8 Instrumentation Amplifiers 933

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Architecture Programmable Power Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Maximum Input Offset Current (IIO) Minimum Slew Rate Sub-Category Nominal Slow Rate Maximum Non Linearity Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Frequency Compensation Minimum Voltage Gain Minimum Operating Temperature Terminal Finish Nominal Voltage Gain Terminal Position Low-Offset JESD-30 Code Maximum Voltage Gain Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

AMP04ESZ-R7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

600 µV

50 nA

Yes

1

55 dB

1.1 mA

-15 V

15 V

5/±15 V

Small Outline

SOP8,.25

15 nA

Instrumentation Amplifiers

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

700 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AMP04FSZ-REEL7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

900 µV

60 nA

Yes

1

50 dB

-15 V

Tape And Reel, 7 Inch

15 V

Small Outline

20 nA

Instrumentation Amplifiers

0.12 V/us

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

700 kHz

e3

240 °C (464 °F)

0.193 in (4.9 mm)

INA155EA/250

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1 mV

10 pA

Yes

1

92 dB

CMOS

2.8 mA

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

10 pA

Instrumentation Amplifiers

6.5 V/us

0.015 %

7.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

10

-55 °C (-67 °F)

Nickel Palladium Gold

10

Dual

S-PDSO-G8

50

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

550 kHz

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

INA155EA/250G4

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1 mV

10 pA

Yes

1

78 dB

CMOS

2.8 mA

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

10 pA

Instrumentation Amplifiers

6.5 V/us

0.015 %

7.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10

-55 °C (-67 °F)

Nickel Palladium Gold

10

Dual

S-PDSO-G8

50

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

550 kHz

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

INA322EA/250

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

10 mV

10 pA

Yes

1

60 dB

CMOS

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

100 pA

Instrumentation Amplifiers

0.4 V/us

0.01 %

7.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

5

-55 °C (-67 °F)

Nickel Palladium Gold Silver

25

Dual

S-PDSO-G8

1000

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

500 kHz

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

INA322EA/250G4

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

11 mV

10 pA

Yes

1

60 dB

CMOS

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

100 pA

Instrumentation Amplifiers

0.4 V/us

0.015 %

7.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

5

-55 °C (-67 °F)

Nickel Palladium Gold Silver

25

Dual

S-PDSO-G8

1000

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

500 kHz

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

INA331IDGK

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

500 µV

10 pA

Yes

1

90 dB

CMOS

600 μA

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

10 pA

Instrumentation Amplifiers

5 V/us

0.01 %

7.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

5

-55 °C (-67 °F)

Nickel Palladium Gold

25

Dual

S-PDSO-G8

1000

0.043 in (1.1 mm)

0.118 in (3 mm)

No

2 MHz

e4

0.118 in (3 mm)

INA350ABSIDDFR

Texas Instruments

Instrumentation Amplifier

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

1.2 mV

Yes

1

85 dB

135 μA

Tape And Reel, 7 Inch

3.3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.12

0.24 V/us

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

30 pA

10

-40 °C (-40 °F)

Nickel Palladium Gold

20

Dual

R-PDSO-G8

50

1

0.043 in (1.1 mm)

0.063 in (1.6 mm)

100 kHz

e4

260 °C (500 °F)

0.114 in (2.9 mm)

LMP8603MAX/NOPB

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

2 mV

Yes

1

90 dB

1.5 mA

Tape And Reel

3.3/5 V

Small Outline

SOP8,.25

Instrumentation Amplifiers

0.4 V/us

0.05 in (1.27 mm)

125 °C (257 °F)

60 V

-40 °C (-40 °F)

Matte Tin

100

Dual

R-PDSO-G8

1

No

e3

30 s

260 °C (500 °F)

LMP8603QMAX/NOPB

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

2 mV

Yes

1

90 dB

AEC-Q100

1.5 mA

Tape And Reel

3.3/5 V

Small Outline

SOP8,.25

Instrumentation Amplifiers

0.4 V/us

0.05 in (1.27 mm)

125 °C (257 °F)

60 V

-40 °C (-40 °F)

Matte Tin

100

Dual

R-PDSO-G8

1

No

e3

30 s

260 °C (500 °F)

LT1168ACS8#TRPBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

60 µV

350 pA

Yes

1

88 dB

-15 V

Tape And Reel

15 V

Small Outline

400 pA

Instrumentation Amplifiers

0.48 V/us

0.006 %

20 V

0.05 in (1.27 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Matte Tin

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

No

400 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9025 mm)

LT1168CS8#TR

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

80 µV

600 pA

Yes

1

83 dB

-15 V

Tape And Reel

15 V

Small Outline

550 pA

Instrumentation Amplifiers

0.48 V/us

0.008 %

20 V

0.05 in (1.27 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Tin Lead

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

No

400 kHz

e0

0.193 in (4.9025 mm)

LT1168IS8#PBF

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

100 µV

800 pA

Yes

1

81 dB

-15 V

15 V

Small Outline

700 pA

Instrumentation Amplifiers

0.42 V/us

0.01 %

20 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

No

400 kHz

e3

260 °C (500 °F)

0.193 in (4.9025 mm)

LT1920CS8#TRPBF

Analog Devices

Instrumentation Amplifier

Other

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

185 µV

2 nA

Yes

1

75 dB

-15 V

Tape And Reel

15 V

Small Outline

1 nA

Instrumentation Amplifiers

1.2 V/us

0.003 %

20 V

0.05 in (1.27 mm)

70 °C (158 °F)

1

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

10000

0.069 in (1.752 mm)

0.154 in (3.899 mm)

No

1 MHz

e3

0.193 in (4.9025 mm)

LT6370AHS8E#TRPBF

Analog Devices

Operational Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

25 µV

400 nA

Yes

1

94 dB

2.75 mA

-15 V

Tape And Reel

15 V

Small Outline

SOP8,.25

700 nA

Operational Amplifiers

11 V/us

0.027 %

35 V

0.05 in (1.27 mm)

125 °C (257 °F)

1

-40 °C (-40 °F)

Matte Tin Over Nickel

Dual

R-PDSO-G8

1000

0.069 in (1.752 mm)

0.228 in (5.8 mm)

3.1 MHz

e3

0.193 in (4.9 mm)

LT6370AIS8E#TRPBF

Analog Devices

Operational Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

25 µV

400 nA

Yes

1

94 dB

2.75 mA

-15 V

Tape And Reel

15 V

Small Outline

SOP8,.25

700 nA

Operational Amplifiers

11 V/us

0.027 %

35 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin Over Nickel

Dual

R-PDSO-G8

1000

0.069 in (1.752 mm)

0.228 in (5.8 mm)

3.1 MHz

e3

0.193 in (4.9 mm)

LTC1100CN8

Analog Devices

Instrumentation Amplifier

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-9 V

10 µV

135 pA

No

1

90 dB

CMOS

-5 V

5 V

In-Line

65 pA

Instrumentation Amplifiers

0.006 %

9 V

0.1 in (2.54 mm)

85 °C (185 °F)

10

-40 °C (-40 °F)

Tin Lead

Dual

R-PDIP-T8

100

1

0.155 in (3.937 mm)

0.3 in (7.62 mm)

No

18 kHz

e0

LTC6910-1CTS8#TRPBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

VSSOP

Rectangular

Plastic/Epoxy

-5.5 V

1.5 mV

Yes

1

-5 V

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Instrumentation Amplifiers

16 V/us

5.5 V

0.026 in (0.65 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Matte Tin

2

Dual

R-PDSO-G8

100

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

LTC6910-1ITS8#TRPBF

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

VSSOP

Rectangular

Plastic/Epoxy

-5.5 V

1.5 mV

Yes

1

-5 V

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Instrumentation Amplifiers

16 V/us

5.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

2

Dual

R-PDSO-G8

100

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

LTC6910-2ITS8

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

VSSOP

Rectangular

Plastic/Epoxy

-5.5 V

1.5 mV

Yes

1

-5 V

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Instrumentation Amplifiers

16 V/us

5.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

2

Dual

R-PDSO-G8

100

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e0

0.114 in (2.9 mm)

MAX4461TESA

Maxim Integrated

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

950 µV

100 pA

Yes

1

80 dB

BICMOS

1.1 mA

0 V

5 V

3/5 V

Small Outline

SOP8,.25

Instrumentation Amplifiers

0.5 V/us

0.25 %

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

10

Dual

R-PDSO-G8

100

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

2.5 MHz

e0

0.193 in (4.9 mm)

MAX4461TESA+

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

950 µV

100 pA

Yes

1

80 dB

BICMOS

5 V

Small Outline

0.5 V/us

0.25 %

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin - annealed

10

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

250 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

MAX4461TESA-T

Maxim Integrated

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

950 µV

100 pA

Yes

1

80 dB

BICMOS

1.1 mA

0 V

5 V

3/5 V

Small Outline

SOP8,.25

Instrumentation Amplifiers

0.5 V/us

0.25 %

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

10

Dual

R-PDSO-G8

100

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

2.5 MHz

e0

0.193 in (4.9 mm)

MAX4461TESA+T

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-0.3 V

950 µV

100 pA

Yes

1

80 dB

BICMOS

3 V

Small Outline

0.5 V/us

0.25 %

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin - annealed

10

Dual

R-PDSO-G8

100

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

2.5 MHz

e3

0.193 in (4.9 mm)

MCP6G02-E/SN

Microchip Technology

Instrumentation Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

4.5 mV

5 nA

Yes

2

TS 16949

340 μA

Tube

2/5 V

Small Outline

SOP8,.25

Instrumentation Amplifiers

4.5 V/us

0.05 %

7 V

0.05 in (1.27 mm)

125 °C (257 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

50

1

0.069 in (1.75 mm)

0.154 in (3.9116 mm)

No

900 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

SSM2141P

Analog Devices

Instrumentation Amplifier

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-18 V

1 mV

No

1

80 dB

3.5 mA

-15 V

15 V

±15 V

In-Line

DIP8,.3

Operational Amplifiers

9.5 V/us

18 V

0.1 in (2.54 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Tin Lead

1

Dual

R-PDIP-T8

0.21 in (5.33 mm)

0.3 in (7.62 mm)

No

3 MHz

e0

0.389 in (9.88 mm)

SSM2141PZ

Analog Devices

Instrumentation Amplifier

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-18 V

1 mV

No

1

80 dB

3.5 mA

-15 V

15 V

±15 V

In-Line

DIP8,.3

Instrumentation Amplifiers

9.5 V/us

18 V

0.1 in (2.54 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

1

Dual

R-PDIP-T8

0.21 in (5.33 mm)

0.3 in (7.62 mm)

No

3 MHz

e3

0.389 in (9.88 mm)

AD622ANZ

Analog Devices

Instrumentation Amplifier

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-18 V

125 µV

5 nA

No

1

66 dB

1.5 mA

-15 V

15 V

±15 V

In-Line

DIP8,.3

2.5 nA

Instrumentation Amplifiers

1.2 V/us

0.001 %

18 V

0.1 in (2.54 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDIP-T8

1000

0.21 in (5.33 mm)

0.3 in (7.62 mm)

No

1 MHz

e3

0.389 in (9.88 mm)

AD623BRZ-REEL7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-6 V

160 µV

27.5 nA

Yes

1

77 dB

-5 V

Tape And Reel, 7 Inch

5 V

Small Outline

2 nA

Instrumentation Amplifiers

0.3 V/us

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1000

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

800 kHz

e3

0.193 in (4.9 mm)

AD623BRZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-6 V

160 µV

27.5 nA

Yes

1

77 dB

625 μA

-5 V

Tape And Reel

5 V

5 V

Small Outline

SOP8,.25

2 nA

Instrumentation Amplifiers

0.3 V/us

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

800 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD8223BR

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-12.5 V

200 µV

25 nA

Yes

1

86 dB

Bipolar

850 μA

-12 V

12 V

5,±12 V

Small Outline

SOP8,.25

2 nA

Instrumentation Amplifiers

0.3 V/us

12.5 V

0.05 in (1.27 mm)

85 °C (185 °F)

5

-40 °C (-40 °F)

Tin Lead

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

200 kHz

e0

240 °C (464 °F)

0.193 in (4.9 mm)

AD8223BRM

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-12.5 V

200 µV

25 nA

Yes

1

86 dB

Bipolar

850 μA

-12 V

12 V

5,±12 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

2 nA

Instrumentation Amplifiers

0.3 V/us

12.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

5

-40 °C (-40 °F)

Tin Lead

10

Dual

S-PDSO-G8

1000

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

200 kHz

e0

240 °C (464 °F)

0.118 in (3 mm)

AD8223BRM-R7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-12.5 V

200 µV

25 nA

Yes

1

86 dB

Bipolar

850 μA

-12 V

12 V

5,±12 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

2 nA

Instrumentation Amplifiers

0.3 V/us

12.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

5

-40 °C (-40 °F)

Tin Lead

10

Dual

S-PDSO-G8

1000

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

200 kHz

e0

240 °C (464 °F)

0.118 in (3 mm)

AD8228BRZ-RL

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

50 µV

600 pA

Yes

1

100 dB

1.2 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP8,.25

400 pA

Instrumentation Amplifiers

2.5 V/us

0.001 %

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

0.9999

-40 °C (-40 °F)

Matte Tin

1

Dual

R-PDSO-G8

1.0001

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

650 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD8293G80ARJZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

LSSOP

Rectangular

Plastic/Epoxy

50 µV

2 nA

Yes

1

94 dB

1.5 mA

Tape And Reel

5 V

5 V

Small Outline, Low Profile, Shrink Pitch

TSSOP8,.1

4 nA

Instrumentation Amplifiers

0.03 %

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

500 MHz

e4

260 °C (500 °F)

0.114 in (2.9 mm)

AD8428ARZ-RL

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

100 µV

200 nA

Yes

1

130 dB

Bipolar

8 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP8,.25

50 nA

Instrumentation Amplifiers

50 V/us

0.0005 %

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

3.5 MHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LMP8603MME/NOPB

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

2 mV

Yes

1

90 dB

1.5 mA

Tape And Reel

3.3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Instrumentation Amplifiers

0.4 V/us

0.025 in (0.635 mm)

125 °C (257 °F)

60 V

-40 °C (-40 °F)

Matte Tin

100

Dual

R-PDSO-G8

1

No

e3

30 s

260 °C (500 °F)

LT1167ACN8

Analog Devices

Instrumentation Amplifier

Commercial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-20 V

60 µV

450 pA

No

1

88 dB

-15 V

15 V

In-Line

400 pA

Instrumentation Amplifiers

1.2 V/us

0.006 %

20 V

0.1 in (2.54 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Tin Lead

10

Dual

R-PDIP-T8

10000

1

0.155 in (3.937 mm)

0.3 in (7.62 mm)

No

1 MHz

e0

LTC2053HMS8#TR

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-5.5 V

20 µV

10 nA

Yes

1

90 dB

-5 V

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

3 nA

Instrumentation Amplifiers

0.2 V/us

0.001 %

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

-40 °C (-40 °F)

Tin Lead

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

0.118 in (3 mm)

LTC6800HMS8#PBF

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

100 µV

10 nA

Yes

1

90 dB

3 V

Small Outline, Thin Profile, Shrink Pitch

3 nA

Instrumentation Amplifiers

0.2 V/us

0.01 %

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD8223BRZ

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-12.5 V

200 µV

25 nA

Yes

1

86 dB

Bipolar

850 μA

-12 V

12 V

5,±12 V

Small Outline

SOP8,.25

2 nA

Instrumentation Amplifiers

0.3 V/us

12.5 V

0.05 in (1.27 mm)

85 °C (185 °F)

5

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

200 kHz

e3

260 °C (500 °F)

0.193 in (4.9 mm)

PINA350CDSIDSGR

Texas Instruments

Instrumentation Amplifier

No Lead

8

HVSON

Square

Plastic/Epoxy

1.3 mV

Yes

1

85 dB

135 μA

Tape And Reel

3.3 V

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC8,.08,20

0.24 V/us

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

10

-40 °C (-40 °F)

50

Dual

S-PDSO-N8

50

0.031 in (0.8 mm)

0.079 in (2 mm)

100 kHz

0.079 in (2 mm)

AD8293G80BRJZ-R7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

LSSOP

Rectangular

Plastic/Epoxy

30 µV

2 nA

Yes

1

106 dB

1.5 mA

2.7 V

2.7/5 V

Small Outline, Low Profile, Shrink Pitch

TSSOP8,.1

4 nA

Instrumentation Amplifiers

0.009 %

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

500 MHz

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

MAX4196ESA

Maxim Integrated

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

345 µV

20 nA

Yes

1

73 dB

110 μA

5 V

±1.35/±3.75/7.5 V

Small Outline

SOP8,.25

3 nA

Instrumentation Amplifiers

0.06 V/us

8 V

0.05 in (1.27 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Tin Lead

10

Dual

R-PDSO-G8

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

34 kHz

e0

0.193 in (4.9 mm)

MAX4196ESA+

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

345 µV

20 nA

Yes

1

73 dB

110 μA

5 V

±1.35/±3.75/2.7/7.5 V

Small Outline

SOP8,.25

3 nA

Instrumentation Amplifiers

0.06 V/us

8 V

0.05 in (1.27 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin - annealed

10

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

34 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AMP02EPZ

Analog Devices

Instrumentation Amplifier

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-18 V

200 µV

10 nA

No

1

75 dB

-15 V

15 V

In-Line

5 nA

Instrumentation Amplifiers

6 V/us

18 V

0.1 in (2.54 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDIP-T8

10000

0.18 in (4.57 mm)

0.3 in (7.62 mm)

No

1.2 MHz

e3

0.365 in (9.27 mm)

INA337AIDGKR

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

100 µV

2 nA

Yes

1

106 dB

CMOS

3.7 mA

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

2 nA

Instrumentation Amplifiers

0.01 %

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

2 nA

0.1

-40 °C (-40 °F)

Nickel Palladium Gold Silver

100

Dual

S-PDSO-G8

1000

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

1 kHz

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LMP8603MA/NOPB

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

2 mV

Yes

1

90 dB

1.5 mA

Tube

3.3/5 V

Small Outline

SOP8,.25

Instrumentation Amplifiers

0.4 V/us

0.05 in (1.27 mm)

125 °C (257 °F)

60 V

-40 °C (-40 °F)

Matte Tin

100

Dual

R-PDSO-G8

1

No

e3

30 s

260 °C (500 °F)

Instrumentation Amplifiers

An instrumentation amplifier is an electronic circuit that amplifies small differential voltages to produce a larger output voltage signal. The main purpose of an instrumentation amplifier is to provide a high-precision and stable amplification of small signals while rejecting any common-mode noise or interference.

An instrumentation amplifier consists of three operational amplifiers (op-amps) and precision resistors. The first two op-amps are used as buffer amplifiers, and the third op-amp is used as a differential amplifier. The input signals are applied to the buffer amplifiers, which provide high input impedance and low output impedance to minimize loading effects. The differential amplifier then amplifies the difference between the two input signals, and the resulting output signal is proportional to the difference in voltage between the two input signals.

Instrumentation amplifiers are used in applications where small voltage signals need to be accurately measured or amplified. They are commonly used in industrial control systems, biomedical instrumentation, data acquisition systems, and audio equipment.

One advantage of an instrumentation amplifier is that it can be used to measure small differential voltages even in the presence of significant common-mode noise, which can be difficult to achieve with other types of amplifiers. Additionally, many instrumentation amplifiers offer a high level of accuracy, stability, and linearity, which makes them a popular choice for precision measurement applications.