Analog Devices Instrumentation Amplifiers 963

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Architecture Programmable Power Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Maximum Input Offset Current (IIO) Minimum Slew Rate Sub-Category Nominal Slow Rate Maximum Non Linearity Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Frequency Compensation Minimum Voltage Gain Minimum Operating Temperature Terminal Finish Nominal Voltage Gain Terminal Position Low-Offset JESD-30 Code Maximum Voltage Gain Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

LT1167IS8-1#TRPBF

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

80 µV

600 pA

Yes

1

83 dB

-15 V

Tape And Reel

15 V

Small Outline

550 pA

Instrumentation Amplifiers

1.2 V/us

0.008 %

20 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

1 MHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD623AR-REEL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-6 V

350 µV

27.5 nA

Yes

1

70 dB

625 μA

-5 V

Tape And Reel

5 V

5 V

Small Outline

SOP8,.25

2.5 nA

Instrumentation Amplifiers

0.3 V/us

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

800 kHz

e0

240 °C (464 °F)

0.193 in (4.9 mm)

AD8221AR-REEL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

60 µV

1.5 nA

Yes

1

80 dB

1.2 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP8,.25

600 pA

Instrumentation Amplifiers

2 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

825 kHz

e0

240 °C (464 °F)

0.193 in (4.9 mm)

AD626ARZ-REEL7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

2.5 mV

Yes

1

55 dB

Bipolar

2 mA

-5 V

Tape And Reel, 7 Inch

5 V

5/±5 V

Small Outline

SOP8,.25

Instrumentation Amplifiers

0.22 V/us

0.015 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

10

-40 °C (-40 °F)

Matte Tin

100

Dual

R-PDSO-G8

100

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

100 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

ADA4255ACPZ-R7

Analog Devices

Instrumentation Amplifier

No Lead

28

HVQCCN

Square

14 µV

14 nA

Yes

1

87 dB

16.75 mA

5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC28,.2SQ,20

1.3 nA

3.1 V/us

0.0015 %

5.5 V

0.02 in (0.5 mm)

105 °C (221 °F)

0.0625

-40 °C (-40 °F)

0.125

Quad

S-XQCC-N28

128

0.039 in (1 mm)

0.197 in (5 mm)

1.8 MHz

0.197 in (5 mm)

AD8223ARMZ

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-12.5 V

400 µV

25 nA

Yes

1

74 dB

Bipolar

850 μA

-12 V

12 V

5,±12 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

2 nA

Instrumentation Amplifiers

0.3 V/us

12.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

5

-40 °C (-40 °F)

Matte Tin

10

Dual

S-PDSO-G8

1000

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

200 kHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LT6370IMS8#TRPBF

Analog Devices

Operational Amplifier

Industrial

Gull Wing

8

TSOP

Square

Plastic/Epoxy

35 µV

600 pA

Yes

1

88 dB

2.75 mA

-15 V

Tape And Reel

15 V

Small Outline, Thin Profile

TSSOP8,.19

1 nA

Operational Amplifiers

11 V/us

0.037 %

35 V

0.026 in (0.65 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1000

0.045 in (1.143 mm)

0.118 in (3 mm)

3.1 MHz

e3

0.118 in (3 mm)

AD623AN

Analog Devices

Instrumentation Amplifier

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-6 V

350 µV

27.5 nA

No

1

70 dB

625 μA

-5 V

5 V

5 V

In-Line

DIP8,.3

2.5 nA

Instrumentation Amplifiers

0.3 V/us

6 V

0.1 in (2.54 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

Dual

R-PDIP-T8

1000

0.21 in (5.33 mm)

0.3 in (7.62 mm)

No

800 kHz

e0

0.389 in (9.88 mm)

AD626ARZ

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

2.5 mV

Yes

1

55 dB

Bipolar

2 mA

-5 V

5 V

5/±5 V

Small Outline

SOP8,.25

Instrumentation Amplifiers

0.22 V/us

0.015 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

10

-40 °C (-40 °F)

Matte Tin

100

Dual

R-PDSO-G8

100

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

100 kHz

e3

40 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD623BN

Analog Devices

Instrumentation Amplifier

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-6 V

160 µV

27.5 nA

No

1

77 dB

625 μA

-5 V

5 V

5 V

In-Line

DIP8,.3

2 nA

Instrumentation Amplifiers

0.3 V/us

6 V

0.1 in (2.54 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

Dual

R-PDIP-T8

1000

0.21 in (5.33 mm)

0.3 in (7.62 mm)

No

800 kHz

e0

0.389 in (9.88 mm)

LT6370IS8E#TRPBF

Analog Devices

Operational Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

55 µV

600 pA

Yes

1

88 dB

2.75 mA

-15 V

Tape And Reel

15 V

Small Outline

SOP8,.25

1 nA

Operational Amplifiers

11 V/us

0.037 %

35 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin Over Nickel

Dual

R-PDSO-G8

1000

0.069 in (1.752 mm)

0.228 in (5.8 mm)

3.1 MHz

e3

0.193 in (4.9 mm)

AD8420BRMZ-RL

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

Yes

1

90 μA

Tape And Reel

±2.7/±18/2.7/36 V

Small Outline

TSSOP8,.19

Instrumentation Amplifiers

0.025 in (0.635 mm)

125 °C (257 °F)

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

No

e3

LT1167AIS8#TR

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

75 µV

600 pA

Yes

1

86 dB

-15 V

Tape And Reel

15 V

Small Outline

550 pA

Instrumentation Amplifiers

1.2 V/us

0.007 %

20 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

1 MHz

e0

0.193 in (4.9 mm)

LTC2053IMS8-SYNC#TRPBF

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-5.5 V

20 µV

10 nA

Yes

1

95 dB

CMOS

-5 V

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

3 nA

Instrumentation Amplifiers

0.2 V/us

0.001 %

5.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

200 kHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

MAX4194ESA+

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

690 µV

20 nA

Yes

1

73 dB

110 μA

5 V

±1.35/±3.75/2.7/7.5 V

Small Outline

SOP8,.25

3 nA

Instrumentation Amplifiers

0.06 V/us

8 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin - annealed

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

250 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LT1789IS8-10#TRPBF

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

160 µV

40 nA

Yes

1

88 dB

-15 V

Tape And Reel

15 V

Small Outline

4 nA

Instrumentation Amplifiers

0.066 V/us

0.0045 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

10

-40 °C (-40 °F)

Matte Tin

100

Dual

R-PDSO-G8

1000

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9025 mm)

LT6370AHS8E#PBF

Analog Devices

Operational Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

25 µV

400 nA

Yes

1

94 dB

2.75 mA

-15 V

15 V

Small Outline

SOP8,.25

700 nA

Operational Amplifiers

11 V/us

0.027 %

35 V

0.05 in (1.27 mm)

125 °C (257 °F)

1

-40 °C (-40 °F)

Matte Tin Over Nickel

Dual

R-PDSO-G8

1000

0.069 in (1.752 mm)

0.228 in (5.8 mm)

3.1 MHz

e3

0.193 in (4.9 mm)

AD623BR-REEL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-6 V

160 µV

27.5 nA

Yes

1

77 dB

625 μA

-5 V

Tape And Reel

5 V

5 V

Small Outline

SOP8,.25

2 nA

Instrumentation Amplifiers

0.3 V/us

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

800 kHz

e0

240 °C (464 °F)

0.193 in (4.9 mm)

AD623BR-REEL7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-6 V

160 µV

27.5 nA

Yes

1

77 dB

625 μA

-5 V

Tape And Reel, 7 Inch

5 V

5 V

Small Outline

SOP8,.25

2 nA

Instrumentation Amplifiers

0.3 V/us

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

800 kHz

e0

240 °C (464 °F)

0.193 in (4.9 mm)

AD8223BRMZ-R7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-12.5 V

200 µV

25 nA

Yes

1

86 dB

Bipolar

850 μA

-12 V

Tape And Reel, 7 Inch

12 V

5,±12 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

2 nA

Instrumentation Amplifiers

0.3 V/us

12.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

5

-40 °C (-40 °F)

Matte Tin

10

Dual

S-PDSO-G8

1000

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

200 kHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

ADA4255ACPZ

Analog Devices

Instrumentation Amplifier

No Lead

28

HVQCCN

Square

14 µV

14 nA

Yes

1

87 dB

16.75 mA

5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC28,.2SQ,20

1.3 nA

3.1 V/us

0.0015 %

5.5 V

0.02 in (0.5 mm)

105 °C (221 °F)

0.0625

-40 °C (-40 °F)

0.125

Quad

S-XQCC-N28

128

0.039 in (1 mm)

0.197 in (5 mm)

1.8 MHz

0.197 in (5 mm)

ADA4255ACPZ-RL

Analog Devices

Instrumentation Amplifier

No Lead

28

HVQCCN

Square

14 µV

14 nA

Yes

1

87 dB

16.75 mA

Tape And Reel

5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC28,.2SQ,20

1.3 nA

3.1 V/us

0.0015 %

5.5 V

0.02 in (0.5 mm)

105 °C (221 °F)

0.0625

-40 °C (-40 °F)

0.125

Quad

S-XQCC-N28

128

0.039 in (1 mm)

0.197 in (5 mm)

1.8 MHz

0.197 in (5 mm)

ADA4254ARUZ-R7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

24

TSSOP

Rectangular

Plastic/Epoxy

-16 V

14 µV

14 nA

Yes

1

112 dB

-12 V

12 V

Small Outline, Thin Profile, Shrink Pitch

3.5 nA

Instrumentation Amplifiers

3.1 V/us

0.0015 %

16 V

0.026 in (0.65 mm)

105 °C (221 °F)

0.0625

-40 °C (-40 °F)

Matte Tin

1

Dual

R-PDSO-G24

128

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

1.8 MHz

e3

30 s

260 °C (500 °F)

0.307 in (7.8 mm)

AMP04FSZ

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

900 µV

60 nA

Yes

1

50 dB

1.1 mA

-15 V

15 V

5/±15 V

Small Outline

SOP8,.25

20 nA

Instrumentation Amplifiers

0.12 V/us

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

700 kHz

e3

260 °C (500 °F)

0.193 in (4.9 mm)

LTC6915IDE#PBF

Analog Devices

Instrumentation Amplifier

Industrial

No Lead

12

HVSON

Rectangular

Plastic/Epoxy

0 V

10 µV

10 nA

Yes

1

85 dB

0 V

3 V

Small Outline, Heat Sink/Slug, Very Thin Profile

3 nA

Instrumentation Amplifiers

0.2 V/us

0.0015 %

11 V

0.02 in (0.5 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-N12

1

0.033 in (0.85 mm)

0.118 in (3 mm)

No

200 kHz

e3

30 s

260 °C (500 °F)

0.157 in (4 mm)

AD8420BRMZ

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

Yes

1

90 μA

±2.7/±18/2.7/36 V

Small Outline

TSSOP8,.19

Instrumentation Amplifiers

0.025 in (0.635 mm)

125 °C (257 °F)

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

No

e3

AD8420BRMZ-R7

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

Yes

1

90 μA

Tape And Reel, 7 Inch

±2.7/±18/2.7/36 V

Small Outline

TSSOP8,.19

Instrumentation Amplifiers

0.025 in (0.635 mm)

125 °C (257 °F)

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

No

e3

AD8278BRZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

200 µV

Yes

1

86 dB

250 μA

-15 V

Tape And Reel

15 V

±2/±18/2/36 V

Small Outline

SOP8,.25

Instrumentation Amplifiers

1.4 V/us

0.0012 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

550 kHz

e3

0.193 in (4.9 mm)

LT1789IS8-1#PBF

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

100 µV

40 nA

Yes

1

79 dB

-15 V

15 V

Small Outline

4 nA

Instrumentation Amplifiers

0.026 V/us

0.0025 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

No

60 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9025 mm)

AD8223ARMZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-12.5 V

400 µV

25 nA

Yes

1

74 dB

Bipolar

850 μA

-12 V

Tape And Reel

12 V

5,±12 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

2 nA

Instrumentation Amplifiers

0.3 V/us

12.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

5

-40 °C (-40 °F)

Matte Tin

10

Dual

S-PDSO-G8

1000

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

200 kHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LT1167AIS8

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

75 µV

600 pA

Yes

1

86 dB

-15 V

15 V

Small Outline

550 pA

Instrumentation Amplifiers

1.2 V/us

0.007 %

20 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

1 MHz

e0

0.193 in (4.9 mm)

LT1789IS8-1

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

100 µV

40 nA

Yes

1

79 dB

-15 V

15 V

Small Outline

4 nA

Instrumentation Amplifiers

0.026 V/us

0.0025 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

No

60 kHz

e0

0.193 in (4.9025 mm)

AD623BR

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-6 V

160 µV

27.5 nA

Yes

1

77 dB

625 μA

-5 V

5 V

5 V

Small Outline

SOP8,.25

2 nA

Instrumentation Amplifiers

0.3 V/us

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

800 kHz

e0

240 °C (464 °F)

0.193 in (4.9 mm)

AD8220WARMZ

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-18 V

250 µV

100 nA

Yes

1

AEC-Q100

72 dB

750 μA

-15 V

15 V

±5/±15 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Instrumentation Amplifiers

2 V/us

18 V

0.026 in (0.65 mm)

125 °C (257 °F)

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD8293G80ARJZ-R2

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

LSSOP

Rectangular

Plastic/Epoxy

50 µV

2 nA

Yes

1

94 dB

1.5 mA

5 V

5 V

Small Outline, Low Profile, Shrink Pitch

TSSOP8,.1

4 nA

Instrumentation Amplifiers

0.03 %

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

500 MHz

e3

260 °C (500 °F)

0.114 in (2.9 mm)

AD621BRZ

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

215 µV

1.5 nA

Yes

1

120 dB

Bipolar

1.6 mA

-15 V

15 V

±15 V

Small Outline

SOP8,.25

750 pA

Instrumentation Amplifiers

1.2 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

10

-40 °C (-40 °F)

Matte Tin

100

Dual

R-PDSO-G8

1

0.102 in (2.59 mm)

0.154 in (3.9 mm)

No

200 kHz

e3

260 °C (500 °F)

0.193 in (4.9 mm)

LTC2053IMS8#TR

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-5.5 V

20 µV

10 nA

Yes

1

95 dB

-5 V

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

3 nA

Instrumentation Amplifiers

0.2 V/us

0.001 %

5.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Tin Lead

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

0.118 in (3 mm)

ADA4254ARUZ

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

24

TSSOP

Rectangular

Plastic/Epoxy

-16 V

14 µV

14 nA

Yes

1

112 dB

-12 V

12 V

Small Outline, Thin Profile, Shrink Pitch

3.5 nA

Instrumentation Amplifiers

3.1 V/us

0.0015 %

16 V

0.026 in (0.65 mm)

105 °C (221 °F)

0.0625

-40 °C (-40 °F)

Matte Tin

1

Dual

R-PDSO-G24

128

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

1.8 MHz

e3

30 s

260 °C (500 °F)

0.307 in (7.8 mm)

ADA4254ARUZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

24

TSSOP

Rectangular

Plastic/Epoxy

-16 V

14 µV

14 nA

Yes

1

112 dB

-12 V

Tape And Reel

12 V

Small Outline, Thin Profile, Shrink Pitch

3.5 nA

Instrumentation Amplifiers

3.1 V/us

0.0015 %

16 V

0.026 in (0.65 mm)

105 °C (221 °F)

0.0625

-40 °C (-40 °F)

Matte Tin

1

Dual

R-PDSO-G24

128

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

1.8 MHz

e3

30 s

260 °C (500 °F)

0.307 in (7.8 mm)

LT1167IS8#TRPBF

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

100 µV

800 pA

Yes

1

81 dB

-15 V

Tape And Reel

15 V

Small Outline

700 pA

Instrumentation Amplifiers

1.2 V/us

0.01 %

20 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

1 MHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LT1168CS8#TRPBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

80 µV

600 pA

Yes

1

83 dB

-15 V

Tape And Reel

15 V

Small Outline

550 pA

Instrumentation Amplifiers

0.48 V/us

0.008 %

20 V

0.05 in (1.27 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Matte Tin

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

No

400 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9025 mm)

AD627BRZ-R7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

190 µV

10 nA

Yes

1

83 dB

-5 V

5 V

3/5/±5/±15 V

Small Outline

SOP8,.25

1 nA

Instrumentation Amplifiers

0.05 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

5

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

80 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD8278ARZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

500 µV

Yes

1

80 dB

250 μA

-15 V

Tape And Reel

15 V

±2/±18/2/36 V

Small Outline

SOP8,.25

Instrumentation Amplifiers

1.4 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

550 kHz

e3

0.193 in (4.9 mm)

LTC2053IDD#PBF

Analog Devices

Instrumentation Amplifier

Industrial

No Lead

8

HVSON

Square

Plastic/Epoxy

-5.5 V

20 µV

10 nA

Yes

1

95 dB

CMOS

-5 V

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

3 nA

Instrumentation Amplifiers

0.2 V/us

0.001 %

5.5 V

0.02 in (0.5 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-N8

1

0.031 in (0.8 mm)

0.118 in (3 mm)

No

200 kHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LTC2053IMS8-SYNC

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-5.5 V

20 µV

10 nA

Yes

1

95 dB

-5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

3 nA

Instrumentation Amplifiers

0.2 V/us

0.001 %

5.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Tin Lead

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

0.118 in (3 mm)

AD623ARM-REEL7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

-6 V

650 µV

27.5 nA

Yes

1

70 dB

625 μA

-5 V

Tape And Reel, 7 Inch

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

SSOP8,.19

2.5 nA

Instrumentation Amplifiers

0.3 V/us

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1000

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

800 kHz

e0

240 °C (464 °F)

0.118 in (3 mm)

LT1102CN8#PBF

Analog Devices

Instrumentation Amplifier

Commercial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-20 V

1.4 mV

400 pA

No

1

81 dB

-15 V

15 V

In-Line

220 pA

Instrumentation Amplifiers

17 V/us

0.0048 %

20 V

0.1 in (2.54 mm)

70 °C (158 °F)

10

0 °C (32 °F)

Matte Tin

Dual

R-PDIP-T8

100

1

0.155 in (3.937 mm)

0.3 in (7.62 mm)

No

3.5 MHz

e3

30 s

260 °C (500 °F)

LTC2053IMS8

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-5.5 V

20 µV

10 nA

Yes

1

95 dB

-5 V

5 V

Small Outline

3 nA

Instrumentation Amplifiers

0.2 V/us

0.001 %

5.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Tin Lead

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

0.118 in (3 mm)

Instrumentation Amplifiers

An instrumentation amplifier is an electronic circuit that amplifies small differential voltages to produce a larger output voltage signal. The main purpose of an instrumentation amplifier is to provide a high-precision and stable amplification of small signals while rejecting any common-mode noise or interference.

An instrumentation amplifier consists of three operational amplifiers (op-amps) and precision resistors. The first two op-amps are used as buffer amplifiers, and the third op-amp is used as a differential amplifier. The input signals are applied to the buffer amplifiers, which provide high input impedance and low output impedance to minimize loading effects. The differential amplifier then amplifies the difference between the two input signals, and the resulting output signal is proportional to the difference in voltage between the two input signals.

Instrumentation amplifiers are used in applications where small voltage signals need to be accurately measured or amplified. They are commonly used in industrial control systems, biomedical instrumentation, data acquisition systems, and audio equipment.

One advantage of an instrumentation amplifier is that it can be used to measure small differential voltages even in the presence of significant common-mode noise, which can be difficult to achieve with other types of amplifiers. Additionally, many instrumentation amplifiers offer a high level of accuracy, stability, and linearity, which makes them a popular choice for precision measurement applications.