Onsemi Comparators 200

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
KA339	Onsemi	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy	0 V	9 mV	400 nA	No	4	BIPOLAR		2 mA	0 V		5 V	5 V	In-Line	DIP14,.3	Comparators	36 V	0.1 in (2.54 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Matte Tin	Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e3			0.764 in (19.4 mm)
MC3302DR2G	Onsemi	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		40 mV	1 uA	Yes	4	BIPOLAR		2.5 mA			5 V	5 V	Small Outline	SOP14,.25	Comparators	30 V	0.05 in (1.27 mm)	85 °C (185 °F)	500 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
NCS3402DR2G	Onsemi	Comparator	Automotive	Gull Wing	8	LSOP	Rectangular	Plastic/Epoxy		4.4 mV	3 nA	Yes	2			950 nA			5 V	2.7/15 V	Small Outline, Low Profile	SOP8,.25	Comparators	17 V	0.05 in (1.27 mm)	125 °C (257 °F)	250 pA	220 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.061 in (1.55 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
KA2901DTF	Onsemi	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	0 V	15 mV	500 nA	Yes	4	BIPOLAR		2.5 mA	0 V		5 V	5 V	Small Outline	SOP14,.25	Comparators	36 V	0.05 in (1.27 mm)	85 °C (185 °F)	250 nA	1.4 µs	Open-Collector	-40 °C (-40 °F)	Nickel Gold Palladium Silver	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		30 s	260 °C (500 °F)	0.341 in (8.65 mm)
NCS2200SN1T1	Onsemi	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	8 mV	10 nA	Yes	1	CMOS			0 V		3 V	1/5 V	Small Outline, Thin Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	105 °C (221 °F)	10 nA	1.1 µs	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.059 in (1.5 mm)	No	e0		235 °C (455 °F)	0.118 in (3 mm)
LM2903VDR2	Onsemi	Comparator	Automotive	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	15 mV	500 nA	Yes	2	BIPOLAR		2.5 mA	0 V		5 V	5 V	Small Outline	SOP8,.25	Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	250 nA	1.5 µs	Open-Collector	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	30 s	235 °C (455 °F)	0.193 in (4.9 mm)
LM2903SNG	Onsemi	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy		15 mV		No	2	BIPOLAR		2.5 mA				±1/±18/2/36 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	105 °C (221 °F)	250 nA	1 µs		-40 °C (-40 °F)	Tin	Dual	R-PDIP-T8				No	e3
LM239AMX	Onsemi	Comparator	Other	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	0 V	4 mV	400 nA	Yes	4	BIPOLAR		2 mA	0 V		5 V	5 V	Small Outline	SOP14,.25	Comparators	36 V	0.05 in (1.27 mm)	85 °C (185 °F)	250 nA	1.3 µs	Open-Collector	-25 °C (-13 °F)	Nickel Gold Palladium Silver	Dual	R-PDSO-G14	1	0.071 in (1.8 mm)	0.156 in (3.95 mm)	No		30 s	260 °C (500 °F)	0.337 in (8.56 mm)
CM050IS01	Onsemi	Comparator	Other							10 mV			1	CMOS					5 V				Comparators	5.5 V		80 °C (176 °F)				-40 °C (-40 °F)							No
NCS2201SN2T1	Onsemi	Comparator	Industrial	Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy		8 mV	10 nA	Yes	1	CMOS					3 V	1/5 V	Small Outline, Thin Profile, Shrink Pitch	TSOP6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	105 °C (221 °F)	10 nA	1.1 µs		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G6	1	0.043 in (1.1 mm)	0.059 in (1.5 mm)	No	e0		235 °C (455 °F)	0.118 in (3 mm)
NCS2302SN2T1	Onsemi	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		7 mV	10 nA	Yes	1	CMOS					6 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	12 V	0.037 in (0.95 mm)	105 °C (221 °F)	10 nA	1.75 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.059 in (1.5 mm)	No	e0			0.118 in (3 mm)
LA6393JM	Onsemi	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		7 mV		Yes	2	BIPOLAR		1.2 mA			5 V	5 V	Small Outline	SOP8,.25	Comparators		0.05 in (1.27 mm)	85 °C (185 °F)	250 nA	1.3 µs		-40 °C (-40 °F)		Dual	R-PDSO-G8				No
NCV2903DMR2	Onsemi	Comparator	Automotive	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	0 V	15 mV	500 nA	Yes	2	BIPOLAR	AEC-Q100	2.5 mA	0 V		5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	36 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	1.5 µs	Open-Collector	-40 °C (-40 °F)	Tin/Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0	30 s	235 °C (455 °F)	0.118 in (3 mm)
NCV2901DR2	Onsemi	Comparator	Automotive	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	0 V	15 mV	500 nA	Yes	4	BIPOLAR	AEC-Q100	2.5 mA	0 V		5 V	5 V	Small Outline	SOP14,.25	Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0		235 °C (455 °F)	0.341 in (8.65 mm)
NCV2901CTR	Onsemi	Comparator	Automotive	No Lead		DIE				15 mV	500 nA	Yes	4	BIPOLAR					5 V		Uncased Chip		Comparators	36 V		125 °C (257 °F)		1.3 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin	Upper	X-XUUC-N				No	e3
MC3302PG	Onsemi	Comparator	Industrial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy		40 mV	1 uA	No	4	BIPOLAR		2.5 mA			5 V	5 V	In-Line	DIP14,.3	Comparators	30 V	0.1 in (2.54 mm)	85 °C (185 °F)	500 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Tin	Dual	R-PDIP-T14		0.185 in (4.69 mm)	0.3 in (7.62 mm)	No	e3		260 °C (500 °F)	0.743 in (18.86 mm)
LA6393M	Onsemi	Comparator	Other	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		5 mV		Yes	2	BIPOLAR						2/36 V	Small Outline	SOP8,.25	Comparators		0.05 in (1.27 mm)	85 °C (185 °F)	250 nA			-30 °C (-22 °F)		Dual	R-PDSO-G8				No
NCS2200SN1T1GH	Onsemi	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		8 mV		Yes	1	CMOS		17 μA		Tape And Reel	3 V		Small Outline, Thin Profile	TSOP5/6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	105 °C (221 °F)		1.1 µs	Push-Pull	-40 °C (-40 °F)	Tin	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.059 in (1.5 mm)		e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
LM311DIE	Onsemi	Comparator	Commercial	No Lead	8	DIE	Rectangular		-18 V	10 mV	300 nA	Yes	1	BIPOLAR			-15 V		15 V		Uncased Chip		Comparators	18 V		70 °C (158 °F)		200 ns	Open-Collector	0 °C (32 °F)		Upper	R-XUUC-N8				No
NCV2200AMUTBG	Onsemi	Comparator	Automotive	No Lead	6	VSON	Rectangular	Plastic/Epoxy		8 mV		Yes	1	CMOS	AEC-Q100	17 μA		Tape And Reel	3 V		Small Outline, Very Think Profile	SOLCC6,.04,16	Comparators	6 V	0.016 in (0.4 mm)	125 °C (257 °F)		1.1 µs	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-N6	1	0.022 in (0.55 mm)	0.039 in (1 mm)		e4	30 s	260 °C (500 °F)	0.047 in (1.2 mm)
NCS2303SN2T1	Onsemi	Comparator	Industrial	Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy		7 mV	10 nA	Yes	1	CMOS					6 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSOP6,.11,37	Comparators	12 V	0.037 in (0.95 mm)	105 °C (221 °F)	10 nA	1.75 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G6		0.043 in (1.1 mm)	0.059 in (1.5 mm)	No	e0			0.118 in (3 mm)
NCS2200SN2T1	Onsemi	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	8 mV	10 nA	Yes	1	CMOS			0 V		3 V	1/5 V	Small Outline, Thin Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	105 °C (221 °F)	10 nA	1.1 µs	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.059 in (1.5 mm)	No	e0		235 °C (455 °F)	0.118 in (3 mm)
NCS2203SN1T1	Onsemi	Comparator	Industrial	Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy		8 mV	10 nA	Yes	1	CMOS					3 V	1/5 V	Small Outline, Thin Profile, Shrink Pitch	TSOP6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	105 °C (221 °F)	10 nA	1.1 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G6	1	0.043 in (1.1 mm)	0.059 in (1.5 mm)	No	e0		235 °C (455 °F)	0.118 in (3 mm)
FAN156L6X	Onsemi	Comparator	Industrial	No Lead	6	VSON	Rectangular	Plastic/Epoxy		15 mV		Yes	1			17 μA			3 V	1.8/5 V	Small Outline, Very Think Profile	SOLCC6,.04,20	Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)		6.2 ns	Push-Pull	-40 °C (-40 °F)	Nickel Gold	Dual	R-PDSO-N6	1	0.022 in (0.55 mm)	0.039 in (1 mm)	No	e4	30 s	260 °C (500 °F)	0.057 in (1.45 mm)
SCY99246SQ2T2G	Onsemi	Comparator	Automotive	Gull Wing	5	VSSOP	Rectangular	Plastic/Epoxy		6 mV	1 nA	Yes	1			250 μA		Tape And Reel	5 V		Small Outline, Very Thin Profile, Shrink Pitch	TSOP5/6,.08,25	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)		90 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.039 in (1 mm)	0.049 in (1.25 mm)		e3	30 s	260 °C (500 °F)	0.079 in (2 mm)
LM393SNG	Onsemi	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy		9 mV		No	2	BIPOLAR		2.5 mA				±1/±18/2/36 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)	250 nA	1 µs		0 °C (32 °F)	Tin	Dual	R-PDIP-T8				No	e3
KA393A	Onsemi	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-18 V	4 mV	400 nA	No	2	BIPOLAR		2.5 mA		Tube	5 V	5 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)	250 nA	1.4 µs	Open-Collector	0 °C (32 °F)	Matte Tin	Dual	R-PDIP-T8		0.21 in (5.33 mm)	0.3 in (7.62 mm)	No	e3			0.386 in (9.805 mm)
KA339D	Onsemi	Comparator	Commercial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		9 mV	400 nA	Yes	4			2 mA			5 V		Small Outline	SOP14,.24	Comparators	36 V	0.05 in (1.27 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)		Dual	R-PDSO-G14		0.071 in (1.8 mm)	0.156 in (3.975 mm)					0.337 in (8.56 mm)
FAN256L8X	Onsemi	Comparator	Industrial	No Lead	8	VSON	Square	Plastic/Epoxy		15 mV		Yes	2			34 μA			3 V	1.8/5 V	Small Outline, Very Think Profile	LCC8,.06SQ,20	Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)		6.2 ns	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	S-PDSO-N8	1	0.022 in (0.55 mm)	0.063 in (1.6 mm)	No	e4	30 s	260 °C (500 °F)	0.063 in (1.6 mm)
NCS2300SN1T1	Onsemi	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		7 mV	10 nA	Yes	1	CMOS					6 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	12 V	0.037 in (0.95 mm)	105 °C (221 °F)	10 nA	1.75 µs		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.059 in (1.5 mm)	No	e0			0.118 in (3 mm)
NCS2252SQ2T2G	Onsemi	Comparator	Automotive	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		6 mV	1 nA	Yes	1			250 μA		Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)		90 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)		e3	30 s	260 °C (500 °F)	0.079 in (2 mm)
NE522N	Onsemi	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy	-7 V	10 mV	40 nA	No	2			35 mA	-5 V		5 V	±5 V	In-Line	DIP14,.3	Comparators	7 V	0.1 in (2.54 mm)	70 °C (158 °F)	40 uA	10 ns	Open-Collector	0 °C (32 °F)		Dual	R-PDIP-T14		0.185 in (4.69 mm)	0.3 in (7.62 mm)	No				0.728 in (18.48 mm)
CM001IS02	Onsemi	Comparator	Automotive							5 mV			1	CMOS					5 V				Comparators	5.5 V		125 °C (257 °F)				-40 °C (-40 °F)							No
NCS2301SN1T1	Onsemi	Comparator	Industrial	Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy		7 mV	10 nA	Yes	1	CMOS					6 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSOP6,.11,37	Comparators	12 V	0.037 in (0.95 mm)	105 °C (221 °F)	10 nA	1.75 µs		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G6		0.043 in (1.1 mm)	0.059 in (1.5 mm)	No	e0			0.118 in (3 mm)
NCV2200SN1T1G	Onsemi	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		8 mV		Yes	1	CMOS	AEC-Q100	17 μA		Tape And Reel	3 V	1/5 V	Small Outline, Thin Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	105 °C (221 °F)		1.1 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.059 in (1.5 mm)	No	e3			0.118 in (3 mm)
NCS2200SQLT1	Onsemi	Comparator	Industrial	No Lead	6	VSON	Rectangular		0 V	8 mV	10 nA	Yes	1	CMOS		17 μA	0 V		3 V	1/5 V	Small Outline, Very Think Profile	SOLCC6,.08,25	Comparators	6 V	0.026 in (0.65 mm)	105 °C (221 °F)		1.1 µs	Push-Pull	-40 °C (-40 °F)	Tin/Lead	Dual	R-XDSO-N6	1	0.039 in (1 mm)	0.079 in (2 mm)	No	e0	30 s	235 °C (455 °F)	0.087 in (2.2 mm)
NCV2393DR2G	Onsemi	Comparator	Automotive	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy			600 pA	Yes	2	CMOS					3 V		Small Outline		Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)		2.1 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)		e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
LA6393AT	Onsemi	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		5 mV		Yes	2	BIPOLAR		1 mA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators		0.025 in (0.635 mm)	125 °C (257 °F)	250 nA	1.3 µs		-40 °C (-40 °F)		Dual	R-PDSO-G8				No
NCS2202SN2T1	Onsemi	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	8 mV	10 nA	Yes	1	CMOS			0 V		3 V	1/5 V	Small Outline, Thin Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	105 °C (221 °F)	10 nA	1.1 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.059 in (1.5 mm)	No	e0		235 °C (455 °F)	0.118 in (3 mm)
LM293AN	Onsemi	Comparator	Other	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-18 V	4 mV	400 nA	No	2	BIPOLAR		2.5 mA		Rail	5 V		In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	85 °C (185 °F)		1.4 µs	Open-Collector	-25 °C (-13 °F)		Dual	R-PDIP-T8		0.175 in (4.45 mm)	0.3 in (7.62 mm)					0.385 in (9.78 mm)
LM339EDR2G	Onsemi	Comparator	Commercial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		9 mV	400 nA	Yes	4						5 V		Small Outline		Comparators	36 V	0.05 in (1.27 mm)	70 °C (158 °F)		1.3 ns	Open-Collector	0 °C (32 °F)	Matte Tin	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)		e3	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
MC3302DTBR2G	Onsemi	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		40 mV	1 uA	Yes	4	BIPOLAR		2.5 mA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	30 V	0.026 in (0.65 mm)	85 °C (185 °F)	500 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
NCS2303SN1T1	Onsemi	Comparator	Industrial	Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy		7 mV	10 nA	Yes	1	CMOS					6 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSOP6,.11,37	Comparators	12 V	0.037 in (0.95 mm)	105 °C (221 °F)	10 nA	1.75 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G6		0.043 in (1.1 mm)	0.059 in (1.5 mm)	No	e0			0.118 in (3 mm)
MDNCV2200AMUTBG	Onsemi	Comparator	Automotive	No Lead	6	VSON	Rectangular	Plastic/Epoxy		0.012 µV		Yes	1	CMOS		17 μA		Tape And Reel	3 V		Small Outline, Very Think Profile	SOLCC6,.04,16	Comparators	6 V	0.016 in (0.4 mm)	125 °C (257 °F)		750 ns	Open-Drain, Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-N6	1	0.022 in (0.55 mm)	0.039 in (1 mm)			40	260 °C (500 °F)	0.047 in (1.2 mm)
LM2901VNG	Onsemi	Comparator	Automotive	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy		15 mV	500 nA	No	4	BIPOLAR		2.5 mA			5 V	5 V	In-Line	DIP14,.3	Comparators	36 V	0.1 in (2.54 mm)	125 °C (257 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Tin	Dual	R-PDIP-T14		0.185 in (4.69 mm)	0.3 in (7.62 mm)	No	e3		260 °C (500 °F)	0.743 in (18.86 mm)
NCS2202AMUTBG	Onsemi	Comparator	Automotive	No Lead	6	VSON	Rectangular	Plastic/Epoxy		12 mV		Yes	1	CMOS		17 μA		Tape And Reel	2.85 V	1/5 V	Small Outline, Very Think Profile	SOLCC6,.04,16	Comparators	6 V	0.016 in (0.4 mm)	125 °C (257 °F)		1 µs	Open-Drain	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-N6	1	0.022 in (0.55 mm)	0.039 in (1 mm)	No	e4			0.047 in (1.2 mm)
NE521D	Onsemi	Comparator	Commercial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	-7 V	10 mV	40 uA	Yes	2	BIPOLAR		35 mA	-5 V		5 V	±5 V	Small Outline	SOP14,.25	Comparators	7 V	0.05 in (1.27 mm)	70 °C (158 °F)	20 uA	9.6 ns	Totem Pole	0 °C (32 °F)	Tin/Lead	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0		235 °C (455 °F)	0.341 in (8.65 mm)
LMV393DR2G	Onsemi	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		9 mV		Yes	2	CMOS		140 μA			2.7 V	2.7/5 V	Small Outline	SOP8,.25	Comparators	5.5 V	0.05 in (1.27 mm)	85 °C (185 °F)		200 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.