Maxim Integrated Comparators 1,031

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
MAX9967BMCCQ+D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	2	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Emitter	0 °C (32 °F)	Matte Tin	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e3	30 s	260 °C (500 °F)	0.551 in (14 mm)
LMX393HAUA-T	Maxim Integrated	Comparator	Automotive	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		7 mV	400 nA	Yes	2	CMOS	300 μA		2.7 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	500 ns	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0		245 °C (473 °F)	0.118 in (3 mm)
MAX903CSA	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V	6 mV	15 uA	Yes	1	CMOS	6 mA	-5 V	5 V	5,5/10,GND/-5 V	Small Outline	SOP8,.3	Comparators	6 V	0.05 in (1.27 mm)	70 °C (158 °F)	10 uA	10 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	240 °C (464 °F)	0.193 in (4.9 mm)
MAX9972ACCS	Maxim Integrated	Comparator	Commercial	Gull Wing	80	HTFQFP	Square	Plastic/Epoxy	-6.25 V	10 mV	100 uA	Yes	4	BICMOS		-5 V	8 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	9.4 V	0.02 in (0.5 mm)	70 °C (158 °F)		2 ns	Open-Drain	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G80	3	0.047 in (1.2 mm)	0.472 in (12 mm)	No	e0			0.472 in (12 mm)
MAX9966BGCCQ+TD	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	4	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		1.2 ns	Open-Collector	0 °C (32 °F)	Matte Tin	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e3			0.551 in (14 mm)
MAX907ESA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		3.5 mV	500 nA	Yes	2	BIPOLAR	1 mA		5 V	5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 nA	45 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0		245 °C (473 °F)	0.193 in (4.9 mm)
MAX913EPA	Maxim Integrated	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-7 V	3 mV	8 uA	No	1	BIPOLAR	10 mA	-5 V	5 V	5/±5 V	In-Line	DIP8,.3	Comparators	7 V	0.1 in (2.54 mm)	85 °C (185 °F)	5 uA	10 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0			0.369 in (9.375 mm)
MXL1016CS8-T	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-7 V	3.5 mV	13 uA	Yes	1	TTL	35 mA	-5 V	5 V	5/±5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	70 °C (158 °F)	10 uA	10 ns	Push-Pull	0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX9062EBS+T	Maxim Integrated	Comparator	Industrial	Ball	4	FBGA	Square	Plastic/Epoxy				Yes		BICMOS	1.1 μA		3.3 V	3.3 V	Grid Array, Fine Pitch	BGA4,2X2,20	Comparators		0.02 in (0.5 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Matte Tin	Bottom	S-PBGA-B4	1			No	e3
MAX9698BCSE	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V	3 mV	25 uA	Yes	1	BIPOLAR		-5 V	5 V		Small Outline		Comparators	6 V	0.05 in (1.27 mm)	70 °C (158 °F)		6 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)		e0			0.193 in (4.9 mm)
MAX9052BESA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		9 mV	25 nA	Yes	2	BIPOLAR	130 μA		5 V	3/5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	25 nA	450 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
LMX339HASD+	Maxim Integrated	Comparator	Automotive	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		7 mV	400 nA	Yes	4	CMOS	430 μA		2.7 V	3/5 V	Small Outline	SOP14,.25	Comparators	6 V	0.05 in (1.27 mm)	125 °C (257 °F)	250 nA	500 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
MAX944ESD	Maxim Integrated	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		3 mV	400 nA	Yes	4	BIPOLAR	2.4 mA		3 V	3/5 V	Small Outline	SOP14,.25	Comparators	6.5 V	0.05 in (1.27 mm)	85 °C (185 °F)		80 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	240 °C (464 °F)	0.341 in (8.65 mm)
LMX331AUK+C7Z	Maxim Integrated	Comparator																			Comparators								Matte Tin			1				e3	30 s	260 °C (500 °F)
MAX9660ATA+	Maxim Integrated	Comparator																			Comparators								Matte Tin			1				e3	30 s	260 °C (500 °F)
MAX9043AEUB	Maxim Integrated	Comparator	Industrial	Gull Wing	10	TSSOP	Square	Plastic/Epoxy		7 mV	10 nA	Yes	2				5 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)		450 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G10	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0		245 °C (473 °F)	0.118 in (3 mm)
MAX9142EKA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		4.5 mV		Yes		BIPOLAR	300 μA			3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.1	Comparators		0.025 in (0.635 mm)	85 °C (185 °F)	320 nA	40 ns		-40 °C (-40 °F)		Dual	R-PDSO-G8	1			No
MAX920EUK-T	Maxim Integrated	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		10 mV	2 nA	Yes	1		1.2 μA		5 V	2/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	85 °C (185 °F)	1 nA	120 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e0		245 °C (473 °F)	0.114 in (2.9 mm)
MAX9050BEUK-T	Maxim Integrated	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		9 mV	25 nA	Yes	1		100 μA		5 V	2.7/5.5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	85 °C (185 °F)	25 nA	450 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e0			0.114 in (2.9 mm)
LMX339AUD-T	Maxim Integrated	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		7 mV	400 nA	Yes	4	CMOS	430 μA		2.7 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	500 ns	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G14	1	0.043 in (1.1 mm)	0.173 in (4.4 mm)	No	e0			0.197 in (5 mm)
MAX919EUK	Maxim Integrated	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		10 mV	2 nA	Yes	1				5 V		Small Outline, Low Profile, Shrink Pitch		Comparators	6 V	0.037 in (0.95 mm)	85 °C (185 °F)		95 µs	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)					0.114 in (2.9 mm)
MAX9140EXK	Maxim Integrated	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		4.5 mV		Yes		BIPOLAR	300 μA			3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators		0.025 in (0.635 mm)	85 °C (185 °F)	320 nA			-40 °C (-40 °F)		Dual	R-PDSO-G5	1			No
MAX9602EUG	Maxim Integrated	Comparator	Industrial	Gull Wing	24	TSSOP	Rectangular	Plastic/Epoxy	-6 V	9 mV	20 uA	Yes	4	BIPOLAR		-5.2 V	5 V	5,-5.2 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP24,.25	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	20 uA	0.5 ns	Open-Emitter	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G24	1	0.043 in (1.1 mm)	0.173 in (4.4 mm)	No	e0		245 °C (473 °F)	0.307 in (7.8 mm)
MAX921CSA-T	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		Yes	1	CMOS	4 μA		3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
LMX331AXK-T	Maxim Integrated	Comparator	Automotive	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		7 mV	400 nA	Yes	1	CMOS	170 μA		2.7 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	500 ns	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e0			0.079 in (2 mm)
MAX921CSA-TG077	Maxim Integrated	Comparator		Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		10 mV		Yes	1		4 μA		3 V		Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)		Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)					0.193 in (4.9 mm)
MAX922ESA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		Yes	2	CMOS	4 μA		3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)		14 µs		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX9972BCCS	Maxim Integrated	Comparator	Commercial	Gull Wing	80	HTFQFP	Square	Plastic/Epoxy	-6.25 V	100 mV	100 uA	Yes	4	BICMOS		-5 V	8 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			9.4 V	0.02 in (0.5 mm)	70 °C (158 °F)		2 ns	Open-Drain	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G80	3	0.047 in (1.2 mm)	0.472 in (12 mm)	No	e0			0.472 in (12 mm)
MAX9201EUE-T	Maxim Integrated	Comparator	Industrial	Gull Wing	16	TSSOP	Rectangular	Plastic/Epoxy	-6 V	7.5 mV	1.5 nA	Yes	4	BIPOLAR		-5 V	5 V	±5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP16,.25	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	5 uA	7 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G16	1	0.043 in (1.1 mm)	0.173 in (4.4 mm)	No	e0			0.197 in (5 mm)
MAX901BCSE	Maxim Integrated	Comparator	Commercial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-6 V	6 mV	15 uA	Yes	4	CMOS	25 mA	-5 V	5 V	5,5/10,GND/-5 V	Small Outline	SOP16,.25	Comparators	6 V	0.05 in (1.27 mm)	70 °C (158 °F)	10 uA	10 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.39 in (9.9 mm)
MAX9077EKA-TG1K	Maxim Integrated	Comparator																			Comparators											1
MAX9965BJCCQ-D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	4	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		1.2 ns	Open-Emitter	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX9690EPA-4	Maxim Integrated	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy		7 mV		No		BIPOLAR				5,-5.2 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	85 °C (185 °F)	20 uA	1.5 ns		-40 °C (-40 °F)	Tin/Lead	Dual	R-PDIP-T8	1				e0
MAX906CPE	Maxim Integrated	Comparator	Commercial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy	-6 V	2.5 mV	10 uA	No	1		48 mA	-5 V	5 V	5/GND,-5/-5.2 V	In-Line	DIP16,.3	Comparators	6 V	0.1 in (2.54 mm)	70 °C (158 °F)	10 uA	2 ns		0 °C (32 °F)	Tin/Lead	Dual	R-PDIP-T16		0.225 in (5.72 mm)	0.3 in (7.62 mm)	No	e0
MAX9698BCPE-4	Maxim Integrated	Comparator	Commercial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy		9 mV		No		BIPOLAR	50 mA	-5 V	5 V	±5 V	In-Line	DIP16,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)	25 uA	6 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T16				No	e0	20 s	240 °C (464 °F)
MAX941AUA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		5.5 mV	400 nA	Yes	1	BIPOLAR	700 μA		3 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	400 nA	80 ns		-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0			0.118 in (3 mm)
MAX921CSA	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		Yes	1	CMOS	4 μA		3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX9686MTW-4	Maxim Integrated	Comparator	Military	Wire	10		Round	Metal		3 mV				BIPOLAR	25 mA	-5 V	5 V	±5 V	Cylindrical	CAN10,.23	Comparators			125 °C (257 °F)	25 uA	6 ns		-55 °C (-67 °F)	Tin/Lead	Bottom	O-MBCY-W10				No	e0
LMX339HAUD	Maxim Integrated	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		7 mV	400 nA	Yes	4	CMOS	430 μA		2.7 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	500 ns	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G14	1	0.043 in (1.1 mm)	0.173 in (4.4 mm)	No	e0		245 °C (473 °F)	0.197 in (5 mm)
MAX9685CPE-2	Maxim Integrated	Comparator	Commercial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy		7 mV		No		BIPOLAR	60 mA			5,-5.2 V	In-Line	DIP16,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)	20 uA	1.5 ns		0 °C (32 °F)	Tin/Lead	Dual	R-PDIP-T16					e0
MAX923CUA-T	Maxim Integrated	Comparator	Commercial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	-0.3 V	10 mV		Yes	2	CMOS	6 μA		3 V	±1.25/±5.5/2.5/11 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	12 V	0.026 in (0.65 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)	Tin Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0			0.118 in (3 mm)
MAX9686CJA	Maxim Integrated	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Ceramic, Glass-Sealed	-6 V	3 mV	25 uA	No	1	BIPOLAR	25 mA	-5 V	5 V	±5 V	In-Line	DIP8,.3	Comparators	6 V	0.1 in (2.54 mm)	70 °C (158 °F)	25 uA	6 ns		0 °C (32 °F)	Tin Lead	Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0
MAX971CUA-T	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Square	Plastic/Epoxy	0 V	10 mV		Yes	1		3.8 μA	0 V	3 V	±1.25/±5.5/2.5/11 V	Small Outline	TSSOP8,.19	Comparators	12 V	0.025 in (0.635 mm)	70 °C (158 °F)		300 µs	Open-Drain	0 °C (32 °F)	Tin Lead	Dual	S-PDSO-G8	1			No	e0
MAX9030AUT-T	Maxim Integrated	Comparator	Automotive	Gull Wing	6	LSSOP	Rectangular	Plastic/Epoxy	0 V	5 mV	80 nA	Yes	1		55 μA	0 V	5 V	3/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	125 °C (257 °F)	80 nA		Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G6	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e4			0.114 in (2.9 mm)
MAX9966BGCCQ-D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	4	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		1.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX992ESA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	7 mV	10 nA	Yes	2	CMOS	192 μA	0 V	2.7 V	±1.5/±2.5/3/5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	10 nA	210 ns	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX9687CPE-4	Maxim Integrated	Comparator	Commercial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy		7 mV		No		BIPOLAR				5,-5.2 V	In-Line	DIP16,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)	20 uA			0 °C (32 °F)	Tin/Lead	Dual	R-PDIP-T16	1			No	e0
MAX9063EBS+	Maxim Integrated	Comparator	Industrial	Ball	4	VFBGA	Square	Plastic/Epoxy			15 nA	Yes	1	BICMOS	1.1 μA		3.3 V	3.3 V	Grid Array, Very Thin Profile, Fine Pitch	BGA4,2X2,20	Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)			Open-Drain	-40 °C (-40 °F)		Bottom	S-PBGA-B4	1	0.026 in (0.67 mm)	0.039 in (1 mm)	No				0.039 in (1 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.