8 Instrumentation Amplifiers 933

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Architecture Programmable Power Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Maximum Input Offset Current (IIO) Minimum Slew Rate Sub-Category Nominal Slow Rate Maximum Non Linearity Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Frequency Compensation Minimum Voltage Gain Minimum Operating Temperature Terminal Finish Nominal Voltage Gain Terminal Position Low-Offset JESD-30 Code Maximum Voltage Gain Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

INA126E

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-18 V

250 µV

25 nA

Yes

1

80 dB

200 μA

-15 V

15 V

±15 V

Small Outline, Shrink Pitch

SOP8,.19

2 nA

Instrumentation Amplifiers

0.012 %

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

5

-40 °C (-40 °F)

100

Dual

S-PDSO-G8

10000

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

200 kHz

e4

260 °C (500 °F)

0.118 in (3 mm)

INA118UB-TR

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

550 µV

5 nA

Yes

1

80 dB

-15 V

15 V

Small Outline

5 nA

0.9 V/us

0.01 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

10

Dual

R-PDSO-G8

10000

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

800 kHz

0.193 in (4.9 mm)

INA155EA/2K5

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1 mV

10 pA

Yes

1

92 dB

CMOS

2.8 mA

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

10 pA

Instrumentation Amplifiers

6.5 V/us

0.015 %

7.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

10

-55 °C (-67 °F)

Nickel Palladium Gold

10

Dual

S-PDSO-G8

50

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

550 kHz

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

INA156EA/2K5G4

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

9 mV

10 pA

Yes

1

65 dB

CMOS

3.2 mA

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

10 pA

Instrumentation Amplifiers

6.5 V/us

0.015 %

7.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10

-55 °C (-67 °F)

Nickel Palladium Gold

10

Dual

S-PDSO-G8

50

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

550 kHz

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LM363H-500

Texas Instruments

Instrumentation Amplifier

Commercial

Wire

8

TO-99

Round

Metal

-18 V

2.5 mV

10 nA

No

1

90 dB

Bipolar

-15 V

15 V

Cylindrical

CAN8,.2

3 nA

Instrumentation Amplifiers

1 V/us

0.05 %

18 V

70 °C (158 °F)

0 °C (32 °F)

Tin/Lead

Bottom

O-MBCY-W8

500

No

e0

LMP8602MMX

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1 mV

20 nA

Yes

1

90 dB

3.3 V

Small Outline, Thin Profile, Shrink Pitch

Instrumentation Amplifiers

0.83 V/us

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

49.75

-40 °C (-40 °F)

Tin Lead

50

Dual

S-PDSO-G8

50.25

1

0.043 in (1.09 mm)

0.118 in (3 mm)

No

60 kHz

e0

40 s

260 °C (500 °F)

0.118 in (3 mm)

PINA350ABSIDSGR

Texas Instruments

Instrumentation Amplifier

No Lead

8

HVSON

Square

Plastic/Epoxy

1.3 mV

Yes

1

85 dB

135 μA

Tape And Reel

3.3 V

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC8,.08,20

0.24 V/us

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

30 pA

10

-40 °C (-40 °F)

20

Dual

S-PDSO-N8

50

0.031 in (0.8 mm)

0.079 in (2 mm)

100 kHz

0.079 in (2 mm)

INA126E-2500

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-18 V

250 µV

25 nA

Yes

1

83 dB

200 μA

-15 V

15 V

±15 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

2 nA

Instrumentation Amplifiers

0.4 V/us

0.012 %

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

5

-40 °C (-40 °F)

100

Dual

S-PDSO-G8

10000

0.043 in (1.1 mm)

0.118 in (3 mm)

No

200 kHz

0.118 in (3 mm)

LM363H-10

Texas Instruments

Instrumentation Amplifier

Commercial

Wire

8

TO-99

Round

Metal

-18 V

2.5 mV

10 nA

No

1

90 dB

Bipolar

-15 V

15 V

Cylindrical

CAN8,.2

3 nA

Instrumentation Amplifiers

0.24 V/us

0.05 %

18 V

70 °C (158 °F)

0 °C (32 °F)

Tin/Lead

Bottom

O-MBCY-W8

10

No

e0

SN0406068DR

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

50 nA

Yes

1

64 dB

Bipolar

750 μA

15 V

5/±2.25/±18 V

Small Outline

SOP8,.25

Instrumentation Amplifiers

0.01 %

0.05 in (1.27 mm)

85 °C (185 °F)

0.1

-40 °C (-40 °F)

Nickel Palladium Gold

1

Dual

R-PDSO-G8

100

3

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

50 kHz

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

PINA350ABSIDDFR

Texas Instruments

Instrumentation Amplifier

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

1.3 mV

Yes

1

85 dB

135 μA

Tape And Reel

3.3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.12

0.24 V/us

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

30 pA

10

-40 °C (-40 °F)

20

Dual

R-PDSO-G8

50

0.043 in (1.1 mm)

0.063 in (1.6 mm)

100 kHz

0.114 in (2.9 mm)

INA156EA/2K5

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

8 mV

10 pA

Yes

1

74 dB

CMOS

3.2 mA

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

10 pA

Instrumentation Amplifiers

6.5 V/us

0.015 %

7.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

10

-55 °C (-67 °F)

Nickel Palladium Gold Silver

10

Dual

S-PDSO-G8

50

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

550 kHz

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LMP8603MMX/NOPB

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

2 mV

Yes

1

90 dB

1.5 mA

Tape And Reel

3.3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Instrumentation Amplifiers

0.4 V/us

0.025 in (0.635 mm)

125 °C (257 °F)

60 V

-40 °C (-40 °F)

Matte Tin

100

Dual

R-PDSO-G8

1

No

e3

30 s

260 °C (500 °F)

INA131AP

Texas Instruments

Instrumentation Amplifier

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-18 V

125 µV

5 nA

No

1

110 dB

Bipolar

3 mA

-15 V

Tube

15 V

±15 V

In-Line

DIP8,.3

5 nA

Instrumentation Amplifiers

0.7 V/us

0.004 %

18 V

0.1 in (2.54 mm)

85 °C (185 °F)

100

-40 °C (-40 °F)

Nickel Palladium Gold

100

Dual

R-PDIP-T8

100

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

70 kHz

e4

0.386 in (9.81 mm)

INA337AIDGKRG4

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

140 µV

2 nA

Yes

1

100 dB

CMOS

3.7 mA

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

2 nA

Instrumentation Amplifiers

0.01 %

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

0.1

-40 °C (-40 °F)

Nickel Palladium Gold

100

Dual

S-PDSO-G8

10000

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

1 kHz

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

INA155E/250G4

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1 mV

10 pA

Yes

1

82 dB

CMOS

2.8 mA

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

10 pA

Instrumentation Amplifiers

6.5 V/us

0.015 %

7.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

10

-40 °C (-40 °F)

Nickel Palladium Gold

10

Dual

S-PDSO-G8

50

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

550 kHz

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LMP8603MM

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1 mV

20 nA

Yes

1

90 dB

3.3 V

Small Outline, Thin Profile, Shrink Pitch

Instrumentation Amplifiers

0.83 V/us

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

99.5

-40 °C (-40 °F)

Tin Lead

100

Dual

S-PDSO-G8

100.5

1

0.043 in (1.09 mm)

0.118 in (3 mm)

No

60 kHz

e0

40 s

260 °C (500 °F)

0.118 in (3 mm)

LMP8602QMMX

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1 mV

20 nA

Yes

1

90 dB

3.3 V

Small Outline, Thin Profile, Shrink Pitch

Instrumentation Amplifiers

0.83 V/us

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

49.75

-40 °C (-40 °F)

50

Dual

S-PDSO-G8

50.25

0.043 in (1.09 mm)

0.118 in (3 mm)

60 kHz

0.118 in (3 mm)

LMP8603MMX

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1 mV

20 nA

Yes

1

90 dB

3.3 V

Small Outline, Thin Profile, Shrink Pitch

Instrumentation Amplifiers

0.83 V/us

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

99.5

-40 °C (-40 °F)

Tin Lead

100

Dual

S-PDSO-G8

100.5

1

0.043 in (1.09 mm)

0.118 in (3 mm)

No

60 kHz

e0

40 s

260 °C (500 °F)

0.118 in (3 mm)

INA848ID

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

35 µV

50 nA

Yes

1

132 dB

8.8 mA

-15 V

15 V

Small Outline

SOP8,.25

10 nA

Instrumentation Amplifiers

45 V/us

0.001 %

20 V

0.05 in (1.27 mm)

125 °C (257 °F)

50 nA

2000

-40 °C (-40 °F)

Nickel Palladium Gold

2000

Dual

R-PDSO-G8

2000

2

0.069 in (1.75 mm)

0.153 in (3.895 mm)

2.8 MHz

e4

30 s

260 °C (500 °F)

0.193 in (4.905 mm)

LMP8602MA

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1 mV

20 nA

Yes

1

90 dB

3.3 V

Small Outline

Instrumentation Amplifiers

0.83 V/us

6 V

0.05 in (1.27 mm)

125 °C (257 °F)

49.75

-40 °C (-40 °F)

Tin Lead

50

Dual

R-PDSO-G8

50.25

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

60 kHz

e0

30 s

235 °C (455 °F)

0.193 in (4.9 mm)

INA114BG

Texas Instruments

Instrumentation Amplifier

Industrial

Through-Hole

8

DIP

Rectangular

Ceramic, Metal-Sealed Cofired

-18 V

150 µV

2 nA

No

1

80 dB

-15 V

15 V

In-Line

2 nA

0.6 V/us

0.01 %

18 V

85 °C (185 °F)

1

-40 °C (-40 °F)

10

Dual

R-CDIP-T8

10000

No

1 MHz

LMP8603QMMX

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1 mV

20 nA

Yes

1

90 dB

3.3 V

Small Outline, Thin Profile, Shrink Pitch

Instrumentation Amplifiers

0.83 V/us

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

99.5

-40 °C (-40 °F)

100

Dual

S-PDSO-G8

100.5

0.043 in (1.09 mm)

0.118 in (3 mm)

60 kHz

0.118 in (3 mm)

INA155U

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1 mV

10 pA

Yes

1

92 dB

CMOS

2.8 mA

Tube

5 V

3/5 V

Small Outline

SOP8,.25

10 pA

Instrumentation Amplifiers

6.5 V/us

0.015 %

7.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

10 pA

10

-55 °C (-67 °F)

Nickel Palladium Gold

10

Dual

R-PDSO-G8

50

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

550 kHz

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

PINA350CDSIDDFR

Texas Instruments

Instrumentation Amplifier

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

1.3 mV

Yes

1

85 dB

135 μA

Tape And Reel

3.3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.12

0.24 V/us

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

10

-40 °C (-40 °F)

50

Dual

R-PDSO-G8

50

0.043 in (1.1 mm)

0.063 in (1.6 mm)

100 kHz

0.114 in (2.9 mm)

INA351ABSIDSGR

Texas Instruments

Instrumentation Amplifier

No Lead

8

HVSON

Square

Plastic/Epoxy

1.3 mV

Yes

1

86 dB

147 μA

Tape And Reel, 7 Inch

3.3 V

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC8,.12,20

0.2 V/us

0.1 %

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

10

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

S-PDSO-N8

50

1

0.031 in (0.8 mm)

0.118 in (3 mm)

100 kHz

e4

260 °C (500 °F)

0.118 in (3 mm)

INA351CDSIDSGR

Texas Instruments

Instrumentation Amplifier

No Lead

8

HVSON

Square

Plastic/Epoxy

1.3 mV

Yes

1

86 dB

147 μA

Tape And Reel, 7 Inch

3.3 V

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC8,.12,20

0.2 V/us

0.1 %

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

10

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

S-PDSO-N8

50

1

0.031 in (0.8 mm)

0.118 in (3 mm)

100 kHz

e4

260 °C (500 °F)

0.118 in (3 mm)

LT1920CN8

Analog Devices

Instrumentation Amplifier

Other

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-20 V

185 µV

2 nA

No

1

75 dB

-15 V

15 V

In-Line

1 nA

Instrumentation Amplifiers

1.2 V/us

0.003 %

20 V

0.1 in (2.54 mm)

70 °C (158 °F)

1

-40 °C (-40 °F)

Tin/Lead

Dual

R-PDIP-T8

10000

1

0.155 in (3.937 mm)

0.3 in (7.62 mm)

No

1 MHz

e0

LT1920IS8#TRPBF

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

185 µV

2 nA

Yes

1

75 dB

-15 V

Tape And Reel

15 V

Small Outline

1 nA

Instrumentation Amplifiers

1.2 V/us

0.003 %

20 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

1 MHz

e3

260 °C (500 °F)

0.193 in (4.9 mm)

AMP04ESZ-REEL7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

600 µV

50 nA

Yes

1

55 dB

-15 V

Tape And Reel, 7 Inch

15 V

Small Outline

15 nA

Instrumentation Amplifiers

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

700 kHz

e3

240 °C (464 °F)

0.193 in (4.9 mm)

AMP02BIEP

Analog Devices

Instrumentation Amplifier

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-18 V

200 µV

30 nA

No

1

75 dB

6 mA

-15 V

15 V

In-Line

15 nA

6 V/us

18 V

0.1 in (2.54 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

10000

Dual

R-PDIP-T8

0.21 in (5.33 mm)

0.3 in (7.62 mm)

No

1.2 MHz

e0

0.389 in (9.88 mm)

AMP-02AZ/883

Analog Devices

Instrumentation Amplifier

Military

Through-Hole

8

DIP

Rectangular

Ceramic, Glass-Sealed

-18 V

200 µV

30 nA

No

1

70 dB

6 mA

-15 V

15 V

±15 V

In-Line

DIP8,.3

10 nA

Instrumentation Amplifiers

6 V/us

0.006 %

18 V

0.1 in (2.54 mm)

125 °C (257 °F)

1

-55 °C (-67 °F)

Tin Lead

10000

Dual

R-GDIP-T8

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

e0

AD8293G80BRJZ-R2

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

LSSOP

Rectangular

Plastic/Epoxy

30 µV

2 nA

Yes

1

106 dB

1.5 mA

2.7 V

2.7/5 V

Small Outline, Low Profile, Shrink Pitch

TSSOP8,.1

4 nA

Instrumentation Amplifiers

0.009 %

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

500 MHz

e3

260 °C (500 °F)

0.114 in (2.9 mm)

AMP04FP

Analog Devices

Instrumentation Amplifier

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-18 V

900 µV

60 nA

No

1

50 dB

1.1 mA

-15 V

15 V

5/±15 V

In-Line

DIP8,.3

20 nA

Instrumentation Amplifiers

0.12 V/us

18 V

0.1 in (2.54 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

10

Dual

R-PDIP-T8

1000

0.21 in (5.33 mm)

0.3 in (7.62 mm)

No

700 kHz

e0

0.389 in (9.88 mm)

AD627ARZ-REEL7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

200 µV

10 nA

Yes

1

77 dB

-5 V

Tape And Reel, 7 Inch

5 V

Small Outline

1 nA

Instrumentation Amplifiers

0.05 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

5

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

80 kHz

e3

240 °C (464 °F)

0.193 in (4.9 mm)

LT1167AIN8#TRPBF

Analog Devices

Instrumentation Amplifier

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-20 V

75 µV

600 pA

No

1

86 dB

-15 V

Tape And Reel

15 V

In-Line

550 pA

Instrumentation Amplifiers

1.2 V/us

0.007 %

20 V

0.1 in (2.54 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin - annealed

10

Dual

R-PDIP-T8

10000

0.3 in (7.62 mm)

1 MHz

e3

LTC1101ACN8

Analog Devices

Instrumentation Amplifier

Commercial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

160 µV

8 nA

No

1

95 dB

CMOS

5 V

In-Line

Instrumentation Amplifiers

0.06 V/us

0.0008 %

0.1 in (2.54 mm)

70 °C (158 °F)

10

0 °C (32 °F)

Tin Lead

Dual

R-PDIP-T8

100

0.155 in (3.937 mm)

0.3 in (7.62 mm)

No

22 kHz

e0

AD627AR-REEL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

200 µV

10 nA

Yes

1

77 dB

-5 V

Tape And Reel

5 V

3/5/±5/±15 V

Small Outline

SOP8,.25

1 nA

Instrumentation Amplifiers

0.05 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

5

-40 °C (-40 °F)

Tin Lead

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

80 kHz

e0

240 °C (464 °F)

0.193 in (4.9 mm)

AD8221ARZ-REEL7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

60 µV

1.5 nA

Yes

1

80 dB

-15 V

Tape And Reel, 7 Inch

15 V

Small Outline

600 pA

Instrumentation Amplifiers

2 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

825 kHz

e3

240 °C (464 °F)

0.193 in (4.9 mm)

LTC2053CMS8-SYNC#TR

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-5.5 V

20 µV

10 nA

Yes

1

100 dB

-5 V

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

3 nA

Instrumentation Amplifiers

0.2 V/us

0.001 %

5.5 V

0.026 in (0.65 mm)

70 °C (158 °F)

0 °C (32 °F)

Tin Lead

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

0.118 in (3 mm)

LTC6910-3HTS8#TR

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

8

VSSOP

Rectangular

Plastic/Epoxy

-5.5 V

1.8 mV

Yes

1

-5 V

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Instrumentation Amplifiers

16 V/us

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

1

-40 °C (-40 °F)

Tin/Lead

2

Dual

R-PDSO-G8

100

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e0

0.114 in (2.9 mm)

SSM2141S

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

2.5 mV

Yes

1

75 dB

-18 V

18 V

Small Outline

Instrumentation Amplifiers

9.5 V/us

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

3 MHz

e0

240 °C (464 °F)

0.193 in (4.9 mm)

LT1101ACN8#PBF

Analog Devices

Instrumentation Amplifier

Commercial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-22 V

250 µV

9 nA

No

1

98 dB

-15 V

15 V

In-Line

700 pA

Instrumentation Amplifiers

0.1 V/us

0.0075 %

22 V

0.1 in (2.54 mm)

70 °C (158 °F)

10

0 °C (32 °F)

Matte Tin

Dual

R-PDIP-T8

100

1

0.155 in (3.937 mm)

0.3 in (7.62 mm)

No

37 kHz

e3

30 s

260 °C (500 °F)

AD8228ARMZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

Yes

1

1.2 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

TSSOP8,.19

Instrumentation Amplifiers

0.025 in (0.635 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

No

e3

30 s

260 °C (500 °F)

LTC6910-3HTS8#TRM

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

8

VSSOP

Rectangular

Plastic/Epoxy

-5.5 V

1.8 mV

Yes

1

-5 V

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Instrumentation Amplifiers

16 V/us

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

1

-40 °C (-40 °F)

Tin/Lead

2

Dual

R-PDSO-G8

100

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e0

0.114 in (2.9 mm)

LTC6910-3ITS8#TRMPBF

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

VSSOP

Rectangular

Plastic/Epoxy

-5.5 V

1.5 mV

Yes

1

-5 V

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Instrumentation Amplifiers

16 V/us

5.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

2

Dual

R-PDSO-G8

100

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

AMP03BJZ/883CZ

Analog Devices

Instrumentation Amplifier

Military

Wire

8

Round

Metal

-18 V

1.5 mV

No

1

75 dB

-15 V

15 V

Cylindrical

Instrumentation Amplifiers

9.5 V/us

0.02 %

18 V

125 °C (257 °F)

-55 °C (-67 °F)

1

Bottom

O-MBCY-W8

No

3 MHz

AD621AR

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

185 µV

2.5 nA

Yes

1

110 dB

Bipolar

1.6 mA

-15 V

15 V

±15 V

Small Outline

SOP8,.25

1.5 nA

Instrumentation Amplifiers

1.2 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

10

-40 °C (-40 °F)

Tin Lead

100

Dual

R-PDSO-G8

1

0.102 in (2.59 mm)

0.154 in (3.9 mm)

No

200 kHz

e0

240 °C (464 °F)

0.193 in (4.9 mm)

Instrumentation Amplifiers

An instrumentation amplifier is an electronic circuit that amplifies small differential voltages to produce a larger output voltage signal. The main purpose of an instrumentation amplifier is to provide a high-precision and stable amplification of small signals while rejecting any common-mode noise or interference.

An instrumentation amplifier consists of three operational amplifiers (op-amps) and precision resistors. The first two op-amps are used as buffer amplifiers, and the third op-amp is used as a differential amplifier. The input signals are applied to the buffer amplifiers, which provide high input impedance and low output impedance to minimize loading effects. The differential amplifier then amplifies the difference between the two input signals, and the resulting output signal is proportional to the difference in voltage between the two input signals.

Instrumentation amplifiers are used in applications where small voltage signals need to be accurately measured or amplified. They are commonly used in industrial control systems, biomedical instrumentation, data acquisition systems, and audio equipment.

One advantage of an instrumentation amplifier is that it can be used to measure small differential voltages even in the presence of significant common-mode noise, which can be difficult to achieve with other types of amplifiers. Additionally, many instrumentation amplifiers offer a high level of accuracy, stability, and linearity, which makes them a popular choice for precision measurement applications.