Analog Devices Instrumentation Amplifiers 963

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Architecture Programmable Power Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Maximum Input Offset Current (IIO) Minimum Slew Rate Sub-Category Nominal Slow Rate Maximum Non Linearity Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Frequency Compensation Minimum Voltage Gain Minimum Operating Temperature Terminal Finish Nominal Voltage Gain Terminal Position Low-Offset JESD-30 Code Maximum Voltage Gain Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

AD621ARZ

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

185 µV

2.5 nA

Yes

1

110 dB

Bipolar

1.6 mA

-15 V

15 V

±15 V

Small Outline

SOP8,.25

1.5 nA

Instrumentation Amplifiers

1.2 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

10

-40 °C (-40 °F)

Matte Tin

100

Dual

R-PDSO-G8

1

0.102 in (2.59 mm)

0.154 in (3.9 mm)

No

200 kHz

e3

40 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD621ARZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

185 µV

2.5 nA

Yes

1

110 dB

Bipolar

1.6 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP8,.25

1.5 nA

Instrumentation Amplifiers

1.2 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

10

-40 °C (-40 °F)

Matte Tin

100

Dual

R-PDSO-G8

1

0.102 in (2.59 mm)

0.154 in (3.9 mm)

No

200 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LTC1100CN8#PBF

Analog Devices

Instrumentation Amplifier

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-9 V

10 µV

135 pA

No

1

90 dB

CMOS

-5 V

5 V

In-Line

65 pA

Instrumentation Amplifiers

0.006 %

9 V

0.1 in (2.54 mm)

85 °C (185 °F)

10

-40 °C (-40 °F)

Matte Tin

Dual

R-PDIP-T8

100

1

0.155 in (3.937 mm)

0.3 in (7.62 mm)

No

18 kHz

e3

30 s

260 °C (500 °F)

AD8224BCPZ-R7

Analog Devices

Instrumentation Amplifier

Industrial

No Lead

16

HVQCCN

Square

-18 V

175 µV

10 pA

Yes

2

86 dB

750 μA

-15 V

15 V

±15 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.16SQ,25

0.6 pA

Instrumentation Amplifiers

0.025 %

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Quad

S-XQCC-N16

1000

3

0.031 in (0.8 mm)

0.157 in (4 mm)

No

1.5 MHz

e3

260 °C (500 °F)

0.157 in (4 mm)

AD8228ARZ

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

Yes

1

1.2 mA

-15 V

15 V

±15 V

Small Outline

SOP8,.25

Instrumentation Amplifiers

0.05 in (1.27 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

No

e3

260 °C (500 °F)

LT1168AIN8#PBF

Analog Devices

Instrumentation Amplifier

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-20 V

75 µV

500 pA

No

1

86 dB

-15 V

15 V

In-Line

550 pA

Instrumentation Amplifiers

0.41 V/us

0.007 %

20 V

0.1 in (2.54 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDIP-T8

10000

1

0.155 in (3.937 mm)

0.3 in (7.62 mm)

No

400 kHz

e3

30 s

260 °C (500 °F)

AD8228ARMZ

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

Yes

1

1.2 mA

-15 V

15 V

±15 V

Small Outline

TSSOP8,.19

Instrumentation Amplifiers

0.025 in (0.635 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

No

e3

30 s

260 °C (500 °F)

AD8228ARMZ-R7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

Yes

1

1.2 mA

-15 V

Tape And Reel, 7 Inch

15 V

±15 V

Small Outline

TSSOP8,.19

Instrumentation Amplifiers

0.025 in (0.635 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

No

e3

30 s

260 °C (500 °F)

AD8228ARZ-R7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

Yes

1

1.2 mA

-15 V

15 V

±15 V

Small Outline

SOP8,.25

Instrumentation Amplifiers

0.05 in (1.27 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

No

e3

30 s

260 °C (500 °F)

AD8228BRMZ

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-18 V

50 µV

600 pA

Yes

1

100 dB

1.2 mA

-15 V

15 V

±15 V

Small Outline

TSSOP8,.19

400 pA

Instrumentation Amplifiers

2.5 V/us

0.001 %

18 V

0.026 in (0.65 mm)

125 °C (257 °F)

0.9999

-40 °C (-40 °F)

Matte Tin

1

Dual

S-PDSO-G8

1.0001

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

650 kHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD8228BRMZ-R7

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-18 V

50 µV

600 pA

Yes

1

100 dB

1.2 mA

-15 V

Tape And Reel, 7 Inch

15 V

±15 V

Small Outline

TSSOP8,.19

400 pA

Instrumentation Amplifiers

2.5 V/us

0.001 %

18 V

0.026 in (0.65 mm)

125 °C (257 °F)

0.9999

-40 °C (-40 °F)

Matte Tin

1

Dual

S-PDSO-G8

1.0001

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

650 kHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD8228BRMZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

Yes

1

1.2 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

TSSOP8,.19

Instrumentation Amplifiers

0.025 in (0.635 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

No

e3

30 s

260 °C (500 °F)

AD8228BRZ-R7

Analog Devices

Instrumentation Amplifier

Instrumentation Amplifiers

Matte Tin

1

e3

30 s

260 °C (500 °F)

LTC2053HDD#TRPBF

Analog Devices

Instrumentation Amplifier

Automotive

No Lead

8

HVSON

Square

Plastic/Epoxy

-5.5 V

20 µV

10 nA

Yes

1

90 dB

CMOS

-5 V

Tape And Reel

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

3 nA

Instrumentation Amplifiers

0.2 V/us

0.001 %

5.5 V

0.02 in (0.5 mm)

125 °C (257 °F)

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-N8

1

0.031 in (0.8 mm)

0.118 in (3 mm)

No

200 kHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LTC2053IDD#TRPBF

Analog Devices

Instrumentation Amplifier

Industrial

No Lead

8

HVSON

Square

Plastic/Epoxy

-5.5 V

20 µV

10 nA

Yes

1

95 dB

CMOS

-5 V

Tape And Reel

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

3 nA

Instrumentation Amplifiers

0.2 V/us

0.001 %

5.5 V

0.02 in (0.5 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-N8

1

0.031 in (0.8 mm)

0.118 in (3 mm)

No

200 kHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LTC6910-1CTS8#PBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

VSSOP

Rectangular

Plastic/Epoxy

-5.5 V

15 mV

Yes

1

-5 V

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Instrumentation Amplifiers

16 V/us

5.5 V

0.026 in (0.65 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Matte Tin - annealed

2

Dual

R-PDSO-G8

100

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

LTC6915IDE#TR

Analog Devices

Instrumentation Amplifier

Industrial

No Lead

12

HVSON

Rectangular

Plastic/Epoxy

0 V

10 µV

10 nA

Yes

1

85 dB

0 V

Tape And Reel

3 V

Small Outline, Heat Sink/Slug, Very Thin Profile

3 nA

Instrumentation Amplifiers

0.2 V/us

0.0015 %

11 V

0.02 in (0.5 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-N12

1

0.033 in (0.85 mm)

0.118 in (3 mm)

No

200 kHz

e0

0.157 in (4 mm)

5962-9563901MGA

Analog Devices

Instrumentation Amplifier

Military

Wire

8

Round

Metal

-18 V

1.5 mV

No

1

75 dB

Bipolar

MIL-STD-883

4 mA

-15 V

15 V

±15 V

Cylindrical

CAN8,.2

Instrumentation Amplifiers

9.5 V/us

0.02 %

18 V

125 °C (257 °F)

-55 °C (-67 °F)

1

Bottom

O-MBCY-W8

No

3 MHz

AD522SD/883B

Analog Devices

Instrumentation Amplifier

Military

Pin/Peg

14

DIP

Rectangular

Ceramic, Metal-Sealed Cofired

-18 V

200 µV

25 nA

No

1

75 dB

Bipolar

38535Q/M;38534H;883B

8 mA

-15 V

15 V

±15 V

In-Line

DIP14,.3

20 nA

Instrumentation Amplifiers

0.1 V/us

0.005 %

18 V

0.1 in (2.54 mm)

125 °C (257 °F)

1

-55 °C (-67 °F)

Gold

Dual

R-CDIP-P14

1000

0.22 in (5.59 mm)

0.3 in (7.62 mm)

No

300 kHz

e4

0.868 in (22.05 mm)

AD8222HACPZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

No Lead

16

HVQCCN

Square

-18 V

150 µV

3 nA

Yes

2

80 dB

1.2 mA

-15 V

Tape And Reel

15 V

±15 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.16SQ,25

1.5 nA

Instrumentation Amplifiers

2.5 V/us

0.002 %

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

100

Quad

S-XQCC-N16

10000

3

0.039 in (1 mm)

0.157 in (4 mm)

No

1 MHz

e3

30 s

260 °C (500 °F)

0.157 in (4 mm)

AD8223ARZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-12.5 V

400 µV

25 nA

Yes

1

74 dB

Bipolar

850 μA

-12 V

Tape And Reel

12 V

5,±12 V

Small Outline

SOP8,.25

2 nA

Instrumentation Amplifiers

0.3 V/us

12.5 V

0.05 in (1.27 mm)

85 °C (185 °F)

5

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

200 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD8224HACPZ-WP

Analog Devices

Instrumentation Amplifier

Industrial

No Lead

16

VQCCN

Square

-18 V

300 µV

25 pA

Yes

2

78 dB

-15 V

15 V

Chip Carrier, Very Thin Profile

2 pA

Instrumentation Amplifiers

0.025 %

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

2

-40 °C (-40 °F)

Matte Tin

10

Quad

S-XQCC-N16

1000

3

0.039 in (1 mm)

0.157 in (4 mm)

1.5 MHz

e3

0.157 in (4 mm)

AD8224HBCPZ-R7

Analog Devices

Instrumentation Amplifier

Industrial

No Lead

16

VQCCN

Square

-18 V

175 µV

10 pA

Yes

2

56 dB

-15 V

15 V

Chip Carrier, Very Thin Profile

0.6 pA

Instrumentation Amplifiers

0.025 %

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

2

-40 °C (-40 °F)

Matte Tin

10

Quad

S-XQCC-N16

1000

3

0.039 in (1 mm)

0.157 in (4 mm)

1.5 MHz

e3

30 s

260 °C (500 °F)

0.157 in (4 mm)

AD8224HBCPZ-WP

Analog Devices

Instrumentation Amplifier

Industrial

No Lead

16

VQCCN

Square

-18 V

175 µV

10 pA

Yes

2

56 dB

-15 V

15 V

Chip Carrier, Very Thin Profile

0.6 pA

Instrumentation Amplifiers

0.025 %

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

2

-40 °C (-40 °F)

Matte Tin

10

Quad

S-XQCC-N16

1000

3

0.039 in (1 mm)

0.157 in (4 mm)

1.5 MHz

e3

0.157 in (4 mm)

AD8278BRMZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-18 V

200 µV

Yes

1

86 dB

250 μA

-15 V

Tape And Reel

15 V

±2/±18/2/36 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Instrumentation Amplifiers

1.4 V/us

0.0012 %

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

550 kHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD8295BCPZ-R7

Analog Devices

Instrumentation Amplifier

Industrial

No Lead

16

VQCCN

Square

-18 V

80 µV

1.5 nA

Yes

1

90 dB

2.5 mA

-15 V

15 V

±15 V

Chip Carrier, Very Thin Profile

LCC16,.16SQ,25

600 pA

Instrumentation Amplifiers

2.5 V/us

0.002 %

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Quad

S-XQCC-N16

1000

3

0.039 in (1 mm)

0.157 in (4 mm)

No

1.2 MHz

e3

260 °C (500 °F)

0.157 in (4 mm)

AD8295BCPZ-WP

Analog Devices

Instrumentation Amplifier

Automotive

No Lead

16

VQCCN

Square

-18 V

60 µV

800 pA

Yes

1

100 dB

2.5 mA

-15 V

15 V

±15 V

Chip Carrier

LCC16,.16SQ,25

500 pA

Instrumentation Amplifiers

2 V/us

0.002 %

18 V

0.026 in (0.65 mm)

125 °C (257 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Quad

S-XQCC-N16

1000

3

0.039 in (1 mm)

0.157 in (4 mm)

No

1.2 MHz

e3

260 °C (500 °F)

0.157 in (4 mm)

AD8428BRZ

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

Yes

1

Bipolar

8 mA

-15 V

15 V

±15 V

Small Outline

SOP8,.25

Instrumentation Amplifiers

0.05 in (1.27 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

No

e3

30 s

260 °C (500 °F)

AD8428BRZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

Yes

1

Bipolar

8 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP8,.25

Instrumentation Amplifiers

0.05 in (1.27 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

No

e3

30 s

260 °C (500 °F)

AMP02FPZ

Analog Devices

Instrumentation Amplifier

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-18 V

350 µV

20 nA

No

1

70 dB

-15 V

15 V

In-Line

10 nA

Instrumentation Amplifiers

6 V/us

18 V

0.1 in (2.54 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDIP-T8

10000

0.18 in (4.57 mm)

0.3 in (7.62 mm)

No

1.2 MHz

e3

0.365 in (9.27 mm)

AMP04ES

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

600 µV

50 nA

Yes

1

55 dB

1.1 mA

-15 V

15 V

5/±15 V

Small Outline

SOP8,.25

15 nA

Instrumentation Amplifiers

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

700 kHz

e0

240 °C (464 °F)

0.193 in (4.9 mm)

AMP04FS

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

900 µV

60 nA

Yes

1

50 dB

1.1 mA

-15 V

15 V

5/±15 V

Small Outline

SOP8,.25

20 nA

Instrumentation Amplifiers

0.12 V/us

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

700 kHz

e0

240 °C (464 °F)

0.193 in (4.9 mm)

AMP04FS-REEL7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

900 µV

60 nA

Yes

1

50 dB

1.1 mA

-15 V

Tape And Reel, 7 Inch

15 V

5/±15 V

Small Outline

SOP8,.25

20 nA

Instrumentation Amplifiers

0.12 V/us

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

700 kHz

e0

240 °C (464 °F)

0.193 in (4.9 mm)

LT1789CS8-10

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

160 µV

40 nA

Yes

1

88 dB

-15 V

15 V

Small Outline

4 nA

Instrumentation Amplifiers

0.066 V/us

0.0045 %

18 V

0.05 in (1.27 mm)

70 °C (158 °F)

10

0 °C (32 °F)

Tin Lead

100

Dual

R-PDSO-G8

1000

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

No

e0

0.193 in (4.9025 mm)

LTC2053CDD#TRPBF

Analog Devices

Instrumentation Amplifier

Commercial

No Lead

8

HVSON

Square

Plastic/Epoxy

-5.5 V

20 µV

10 nA

Yes

1

105 dB

CMOS

-5 V

Tape And Reel

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

3 nA

Instrumentation Amplifiers

0.2 V/us

0.001 %

5.5 V

0.02 in (0.5 mm)

70 °C (158 °F)

0 °C (32 °F)

Matte Tin

Dual

S-PDSO-N8

1

0.031 in (0.8 mm)

0.118 in (3 mm)

No

200 kHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LTC2053CMS8

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-5.5 V

20 µV

10 nA

Yes

1

105 dB

-5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

3 nA

Instrumentation Amplifiers

0.2 V/us

0.001 %

5.5 V

0.026 in (0.65 mm)

70 °C (158 °F)

0 °C (32 °F)

Tin Lead

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

0.118 in (3 mm)

LTC2053CMS8-SYNC#PBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-5.5 V

20 µV

10 nA

Yes

1

100 dB

CMOS

-5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

3 nA

Instrumentation Amplifiers

0.2 V/us

0.001 %

5.5 V

0.026 in (0.65 mm)

70 °C (158 °F)

0 °C (32 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

200 kHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LTC6910-1CTS8#TRMPBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

VSSOP

Rectangular

Plastic/Epoxy

-5.5 V

1.5 mV

Yes

1

-5 V

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Instrumentation Amplifiers

16 V/us

5.5 V

0.026 in (0.65 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Matte Tin

2

Dual

R-PDSO-G8

100

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

LTC6915IGN

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

0 V

10 µV

10 nA

Yes

1

85 dB

0 V

3 V

Small Outline, Shrink Pitch

3 nA

Instrumentation Amplifiers

0.2 V/us

0.0015 %

11 V

0.025 in (0.635 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G16

1

0.068 in (1.727 mm)

0.154 in (3.899 mm)

No

200 kHz

e0

0.193 in (4.8895 mm)

LTC6915IGN#TR

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

0 V

10 µV

10 nA

Yes

1

85 dB

0 V

Tape And Reel

3 V

Small Outline, Shrink Pitch

3 nA

Instrumentation Amplifiers

0.2 V/us

0.0015 %

11 V

0.025 in (0.635 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G16

1

0.068 in (1.727 mm)

0.154 in (3.899 mm)

No

200 kHz

e0

0.193 in (4.8895 mm)

MAX41400ANL+T

Analog Devices

Instrumentation Amplifier

Ball

9

VFBGA

Rectangular

Plastic/Epoxy

35 µV

300 pA

Yes

1

106 dB

90 μA

Tape And Reel

1.8 V

Grid Array, Very Thin Profile, Fine Pitch

BGA9,3X3,16

0.08 V/us

4 V

0.016 in (0.4 mm)

125 °C (257 °F)

10

-40 °C (-40 °F)

Tin/Silver/Copper/Nickel

40

Bottom

R-PBGA-B9

200

1

0.02 in (0.5 mm)

0.048 in (1.228 mm)

28 kHz

e2

30 s

260 °C (500 °F)

0.05 in (1.258 mm)

MAX4462HESA+

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

750 µV

100 pA

Yes

1

80 dB

BICMOS

1 mA

0 V

5 V

3/5 V

Small Outline

SOP8,.25

Instrumentation Amplifiers

0.25 V/us

0.25 %

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin - annealed

100

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

25 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

MAX4462HESA+T

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-0.3 V

750 µV

100 pA

Yes

1

80 dB

BICMOS

1 mA

0 V

3 V

3/5 V

Small Outline

SOP8,.25

Instrumentation Amplifiers

0.5 V/us

0.25 %

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin - annealed

10

Dual

R-PDSO-G8

100

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

2.5 MHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

MAX4462HETT+

Analog Devices

Instrumentation Amplifier

Instrumentation Amplifiers

Matte Tin - annealed

1

e3

30 s

260 °C (500 °F)

MAX4462HEUT+

Analog Devices

Instrumentation Amplifier

Instrumentation Amplifiers

Matte Tin - annealed

1

e3

30 s

260 °C (500 °F)

MAX4462HEUT+T

Analog Devices

Instrumentation Amplifier

Instrumentation Amplifiers

Matte Tin - annealed

1

e3

30 s

260 °C (500 °F)

MAX4462TETT+

Analog Devices

Instrumentation Amplifier

Instrumentation Amplifiers

Matte Tin - annealed

1

e3

30 s

260 °C (500 °F)

MAX4462TETT+T

Analog Devices

Instrumentation Amplifier

Industrial

No Lead

6

HVSON

Square

1.3 mV

100 pA

Yes

1

80 dB

BICMOS

1.1 mA

0 V

5 V

3/5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC6,.12,38

Instrumentation Amplifiers

0.5 V/us

0.25 %

6 V

0.037 in (0.95 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin - annealed

10

Dual

S-XDSO-N6

100

1

0.031 in (0.8 mm)

0.118 in (3 mm)

No

2.5 MHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

Instrumentation Amplifiers

An instrumentation amplifier is an electronic circuit that amplifies small differential voltages to produce a larger output voltage signal. The main purpose of an instrumentation amplifier is to provide a high-precision and stable amplification of small signals while rejecting any common-mode noise or interference.

An instrumentation amplifier consists of three operational amplifiers (op-amps) and precision resistors. The first two op-amps are used as buffer amplifiers, and the third op-amp is used as a differential amplifier. The input signals are applied to the buffer amplifiers, which provide high input impedance and low output impedance to minimize loading effects. The differential amplifier then amplifies the difference between the two input signals, and the resulting output signal is proportional to the difference in voltage between the two input signals.

Instrumentation amplifiers are used in applications where small voltage signals need to be accurately measured or amplified. They are commonly used in industrial control systems, biomedical instrumentation, data acquisition systems, and audio equipment.

One advantage of an instrumentation amplifier is that it can be used to measure small differential voltages even in the presence of significant common-mode noise, which can be difficult to achieve with other types of amplifiers. Additionally, many instrumentation amplifiers offer a high level of accuracy, stability, and linearity, which makes them a popular choice for precision measurement applications.