R-PDSO-G6				No
MAX9686BCSA+T	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V	3 mV	25 uA	Yes	1	BIPOLAR		-5 V	5 V		Small Outline		Comparators	6 V		70 °C (158 °F)		6 ns		0 °C (32 °F)		Dual	R-PDSO-G8
MAX9679ETG+T	Maxim Integrated	Comparator																			Comparators
MAX989EUA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	0 V	7 mV	10 nA	Yes	2	CMOS	48 μA	0 V	5 V	±1.5/±2.5/3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	10 nA	300 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0		245 °C (473 °F)	0.118 in (3 mm)
MAX977ESD+	Maxim Integrated	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		3 mV	-300 nA	Yes	2	CMOS	5 μA		5 V	3/5 V	Small Outline	SOP14,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 nA	28 ns		-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3			0.341 in (8.65 mm)
MAX902CPD	Maxim Integrated	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy	-6 V	6 mV	15 uA	No	2	CMOS	12 mA	-5 V	5 V	5,5/10,GND/-5 V	In-Line	DIP14,.3	Comparators	6 V	0.1 in (2.54 mm)	70 °C (158 °F)	10 uA	10 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T14	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0			0.75 in (19.05 mm)
MAX9679ETG+TCBC	Maxim Integrated	Comparator																			Comparators
LMX393HAUA	Maxim Integrated	Comparator	Automotive	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		7 mV	400 nA	Yes	2	CMOS	300 μA		2.7 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	500 ns	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0		245 °C (473 °F)	0.118 in (3 mm)
MAX9967BGCCQ	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	2	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX993ESD-T	Maxim Integrated	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	0 V	7 mV	10 nA	Yes	4		24 μA	0 V	5 V	±1.5/±2.5/3/5 V	Small Outline	SOP14,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	10 nA	300 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.341 in (8.65 mm)
MAX962ESA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		2 mV	15 uA	Yes	2	CMOS	18 mA		3 V	3/5 V	Small Outline	SOP8,.25	Comparators	5.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	15 uA	4.5 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	245 °C (473 °F)	0.193 in (4.9 mm)
MAX9052BEUA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		9 mV	25 nA	Yes	2	BIPOLAR	130 μA		5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	25 nA	450 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0			0.118 in (3 mm)
MAX992EUA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	0 V	7 mV	10 nA	Yes	2	CMOS	192 μA	0 V	2.7 V	±1.5/±2.5/3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	10 nA	210 ns	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0		245 °C (473 °F)	0.118 in (3 mm)
MAX973EPA	Maxim Integrated	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	0 V	10 mV		No	2		5.8 μA	0 V	3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	85 °C (185 °F)		300 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0			0.369 in (9.375 mm)
MAX9686BCPA	Maxim Integrated	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-6 V	3 mV	25 uA	No	1	BIPOLAR		-5 V	5 V		In-Line		Comparators	6 V	0.1 in (2.54 mm)	70 °C (158 °F)		6 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T8		0.18 in (4.572 mm)	0.3 in (7.62 mm)		e0			0.369 in (9.375 mm)
MAX9967ADCCQ-D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	20 mV	25 uA	Yes	2	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX9961ADCCQ+D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	20 mV	25 uA	Yes	2	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Matte Tin	Quad	S-PQFP-G100		0.047 in (1.2 mm)	0.551 in (14 mm)	No	e3			0.551 in (14 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.