Onsemi Comparators 200

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Minimum Isolation Voltage Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Sub-Category Nominal Slow Rate Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Nominal Response Time Output Type Minimum Operating Temperature Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

KA393ADTF

Onsemi

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

4 mV

400 nA

Yes

2

BIPOLAR

2.5 mA

Tape And Reel

5 V

5 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

70 °C (158 °F)

250 nA

1.4 µs

Open-Collector

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

NCV331SN3T1G

Onsemi

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

9 mV

Yes

1

CMOS

AEC-Q100

100 μA

2.7/5 V

Small Outline, Thin Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

5.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

800 ns

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.059 in (1.5 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LA6393AM

Onsemi

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

5 mV

Yes

2

BIPOLAR

1 mA

5 V

5 V

Small Outline

SOP8,.25

Comparators

0.05 in (1.27 mm)

125 °C (257 °F)

250 nA

1.3 µs

-40 °C (-40 °F)

Dual

R-PDSO-G8

No

LA6393T

Onsemi

Comparator

Other

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

5 mV

Yes

2

BIPOLAR

1 mA

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

0.025 in (0.635 mm)

85 °C (185 °F)

250 nA

1.3 µs

-20 °C (-4 °F)

Dual

R-PDSO-G8

No

SCY992200A

Onsemi

Comparator

Other

No Lead

6

HVSON

Rectangular

Plastic/Epoxy

Yes

1

17 μA

3 V

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC6,.04,16

Comparators

6 V

0 in (0 mm)

85 °C (185 °F)

750 ns

Open-Drain

-20 °C (-4 °F)

Dual

R-PDSO-N6

1

0.022 in (0.55 mm)

0.039 in (1 mm)

40

260 °C (500 °F)

0.047 in (1.2 mm)

NCV2903VDR2G

Onsemi

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

15 mV

500 nA

Yes

2

BIPOLAR

AEC-Q100

2.5 mA

5 V

5 V

Small Outline

SOP8,.25

Comparators

36 V

0.05 in (1.27 mm)

150 °C (302 °F)

250 nA

1.5 µs

Open-Collector

-40 °C (-40 °F)

Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TL331SN4T1G

Onsemi

Comparator

Gull Wing

5

TSOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

1

AEC-Q100

1.25 mA

Tape And Reel

5 V

Small Outline, Thin Profile

TSOP5/6,.11,37

36 V

0.037 in (0.95 mm)

125 °C (257 °F)

250 nA

850 ns

Open-Collector

-40 °C (-40 °F)

Dual

R-PDSO-G5

0.043 in (1.1 mm)

0.059 in (1.5 mm)

0.118 in (3 mm)

TL331VSN4T1G

Onsemi

Comparator

Gull Wing

5

TSOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

1

AEC-Q100

1.25 mA

Tape And Reel

5 V

Small Outline, Thin Profile

TSOP5/6,.11,37

36 V

0.037 in (0.95 mm)

125 °C (257 °F)

250 nA

850 ns

Open-Collector

-40 °C (-40 °F)

Dual

R-PDSO-G5

0.043 in (1.1 mm)

0.059 in (1.5 mm)

0.118 in (3 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.